scsi: message: fusion: Add HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
d

scsi: message: fusion: Add HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.

Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

scsi: use 'depends' instead of 'select' for SCSI_FC_ATTRS

There are other kconfig symbols which use SCSI_FC_ATTRS.
In order to maintain sanity and prevent kconfig warnings, change
all of these from

scsi: use 'depends' instead of 'select' for SCSI_FC_ATTRS

There are other kconfig symbols which use SCSI_FC_ATTRS.
In order to maintain sanity and prevent kconfig warnings, change
all of these from using 'select' to using 'depends on' so that
proper symbol dependencies will be honored and circular depends
problems will be avoided.
This fixes kconfig warnings and build errors:

warning: (LIBFC && SCSI_IBMVFC && SCSI_QLA_FC && SCSI_LPFC && ZFCP && SCSI_BFA_FC && SCSI_CHELSIO_FCOE && FUSION_FC) selects SCSI_FC_ATTRS which has unmet direct dependencies (SCSI && NET)
drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_event':
drivers/scsi/scsi_transport_fc.c:543:7: error: 'scsi_nl_sock' undeclared (first use in this function)
drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_vendor_event':
drivers/scsi/scsi_transport_fc.c:611:7: error: 'scsi_nl_sock' undeclared (first use in this function)

Reported-by: Fengguang Wu <[email protected]> [0-day test robot]
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[SCSI] mpt fusion: Kconfig cleanup

Adding 949X, 949E, and 1078 to Kconfig. Adding "depends on FUSION"
required in the FUSION_LOGGING section, and fixing a spelling error.

Signed-off-by: Eric Moore

[SCSI] mpt fusion: Kconfig cleanup

Adding 949X, 949E, and 1078 to Kconfig. Adding "depends on FUSION"
required in the FUSION_LOGGING section, and fixing a spelling error.

Signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mpt fusion: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-

[SCSI] mpt fusion: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <[email protected]>
Acked-by: "Moore, Eric Dean" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030

Per request from Matthew Wilcox - using PCI_VENDOR_ATTO.

Add support for ATTO UL4D, they are rebranded 53C1030.
The changes are
1.

[SCSI] mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030

Per request from Matthew Wilcox - using PCI_VENDOR_ATTO.

Add support for ATTO UL4D, they are rebranded 53C1030.
The changes are
1. Adding a new PCI vendor ID in pci table
2. The spi_port_page_2 is in different format than that of LSI generic
spi_port_page_2 and hence mapping code is added.

signed-off-by: Sathya Prakash <[email protected]>
signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h

This patch adds a new file mptdebug.h in the fusion source directory,
which contains different debug mac

[SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h

This patch adds a new file mptdebug.h in the fusion source directory,
which contains different debug macros. The existing debug macros and
flags are removed from the mptbase.h and Makefile In Kconfig a new
configuration parameter FUSION_LOGGING is added to enable/disable the
logging support during compile time.

signed-off-by: Sathya Prakash <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mpt fusion: update Kconfig help

Update help in Kconfig for mptfc driver to indicate the driver supports
Brocade FC 4G HBA.

signed-off-by: Gwendal Grignou <[email protected]>
Acked-by: Eri

[SCSI] mpt fusion: update Kconfig help

Update help in Kconfig for mptfc driver to indicate the driver supports
Brocade FC 4G HBA.

signed-off-by: Gwendal Grignou <[email protected]>
Acked-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[S390] Kconfig: refine depends statements.

Refine some depends statements to limit their visibility to the
environments that are actually supported.

Signed-off-by: Martin Schwidefsky <schwidefsky@d

[S390] Kconfig: refine depends statements.

Refine some depends statements to limit their visibility to the
environments that are actually supported.

Signed-off-by: Martin Schwidefsky <[email protected]>

show more ...

[SCSI] mptctl for mptsas

This patch makes the mptctl pass through available if
the mptsas driver is selected. Without this patch
if mptsas is the only fusion driver chosen, then
the mptctl is not pr

[SCSI] mptctl for mptsas

This patch makes the mptctl pass through available if
the mptsas driver is selected. Without this patch
if mptsas is the only fusion driver chosen, then
the mptctl is not presented as an option.

smp_utils uses the mptctl driver to pass SAS SMP
functions through a MPT SAS HBA.

Signed-off-by: Douglas Gilbert <[email protected]>
Acked-by: "Moore, Eric" <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mptfusion: misc fix's

* removing obsolete 1066, 1066E from Kconfig
* initializing aen_event_read_flag after host reset
* remove oem references
* remove obsolete mpt_pq_filter command line opt

[SCSI] mptfusion: misc fix's

* removing obsolete 1066, 1066E from Kconfig
* initializing aen_event_read_flag after host reset
* remove oem references
* remove obsolete mpt_pq_filter command line option

Signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mptspi: Add transport class Domain Validation

This is the first half of a patch to add the generic domain validation
to mptspi. It also creates a secondary "virtual" channel for raid
compone

[SCSI] mptspi: Add transport class Domain Validation

This is the first half of a patch to add the generic domain validation
to mptspi. It also creates a secondary "virtual" channel for raid
component devices since these are now exported with no_uld_attach.

What Eric and I would have really liked is to export all physical
components on channel 0 and all raid components on channel 1.
Unfortunately, this would result in device renumbering on platforms with
mixed RAID/Physical devices which was considered unacceptable for
userland stability reasons.

Still to be done is to plug back the extra parameter setting and DV
pieces on reset and hotplug.

Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mptfc: need to select transport attrs

Now that mptfc actually uses the transport class, it can't be built
without it.

Signed-off-by: James Bottomley <[email protected]>

[SCSI] fusion SAS support (mptsas driver)

Adds the actual mptsas driver, based upon the LSI driver with new work
for SAS transport class integration from Eric Moore and me.

This obviously depends o

[SCSI] fusion SAS support (mptsas driver)

Adds the actual mptsas driver, based upon the LSI driver with new work
for SAS transport class integration from Eric Moore and me.

This obviously depends on the SAS transport class.

Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] fusion-kconfig-cleanup

* This patch clarifies help section in FUSION_MAX_SGE entry.

Signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]

[SCSI] fusion-kconfig-cleanup

* This patch clarifies help section in FUSION_MAX_SGE entry.

Signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mptfusion: correct Kconfig problem

The fusion Kconfig forgets to set CONFIG_FUSION, which is required to
get the upper makefile to descend into the fusion directory. Add this
back as a varia

[SCSI] mptfusion: correct Kconfig problem

The fusion Kconfig forgets to set CONFIG_FUSION, which is required to
get the upper makefile to descend into the fusion directory. Add this
back as a variable and make the two upper level modules select it.

Signed-off-by: James Bottomley <[email protected]>

show more ...

[SCSI] mptfusion: Kconfig Adding new bus type drivers for fusion drivers.

(1) Kconfig - added new mptspi and mptfc scsi lld drivers
(2) Kconfig - increased MAX_SGE from 40 to 128
(2) Makefile - com

[SCSI] mptfusion: Kconfig Adding new bus type drivers for fusion drivers.

(1) Kconfig - added new mptspi and mptfc scsi lld drivers
(2) Kconfig - increased MAX_SGE from 40 to 128
(2) Makefile - compilation support for split drivers
(3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others

Signed-off-by: Eric Moore <[email protected]>
Signed-off-by: James Bottomley <[email protected]>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...