1 2menu "Fusion MPT device support" 3 4config FUSION_SPI 5 tristate "Fusion MPT ScsiHost drivers for SPI" 6 depends on PCI && SCSI 7 ---help--- 8 SCSI HOST support for a parallel SCSI host adapters. 9 10 List of supported controllers: 11 12 LSI53C1020 13 LSI53C1020A 14 LSI53C1030 15 LSI53C1035 16 17config FUSION_FC 18 tristate "Fusion MPT ScsiHost drivers for FC" 19 depends on PCI && SCSI 20 ---help--- 21 SCSI HOST support for a Fiber Channel host adapters. 22 23 List of supported controllers: 24 25 LSIFC909 26 LSIFC919 27 LSIFC919X 28 LSIFC929 29 LSIFC929X 30 LSIFC929XL 31 32config FUSION_MAX_SGE 33 int "Maximum number of scatter gather entries" 34 depends on FUSION_SPI || FUSION_FC 35 default "128" 36 help 37 This option allows you to specify the maximum number of scatter- 38 gather entries per I/O. The driver defaults to 40, a reasonable number 39 for most systems. However, the user may increase this up to 128. 40 Increasing this parameter will require significantly more memory 41 on a per controller instance. Increasing the parameter is not 42 necessary (or recommended) unless the user will be running 43 large I/O's via the raw interface. 44 45config FUSION_CTL 46 tristate "Fusion MPT misc device (ioctl) driver" 47 depends on FUSION_SPI || FUSION_FC 48 ---help--- 49 The Fusion MPT misc device driver provides specialized control 50 of MPT adapters via system ioctl calls. Use of ioctl calls to 51 the MPT driver requires that you create and use a misc device 52 node ala: 53 mknod /dev/mptctl c 10 240 54 55 One use of this ioctl interface is to perform an upgrade (reflash) 56 of the MPT adapter firmware. Refer to readme file(s) distributed 57 with the Fusion MPT linux driver for additional details. 58 59 If enabled by saying M to this, a driver named: mptctl 60 will be compiled. 61 62 If unsure whether you really want or need this, say N. 63 64config FUSION_LAN 65 tristate "Fusion MPT LAN driver" 66 depends on FUSION_FC && NET_FC 67 ---help--- 68 This module supports LAN IP traffic over Fibre Channel port(s) 69 on Fusion MPT compatible hardware (LSIFC9xx chips). 70 The physical interface used is defined in RFC 2625. 71 Please refer to that document for details. 72 73 Installing this driver requires the knowledge to configure and 74 activate a new network interface, "fc0", using standard Linux tools. 75 76 If enabled by saying M to this, a driver named: mptlan 77 will be compiled. 78 79 If unsure whether you really want or need this, say N. 80 81endmenu 82