perf/marvell: Marvell PEM performance monitor support

PCI Express Interface PMU includes various performance counters
to monitor the data that is transmitted over the PCIe link. The
counters track v

perf/marvell: Marvell PEM performance monitor support

PCI Express Interface PMU includes various performance counters
to monitor the data that is transmitted over the PCIe link. The
counters track various inbound and outbound transactions which
includes separate counters for posted/non-posted/completion TLPs.
Also, inbound and outbound memory read requests along with their
latencies can also be monitored. Address Translation Services(ATS)events
such as ATS Translation, ATS Page Request, ATS Invalidation along with
their corresponding latencies are also supported.

The performance counters are 64 bits wide.

For instance,
perf stat -e ib_tlp_pr <workload>
tracks the inbound posted TLPs for the workload.

Co-developed-by: Linu Cherian <[email protected]>
Signed-off-by: Linu Cherian <[email protected]>
Signed-off-by: Gowthami Thiagarajan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: Add driver for Arm NI-700 interconnect PMU

The Arm NI-700 Network-on-Chip Interconnect has a relatively
straightforward design with a hierarchy of voltage, power, and clock
domains, where each

perf: Add driver for Arm NI-700 interconnect PMU

The Arm NI-700 Network-on-Chip Interconnect has a relatively
straightforward design with a hierarchy of voltage, power, and clock
domains, where each clock domain then contains a number of interface
units and a PMU which can monitor events thereon. As such, it begets a
relatively straightforward driver to interface those PMUs with perf.

Even more so than with arm-cmn, users will require detailed knowledge of
the wider system topology in order to meaningfully analyse anything,
since the interconnect itself cannot know what lies beyond the boundary
of each inscrutably-numbered interface. Given that, for now they are
also expected to refer to the NI-700 documentation for the relevant
event IDs to provide as well. An identifier is implemented so we can
come back and add jevents if anyone really wants to.

Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/9933058d0ab8138c78a61cd6852ea5d5ff48e393.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf/arm: Move 32-bit PMU drivers to drivers/perf/

It is preferred to put drivers under drivers/ rather than under arch/.
The PMU drivers also depend on arm_pmu.c, so it's better to place them
all t

perf/arm: Move 32-bit PMU drivers to drivers/perf/

It is preferred to put drivers under drivers/ rather than under arch/.
The PMU drivers also depend on arm_pmu.c, so it's better to place them
all together.

Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: starfive: fix 64-bit only COMPILE_TEST condition

ARCH_STARFIVE is not restricted to 64-bit platforms, so while Will's
addition of a 64-bit only condition satisfied the build robots doing
COMPI

perf: starfive: fix 64-bit only COMPILE_TEST condition

ARCH_STARFIVE is not restricted to 64-bit platforms, so while Will's
addition of a 64-bit only condition satisfied the build robots doing
COMPILE_TEST builds, Palmer ran into the same problems with writeq()
being undefined during regular rv32 builds.

Promote the dependency on 64-bit to its own `depends on` so that the
driver can never be included in 32-bit builds.

Reported-by: Palmer Dabbelt <[email protected]>
Fixes: c2b24812f7bc ("perf: starfive: Add StarLink PMU support")
Fixes: f0dbc6d0de38 ("perf: starfive: Only allow COMPILE_TEST for 64-bit architectures")
Signed-off-by: Conor Dooley <[email protected]>
Acked-by: Will Deacon <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Acked-by: Ji Sheng Teoh <[email protected]>
Acked-by: Emil Renner Berthing <[email protected]>
Link: https://lore.kernel.org/r/20240318-emphatic-rally-f177a4fe1bdc@spud
Signed-off-by: Catalin Marinas <[email protected]>

show more ...

perf: RISC-V: Introduce Andes PMU to support perf event sampling

Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW(

perf: RISC-V: Introduce Andes PMU to support perf event sampling

Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.

To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.

Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Charles Ci-Jyun Wu <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Co-developed-by: Locus Wei-Han Chen <[email protected]>
Signed-off-by: Locus Wei-Han Chen <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Tested-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

perf: starfive: Only allow COMPILE_TEST for 64-bit architectures

The kbuild robot exploded while wasting its time building the Starfive
PMU driver for the 32-bit PA-RISC and Hexagon architectures.

perf: starfive: Only allow COMPILE_TEST for 64-bit architectures

The kbuild robot exploded while wasting its time building the Starfive
PMU driver for the 32-bit PA-RISC and Hexagon architectures.

Adjust the Kconfig dependencies so that COMPILE_TEST is only applicable
for 64-bit architectures (which implement writeq()).

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: starfive: Add StarLink PMU support

This patch adds support for StarFive's StarLink PMU (Performance
Monitor Unit). StarLink PMU integrates one or more CPU cores with
a shared L3 memory system.

perf: starfive: Add StarLink PMU support

This patch adds support for StarFive's StarLink PMU (Performance
Monitor Unit). StarLink PMU integrates one or more CPU cores with
a shared L3 memory system. The PMU supports overflow interrupt,
up to 16 programmable 64bit event counters, and an independent
64bit cycle counter. StarLink PMU is accessed via MMIO.

Example Perf stat output:
[root@user]# perf stat -a -e /starfive_starlink_pmu/cycles/ \
-e /starfive_starlink_pmu/read_miss/ \
-e /starfive_starlink_pmu/read_hit/ \
-e /starfive_starlink_pmu/release_request/ \
-e /starfive_starlink_pmu/write_hit/ \
-e /starfive_starlink_pmu/write_miss/ \
-e /starfive_starlink_pmu/write_request/ \
-e /starfive_starlink_pmu/writeback/ \
-e /starfive_starlink_pmu/read_request/ \
-- openssl speed rsa2048
Doing 2048 bits private rsa's for 10s: 5 2048 bits private RSA's in
2.84s
Doing 2048 bits public rsa's for 10s: 169 2048 bits public RSA's in
2.42s
version: 3.0.11
built on: Tue Sep 19 13:02:31 2023 UTC
options: bn(64,64)
CPUINFO: N/A
sign verify sign/s verify/s
rsa 2048 bits 0.568000s 0.014320s 1.8 69.8
/////////
Performance counter stats for 'system wide':

649991998 starfive_starlink_pmu/cycles/
1009690 starfive_starlink_pmu/read_miss/
1079750 starfive_starlink_pmu/read_hit/
2089405 starfive_starlink_pmu/release_request/
129 starfive_starlink_pmu/write_hit/
70 starfive_starlink_pmu/write_miss/
194 starfive_starlink_pmu/write_request/
150080 starfive_starlink_pmu/writeback/
2089423 starfive_starlink_pmu/read_request/

27.062755678 seconds time elapsed

Signed-off-by: Ji Sheng Teoh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

drivers/perf: add DesignWare PCIe PMU driver

This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core c

drivers/perf: add DesignWare PCIe PMU driver

This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).

To facilitate collection of statistics the controller provides the
following two features for each Root Port:

- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)

Note: There is no interrupt for counter overflow.

This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,

30:03.0 PCI bridge: Device 1ded:8000 (rev 01)

the PMU device name for this Root Port is dwc_rootport_3018.

Example usage of counting PCIe RX TLP data payload (Units of bytes)::

$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/

average RX bandwidth can be calculated like this:

PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window

Signed-off-by: Shuai Xue <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Reviewed-and-tested-by: Ilkka Koskinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf/smmuv3: Remove build dependency on ACPI

This driver supports working without ACPI since commit 3f7be43561766
("perf/smmuv3: Add devicetree support"), so remove the build dependency.

Signed-off

perf/smmuv3: Remove build dependency on ACPI

This driver supports working without ACPI since commit 3f7be43561766
("perf/smmuv3: Add devicetree support"), so remove the build dependency.

Signed-off-by: Vincent Whitchurch <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: CXL Performance Monitoring Unit driver

CXL rev 3.0 introduces a standard performance monitoring hardware
block to CXL. Instances are discovered using CXL Register Locator DVSEC
entries. Each C

perf: CXL Performance Monitoring Unit driver

CXL rev 3.0 introduces a standard performance monitoring hardware
block to CXL. Instances are discovered using CXL Register Locator DVSEC
entries. Each CXL component may have multiple PMUs.

This initial driver supports a subset of types of counter.
It supports counters that are either fixed or configurable, but requires
that they support the ability to freeze and write value whilst frozen.

Development done with QEMU model which will be posted shortly.

Example:

$ perf stat -a -e cxl_pmu_mem0.0/h2d_req_snpcur/ -e cxl_pmu_mem0.0/h2d_req_snpdata/ -e cxl_pmu_mem0.0/clock_ticks/ sleep 1

Performance counter stats for 'system wide':

96,757,023,244,321 cxl_pmu_mem0.0/h2d_req_snpcur/
96,757,023,244,365 cxl_pmu_mem0.0/h2d_req_snpdata/
193,514,046,488,653 cxl_pmu_mem0.0/clock_ticks/

1.090539600 seconds time elapsed

Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>

show more ...

drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver

Add ddr performance monitor support for i.MX93.

There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counte

drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver

Add ddr performance monitor support for i.MX93.

There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counter that counts only clock cycles.
- Counter 1-10 are 32-bit counters that can monitor counter-specific
events in addition to counting reference events.

For example:
perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls

Besides, this ddr pmu support AXI filter capability. It's implemented as
counter-specific events. It now supports read transaction, write transaction
and read beat events which corresponding respecitively to counter 2, 3 and 4.
axi_mask and axi_id need to be as event parameters.

For example:
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/

Signed-off-by: Xu Yang <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[will: Remove redundant error message on platform_get_irq() failure]
Signed-off-by: Will Deacon <[email protected]>

show more ...

ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM

The only thing stopping the PMUv3 driver from compiling on 32bit
is the lack of defined system registers names and the handful of
required h

ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM

The only thing stopping the PMUv3 driver from compiling on 32bit
is the lack of defined system registers names and the handful of
required helpers.

This is easily solved by providing the sysreg accessors and updating
the Kconfig entry.

Signed-off-by: Marc Zyngier <[email protected]>
Co-developed-by: Zaid Al-Bassam <[email protected]>
Signed-off-by: Zaid Al-Bassam <[email protected]>
Tested-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

arm64: perf: Move PMUv3 driver to drivers/perf

Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as

arm64: perf: Move PMUv3 driver to drivers/perf

Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as 32bit KVM guests.

This patch moves it into drivers/perf/arm_pmuv3.c, with an include
file in include/linux/perf/arm_pmuv3.h. The only thing left in
arch/arm64 is some mundane perf stuff.

Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Zaid Al-Bassam <[email protected]>
Tested-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver

Add support for Amlogic Meson G12 Series SOC - DDR bandwidth PMU driver
framework and interfaces. The PMU can not only monitor the

perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver

Add support for Amlogic Meson G12 Series SOC - DDR bandwidth PMU driver
framework and interfaces. The PMU can not only monitor the total DDR
bandwidth, but also individual IP module bandwidth.

Signed-off-by: Jiucheng Xu <[email protected]>
Tested-by: Chris Healy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN

Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.

Signed-off-by: Th

genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN

Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

perf: arm_cspmu: Add support for ARM CoreSight PMU driver

Add support for ARM CoreSight PMU driver framework and interfaces.
The driver provides generic implementation to operate uncore PMU based
on

perf: arm_cspmu: Add support for ARM CoreSight PMU driver

Add support for ARM CoreSight PMU driver framework and interfaces.
The driver provides generic implementation to operate uncore PMU based
on ARM CoreSight PMU architecture. The driver also provides interface
to get vendor/implementation specific information, for example event
attributes and formating.

The specification used in this implementation can be found below:
* ACPI Arm Performance Monitoring Unit table:
https://developer.arm.com/documentation/den0117/latest
* ARM Coresight PMU architecture:
https://developer.arm.com/documentation/ihi0091/latest

Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Besar Wicaksono <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI

The Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver relies
solely on ACPI for matching. Hence add a dependency on ACPI, to pr

drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI

The Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver relies
solely on ACPI for matching. Hence add a dependency on ACPI, to prevent
asking the user about this driver when configuring a kernel without ACPI
support.

Fixes: cf7b61073e45 ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/2a4407bb598285660fa5e604e56823ddb12bb0aa.1664285774.git.geert+renesas@glider.be
Signed-off-by: Catalin Marinas <[email protected]>

show more ...

drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC

Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver
support for Alibaba T-Head Yitian 710 SoC chip. Yitia

drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC

Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver
support for Alibaba T-Head Yitian 710 SoC chip. Yitian supports DDR5/4
DRAM and targets cloud computing and HPC.

Each PMU is registered as a device in /sys/bus/event_source/devices, and
users can select event to monitor in each sub-channel, independently. For
example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two
sub-channels of the same channel in die 0. And the PMU device of die 1 is
prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000.

Due to hardware limitation, one of DDRSS Driveway PMU overflow interrupt
shares the same irq number with MPAM ERR_IRQ. To register DDRSS PMU and
MPAM drivers successfully, add IRQF_SHARED flag.

Signed-off-by: Shuai Xue <[email protected]>
Co-developed-by: Hongbo Yao <[email protected]>
Signed-off-by: Hongbo Yao <[email protected]>
Co-developed-by: Neng Chen <[email protected]>
Signed-off-by: Neng Chen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER

The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only
present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER,
t

perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER

The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only
present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER,
to prevent asking the user about this driver when configuring a kernel
without Cavium Thunder (incl. Marvell CN10K) SoC support,

Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be
Signed-off-by: Will Deacon <[email protected]>

show more ...

RISC-V: Add perf platform driver based on SBI PMU extension

RISC-V SBI specification added a PMU extension that allows to configure
start/stop any pmu counter. The RISC-V perf can use most of the ge

RISC-V: Add perf platform driver based on SBI PMU extension

RISC-V SBI specification added a PMU extension that allows to configure
start/stop any pmu counter. The RISC-V perf can use most of the generic
perf features except interrupt overflow and event filtering based on
privilege mode which will be added in future.

It also allows to monitor a handful of firmware counters that can provide
insights into firmware activity during a performance analysis.

Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

RISC-V: Add a simple platform driver for RISC-V legacy perf

The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a

RISC-V: Add a simple platform driver for RISC-V legacy perf

The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.

Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

RISC-V: Add a perf core library for pmu drivers

Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in fu

RISC-V: Add a perf core library for pmu drivers

Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in future. Currently, both SBI based perf driver and legacy driver
implemented uses the library. Most of the common perf functionalities
are kept in this core library wile PMU specific driver can implement PMU
specific features. For example, the SBI specific functionality will be
implemented in the SBI specific driver.

Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

drivers/perf: Add Apple icestorm/firestorm CPU PMU driver

Add a new, weird and wonderful driver for the equally weird Apple
PMU HW. Although the PMU itself is functional, we don't know much
about th

drivers/perf: Add Apple icestorm/firestorm CPU PMU driver

Add a new, weird and wonderful driver for the equally weird Apple
PMU HW. Although the PMU itself is functional, we don't know much
about the events yet, so this can be considered as yet another
random number generator...

Nonetheless, it can reliably count at least cycles and instructions
in the usually wonky big-little way. For anything else, it of course
supports raw event numbers.

Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf/marvell: cn10k DDR perf event core ownership

As DDR perf event counters are not per core, so they should be accessed
only by one core at a time. Select new core when previously owning core
is g

perf/marvell: cn10k DDR perf event core ownership

As DDR perf event counters are not per core, so they should be accessed
only by one core at a time. Select new core when previously owning core
is going offline.

Signed-off-by: Bharat Bhushan <[email protected]>
Reviewed-by: Bhaskara Budiredla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

show more ...

perf: MARVELL_CN10K_TAD_PMU should depend on ARCH_THUNDER

The Marvell CN10K Last-Level cache Tag-and-data Units (LLC-TAD)
performance monitor is only present on Marvell CN10K SoCs. Hence add a
depe

perf: MARVELL_CN10K_TAD_PMU should depend on ARCH_THUNDER

The Marvell CN10K Last-Level cache Tag-and-data Units (LLC-TAD)
performance monitor is only present on Marvell CN10K SoCs. Hence add a
dependency on ARCH_THUNDER, to prevent asking the user about this driver
when configuring a kernel without Cavium Thunder (incl. Marvell CN10K)
SoC support.

Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/b4662a2c767d04cca19417e0c845edea2da262ad.1641995941.git.geert+renesas@glider.be
Signed-off-by: Will Deacon <[email protected]>

show more ...