eventdev/eth_rx: simplify event vector config

Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue pa

eventdev/eth_rx: simplify event vector config

Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue parameters.
This simplifies event vector configuration as it avoids splitting
configuration per Rx queue.

Signed-off-by: Pavan Nikhilesh <[email protected]>
Acked-by: Jay Jayatheerthan <[email protected]>
Acked-by: Ray Kinsella <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

eventdev/crypto: add cryptodev start in adapter spec

Event crypto adapter spec does not mention about cryptodev start and
stop. Cryptodev attached to the adapter should be started before calling
cry

eventdev/crypto: add cryptodev start in adapter spec

Event crypto adapter spec does not mention about cryptodev start and
stop. Cryptodev attached to the adapter should be started before calling
crypto adapter start. Added the same in spec and test application.

Signed-off-by: Shijith Thotton <[email protected]>
Acked-by: Akhil Goyal <[email protected]>

show more ...

eventdev/eth_rx: make enqueue buffer circular

Rx adapter uses memove() to move unprocessed events to the beginning of
the packet enqueue buffer. The use memmove() was found to consume good
amount of

eventdev/eth_rx: make enqueue buffer circular

Rx adapter uses memove() to move unprocessed events to the beginning of
the packet enqueue buffer. The use memmove() was found to consume good
amount of CPU cycles (about 20%).

This patch removes the use of memove() while implementing a circular
buffer to avoid copying of data. With this change RX adapter is able
to fill the buffer of 16384 events.

Signed-off-by: Ganapati Kundapura <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

ethdev: hide internal structures

Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.

ethdev: hide internal structures

Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.

Signed-off-by: Konstantin Ananyev <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>
Tested-by: Feifei Wang <[email protected]>

show more ...

doc: remove event crypto metadata deprecation note

Proposed change to event crypto metadata is not done as per deprecation
note. Instead, comments are updated in spec to improve readability.

Signed

doc: remove event crypto metadata deprecation note

Proposed change to event crypto metadata is not done as per deprecation
note. Instead, comments are updated in spec to improve readability.

Signed-off-by: Shijith Thotton <[email protected]>
Acked-by: Abhinandan Gujjar <[email protected]>

show more ...

lib: remove C++ include guard from private headers

The private headers are compiled internally with a C compiler.
Thus extern "C" declaration is useless in such files.

Signed-off-by: Thomas Monjalo

lib: remove C++ include guard from private headers

The private headers are compiled internally with a C compiler.
Thus extern "C" declaration is useless in such files.

Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

cryptodev: expose driver interface as internal

The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.

Signed-off-by: Akhil Goyal <gakhil@ma

cryptodev: expose driver interface as internal

The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.

Signed-off-by: Akhil Goyal <[email protected]>
Acked-by: Matan Azrad <[email protected]>
Acked-by: Fan Zhang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

cryptodev: rename function to check device validity

The API rte_cryptodev_pmd_is_valid_dev, can be used
by the application as well as PMD to check whether
the device is valid or not. Hence, _pmd is

cryptodev: rename function to check device validity

The API rte_cryptodev_pmd_is_valid_dev, can be used
by the application as well as PMD to check whether
the device is valid or not. Hence, _pmd is removed
from the API.
The applications and drivers which use this API are
also updated.

Signed-off-by: Akhil Goyal <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

version: 21.11-rc0

Start a new release cycle with empty release notes.

The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and C

version: 21.11-rc0

Start a new release cycle with empty release notes.

The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.

Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>
Acked-by: David Marchand <[email protected]>

show more ...

eventdev: fix event port setup in Tx adapter

The event port config set by application in
rte_event_eth_tx_adapter_create API is modified in
default configuration callback function. This patch remove

eventdev: fix event port setup in Tx adapter

The event port config set by application in
rte_event_eth_tx_adapter_create API is modified in
default configuration callback function. This patch removes
this hardcode to use application provided event port
config value.

Fixes: a3bbf2e09756 ("eventdev: add eth Tx adapter implementation")
Cc: [email protected]

Signed-off-by: Naga Harish K S V <[email protected]>

show more ...

log: register with standardized names

Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.

Introduce two new

log: register with standardized names

Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.

Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,

RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.

There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.

Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5

$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done

$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done

Signed-off-by: David Marchand <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Bruce Richardson <[email protected]>

show more ...

eventdev: fix memory leakage on thread creation failure

This patch fixes the issue that epoll_events memory is not released
after the intr thread created fail.

Fixes: 3810ae435783 ("eventdev: add i

eventdev: fix memory leakage on thread creation failure

This patch fixes the issue that epoll_events memory is not released
after the intr thread created fail.

Fixes: 3810ae435783 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: [email protected]

Signed-off-by: Chengwen Feng <[email protected]>
Signed-off-by: Min Hu (Connor) <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

eventdev: remove redundant thread name setting

The thread name already set by rte_ctrl_thread_create() API, so remove
the call of rte_thread_setname() API.

Fixes: 3810ae435783 ("eventdev: add inter

eventdev: remove redundant thread name setting

The thread name already set by rte_ctrl_thread_create() API, so remove
the call of rte_thread_setname() API.

Fixes: 3810ae435783 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: [email protected]

Signed-off-by: Chengwen Feng <[email protected]>
Signed-off-by: Min Hu (Connor) <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...