| 92c66ee8 | 20-Mar-2025 |
Brett Creeley <[email protected]> |
pds_fwctl: add rpc and query support
The pds_fwctl driver doesn't know what RPC operations are available
in the firmware, so also doesn't know what scope they might have. The
userland utility suppl
pds_fwctl: add rpc and query support
The pds_fwctl driver doesn't know what RPC operations are available
in the firmware, so also doesn't know what scope they might have. The
userland utility supplies the firmware "endpoint" and "operation" id values
and this driver queries the firmware for endpoints and their available
operations. The operation descriptions include the scope information
which the driver uses for scope testing.
Link: https://patch.msgid.link/r/[email protected]
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
show more ...
|
| f232836a | 07-Aug-2023 |
Brett Creeley <[email protected]> |
vfio/pds: Add support for dirty page tracking
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_
vfio/pds: Add support for dirty page tracking
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Shameer Kolothum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
show more ...
|
| bb500dbe | 07-Aug-2023 |
Brett Creeley <[email protected]> |
vfio/pds: Add VFIO live migration support
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's admin
vfio/pds: Add VFIO live migration support
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Shameer Kolothum <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
show more ...
|
| a8492cd8 | 19-May-2023 |
Shannon Nelson <[email protected]> |
pds_vdpa: move enum from common to adminq header
The pds_core_logical_qtype enum and IFNAMSIZ are not needed
in the common PDS header, only needed when working with the
adminq, so move them to the a
pds_vdpa: move enum from common to adminq header
The pds_core_logical_qtype enum and IFNAMSIZ are not needed
in the common PDS header, only needed when working with the
adminq, so move them to the adminq header.
Note: This patch might conflict with pds_vfio patches that are
in review, depending on which patchset gets pulled first.
Signed-off-by: Shannon Nelson <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
show more ...
|
| d24c2827 | 19-Apr-2023 |
Shannon Nelson <[email protected]> |
pds_core: publish events to the clients
When the Core device gets an event from the device, or notices
the device FW to be up or down, it needs to send those events
on to the clients that have an ev
pds_core: publish events to the clients
When the Core device gets an event from the device, or notices
the device FW to be up or down, it needs to send those events
on to the clients that have an event handler. Add the code to
pass along the events to the clients.
The entry points pdsc_register_notify() and pdsc_unregister_notify()
are EXPORTed for other drivers that want to listen for these events.
Signed-off-by: Shannon Nelson <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| 10659034 | 19-Apr-2023 |
Shannon Nelson <[email protected]> |
pds_core: add the aux client API
Add the client API operations for running adminq commands.
The core registers the client with the FW, then the client
has a context for requesting adminq services.
pds_core: add the aux client API
Add the client API operations for running adminq commands.
The core registers the client with the FW, then the client
has a context for requesting adminq services. We expect
to add additional operations for other clients, including
requesting additional private adminqs and IRQs, but don't have
the need yet.
Signed-off-by: Shannon Nelson <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| 65e0185a | 19-Apr-2023 |
Shannon Nelson <[email protected]> |
pds_core: set up the VIF definitions and defaults
The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in d
pds_core: set up the VIF definitions and defaults
The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in debugfs. At this point
only vDPA is supported in this driver so we only setup
devices for that feature.
Signed-off-by: Shannon Nelson <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|