treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with c

treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

tty: moxa: carve out special ioctls and extra tty_port

These ioctls are undocumented and not exposed -- they are defined
locally. Given they need a special tty_port just for them, this is very
ugly.

tty: moxa: carve out special ioctls and extra tty_port

These ioctls are undocumented and not exposed -- they are defined
locally. Given they need a special tty_port just for them, this is very
ugly. So drop this whole functionality. It is barely used for something
real. (And if it is, we'd need a common functionality to all drivers.)

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: drop ISA support

I doubt anyone actually uses this driver (unlike mxser.c and serial
moxa driven devices). Even less there is anyone with a moxa ISA card.
The newer mxser dropped the supp

tty: moxa: drop ISA support

I doubt anyone actually uses this driver (unlike mxser.c and serial
moxa driven devices). Even less there is anyone with a moxa ISA card.
The newer mxser dropped the support for ISA in 2021. Let this moxa
follow now.

Good diet.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: drop version dump to logs

The arbitrary MOXA_VERSION is dumped to the logs when the driver is
loaded. Avoid this as a driver should be silent unless something breaks.

Signed-off-by: Jiri

tty: moxa: drop version dump to logs

The arbitrary MOXA_VERSION is dumped to the logs when the driver is
loaded. Avoid this as a driver should be silent unless something breaks.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: convert to u8 and size_t

Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kern

tty: moxa: convert to u8 and size_t

Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: make tty_operations::write()'s count size_t

Unify with the rest of the code. Use size_t for counts and ssize_t for
retval.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https

tty: make tty_operations::write()'s count size_t

Unify with the rest of the code. Use size_t for counts and ssize_t for
retval.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: propagate u8 data to tty_operations::write()

Data are now typed as u8. Propagate this change to
tty_operations::write().

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: Richard H

tty: propagate u8 data to tty_operations::write()

Data are now typed as u8. Propagate this change to
tty_operations::write().

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Vaibhav Gupta <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alex Elder <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: Rename dtr/rts parameters/variables to active

Use active consistently for naming parameters and variables.

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Ilpo Järvinen <il

tty: moxa: Rename dtr/rts parameters/variables to active

Use active consistently for naming parameters and variables.

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Convert ->dtr_rts() to take bool argument

Convert the raise/on parameter in ->dtr_rts() to bool through the
callchain. The parameter is used like bool. In USB serial, there
remains a few implic

tty: Convert ->dtr_rts() to take bool argument

Convert the raise/on parameter in ->dtr_rts() to bool through the
callchain. The parameter is used like bool. In USB serial, there
remains a few implicit bool -> larger type conversions because some
devices use u8 in their control messages.

In moxa_tiocmget(), dtr variable was reused for line status which
requires int so use a separate variable for status.

Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Convert ->carrier_raised() and callchains to bool

Return boolean from ->carrier_raised() instead of 0 and 1. Make the
return type change also to tty_port_carrier_raised() that makes the
->carri

tty: Convert ->carrier_raised() and callchains to bool

Return boolean from ->carrier_raised() instead of 0 and 1. Make the
return type change also to tty_port_carrier_raised() that makes the
->carrier_raised() call (+ cd variable in moxa into which its return
value is stored).

Also cleans up a few unnecessary constructs related to this change:

return xx ? 1 : 0;
-> return xx;

if (xx)
return 1;
return 0;
-> return xx;

Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: Make local var storing tty_port_initialized() bool

Return type of tty_port_initialized() is bool, use matching type for
the local variable.

Also reorder the local vars to reverse-xmas-tr

tty: moxa: Make local var storing tty_port_initialized() bool

Return type of tty_port_initialized() is bool, use matching type for
the local variable.

Also reorder the local vars to reverse-xmas-tree while at it.

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Cleanup tty_port_set_initialized() bool parameter

Make callers pass true/false consistently for bool val.

Reviewed-by: Samuel Iglesias Gonsalvez <[email protected]>
Reviewed-by: Jiri Slaby

tty: Cleanup tty_port_set_initialized() bool parameter

Make callers pass true/false consistently for bool val.

Reviewed-by: Samuel Iglesias Gonsalvez <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed

tty: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: drivers/tty/, stop using tty_schedule_flip()

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remo

tty: drivers/tty/, stop using tty_schedule_flip()

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remove the latter (as it is used less), so call the former in
drivers/tty/.

Cc: Vladimir Zapolskiy <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: merge moxa.h into moxa.c

There is no need for existence of a separate header for Moxa's Intellio
cards. Merge it into moxa.c to clean up the tty dir a bit.

Signed-off-by: Jiri Slaby <jsl

tty: moxa: merge moxa.h into moxa.c

There is no need for existence of a separate header for Moxa's Intellio
cards. Merge it into moxa.c to clean up the tty dir a bit.

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: use semi-colons instead of commas

This code works but it's cleaner to use a semi-colon to end a statement
instead of a comma.

Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: D

tty: moxa: use semi-colons instead of commas

This code works but it's cleaner to use a semi-colon to end a statement
instead of a comma.

Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210825072405.GA13013@kili
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: drop put_tty_driver

put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_

tty: drop put_tty_driver

put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_driver_kref_put() and remove the former
for good.

Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alex Elder <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Acked-by: Alex Elder <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: David Sterba <[email protected]>
Acked-by: Samuel Iglesias Gonsálvez <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: make tty_operations::chars_in_buffer return uint

tty_operations::chars_in_buffer is another hook which is expected to
return values >= 0. So make it explicit by the return type too -- use
unsig

tty: make tty_operations::chars_in_buffer return uint

tty_operations::chars_in_buffer is another hook which is expected to
return values >= 0. So make it explicit by the return type too -- use
unsigned int.

Signed-off-by: Jiri Slaby <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Acked-by: David Sterba <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alex Elder <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: make tty_operations::write_room return uint

Line disciplines expect a positive value or zero returned from
tty->ops->write_room (invoked by tty_write_room). So make this
assumption explicit by

tty: make tty_operations::write_room return uint

Line disciplines expect a positive value or zero returned from
tty->ops->write_room (invoked by tty_write_room). So make this
assumption explicit by using unsigned int as a return value. Both of
tty->ops->write_room and tty_write_room.

Signed-off-by: Jiri Slaby <[email protected]>
Acked-by: Laurentiu Tudor <[email protected]>
Acked-by: Alex Elder <[email protected]>
Acked-by: Max Filippov <[email protected]> # xtensa
Acked-by: David Sterba <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: cumulate and document tty_struct::flow* members

Group the flow flags under a single struct called flow. The new struct
contains 'stopped' and 'tco_stopped' bools which used to be bits in a
bitf

tty: cumulate and document tty_struct::flow* members

Group the flow flags under a single struct called flow. The new struct
contains 'stopped' and 'tco_stopped' bools which used to be bits in a
bitfield. The struct also contains the lock protecting them to
potentially share the same cache line.

Note that commit c545b66c6922b (tty: Serialize tcflow() with other tty
flow control changes) added a padding to the original bitfield. It was
for the bitfield to occupy a whole 64b word to avoid interferring stores
on Alpha (cannot we evaporate this arch with weird implications to C
code yet?). But it doesn't work as expected as the padding
(tty_struct::unused) is aligned to a 8B boundary too and occupies some
bytes from the next word.

So make it reliable by:
1) setting __aligned of the struct -- that aligns the start, and
2) making 'unsigned long unused[0]' as the last member of the struct --
pads the end.

This is also the perfect time to start the documentation of tty_struct
where all this lives. So we start by documenting what these bools
actually serve for. And why we do all the alignment dances. Only the few
up-to-date information from the Theodore's comment made it into this new
Kerneldoc comment.

Signed-off-by: Jiri Slaby <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: fix TIOCSSERIAL implementation

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait paramete

tty: moxa: fix TIOCSSERIAL implementation

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the moxa implementation which was returning -EPERM also for a
privileged user when trying to change certain unsupported parameters and
instead return success consistently.

Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: fix TIOCSSERIAL permission check

Changing the port close delay or type are privileged operations so make
sure to return -EPERM if a regular user tries to change them.

Cc: [email protected]

tty: moxa: fix TIOCSSERIAL permission check

Changing the port close delay or type are privileged operations so make
sure to return -EPERM if a regular user tries to change them.

Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: moxa: fix TIOCSSERIAL jiffies conversions

The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.

Add t

tty: moxa: fix TIOCSSERIAL jiffies conversions

The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.

Add the missing conversions so that TIOCGSERIAL works as expected also
when HZ is not 100.

Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: do not check tty_unregister_driver's return value

These drivers check tty_unregister_driver return value. But they don't
handle a failure correctly (they free the driver in any case). So stop
c

tty: do not check tty_unregister_driver's return value

These drivers check tty_unregister_driver return value. But they don't
handle a failure correctly (they free the driver in any case). So stop
checking tty_unregister_driver return value and remove also the prints.

In the next patch, tty_unregister_driver's return type will be switched
to void.

Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: [email protected]
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Reviewed-by: Max Filippov <[email protected]>
Acked-by: David Sterba <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Chr

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>

show more ...