1 2menu "Fusion MPT device support" 3 4config FUSION 5 bool 6 default n 7 8config FUSION_SPI 9 tristate "Fusion MPT ScsiHost drivers for SPI" 10 depends on PCI && SCSI 11 select FUSION 12 ---help--- 13 SCSI HOST support for a parallel SCSI host adapters. 14 15 List of supported controllers: 16 17 LSI53C1020 18 LSI53C1020A 19 LSI53C1030 20 LSI53C1035 21 22config FUSION_FC 23 tristate "Fusion MPT ScsiHost drivers for FC" 24 depends on PCI && SCSI 25 select FUSION 26 ---help--- 27 SCSI HOST support for a Fiber Channel host adapters. 28 29 List of supported controllers: 30 31 LSIFC909 32 LSIFC919 33 LSIFC919X 34 LSIFC929 35 LSIFC929X 36 LSIFC929XL 37 38config FUSION_MAX_SGE 39 int "Maximum number of scatter gather entries" 40 depends on FUSION_SPI || FUSION_FC 41 default "128" 42 help 43 This option allows you to specify the maximum number of scatter- 44 gather entries per I/O. The driver defaults to 40, a reasonable number 45 for most systems. However, the user may increase this up to 128. 46 Increasing this parameter will require significantly more memory 47 on a per controller instance. Increasing the parameter is not 48 necessary (or recommended) unless the user will be running 49 large I/O's via the raw interface. 50 51config FUSION_CTL 52 tristate "Fusion MPT misc device (ioctl) driver" 53 depends on FUSION_SPI || FUSION_FC 54 ---help--- 55 The Fusion MPT misc device driver provides specialized control 56 of MPT adapters via system ioctl calls. Use of ioctl calls to 57 the MPT driver requires that you create and use a misc device 58 node ala: 59 mknod /dev/mptctl c 10 240 60 61 One use of this ioctl interface is to perform an upgrade (reflash) 62 of the MPT adapter firmware. Refer to readme file(s) distributed 63 with the Fusion MPT linux driver for additional details. 64 65 If enabled by saying M to this, a driver named: mptctl 66 will be compiled. 67 68 If unsure whether you really want or need this, say N. 69 70config FUSION_LAN 71 tristate "Fusion MPT LAN driver" 72 depends on FUSION_FC && NET_FC 73 ---help--- 74 This module supports LAN IP traffic over Fibre Channel port(s) 75 on Fusion MPT compatible hardware (LSIFC9xx chips). 76 The physical interface used is defined in RFC 2625. 77 Please refer to that document for details. 78 79 Installing this driver requires the knowledge to configure and 80 activate a new network interface, "fc0", using standard Linux tools. 81 82 If enabled by saying M to this, a driver named: mptlan 83 will be compiled. 84 85 If unsure whether you really want or need this, say N. 86 87endmenu 88