1 2menuconfig FUSION 3 bool "Fusion MPT device support" 4 depends on PCI 5 ---help--- 6 Say Y here to get to see options for Fusion Message 7 Passing Technology (MPT) drivers. 8 This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if FUSION 13 14config FUSION_SPI 15 tristate "Fusion MPT ScsiHost drivers for SPI" 16 depends on PCI && SCSI 17 select SCSI_SPI_ATTRS 18 ---help--- 19 SCSI HOST support for a parallel SCSI host adapters. 20 21 List of supported controllers: 22 23 LSI53C1020 24 LSI53C1020A 25 LSI53C1030 26 LSI53C1035 27 ATTO UL4D 28 29config FUSION_FC 30 tristate "Fusion MPT ScsiHost drivers for FC" 31 depends on PCI && SCSI 32 select SCSI_FC_ATTRS 33 ---help--- 34 SCSI HOST support for a Fiber Channel host adapters. 35 36 List of supported controllers: 37 38 LSIFC909 39 LSIFC919 40 LSIFC919X 41 LSIFC929 42 LSIFC929X 43 LSIFC929XL 44 Brocade FC 410/420 45 46config FUSION_SAS 47 tristate "Fusion MPT ScsiHost drivers for SAS" 48 depends on PCI && SCSI 49 select SCSI_SAS_ATTRS 50 ---help--- 51 SCSI HOST support for a SAS host adapters. 52 53 List of supported controllers: 54 55 LSISAS1064 56 LSISAS1068 57 LSISAS1064E 58 LSISAS1068E 59 60config FUSION_MAX_SGE 61 int "Maximum number of scatter gather entries (16 - 128)" 62 default "128" 63 range 16 128 64 help 65 This option allows you to specify the maximum number of scatter- 66 gather entries per I/O. The driver default is 128, which matches 67 SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16. 68 Decreasing this parameter will reduce memory requirements 69 on a per controller instance. 70 71config FUSION_CTL 72 tristate "Fusion MPT misc device (ioctl) driver" 73 depends on FUSION_SPI || FUSION_FC || FUSION_SAS 74 ---help--- 75 The Fusion MPT misc device driver provides specialized control 76 of MPT adapters via system ioctl calls. Use of ioctl calls to 77 the MPT driver requires that you create and use a misc device 78 node ala: 79 mknod /dev/mptctl c 10 240 80 81 One use of this ioctl interface is to perform an upgrade (reflash) 82 of the MPT adapter firmware. Refer to readme file(s) distributed 83 with the Fusion MPT linux driver for additional details. 84 85 If enabled by saying M to this, a driver named: mptctl 86 will be compiled. 87 88 If unsure whether you really want or need this, say N. 89 90config FUSION_LAN 91 tristate "Fusion MPT LAN driver" 92 depends on FUSION_FC && NET_FC 93 ---help--- 94 This module supports LAN IP traffic over Fibre Channel port(s) 95 on Fusion MPT compatible hardware (LSIFC9xx chips). 96 The physical interface used is defined in RFC 2625. 97 Please refer to that document for details. 98 99 Installing this driver requires the knowledge to configure and 100 activate a new network interface, "fc0", using standard Linux tools. 101 102 If enabled by saying M to this, a driver named: mptlan 103 will be compiled. 104 105 If unsure whether you really want or need this, say N. 106 107config FUSION_LOGGING 108 bool "Fusion MPT logging facility" 109 depends on FUSION 110 ---help--- 111 This turns on a logging facility that can be used to debug a number 112 of Fusion MPT related problems. 113 114 The debug level can be programmed on the fly via SysFS (hex values) 115 116 echo [level] > /sys/class/scsi_host/host#/debug_level 117 118 There are various debug levels that an be found in the source: 119 file:drivers/message/fusion/mptdebug.h 120 121endif # FUSION 122