net: add macro for VLAN header length

Multiple drivers are defining macros for VLAN header length, to remove
the redundancy defining macro in the ether header.
And updated drivers to use the new mac

net: add macro for VLAN header length

Multiple drivers are defining macros for VLAN header length, to remove
the redundancy defining macro in the ether header.
And updated drivers to use the new macro.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Jiawen Wu <[email protected]>

show more ...

net/mvpp2: fix configured state dependency

Need to set configure flag to allow create and commit mrvl tm
hierarchy tree. tm configuration depends on parameters that are
being set in port configure s

net/mvpp2: fix configured state dependency

Need to set configure flag to allow create and commit mrvl tm
hierarchy tree. tm configuration depends on parameters that are
being set in port configure stage, e.g. nb_tx_queues.
This also aligned with the tm api description.

Fixes: 429c394417 ("net/mvpp2: support traffic manager")
Cc: [email protected]

Signed-off-by: Dana Vardi <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: add fill buffs to configuration file

Extend config file with 'fill_bpool_buffs'
which control the amount of refill buffers

Signed-off-by: Dana Vardi <[email protected]>
Reviewed-by: Liro

net/mvpp2: add fill buffs to configuration file

Extend config file with 'fill_bpool_buffs'
which control the amount of refill buffers

Signed-off-by: Dana Vardi <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: support forwarding bad packets

Extend the config file with option to forward packets
that were marked as "l2 bad pkts".
By default the driver drop those packets

Signed-off-by: Dana Vardi

net/mvpp2: support forwarding bad packets

Extend the config file with option to forward packets
that were marked as "l2 bad pkts".
By default the driver drop those packets

Signed-off-by: Dana Vardi <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: apply flow control after port init

In case ppio was not initialized yet (only at 'start' function)
the flow-ctrl setting should be saved for later stage.

Signed-off-by: Liron Himi <liron

net/mvpp2: apply flow control after port init

In case ppio was not initialized yet (only at 'start' function)
the flow-ctrl setting should be saved for later stage.

Signed-off-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: expose max MTU

Expose max-MTU based on the max frame size that
l4 checksum generation can be done by HW.

Signed-off-by: Liron Himi <[email protected]>
Reviewed-by: Yuri Chipchev <yuric@

net/mvpp2: expose max MTU

Expose max-MTU based on the max frame size that
l4 checksum generation can be done by HW.

Signed-off-by: Liron Himi <[email protected]>
Reviewed-by: Yuri Chipchev <[email protected]>

show more ...

net/mvpp2: introduce fixup for FIFO overrun

Currently the HW is configured with only one pool which its
buffer size may be larger than the rx-fifo-size.
In that situation, frame size larger than the

net/mvpp2: introduce fixup for FIFO overrun

Currently the HW is configured with only one pool which its
buffer size may be larger than the rx-fifo-size.
In that situation, frame size larger than the fifo-size
is gets dropped due to fifo overrun.
This is cause because the HW works in cut-through mode which
waits to have in the fifo at least the amount of bytes as define
in the smallest pool's buffer size.

This patch add a dummy pool which its buffer size
is very small (smaller than 64B frame). This tricks the HW and
any frame size is gets passed from the FIFO to the PP2.

Signed-off-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: support raw flow pattern

Add support for RAW type and connect it to MUSDK UDF

Signed-off-by: Liron Himi <[email protected]>

net/mvpp2: move common functions to common location

Move common functions to common location

Signed-off-by: Liron Himi <[email protected]>

net/mvpp2: build flow table key along with rule

Currently the key is always built in network order
regardless of user input.
Besides the fact that it is not in user order,
it prevent future support

net/mvpp2: build flow table key along with rule

Currently the key is always built in network order
regardless of user input.
Besides the fact that it is not in user order,
it prevent future support for udf header between standard headers.
This patch builds the key while parsing the given rule.

Signed-off-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: remove VLAN flush

VLAN-flush in MUSDK is not supported yet.
Until it does, the code should be removed as currently
an redundant error message is displayed.

Fixes: a8f3d6783a3c ("net/mrvl

net/mvpp2: remove VLAN flush

VLAN-flush in MUSDK is not supported yet.
Until it does, the code should be removed as currently
an redundant error message is displayed.

Fixes: a8f3d6783a3c ("net/mrvl: support VLAN filtering")
Cc: [email protected]

Signed-off-by: Liron Himi <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net/mvpp2: support Tx scatter/gather

The patch introduces scatter/gather support on transmit path.
A separate Tx callback is added and set if the application
requests multisegment Tx offload. Multip

net/mvpp2: support Tx scatter/gather

The patch introduces scatter/gather support on transmit path.
A separate Tx callback is added and set if the application
requests multisegment Tx offload. Multiple descriptors are
sent per one packet.

Signed-off-by: Zyta Szpak <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Yelena Krivosheev <[email protected]>

show more ...

net/mvpp2: update MTU and MRU related calculations

This commit updates MTU and MRU related calculations.

Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Yelena Krivosheev <yelen

net/mvpp2: update MTU and MRU related calculations

This commit updates MTU and MRU related calculations.

Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Yelena Krivosheev <[email protected]>
Reviewed-by: Dmitri Epshtein <[email protected]>

show more ...

net/mvpp2: support traffic manager

Add traffic manager support.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Liron Himi <li

net/mvpp2: support traffic manager

Add traffic manager support.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: change default policer configuration

Change QoS configuration file syntax for port's default policer
setup.

Since default policer configuration is performed before
any other policer conf

net/mvpp2: change default policer configuration

Change QoS configuration file syntax for port's default policer
setup.

Since default policer configuration is performed before
any other policer configuration we can pick a default id.

This simplifies default policer configuration since user
no longer has to choose ids from range [0, PP2_CLS_PLCR_NUM].

Explicitly document values for rate_limit_enable field.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: support metering

Add support for configuring plcr via DPDK generic metering API.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>

net/mvpp2: support metering

Add support for configuring plcr via DPDK generic metering API.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: move common code

Cleanup sources by moving common code to the pmd
header file.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
R

net/mvpp2: move common code

Cleanup sources by moving common code to the pmd
header file.

Signed-off-by: Tomasz Duszynski <[email protected]>
Signed-off-by: Natalie Samsonov <[email protected]>
Reviewed-by: Liron Himi <[email protected]>

show more ...

net/mvpp2: convert to dynamic logging

Convert mvpp2 PMD to use dynamic logging.

Signed-off-by: Tomasz Duszynski <[email protected]>

net/mrvl: rename PMD as mvpp2

The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for ot

net/mrvl: rename PMD as mvpp2

The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.

This patch doesn't introduce any change except renaming.

Signed-off-by: Natalie Samsonov <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>

show more ...