xref: /dpdk/drivers/net/hns3/hns3_ethdev_vf.c (revision 0bac9fc7)
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2018-2021 HiSilicon Limited.
3  */
4 
5 #include <linux/pci_regs.h>
6 #include <rte_alarm.h>
7 #include <ethdev_pci.h>
8 #include <rte_io.h>
9 #include <rte_pci.h>
10 #include <rte_vfio.h>
11 
12 #include "hns3_ethdev.h"
13 #include "hns3_logs.h"
14 #include "hns3_rxtx.h"
15 #include "hns3_regs.h"
16 #include "hns3_intr.h"
17 #include "hns3_dcb.h"
18 #include "hns3_mp.h"
19 
20 #define HNS3VF_KEEP_ALIVE_INTERVAL	2000000 /* us */
21 #define HNS3VF_SERVICE_INTERVAL		1000000 /* us */
22 
23 #define HNS3VF_RESET_WAIT_MS	20
24 #define HNS3VF_RESET_WAIT_CNT	2000
25 
26 /* Reset related Registers */
27 #define HNS3_GLOBAL_RESET_BIT		0
28 #define HNS3_CORE_RESET_BIT		1
29 #define HNS3_IMP_RESET_BIT		2
30 #define HNS3_FUN_RST_ING_B		0
31 
32 enum hns3vf_evt_cause {
33 	HNS3VF_VECTOR0_EVENT_RST,
34 	HNS3VF_VECTOR0_EVENT_MBX,
35 	HNS3VF_VECTOR0_EVENT_OTHER,
36 };
37 
38 static enum hns3_reset_level hns3vf_get_reset_level(struct hns3_hw *hw,
39 						    uint64_t *levels);
40 static int hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
41 static int hns3vf_dev_configure_vlan(struct rte_eth_dev *dev);
42 
43 static int hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
44 				  struct rte_ether_addr *mac_addr);
45 static int hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
46 				     struct rte_ether_addr *mac_addr);
47 static int hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
48 				   __rte_unused int wait_to_complete);
49 
50 /* set PCI bus mastering */
51 static int
52 hns3vf_set_bus_master(const struct rte_pci_device *device, bool op)
53 {
54 	uint16_t reg;
55 	int ret;
56 
57 	ret = rte_pci_read_config(device, &reg, sizeof(reg), PCI_COMMAND);
58 	if (ret < 0) {
59 		PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
60 			     PCI_COMMAND);
61 		return ret;
62 	}
63 
64 	if (op)
65 		/* set the master bit */
66 		reg |= PCI_COMMAND_MASTER;
67 	else
68 		reg &= ~(PCI_COMMAND_MASTER);
69 
70 	return rte_pci_write_config(device, &reg, sizeof(reg), PCI_COMMAND);
71 }
72 
73 /**
74  * hns3vf_find_pci_capability - lookup a capability in the PCI capability list
75  * @cap: the capability
76  *
77  * Return the address of the given capability within the PCI capability list.
78  */
79 static int
80 hns3vf_find_pci_capability(const struct rte_pci_device *device, int cap)
81 {
82 #define MAX_PCIE_CAPABILITY 48
83 	uint16_t status;
84 	uint8_t pos;
85 	uint8_t id;
86 	int ttl;
87 	int ret;
88 
89 	ret = rte_pci_read_config(device, &status, sizeof(status), PCI_STATUS);
90 	if (ret < 0) {
91 		PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x", PCI_STATUS);
92 		return 0;
93 	}
94 
95 	if (!(status & PCI_STATUS_CAP_LIST))
96 		return 0;
97 
98 	ttl = MAX_PCIE_CAPABILITY;
99 	ret = rte_pci_read_config(device, &pos, sizeof(pos),
100 				  PCI_CAPABILITY_LIST);
101 	if (ret < 0) {
102 		PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
103 			     PCI_CAPABILITY_LIST);
104 		return 0;
105 	}
106 
107 	while (ttl-- && pos >= PCI_STD_HEADER_SIZEOF) {
108 		ret = rte_pci_read_config(device, &id, sizeof(id),
109 					  (pos + PCI_CAP_LIST_ID));
110 		if (ret < 0) {
111 			PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
112 				     (pos + PCI_CAP_LIST_ID));
113 			break;
114 		}
115 
116 		if (id == 0xFF)
117 			break;
118 
119 		if (id == cap)
120 			return (int)pos;
121 
122 		ret = rte_pci_read_config(device, &pos, sizeof(pos),
123 					  (pos + PCI_CAP_LIST_NEXT));
124 		if (ret < 0) {
125 			PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
126 				     (pos + PCI_CAP_LIST_NEXT));
127 			break;
128 		}
129 	}
130 	return 0;
131 }
132 
133 static int
134 hns3vf_enable_msix(const struct rte_pci_device *device, bool op)
135 {
136 	uint16_t control;
137 	int pos;
138 	int ret;
139 
140 	pos = hns3vf_find_pci_capability(device, PCI_CAP_ID_MSIX);
141 	if (pos) {
142 		ret = rte_pci_read_config(device, &control, sizeof(control),
143 				    (pos + PCI_MSIX_FLAGS));
144 		if (ret < 0) {
145 			PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
146 				     (pos + PCI_MSIX_FLAGS));
147 			return -ENXIO;
148 		}
149 
150 		if (op)
151 			control |= PCI_MSIX_FLAGS_ENABLE;
152 		else
153 			control &= ~PCI_MSIX_FLAGS_ENABLE;
154 		ret = rte_pci_write_config(device, &control, sizeof(control),
155 					  (pos + PCI_MSIX_FLAGS));
156 		if (ret < 0) {
157 			PMD_INIT_LOG(ERR, "failed to write PCI offset 0x%x",
158 				    (pos + PCI_MSIX_FLAGS));
159 		}
160 		return 0;
161 	}
162 	return -ENXIO;
163 }
164 
165 static int
166 hns3vf_add_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
167 {
168 	/* mac address was checked by upper level interface */
169 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
170 	int ret;
171 
172 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
173 				HNS3_MBX_MAC_VLAN_UC_ADD, mac_addr->addr_bytes,
174 				RTE_ETHER_ADDR_LEN, false, NULL, 0);
175 	if (ret) {
176 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
177 				      mac_addr);
178 		hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
179 			 mac_str, ret);
180 	}
181 	return ret;
182 }
183 
184 static int
185 hns3vf_remove_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
186 {
187 	/* mac address was checked by upper level interface */
188 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
189 	int ret;
190 
191 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
192 				HNS3_MBX_MAC_VLAN_UC_REMOVE,
193 				mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN,
194 				false, NULL, 0);
195 	if (ret) {
196 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
197 				      mac_addr);
198 		hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
199 			 mac_str, ret);
200 	}
201 	return ret;
202 }
203 
204 static int
205 hns3vf_add_mc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
206 {
207 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
208 	struct rte_ether_addr *addr;
209 	int ret;
210 	int i;
211 
212 	for (i = 0; i < hw->mc_addrs_num; i++) {
213 		addr = &hw->mc_addrs[i];
214 		/* Check if there are duplicate addresses */
215 		if (rte_is_same_ether_addr(addr, mac_addr)) {
216 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
217 					      addr);
218 			hns3_err(hw, "failed to add mc mac addr, same addrs"
219 				 "(%s) is added by the set_mc_mac_addr_list "
220 				 "API", mac_str);
221 			return -EINVAL;
222 		}
223 	}
224 
225 	ret = hns3vf_add_mc_mac_addr(hw, mac_addr);
226 	if (ret) {
227 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
228 				      mac_addr);
229 		hns3_err(hw, "failed to add mc mac addr(%s), ret = %d",
230 			 mac_str, ret);
231 	}
232 	return ret;
233 }
234 
235 static int
236 hns3vf_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
237 		    __rte_unused uint32_t idx,
238 		    __rte_unused uint32_t pool)
239 {
240 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
241 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
242 	int ret;
243 
244 	rte_spinlock_lock(&hw->lock);
245 
246 	/*
247 	 * In hns3 network engine adding UC and MC mac address with different
248 	 * commands with firmware. We need to determine whether the input
249 	 * address is a UC or a MC address to call different commands.
250 	 * By the way, it is recommended calling the API function named
251 	 * rte_eth_dev_set_mc_addr_list to set the MC mac address, because
252 	 * using the rte_eth_dev_mac_addr_add API function to set MC mac address
253 	 * may affect the specifications of UC mac addresses.
254 	 */
255 	if (rte_is_multicast_ether_addr(mac_addr))
256 		ret = hns3vf_add_mc_addr_common(hw, mac_addr);
257 	else
258 		ret = hns3vf_add_uc_mac_addr(hw, mac_addr);
259 
260 	rte_spinlock_unlock(&hw->lock);
261 	if (ret) {
262 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
263 				      mac_addr);
264 		hns3_err(hw, "failed to add mac addr(%s), ret = %d", mac_str,
265 			 ret);
266 	}
267 
268 	return ret;
269 }
270 
271 static void
272 hns3vf_remove_mac_addr(struct rte_eth_dev *dev, uint32_t idx)
273 {
274 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
275 	/* index will be checked by upper level rte interface */
276 	struct rte_ether_addr *mac_addr = &dev->data->mac_addrs[idx];
277 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
278 	int ret;
279 
280 	rte_spinlock_lock(&hw->lock);
281 
282 	if (rte_is_multicast_ether_addr(mac_addr))
283 		ret = hns3vf_remove_mc_mac_addr(hw, mac_addr);
284 	else
285 		ret = hns3vf_remove_uc_mac_addr(hw, mac_addr);
286 
287 	rte_spinlock_unlock(&hw->lock);
288 	if (ret) {
289 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
290 				      mac_addr);
291 		hns3_err(hw, "failed to remove mac addr(%s), ret = %d",
292 			 mac_str, ret);
293 	}
294 }
295 
296 static int
297 hns3vf_set_default_mac_addr(struct rte_eth_dev *dev,
298 			    struct rte_ether_addr *mac_addr)
299 {
300 #define HNS3_TWO_ETHER_ADDR_LEN (RTE_ETHER_ADDR_LEN * 2)
301 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
302 	struct rte_ether_addr *old_addr;
303 	uint8_t addr_bytes[HNS3_TWO_ETHER_ADDR_LEN]; /* for 2 MAC addresses */
304 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
305 	int ret;
306 
307 	/*
308 	 * It has been guaranteed that input parameter named mac_addr is valid
309 	 * address in the rte layer of DPDK framework.
310 	 */
311 	old_addr = (struct rte_ether_addr *)hw->mac.mac_addr;
312 	rte_spinlock_lock(&hw->lock);
313 	memcpy(addr_bytes, mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN);
314 	memcpy(&addr_bytes[RTE_ETHER_ADDR_LEN], old_addr->addr_bytes,
315 	       RTE_ETHER_ADDR_LEN);
316 
317 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
318 				HNS3_MBX_MAC_VLAN_UC_MODIFY, addr_bytes,
319 				HNS3_TWO_ETHER_ADDR_LEN, true, NULL, 0);
320 	if (ret) {
321 		/*
322 		 * The hns3 VF PMD driver depends on the hns3 PF kernel ethdev
323 		 * driver. When user has configured a MAC address for VF device
324 		 * by "ip link set ..." command based on the PF device, the hns3
325 		 * PF kernel ethdev driver does not allow VF driver to request
326 		 * reconfiguring a different default MAC address, and return
327 		 * -EPREM to VF driver through mailbox.
328 		 */
329 		if (ret == -EPERM) {
330 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
331 					      old_addr);
332 			hns3_warn(hw, "Has permanet mac addr(%s) for vf",
333 				  mac_str);
334 		} else {
335 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
336 					      mac_addr);
337 			hns3_err(hw, "Failed to set mac addr(%s) for vf: %d",
338 				 mac_str, ret);
339 		}
340 	}
341 
342 	rte_ether_addr_copy(mac_addr,
343 			    (struct rte_ether_addr *)hw->mac.mac_addr);
344 	rte_spinlock_unlock(&hw->lock);
345 
346 	return ret;
347 }
348 
349 static int
350 hns3vf_configure_mac_addr(struct hns3_adapter *hns, bool del)
351 {
352 	struct hns3_hw *hw = &hns->hw;
353 	struct rte_ether_addr *addr;
354 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
355 	int err = 0;
356 	int ret;
357 	int i;
358 
359 	for (i = 0; i < HNS3_VF_UC_MACADDR_NUM; i++) {
360 		addr = &hw->data->mac_addrs[i];
361 		if (rte_is_zero_ether_addr(addr))
362 			continue;
363 		if (rte_is_multicast_ether_addr(addr))
364 			ret = del ? hns3vf_remove_mc_mac_addr(hw, addr) :
365 			      hns3vf_add_mc_mac_addr(hw, addr);
366 		else
367 			ret = del ? hns3vf_remove_uc_mac_addr(hw, addr) :
368 			      hns3vf_add_uc_mac_addr(hw, addr);
369 
370 		if (ret) {
371 			err = ret;
372 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
373 					      addr);
374 			hns3_err(hw, "failed to %s mac addr(%s) index:%d "
375 				 "ret = %d.", del ? "remove" : "restore",
376 				 mac_str, i, ret);
377 		}
378 	}
379 	return err;
380 }
381 
382 static int
383 hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
384 		       struct rte_ether_addr *mac_addr)
385 {
386 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
387 	int ret;
388 
389 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
390 				HNS3_MBX_MAC_VLAN_MC_ADD,
391 				mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
392 				NULL, 0);
393 	if (ret) {
394 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
395 				      mac_addr);
396 		hns3_err(hw, "Failed to add mc mac addr(%s) for vf: %d",
397 			 mac_str, ret);
398 	}
399 
400 	return ret;
401 }
402 
403 static int
404 hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
405 			  struct rte_ether_addr *mac_addr)
406 {
407 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
408 	int ret;
409 
410 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
411 				HNS3_MBX_MAC_VLAN_MC_REMOVE,
412 				mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
413 				NULL, 0);
414 	if (ret) {
415 		hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
416 				      mac_addr);
417 		hns3_err(hw, "Failed to remove mc mac addr(%s) for vf: %d",
418 			 mac_str, ret);
419 	}
420 
421 	return ret;
422 }
423 
424 static int
425 hns3vf_set_mc_addr_chk_param(struct hns3_hw *hw,
426 			     struct rte_ether_addr *mc_addr_set,
427 			     uint32_t nb_mc_addr)
428 {
429 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
430 	struct rte_ether_addr *addr;
431 	uint32_t i;
432 	uint32_t j;
433 
434 	if (nb_mc_addr > HNS3_MC_MACADDR_NUM) {
435 		hns3_err(hw, "failed to set mc mac addr, nb_mc_addr(%u) "
436 			 "invalid. valid range: 0~%d",
437 			 nb_mc_addr, HNS3_MC_MACADDR_NUM);
438 		return -EINVAL;
439 	}
440 
441 	/* Check if input mac addresses are valid */
442 	for (i = 0; i < nb_mc_addr; i++) {
443 		addr = &mc_addr_set[i];
444 		if (!rte_is_multicast_ether_addr(addr)) {
445 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
446 					      addr);
447 			hns3_err(hw,
448 				 "failed to set mc mac addr, addr(%s) invalid.",
449 				 mac_str);
450 			return -EINVAL;
451 		}
452 
453 		/* Check if there are duplicate addresses */
454 		for (j = i + 1; j < nb_mc_addr; j++) {
455 			if (rte_is_same_ether_addr(addr, &mc_addr_set[j])) {
456 				hns3_ether_format_addr(mac_str,
457 						      RTE_ETHER_ADDR_FMT_SIZE,
458 						      addr);
459 				hns3_err(hw, "failed to set mc mac addr, "
460 					 "addrs invalid. two same addrs(%s).",
461 					 mac_str);
462 				return -EINVAL;
463 			}
464 		}
465 
466 		/*
467 		 * Check if there are duplicate addresses between mac_addrs
468 		 * and mc_addr_set
469 		 */
470 		for (j = 0; j < HNS3_VF_UC_MACADDR_NUM; j++) {
471 			if (rte_is_same_ether_addr(addr,
472 						   &hw->data->mac_addrs[j])) {
473 				hns3_ether_format_addr(mac_str,
474 						      RTE_ETHER_ADDR_FMT_SIZE,
475 						      addr);
476 				hns3_err(hw, "failed to set mc mac addr, "
477 					 "addrs invalid. addrs(%s) has already "
478 					 "configured in mac_addr add API",
479 					 mac_str);
480 				return -EINVAL;
481 			}
482 		}
483 	}
484 
485 	return 0;
486 }
487 
488 static int
489 hns3vf_set_mc_mac_addr_list(struct rte_eth_dev *dev,
490 			    struct rte_ether_addr *mc_addr_set,
491 			    uint32_t nb_mc_addr)
492 {
493 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
494 	struct rte_ether_addr *addr;
495 	int cur_addr_num;
496 	int set_addr_num;
497 	int num;
498 	int ret;
499 	int i;
500 
501 	ret = hns3vf_set_mc_addr_chk_param(hw, mc_addr_set, nb_mc_addr);
502 	if (ret)
503 		return ret;
504 
505 	rte_spinlock_lock(&hw->lock);
506 	cur_addr_num = hw->mc_addrs_num;
507 	for (i = 0; i < cur_addr_num; i++) {
508 		num = cur_addr_num - i - 1;
509 		addr = &hw->mc_addrs[num];
510 		ret = hns3vf_remove_mc_mac_addr(hw, addr);
511 		if (ret) {
512 			rte_spinlock_unlock(&hw->lock);
513 			return ret;
514 		}
515 
516 		hw->mc_addrs_num--;
517 	}
518 
519 	set_addr_num = (int)nb_mc_addr;
520 	for (i = 0; i < set_addr_num; i++) {
521 		addr = &mc_addr_set[i];
522 		ret = hns3vf_add_mc_mac_addr(hw, addr);
523 		if (ret) {
524 			rte_spinlock_unlock(&hw->lock);
525 			return ret;
526 		}
527 
528 		rte_ether_addr_copy(addr, &hw->mc_addrs[hw->mc_addrs_num]);
529 		hw->mc_addrs_num++;
530 	}
531 	rte_spinlock_unlock(&hw->lock);
532 
533 	return 0;
534 }
535 
536 static int
537 hns3vf_configure_all_mc_mac_addr(struct hns3_adapter *hns, bool del)
538 {
539 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
540 	struct hns3_hw *hw = &hns->hw;
541 	struct rte_ether_addr *addr;
542 	int err = 0;
543 	int ret;
544 	int i;
545 
546 	for (i = 0; i < hw->mc_addrs_num; i++) {
547 		addr = &hw->mc_addrs[i];
548 		if (!rte_is_multicast_ether_addr(addr))
549 			continue;
550 		if (del)
551 			ret = hns3vf_remove_mc_mac_addr(hw, addr);
552 		else
553 			ret = hns3vf_add_mc_mac_addr(hw, addr);
554 		if (ret) {
555 			err = ret;
556 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
557 					      addr);
558 			hns3_err(hw, "Failed to %s mc mac addr: %s for vf: %d",
559 				 del ? "Remove" : "Restore", mac_str, ret);
560 		}
561 	}
562 	return err;
563 }
564 
565 static int
566 hns3vf_set_promisc_mode(struct hns3_hw *hw, bool en_bc_pmc,
567 			bool en_uc_pmc, bool en_mc_pmc)
568 {
569 	struct hns3_mbx_vf_to_pf_cmd *req;
570 	struct hns3_cmd_desc desc;
571 	int ret;
572 
573 	req = (struct hns3_mbx_vf_to_pf_cmd *)desc.data;
574 
575 	/*
576 	 * The hns3 VF PMD driver depends on the hns3 PF kernel ethdev driver,
577 	 * so there are some features for promiscuous/allmulticast mode in hns3
578 	 * VF PMD driver as below:
579 	 * 1. The promiscuous/allmulticast mode can be configured successfully
580 	 *    only based on the trusted VF device. If based on the non trusted
581 	 *    VF device, configuring promiscuous/allmulticast mode will fail.
582 	 *    The hns3 VF device can be confiruged as trusted device by hns3 PF
583 	 *    kernel ethdev driver on the host by the following command:
584 	 *      "ip link set <eth num> vf <vf id> turst on"
585 	 * 2. After the promiscuous mode is configured successfully, hns3 VF PMD
586 	 *    driver can receive the ingress and outgoing traffic. In the words,
587 	 *    all the ingress packets, all the packets sent from the PF and
588 	 *    other VFs on the same physical port.
589 	 * 3. Note: Because of the hardware constraints, By default vlan filter
590 	 *    is enabled and couldn't be turned off based on VF device, so vlan
591 	 *    filter is still effective even in promiscuous mode. If upper
592 	 *    applications don't call rte_eth_dev_vlan_filter API function to
593 	 *    set vlan based on VF device, hns3 VF PMD driver will can't receive
594 	 *    the packets with vlan tag in promiscuoue mode.
595 	 */
596 	hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MBX_VF_TO_PF, false);
597 	req->msg[0] = HNS3_MBX_SET_PROMISC_MODE;
598 	req->msg[1] = en_bc_pmc ? 1 : 0;
599 	req->msg[2] = en_uc_pmc ? 1 : 0;
600 	req->msg[3] = en_mc_pmc ? 1 : 0;
601 	req->msg[4] = hw->promisc_mode == HNS3_LIMIT_PROMISC_MODE ? 1 : 0;
602 
603 	ret = hns3_cmd_send(hw, &desc, 1);
604 	if (ret)
605 		hns3_err(hw, "Set promisc mode fail, ret = %d", ret);
606 
607 	return ret;
608 }
609 
610 static int
611 hns3vf_dev_promiscuous_enable(struct rte_eth_dev *dev)
612 {
613 	struct hns3_adapter *hns = dev->data->dev_private;
614 	struct hns3_hw *hw = &hns->hw;
615 	int ret;
616 
617 	ret = hns3vf_set_promisc_mode(hw, true, true, true);
618 	if (ret)
619 		hns3_err(hw, "Failed to enable promiscuous mode, ret = %d",
620 			ret);
621 	return ret;
622 }
623 
624 static int
625 hns3vf_dev_promiscuous_disable(struct rte_eth_dev *dev)
626 {
627 	bool allmulti = dev->data->all_multicast ? true : false;
628 	struct hns3_adapter *hns = dev->data->dev_private;
629 	struct hns3_hw *hw = &hns->hw;
630 	int ret;
631 
632 	ret = hns3vf_set_promisc_mode(hw, true, false, allmulti);
633 	if (ret)
634 		hns3_err(hw, "Failed to disable promiscuous mode, ret = %d",
635 			ret);
636 	return ret;
637 }
638 
639 static int
640 hns3vf_dev_allmulticast_enable(struct rte_eth_dev *dev)
641 {
642 	struct hns3_adapter *hns = dev->data->dev_private;
643 	struct hns3_hw *hw = &hns->hw;
644 	int ret;
645 
646 	if (dev->data->promiscuous)
647 		return 0;
648 
649 	ret = hns3vf_set_promisc_mode(hw, true, false, true);
650 	if (ret)
651 		hns3_err(hw, "Failed to enable allmulticast mode, ret = %d",
652 			ret);
653 	return ret;
654 }
655 
656 static int
657 hns3vf_dev_allmulticast_disable(struct rte_eth_dev *dev)
658 {
659 	struct hns3_adapter *hns = dev->data->dev_private;
660 	struct hns3_hw *hw = &hns->hw;
661 	int ret;
662 
663 	if (dev->data->promiscuous)
664 		return 0;
665 
666 	ret = hns3vf_set_promisc_mode(hw, true, false, false);
667 	if (ret)
668 		hns3_err(hw, "Failed to disable allmulticast mode, ret = %d",
669 			ret);
670 	return ret;
671 }
672 
673 static int
674 hns3vf_restore_promisc(struct hns3_adapter *hns)
675 {
676 	struct hns3_hw *hw = &hns->hw;
677 	bool allmulti = hw->data->all_multicast ? true : false;
678 
679 	if (hw->data->promiscuous)
680 		return hns3vf_set_promisc_mode(hw, true, true, true);
681 
682 	return hns3vf_set_promisc_mode(hw, true, false, allmulti);
683 }
684 
685 static int
686 hns3vf_bind_ring_with_vector(struct hns3_hw *hw, uint8_t vector_id,
687 			     bool mmap, enum hns3_ring_type queue_type,
688 			     uint16_t queue_id)
689 {
690 	struct hns3_vf_bind_vector_msg bind_msg;
691 	const char *op_str;
692 	uint16_t code;
693 	int ret;
694 
695 	memset(&bind_msg, 0, sizeof(bind_msg));
696 	code = mmap ? HNS3_MBX_MAP_RING_TO_VECTOR :
697 		HNS3_MBX_UNMAP_RING_TO_VECTOR;
698 	bind_msg.vector_id = vector_id;
699 
700 	if (queue_type == HNS3_RING_TYPE_RX)
701 		bind_msg.param[0].int_gl_index = HNS3_RING_GL_RX;
702 	else
703 		bind_msg.param[0].int_gl_index = HNS3_RING_GL_TX;
704 
705 	bind_msg.param[0].ring_type = queue_type;
706 	bind_msg.ring_num = 1;
707 	bind_msg.param[0].tqp_index = queue_id;
708 	op_str = mmap ? "Map" : "Unmap";
709 	ret = hns3_send_mbx_msg(hw, code, 0, (uint8_t *)&bind_msg,
710 				sizeof(bind_msg), false, NULL, 0);
711 	if (ret)
712 		hns3_err(hw, "%s TQP %u fail, vector_id is %u, ret is %d.",
713 			 op_str, queue_id, bind_msg.vector_id, ret);
714 
715 	return ret;
716 }
717 
718 static int
719 hns3vf_init_ring_with_vector(struct hns3_hw *hw)
720 {
721 	uint16_t vec;
722 	int ret;
723 	int i;
724 
725 	/*
726 	 * In hns3 network engine, vector 0 is always the misc interrupt of this
727 	 * function, vector 1~N can be used respectively for the queues of the
728 	 * function. Tx and Rx queues with the same number share the interrupt
729 	 * vector. In the initialization clearing the all hardware mapping
730 	 * relationship configurations between queues and interrupt vectors is
731 	 * needed, so some error caused by the residual configurations, such as
732 	 * the unexpected Tx interrupt, can be avoid.
733 	 */
734 	vec = hw->num_msi - 1; /* vector 0 for misc interrupt, not for queue */
735 	if (hw->intr.mapping_mode == HNS3_INTR_MAPPING_VEC_RSV_ONE)
736 		vec = vec - 1; /* the last interrupt is reserved */
737 	hw->intr_tqps_num = RTE_MIN(vec, hw->tqps_num);
738 	for (i = 0; i < hw->intr_tqps_num; i++) {
739 		/*
740 		 * Set gap limiter/rate limiter/quanity limiter algorithm
741 		 * configuration for interrupt coalesce of queue's interrupt.
742 		 */
743 		hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_RX,
744 				       HNS3_TQP_INTR_GL_DEFAULT);
745 		hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_TX,
746 				       HNS3_TQP_INTR_GL_DEFAULT);
747 		hns3_set_queue_intr_rl(hw, i, HNS3_TQP_INTR_RL_DEFAULT);
748 		/*
749 		 * QL(quantity limiter) is not used currently, just set 0 to
750 		 * close it.
751 		 */
752 		hns3_set_queue_intr_ql(hw, i, HNS3_TQP_INTR_QL_DEFAULT);
753 
754 		ret = hns3vf_bind_ring_with_vector(hw, vec, false,
755 						   HNS3_RING_TYPE_TX, i);
756 		if (ret) {
757 			PMD_INIT_LOG(ERR, "VF fail to unbind TX ring(%d) with "
758 					  "vector: %u, ret=%d", i, vec, ret);
759 			return ret;
760 		}
761 
762 		ret = hns3vf_bind_ring_with_vector(hw, vec, false,
763 						   HNS3_RING_TYPE_RX, i);
764 		if (ret) {
765 			PMD_INIT_LOG(ERR, "VF fail to unbind RX ring(%d) with "
766 					  "vector: %u, ret=%d", i, vec, ret);
767 			return ret;
768 		}
769 	}
770 
771 	return 0;
772 }
773 
774 static int
775 hns3vf_dev_configure(struct rte_eth_dev *dev)
776 {
777 	struct hns3_adapter *hns = dev->data->dev_private;
778 	struct hns3_hw *hw = &hns->hw;
779 	struct rte_eth_conf *conf = &dev->data->dev_conf;
780 	enum rte_eth_rx_mq_mode mq_mode = conf->rxmode.mq_mode;
781 	uint16_t nb_rx_q = dev->data->nb_rx_queues;
782 	uint16_t nb_tx_q = dev->data->nb_tx_queues;
783 	struct rte_eth_rss_conf rss_conf;
784 	uint32_t max_rx_pkt_len;
785 	uint16_t mtu;
786 	bool gro_en;
787 	int ret;
788 
789 	hw->cfg_max_queues = RTE_MAX(nb_rx_q, nb_tx_q);
790 
791 	/*
792 	 * Some versions of hardware network engine does not support
793 	 * individually enable/disable/reset the Tx or Rx queue. These devices
794 	 * must enable/disable/reset Tx and Rx queues at the same time. When the
795 	 * numbers of Tx queues allocated by upper applications are not equal to
796 	 * the numbers of Rx queues, driver needs to setup fake Tx or Rx queues
797 	 * to adjust numbers of Tx/Rx queues. otherwise, network engine can not
798 	 * work as usual. But these fake queues are imperceptible, and can not
799 	 * be used by upper applications.
800 	 */
801 	if (!hns3_dev_indep_txrx_supported(hw)) {
802 		ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
803 		if (ret) {
804 			hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.",
805 				 ret);
806 			return ret;
807 		}
808 	}
809 
810 	hw->adapter_state = HNS3_NIC_CONFIGURING;
811 	if (conf->link_speeds & ETH_LINK_SPEED_FIXED) {
812 		hns3_err(hw, "setting link speed/duplex not supported");
813 		ret = -EINVAL;
814 		goto cfg_err;
815 	}
816 
817 	/* When RSS is not configured, redirect the packet queue 0 */
818 	if ((uint32_t)mq_mode & ETH_MQ_RX_RSS_FLAG) {
819 		conf->rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
820 		hw->rss_dis_flag = false;
821 		rss_conf = conf->rx_adv_conf.rss_conf;
822 		ret = hns3_dev_rss_hash_update(dev, &rss_conf);
823 		if (ret)
824 			goto cfg_err;
825 	}
826 
827 	/*
828 	 * If jumbo frames are enabled, MTU needs to be refreshed
829 	 * according to the maximum RX packet length.
830 	 */
831 	if (conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
832 		max_rx_pkt_len = conf->rxmode.max_rx_pkt_len;
833 		if (max_rx_pkt_len > HNS3_MAX_FRAME_LEN ||
834 		    max_rx_pkt_len <= HNS3_DEFAULT_FRAME_LEN) {
835 			hns3_err(hw, "maximum Rx packet length must be greater "
836 				 "than %u and less than %u when jumbo frame enabled.",
837 				 (uint16_t)HNS3_DEFAULT_FRAME_LEN,
838 				 (uint16_t)HNS3_MAX_FRAME_LEN);
839 			ret = -EINVAL;
840 			goto cfg_err;
841 		}
842 
843 		mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(max_rx_pkt_len);
844 		ret = hns3vf_dev_mtu_set(dev, mtu);
845 		if (ret)
846 			goto cfg_err;
847 		dev->data->mtu = mtu;
848 	}
849 
850 	ret = hns3vf_dev_configure_vlan(dev);
851 	if (ret)
852 		goto cfg_err;
853 
854 	/* config hardware GRO */
855 	gro_en = conf->rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO ? true : false;
856 	ret = hns3_config_gro(hw, gro_en);
857 	if (ret)
858 		goto cfg_err;
859 
860 	hns3_init_rx_ptype_tble(dev);
861 
862 	hw->adapter_state = HNS3_NIC_CONFIGURED;
863 	return 0;
864 
865 cfg_err:
866 	(void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
867 	hw->adapter_state = HNS3_NIC_INITIALIZED;
868 
869 	return ret;
870 }
871 
872 static int
873 hns3vf_config_mtu(struct hns3_hw *hw, uint16_t mtu)
874 {
875 	int ret;
876 
877 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MTU, 0, (const uint8_t *)&mtu,
878 				sizeof(mtu), true, NULL, 0);
879 	if (ret)
880 		hns3_err(hw, "Failed to set mtu (%u) for vf: %d", mtu, ret);
881 
882 	return ret;
883 }
884 
885 static int
886 hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
887 {
888 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
889 	uint32_t frame_size = mtu + HNS3_ETH_OVERHEAD;
890 	int ret;
891 
892 	/*
893 	 * The hns3 PF/VF devices on the same port share the hardware MTU
894 	 * configuration. Currently, we send mailbox to inform hns3 PF kernel
895 	 * ethdev driver to finish hardware MTU configuration in hns3 VF PMD
896 	 * driver, there is no need to stop the port for hns3 VF device, and the
897 	 * MTU value issued by hns3 VF PMD driver must be less than or equal to
898 	 * PF's MTU.
899 	 */
900 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
901 		hns3_err(hw, "Failed to set mtu during resetting");
902 		return -EIO;
903 	}
904 
905 	/*
906 	 * when Rx of scattered packets is off, we have some possibility of
907 	 * using vector Rx process function or simple Rx functions in hns3 PMD
908 	 * driver. If the input MTU is increased and the maximum length of
909 	 * received packets is greater than the length of a buffer for Rx
910 	 * packet, the hardware network engine needs to use multiple BDs and
911 	 * buffers to store these packets. This will cause problems when still
912 	 * using vector Rx process function or simple Rx function to receiving
913 	 * packets. So, when Rx of scattered packets is off and device is
914 	 * started, it is not permitted to increase MTU so that the maximum
915 	 * length of Rx packets is greater than Rx buffer length.
916 	 */
917 	if (dev->data->dev_started && !dev->data->scattered_rx &&
918 	    frame_size > hw->rx_buf_len) {
919 		hns3_err(hw, "failed to set mtu because current is "
920 			"not scattered rx mode");
921 		return -EOPNOTSUPP;
922 	}
923 
924 	rte_spinlock_lock(&hw->lock);
925 	ret = hns3vf_config_mtu(hw, mtu);
926 	if (ret) {
927 		rte_spinlock_unlock(&hw->lock);
928 		return ret;
929 	}
930 	if (mtu > RTE_ETHER_MTU)
931 		dev->data->dev_conf.rxmode.offloads |=
932 						DEV_RX_OFFLOAD_JUMBO_FRAME;
933 	else
934 		dev->data->dev_conf.rxmode.offloads &=
935 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
936 	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
937 	rte_spinlock_unlock(&hw->lock);
938 
939 	return 0;
940 }
941 
942 static int
943 hns3vf_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
944 {
945 	struct hns3_adapter *hns = eth_dev->data->dev_private;
946 	struct hns3_hw *hw = &hns->hw;
947 	uint16_t q_num = hw->tqps_num;
948 
949 	/*
950 	 * In interrupt mode, 'max_rx_queues' is set based on the number of
951 	 * MSI-X interrupt resources of the hardware.
952 	 */
953 	if (hw->data->dev_conf.intr_conf.rxq == 1)
954 		q_num = hw->intr_tqps_num;
955 
956 	info->max_rx_queues = q_num;
957 	info->max_tx_queues = hw->tqps_num;
958 	info->max_rx_pktlen = HNS3_MAX_FRAME_LEN; /* CRC included */
959 	info->min_rx_bufsize = HNS3_MIN_BD_BUF_SIZE;
960 	info->max_mac_addrs = HNS3_VF_UC_MACADDR_NUM;
961 	info->max_mtu = info->max_rx_pktlen - HNS3_ETH_OVERHEAD;
962 	info->max_lro_pkt_size = HNS3_MAX_LRO_SIZE;
963 
964 	info->rx_offload_capa = (DEV_RX_OFFLOAD_IPV4_CKSUM |
965 				 DEV_RX_OFFLOAD_UDP_CKSUM |
966 				 DEV_RX_OFFLOAD_TCP_CKSUM |
967 				 DEV_RX_OFFLOAD_SCTP_CKSUM |
968 				 DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
969 				 DEV_RX_OFFLOAD_OUTER_UDP_CKSUM |
970 				 DEV_RX_OFFLOAD_SCATTER |
971 				 DEV_RX_OFFLOAD_VLAN_STRIP |
972 				 DEV_RX_OFFLOAD_VLAN_FILTER |
973 				 DEV_RX_OFFLOAD_JUMBO_FRAME |
974 				 DEV_RX_OFFLOAD_RSS_HASH |
975 				 DEV_RX_OFFLOAD_TCP_LRO);
976 	info->tx_offload_capa = (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
977 				 DEV_TX_OFFLOAD_IPV4_CKSUM |
978 				 DEV_TX_OFFLOAD_TCP_CKSUM |
979 				 DEV_TX_OFFLOAD_UDP_CKSUM |
980 				 DEV_TX_OFFLOAD_SCTP_CKSUM |
981 				 DEV_TX_OFFLOAD_MULTI_SEGS |
982 				 DEV_TX_OFFLOAD_TCP_TSO |
983 				 DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
984 				 DEV_TX_OFFLOAD_GRE_TNL_TSO |
985 				 DEV_TX_OFFLOAD_GENEVE_TNL_TSO |
986 				 DEV_TX_OFFLOAD_MBUF_FAST_FREE |
987 				 hns3_txvlan_cap_get(hw));
988 
989 	if (hns3_dev_outer_udp_cksum_supported(hw))
990 		info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_UDP_CKSUM;
991 
992 	if (hns3_dev_indep_txrx_supported(hw))
993 		info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
994 				 RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
995 
996 	info->rx_desc_lim = (struct rte_eth_desc_lim) {
997 		.nb_max = HNS3_MAX_RING_DESC,
998 		.nb_min = HNS3_MIN_RING_DESC,
999 		.nb_align = HNS3_ALIGN_RING_DESC,
1000 	};
1001 
1002 	info->tx_desc_lim = (struct rte_eth_desc_lim) {
1003 		.nb_max = HNS3_MAX_RING_DESC,
1004 		.nb_min = HNS3_MIN_RING_DESC,
1005 		.nb_align = HNS3_ALIGN_RING_DESC,
1006 		.nb_seg_max = HNS3_MAX_TSO_BD_PER_PKT,
1007 		.nb_mtu_seg_max = hw->max_non_tso_bd_num,
1008 	};
1009 
1010 	info->default_rxconf = (struct rte_eth_rxconf) {
1011 		.rx_free_thresh = HNS3_DEFAULT_RX_FREE_THRESH,
1012 		/*
1013 		 * If there are no available Rx buffer descriptors, incoming
1014 		 * packets are always dropped by hardware based on hns3 network
1015 		 * engine.
1016 		 */
1017 		.rx_drop_en = 1,
1018 		.offloads = 0,
1019 	};
1020 	info->default_txconf = (struct rte_eth_txconf) {
1021 		.tx_rs_thresh = HNS3_DEFAULT_TX_RS_THRESH,
1022 		.offloads = 0,
1023 	};
1024 
1025 	info->vmdq_queue_num = 0;
1026 
1027 	info->reta_size = hw->rss_ind_tbl_size;
1028 	info->hash_key_size = HNS3_RSS_KEY_SIZE;
1029 	info->flow_type_rss_offloads = HNS3_ETH_RSS_SUPPORT;
1030 	info->default_rxportconf.ring_size = HNS3_DEFAULT_RING_DESC;
1031 	info->default_txportconf.ring_size = HNS3_DEFAULT_RING_DESC;
1032 
1033 	return 0;
1034 }
1035 
1036 static void
1037 hns3vf_clear_event_cause(struct hns3_hw *hw, uint32_t regclr)
1038 {
1039 	hns3_write_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG, regclr);
1040 }
1041 
1042 static void
1043 hns3vf_disable_irq0(struct hns3_hw *hw)
1044 {
1045 	hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 0);
1046 }
1047 
1048 static void
1049 hns3vf_enable_irq0(struct hns3_hw *hw)
1050 {
1051 	hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 1);
1052 }
1053 
1054 static enum hns3vf_evt_cause
1055 hns3vf_check_event_cause(struct hns3_adapter *hns, uint32_t *clearval)
1056 {
1057 	struct hns3_hw *hw = &hns->hw;
1058 	enum hns3vf_evt_cause ret;
1059 	uint32_t cmdq_stat_reg;
1060 	uint32_t rst_ing_reg;
1061 	uint32_t val;
1062 
1063 	/* Fetch the events from their corresponding regs */
1064 	cmdq_stat_reg = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_STAT_REG);
1065 	if (BIT(HNS3_VECTOR0_RST_INT_B) & cmdq_stat_reg) {
1066 		rst_ing_reg = hns3_read_dev(hw, HNS3_FUN_RST_ING);
1067 		hns3_warn(hw, "resetting reg: 0x%x", rst_ing_reg);
1068 		hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
1069 		__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
1070 		val = hns3_read_dev(hw, HNS3_VF_RST_ING);
1071 		hns3_write_dev(hw, HNS3_VF_RST_ING, val | HNS3_VF_RST_ING_BIT);
1072 		val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RST_INT_B);
1073 		if (clearval) {
1074 			hw->reset.stats.global_cnt++;
1075 			hns3_warn(hw, "Global reset detected, clear reset status");
1076 		} else {
1077 			hns3_schedule_delayed_reset(hns);
1078 			hns3_warn(hw, "Global reset detected, don't clear reset status");
1079 		}
1080 
1081 		ret = HNS3VF_VECTOR0_EVENT_RST;
1082 		goto out;
1083 	}
1084 
1085 	/* Check for vector0 mailbox(=CMDQ RX) event source */
1086 	if (BIT(HNS3_VECTOR0_RX_CMDQ_INT_B) & cmdq_stat_reg) {
1087 		val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RX_CMDQ_INT_B);
1088 		ret = HNS3VF_VECTOR0_EVENT_MBX;
1089 		goto out;
1090 	}
1091 
1092 	val = 0;
1093 	ret = HNS3VF_VECTOR0_EVENT_OTHER;
1094 out:
1095 	if (clearval)
1096 		*clearval = val;
1097 	return ret;
1098 }
1099 
1100 static void
1101 hns3vf_interrupt_handler(void *param)
1102 {
1103 	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
1104 	struct hns3_adapter *hns = dev->data->dev_private;
1105 	struct hns3_hw *hw = &hns->hw;
1106 	enum hns3vf_evt_cause event_cause;
1107 	uint32_t clearval;
1108 
1109 	/* Disable interrupt */
1110 	hns3vf_disable_irq0(hw);
1111 
1112 	/* Read out interrupt causes */
1113 	event_cause = hns3vf_check_event_cause(hns, &clearval);
1114 
1115 	switch (event_cause) {
1116 	case HNS3VF_VECTOR0_EVENT_RST:
1117 		hns3_schedule_reset(hns);
1118 		break;
1119 	case HNS3VF_VECTOR0_EVENT_MBX:
1120 		hns3_dev_handle_mbx_msg(hw);
1121 		break;
1122 	default:
1123 		break;
1124 	}
1125 
1126 	/* Clear interrupt causes */
1127 	hns3vf_clear_event_cause(hw, clearval);
1128 
1129 	/* Enable interrupt */
1130 	hns3vf_enable_irq0(hw);
1131 }
1132 
1133 static void
1134 hns3vf_set_default_dev_specifications(struct hns3_hw *hw)
1135 {
1136 	hw->max_non_tso_bd_num = HNS3_MAX_NON_TSO_BD_PER_PKT;
1137 	hw->rss_ind_tbl_size = HNS3_RSS_IND_TBL_SIZE;
1138 	hw->rss_key_size = HNS3_RSS_KEY_SIZE;
1139 	hw->intr.int_ql_max = HNS3_INTR_QL_NONE;
1140 }
1141 
1142 static void
1143 hns3vf_parse_dev_specifications(struct hns3_hw *hw, struct hns3_cmd_desc *desc)
1144 {
1145 	struct hns3_dev_specs_0_cmd *req0;
1146 
1147 	req0 = (struct hns3_dev_specs_0_cmd *)desc[0].data;
1148 
1149 	hw->max_non_tso_bd_num = req0->max_non_tso_bd_num;
1150 	hw->rss_ind_tbl_size = rte_le_to_cpu_16(req0->rss_ind_tbl_size);
1151 	hw->rss_key_size = rte_le_to_cpu_16(req0->rss_key_size);
1152 	hw->intr.int_ql_max = rte_le_to_cpu_16(req0->intr_ql_max);
1153 }
1154 
1155 static int
1156 hns3vf_check_dev_specifications(struct hns3_hw *hw)
1157 {
1158 	if (hw->rss_ind_tbl_size == 0 ||
1159 	    hw->rss_ind_tbl_size > HNS3_RSS_IND_TBL_SIZE_MAX) {
1160 		hns3_warn(hw, "the size of hash lookup table configured (%u)"
1161 			      " exceeds the maximum(%u)", hw->rss_ind_tbl_size,
1162 			      HNS3_RSS_IND_TBL_SIZE_MAX);
1163 		return -EINVAL;
1164 	}
1165 
1166 	return 0;
1167 }
1168 
1169 static int
1170 hns3vf_query_dev_specifications(struct hns3_hw *hw)
1171 {
1172 	struct hns3_cmd_desc desc[HNS3_QUERY_DEV_SPECS_BD_NUM];
1173 	int ret;
1174 	int i;
1175 
1176 	for (i = 0; i < HNS3_QUERY_DEV_SPECS_BD_NUM - 1; i++) {
1177 		hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS,
1178 					  true);
1179 		desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
1180 	}
1181 	hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS, true);
1182 
1183 	ret = hns3_cmd_send(hw, desc, HNS3_QUERY_DEV_SPECS_BD_NUM);
1184 	if (ret)
1185 		return ret;
1186 
1187 	hns3vf_parse_dev_specifications(hw, desc);
1188 
1189 	return hns3vf_check_dev_specifications(hw);
1190 }
1191 
1192 void
1193 hns3vf_update_push_lsc_cap(struct hns3_hw *hw, bool supported)
1194 {
1195 	uint16_t val = supported ? HNS3_PF_PUSH_LSC_CAP_SUPPORTED :
1196 				   HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
1197 	uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
1198 	struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1199 
1200 	if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
1201 		__atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
1202 					  __ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
1203 }
1204 
1205 static void
1206 hns3vf_get_push_lsc_cap(struct hns3_hw *hw)
1207 {
1208 #define HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS	500
1209 
1210 	struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
1211 	int32_t remain_ms = HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS;
1212 	uint16_t val = HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
1213 	uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
1214 	struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1215 
1216 	__atomic_store_n(&vf->pf_push_lsc_cap, HNS3_PF_PUSH_LSC_CAP_UNKNOWN,
1217 			 __ATOMIC_RELEASE);
1218 
1219 	(void)hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
1220 				NULL, 0);
1221 
1222 	while (remain_ms > 0) {
1223 		rte_delay_ms(HNS3_POLL_RESPONE_MS);
1224 		if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) !=
1225 			HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
1226 			break;
1227 		remain_ms--;
1228 	}
1229 
1230 	/*
1231 	 * When exit above loop, the pf_push_lsc_cap could be one of the three
1232 	 * state: unknown (means pf not ack), not_supported, supported.
1233 	 * Here config it as 'not_supported' when it's 'unknown' state.
1234 	 */
1235 	__atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
1236 				  __ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
1237 
1238 	if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) ==
1239 		HNS3_PF_PUSH_LSC_CAP_SUPPORTED) {
1240 		hns3_info(hw, "detect PF support push link status change!");
1241 	} else {
1242 		/*
1243 		 * Framework already set RTE_ETH_DEV_INTR_LSC bit because driver
1244 		 * declared RTE_PCI_DRV_INTR_LSC in drv_flags. So here cleared
1245 		 * the RTE_ETH_DEV_INTR_LSC capability.
1246 		 */
1247 		dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
1248 	}
1249 }
1250 
1251 static int
1252 hns3vf_get_capability(struct hns3_hw *hw)
1253 {
1254 	struct rte_pci_device *pci_dev;
1255 	struct rte_eth_dev *eth_dev;
1256 	uint8_t revision;
1257 	int ret;
1258 
1259 	eth_dev = &rte_eth_devices[hw->data->port_id];
1260 	pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
1261 
1262 	/* Get PCI revision id */
1263 	ret = rte_pci_read_config(pci_dev, &revision, HNS3_PCI_REVISION_ID_LEN,
1264 				  HNS3_PCI_REVISION_ID);
1265 	if (ret != HNS3_PCI_REVISION_ID_LEN) {
1266 		PMD_INIT_LOG(ERR, "failed to read pci revision id, ret = %d",
1267 			     ret);
1268 		return -EIO;
1269 	}
1270 	hw->revision = revision;
1271 
1272 	if (revision < PCI_REVISION_ID_HIP09_A) {
1273 		hns3vf_set_default_dev_specifications(hw);
1274 		hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_RSV_ONE;
1275 		hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_2US;
1276 		hw->tso_mode = HNS3_TSO_SW_CAL_PSEUDO_H_CSUM;
1277 		hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE1;
1278 		hw->min_tx_pkt_len = HNS3_HIP08_MIN_TX_PKT_LEN;
1279 		hw->rss_info.ipv6_sctp_offload_supported = false;
1280 		hw->promisc_mode = HNS3_UNLIMIT_PROMISC_MODE;
1281 		return 0;
1282 	}
1283 
1284 	ret = hns3vf_query_dev_specifications(hw);
1285 	if (ret) {
1286 		PMD_INIT_LOG(ERR,
1287 			     "failed to query dev specifications, ret = %d",
1288 			     ret);
1289 		return ret;
1290 	}
1291 
1292 	hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_ALL;
1293 	hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_1US;
1294 	hw->tso_mode = HNS3_TSO_HW_CAL_PSEUDO_H_CSUM;
1295 	hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE2;
1296 	hw->min_tx_pkt_len = HNS3_HIP09_MIN_TX_PKT_LEN;
1297 	hw->rss_info.ipv6_sctp_offload_supported = true;
1298 	hw->promisc_mode = HNS3_LIMIT_PROMISC_MODE;
1299 
1300 	return 0;
1301 }
1302 
1303 static int
1304 hns3vf_check_tqp_info(struct hns3_hw *hw)
1305 {
1306 	if (hw->tqps_num == 0) {
1307 		PMD_INIT_LOG(ERR, "Get invalid tqps_num(0) from PF.");
1308 		return -EINVAL;
1309 	}
1310 
1311 	if (hw->rss_size_max == 0) {
1312 		PMD_INIT_LOG(ERR, "Get invalid rss_size_max(0) from PF.");
1313 		return -EINVAL;
1314 	}
1315 
1316 	hw->tqps_num = RTE_MIN(hw->rss_size_max, hw->tqps_num);
1317 
1318 	return 0;
1319 }
1320 
1321 static int
1322 hns3vf_get_port_base_vlan_filter_state(struct hns3_hw *hw)
1323 {
1324 	uint8_t resp_msg;
1325 	int ret;
1326 
1327 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN,
1328 				HNS3_MBX_GET_PORT_BASE_VLAN_STATE, NULL, 0,
1329 				true, &resp_msg, sizeof(resp_msg));
1330 	if (ret) {
1331 		if (ret == -ETIME) {
1332 			/*
1333 			 * Getting current port based VLAN state from PF driver
1334 			 * will not affect VF driver's basic function. Because
1335 			 * the VF driver relies on hns3 PF kernel ether driver,
1336 			 * to avoid introducing compatibility issues with older
1337 			 * version of PF driver, no failure will be returned
1338 			 * when the return value is ETIME. This return value has
1339 			 * the following scenarios:
1340 			 * 1) Firmware didn't return the results in time
1341 			 * 2) the result return by firmware is timeout
1342 			 * 3) the older version of kernel side PF driver does
1343 			 *    not support this mailbox message.
1344 			 * For scenarios 1 and 2, it is most likely that a
1345 			 * hardware error has occurred, or a hardware reset has
1346 			 * occurred. In this case, these errors will be caught
1347 			 * by other functions.
1348 			 */
1349 			PMD_INIT_LOG(WARNING,
1350 				"failed to get PVID state for timeout, maybe "
1351 				"kernel side PF driver doesn't support this "
1352 				"mailbox message, or firmware didn't respond.");
1353 			resp_msg = HNS3_PORT_BASE_VLAN_DISABLE;
1354 		} else {
1355 			PMD_INIT_LOG(ERR, "failed to get port based VLAN state,"
1356 				" ret = %d", ret);
1357 			return ret;
1358 		}
1359 	}
1360 	hw->port_base_vlan_cfg.state = resp_msg ?
1361 		HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
1362 	return 0;
1363 }
1364 
1365 static int
1366 hns3vf_get_queue_info(struct hns3_hw *hw)
1367 {
1368 #define HNS3VF_TQPS_RSS_INFO_LEN	6
1369 	uint8_t resp_msg[HNS3VF_TQPS_RSS_INFO_LEN];
1370 	int ret;
1371 
1372 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_QINFO, 0, NULL, 0, true,
1373 				resp_msg, HNS3VF_TQPS_RSS_INFO_LEN);
1374 	if (ret) {
1375 		PMD_INIT_LOG(ERR, "Failed to get tqp info from PF: %d", ret);
1376 		return ret;
1377 	}
1378 
1379 	memcpy(&hw->tqps_num, &resp_msg[0], sizeof(uint16_t));
1380 	memcpy(&hw->rss_size_max, &resp_msg[2], sizeof(uint16_t));
1381 
1382 	return hns3vf_check_tqp_info(hw);
1383 }
1384 
1385 static int
1386 hns3vf_get_queue_depth(struct hns3_hw *hw)
1387 {
1388 #define HNS3VF_TQPS_DEPTH_INFO_LEN	4
1389 	uint8_t resp_msg[HNS3VF_TQPS_DEPTH_INFO_LEN];
1390 	int ret;
1391 
1392 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_QDEPTH, 0, NULL, 0, true,
1393 				resp_msg, HNS3VF_TQPS_DEPTH_INFO_LEN);
1394 	if (ret) {
1395 		PMD_INIT_LOG(ERR, "Failed to get tqp depth info from PF: %d",
1396 			     ret);
1397 		return ret;
1398 	}
1399 
1400 	memcpy(&hw->num_tx_desc, &resp_msg[0], sizeof(uint16_t));
1401 	memcpy(&hw->num_rx_desc, &resp_msg[2], sizeof(uint16_t));
1402 
1403 	return 0;
1404 }
1405 
1406 static int
1407 hns3vf_get_tc_info(struct hns3_hw *hw)
1408 {
1409 	uint8_t resp_msg;
1410 	int ret;
1411 	uint32_t i;
1412 
1413 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_TCINFO, 0, NULL, 0,
1414 				true, &resp_msg, sizeof(resp_msg));
1415 	if (ret) {
1416 		hns3_err(hw, "VF request to get TC info from PF failed %d",
1417 			 ret);
1418 		return ret;
1419 	}
1420 
1421 	hw->hw_tc_map = resp_msg;
1422 
1423 	for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
1424 		if (hw->hw_tc_map & BIT(i))
1425 			hw->num_tc++;
1426 	}
1427 
1428 	return 0;
1429 }
1430 
1431 static int
1432 hns3vf_get_host_mac_addr(struct hns3_hw *hw)
1433 {
1434 	uint8_t host_mac[RTE_ETHER_ADDR_LEN];
1435 	int ret;
1436 
1437 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_MAC_ADDR, 0, NULL, 0,
1438 				true, host_mac, RTE_ETHER_ADDR_LEN);
1439 	if (ret) {
1440 		hns3_err(hw, "Failed to get mac addr from PF: %d", ret);
1441 		return ret;
1442 	}
1443 
1444 	memcpy(hw->mac.mac_addr, host_mac, RTE_ETHER_ADDR_LEN);
1445 
1446 	return 0;
1447 }
1448 
1449 static int
1450 hns3vf_get_configuration(struct hns3_hw *hw)
1451 {
1452 	int ret;
1453 
1454 	hw->mac.media_type = HNS3_MEDIA_TYPE_NONE;
1455 	hw->rss_dis_flag = false;
1456 
1457 	/* Get device capability */
1458 	ret = hns3vf_get_capability(hw);
1459 	if (ret) {
1460 		PMD_INIT_LOG(ERR, "failed to get device capability: %d.", ret);
1461 		return ret;
1462 	}
1463 
1464 	hns3vf_get_push_lsc_cap(hw);
1465 
1466 	/* Get queue configuration from PF */
1467 	ret = hns3vf_get_queue_info(hw);
1468 	if (ret)
1469 		return ret;
1470 
1471 	/* Get queue depth info from PF */
1472 	ret = hns3vf_get_queue_depth(hw);
1473 	if (ret)
1474 		return ret;
1475 
1476 	/* Get user defined VF MAC addr from PF */
1477 	ret = hns3vf_get_host_mac_addr(hw);
1478 	if (ret)
1479 		return ret;
1480 
1481 	ret = hns3vf_get_port_base_vlan_filter_state(hw);
1482 	if (ret)
1483 		return ret;
1484 
1485 	/* Get tc configuration from PF */
1486 	return hns3vf_get_tc_info(hw);
1487 }
1488 
1489 static int
1490 hns3vf_set_tc_queue_mapping(struct hns3_adapter *hns, uint16_t nb_rx_q,
1491 			    uint16_t nb_tx_q)
1492 {
1493 	struct hns3_hw *hw = &hns->hw;
1494 
1495 	if (nb_rx_q < hw->num_tc) {
1496 		hns3_err(hw, "number of Rx queues(%u) is less than tcs(%u).",
1497 			 nb_rx_q, hw->num_tc);
1498 		return -EINVAL;
1499 	}
1500 
1501 	if (nb_tx_q < hw->num_tc) {
1502 		hns3_err(hw, "number of Tx queues(%u) is less than tcs(%u).",
1503 			 nb_tx_q, hw->num_tc);
1504 		return -EINVAL;
1505 	}
1506 
1507 	return hns3_queue_to_tc_mapping(hw, nb_rx_q, nb_tx_q);
1508 }
1509 
1510 static void
1511 hns3vf_request_link_info(struct hns3_hw *hw)
1512 {
1513 	struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1514 	bool send_req;
1515 	int ret;
1516 
1517 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
1518 		return;
1519 
1520 	send_req = vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED ||
1521 		   vf->req_link_info_cnt > 0;
1522 	if (!send_req)
1523 		return;
1524 
1525 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
1526 				NULL, 0);
1527 	if (ret) {
1528 		hns3_err(hw, "failed to fetch link status, ret = %d", ret);
1529 		return;
1530 	}
1531 
1532 	if (vf->req_link_info_cnt > 0)
1533 		vf->req_link_info_cnt--;
1534 }
1535 
1536 void
1537 hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
1538 			  uint32_t link_speed, uint8_t link_duplex)
1539 {
1540 	struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
1541 	struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1542 	struct hns3_mac *mac = &hw->mac;
1543 	int ret;
1544 
1545 	/*
1546 	 * PF kernel driver may push link status when VF driver is in resetting,
1547 	 * driver will stop polling job in this case, after resetting done
1548 	 * driver will start polling job again.
1549 	 * When polling job started, driver will get initial link status by
1550 	 * sending request to PF kernel driver, then could update link status by
1551 	 * process PF kernel driver's link status mailbox message.
1552 	 */
1553 	if (!__atomic_load_n(&vf->poll_job_started, __ATOMIC_RELAXED))
1554 		return;
1555 
1556 	if (hw->adapter_state != HNS3_NIC_STARTED)
1557 		return;
1558 
1559 	mac->link_status = link_status;
1560 	mac->link_speed = link_speed;
1561 	mac->link_duplex = link_duplex;
1562 	ret = hns3vf_dev_link_update(dev, 0);
1563 	if (ret == 0 && dev->data->dev_conf.intr_conf.lsc != 0)
1564 		hns3_start_report_lse(dev);
1565 }
1566 
1567 static int
1568 hns3vf_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
1569 {
1570 #define HNS3VF_VLAN_MBX_MSG_LEN 5
1571 	struct hns3_hw *hw = &hns->hw;
1572 	uint8_t msg_data[HNS3VF_VLAN_MBX_MSG_LEN];
1573 	uint16_t proto = htons(RTE_ETHER_TYPE_VLAN);
1574 	uint8_t is_kill = on ? 0 : 1;
1575 
1576 	msg_data[0] = is_kill;
1577 	memcpy(&msg_data[1], &vlan_id, sizeof(vlan_id));
1578 	memcpy(&msg_data[3], &proto, sizeof(proto));
1579 
1580 	return hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_FILTER,
1581 				 msg_data, HNS3VF_VLAN_MBX_MSG_LEN, true, NULL,
1582 				 0);
1583 }
1584 
1585 static int
1586 hns3vf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
1587 {
1588 	struct hns3_adapter *hns = dev->data->dev_private;
1589 	struct hns3_hw *hw = &hns->hw;
1590 	int ret;
1591 
1592 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
1593 		hns3_err(hw,
1594 			 "vf set vlan id failed during resetting, vlan_id =%u",
1595 			 vlan_id);
1596 		return -EIO;
1597 	}
1598 	rte_spinlock_lock(&hw->lock);
1599 	ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
1600 	rte_spinlock_unlock(&hw->lock);
1601 	if (ret)
1602 		hns3_err(hw, "vf set vlan id failed, vlan_id =%u, ret =%d",
1603 			 vlan_id, ret);
1604 
1605 	return ret;
1606 }
1607 
1608 static int
1609 hns3vf_en_hw_strip_rxvtag(struct hns3_hw *hw, bool enable)
1610 {
1611 	uint8_t msg_data;
1612 	int ret;
1613 
1614 	msg_data = enable ? 1 : 0;
1615 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_RX_OFF_CFG,
1616 				&msg_data, sizeof(msg_data), false, NULL, 0);
1617 	if (ret)
1618 		hns3_err(hw, "vf enable strip failed, ret =%d", ret);
1619 
1620 	return ret;
1621 }
1622 
1623 static int
1624 hns3vf_vlan_offload_set(struct rte_eth_dev *dev, int mask)
1625 {
1626 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1627 	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
1628 	unsigned int tmp_mask;
1629 	int ret = 0;
1630 
1631 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
1632 		hns3_err(hw, "vf set vlan offload failed during resetting, "
1633 			     "mask = 0x%x", mask);
1634 		return -EIO;
1635 	}
1636 
1637 	tmp_mask = (unsigned int)mask;
1638 	/* Vlan stripping setting */
1639 	if (tmp_mask & ETH_VLAN_STRIP_MASK) {
1640 		rte_spinlock_lock(&hw->lock);
1641 		/* Enable or disable VLAN stripping */
1642 		if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
1643 			ret = hns3vf_en_hw_strip_rxvtag(hw, true);
1644 		else
1645 			ret = hns3vf_en_hw_strip_rxvtag(hw, false);
1646 		rte_spinlock_unlock(&hw->lock);
1647 	}
1648 
1649 	return ret;
1650 }
1651 
1652 static int
1653 hns3vf_handle_all_vlan_table(struct hns3_adapter *hns, int on)
1654 {
1655 	struct rte_vlan_filter_conf *vfc;
1656 	struct hns3_hw *hw = &hns->hw;
1657 	uint16_t vlan_id;
1658 	uint64_t vbit;
1659 	uint64_t ids;
1660 	int ret = 0;
1661 	uint32_t i;
1662 
1663 	vfc = &hw->data->vlan_filter_conf;
1664 	for (i = 0; i < RTE_DIM(vfc->ids); i++) {
1665 		if (vfc->ids[i] == 0)
1666 			continue;
1667 		ids = vfc->ids[i];
1668 		while (ids) {
1669 			/*
1670 			 * 64 means the num bits of ids, one bit corresponds to
1671 			 * one vlan id
1672 			 */
1673 			vlan_id = 64 * i;
1674 			/* count trailing zeroes */
1675 			vbit = ~ids & (ids - 1);
1676 			/* clear least significant bit set */
1677 			ids ^= (ids ^ (ids - 1)) ^ vbit;
1678 			for (; vbit;) {
1679 				vbit >>= 1;
1680 				vlan_id++;
1681 			}
1682 			ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
1683 			if (ret) {
1684 				hns3_err(hw,
1685 					 "VF handle vlan table failed, ret =%d, on = %d",
1686 					 ret, on);
1687 				return ret;
1688 			}
1689 		}
1690 	}
1691 
1692 	return ret;
1693 }
1694 
1695 static int
1696 hns3vf_remove_all_vlan_table(struct hns3_adapter *hns)
1697 {
1698 	return hns3vf_handle_all_vlan_table(hns, 0);
1699 }
1700 
1701 static int
1702 hns3vf_restore_vlan_conf(struct hns3_adapter *hns)
1703 {
1704 	struct hns3_hw *hw = &hns->hw;
1705 	struct rte_eth_conf *dev_conf;
1706 	bool en;
1707 	int ret;
1708 
1709 	dev_conf = &hw->data->dev_conf;
1710 	en = dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_VLAN_STRIP ? true
1711 								   : false;
1712 	ret = hns3vf_en_hw_strip_rxvtag(hw, en);
1713 	if (ret)
1714 		hns3_err(hw, "VF restore vlan conf fail, en =%d, ret =%d", en,
1715 			 ret);
1716 	return ret;
1717 }
1718 
1719 static int
1720 hns3vf_dev_configure_vlan(struct rte_eth_dev *dev)
1721 {
1722 	struct hns3_adapter *hns = dev->data->dev_private;
1723 	struct rte_eth_dev_data *data = dev->data;
1724 	struct hns3_hw *hw = &hns->hw;
1725 	int ret;
1726 
1727 	if (data->dev_conf.txmode.hw_vlan_reject_tagged ||
1728 	    data->dev_conf.txmode.hw_vlan_reject_untagged ||
1729 	    data->dev_conf.txmode.hw_vlan_insert_pvid) {
1730 		hns3_warn(hw, "hw_vlan_reject_tagged, hw_vlan_reject_untagged "
1731 			      "or hw_vlan_insert_pvid is not support!");
1732 	}
1733 
1734 	/* Apply vlan offload setting */
1735 	ret = hns3vf_vlan_offload_set(dev, ETH_VLAN_STRIP_MASK);
1736 	if (ret)
1737 		hns3_err(hw, "dev config vlan offload failed, ret =%d", ret);
1738 
1739 	return ret;
1740 }
1741 
1742 static int
1743 hns3vf_set_alive(struct hns3_hw *hw, bool alive)
1744 {
1745 	uint8_t msg_data;
1746 
1747 	msg_data = alive ? 1 : 0;
1748 	return hns3_send_mbx_msg(hw, HNS3_MBX_SET_ALIVE, 0, &msg_data,
1749 				 sizeof(msg_data), false, NULL, 0);
1750 }
1751 
1752 static void
1753 hns3vf_keep_alive_handler(void *param)
1754 {
1755 	struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
1756 	struct hns3_adapter *hns = eth_dev->data->dev_private;
1757 	struct hns3_hw *hw = &hns->hw;
1758 	int ret;
1759 
1760 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_KEEP_ALIVE, 0, NULL, 0,
1761 				false, NULL, 0);
1762 	if (ret)
1763 		hns3_err(hw, "VF sends keeping alive cmd failed(=%d)",
1764 			 ret);
1765 
1766 	rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
1767 			  eth_dev);
1768 }
1769 
1770 static void
1771 hns3vf_service_handler(void *param)
1772 {
1773 	struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
1774 	struct hns3_adapter *hns = eth_dev->data->dev_private;
1775 	struct hns3_hw *hw = &hns->hw;
1776 
1777 	/*
1778 	 * The query link status and reset processing are executed in the
1779 	 * interrupt thread. When the IMP reset occurs, IMP will not respond,
1780 	 * and the query operation will timeout after 30ms. In the case of
1781 	 * multiple PF/VFs, each query failure timeout causes the IMP reset
1782 	 * interrupt to fail to respond within 100ms.
1783 	 * Before querying the link status, check whether there is a reset
1784 	 * pending, and if so, abandon the query.
1785 	 */
1786 	if (!hns3vf_is_reset_pending(hns))
1787 		hns3vf_request_link_info(hw);
1788 	else
1789 		hns3_warn(hw, "Cancel the query when reset is pending");
1790 
1791 	rte_eal_alarm_set(HNS3VF_SERVICE_INTERVAL, hns3vf_service_handler,
1792 			  eth_dev);
1793 }
1794 
1795 static void
1796 hns3vf_start_poll_job(struct rte_eth_dev *dev)
1797 {
1798 #define HNS3_REQUEST_LINK_INFO_REMAINS_CNT	3
1799 
1800 	struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
1801 
1802 	if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_SUPPORTED)
1803 		vf->req_link_info_cnt = HNS3_REQUEST_LINK_INFO_REMAINS_CNT;
1804 
1805 	__atomic_store_n(&vf->poll_job_started, 1, __ATOMIC_RELAXED);
1806 
1807 	hns3vf_service_handler(dev);
1808 }
1809 
1810 static void
1811 hns3vf_stop_poll_job(struct rte_eth_dev *dev)
1812 {
1813 	struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
1814 
1815 	rte_eal_alarm_cancel(hns3vf_service_handler, dev);
1816 
1817 	__atomic_store_n(&vf->poll_job_started, 0, __ATOMIC_RELAXED);
1818 }
1819 
1820 static int
1821 hns3_query_vf_resource(struct hns3_hw *hw)
1822 {
1823 	struct hns3_vf_res_cmd *req;
1824 	struct hns3_cmd_desc desc;
1825 	uint16_t num_msi;
1826 	int ret;
1827 
1828 	hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_VF_RSRC, true);
1829 	ret = hns3_cmd_send(hw, &desc, 1);
1830 	if (ret) {
1831 		hns3_err(hw, "query vf resource failed, ret = %d", ret);
1832 		return ret;
1833 	}
1834 
1835 	req = (struct hns3_vf_res_cmd *)desc.data;
1836 	num_msi = hns3_get_field(rte_le_to_cpu_16(req->vf_intr_vector_number),
1837 				 HNS3_VF_VEC_NUM_M, HNS3_VF_VEC_NUM_S);
1838 	if (num_msi < HNS3_MIN_VECTOR_NUM) {
1839 		hns3_err(hw, "Just %u msi resources, not enough for vf(min:%d)",
1840 			 num_msi, HNS3_MIN_VECTOR_NUM);
1841 		return -EINVAL;
1842 	}
1843 
1844 	hw->num_msi = num_msi;
1845 
1846 	return 0;
1847 }
1848 
1849 static int
1850 hns3vf_init_hardware(struct hns3_adapter *hns)
1851 {
1852 	struct hns3_hw *hw = &hns->hw;
1853 	uint16_t mtu = hw->data->mtu;
1854 	int ret;
1855 
1856 	ret = hns3vf_set_promisc_mode(hw, true, false, false);
1857 	if (ret)
1858 		return ret;
1859 
1860 	ret = hns3vf_config_mtu(hw, mtu);
1861 	if (ret)
1862 		goto err_init_hardware;
1863 
1864 	ret = hns3vf_vlan_filter_configure(hns, 0, 1);
1865 	if (ret) {
1866 		PMD_INIT_LOG(ERR, "Failed to initialize VLAN config: %d", ret);
1867 		goto err_init_hardware;
1868 	}
1869 
1870 	ret = hns3_config_gro(hw, false);
1871 	if (ret) {
1872 		PMD_INIT_LOG(ERR, "Failed to config gro: %d", ret);
1873 		goto err_init_hardware;
1874 	}
1875 
1876 	/*
1877 	 * In the initialization clearing the all hardware mapping relationship
1878 	 * configurations between queues and interrupt vectors is needed, so
1879 	 * some error caused by the residual configurations, such as the
1880 	 * unexpected interrupt, can be avoid.
1881 	 */
1882 	ret = hns3vf_init_ring_with_vector(hw);
1883 	if (ret) {
1884 		PMD_INIT_LOG(ERR, "Failed to init ring intr vector: %d", ret);
1885 		goto err_init_hardware;
1886 	}
1887 
1888 	ret = hns3vf_set_alive(hw, true);
1889 	if (ret) {
1890 		PMD_INIT_LOG(ERR, "Failed to VF send alive to PF: %d", ret);
1891 		goto err_init_hardware;
1892 	}
1893 
1894 	return 0;
1895 
1896 err_init_hardware:
1897 	(void)hns3vf_set_promisc_mode(hw, false, false, false);
1898 	return ret;
1899 }
1900 
1901 static int
1902 hns3vf_clear_vport_list(struct hns3_hw *hw)
1903 {
1904 	return hns3_send_mbx_msg(hw, HNS3_MBX_HANDLE_VF_TBL,
1905 				 HNS3_MBX_VPORT_LIST_CLEAR, NULL, 0, false,
1906 				 NULL, 0);
1907 }
1908 
1909 static int
1910 hns3vf_init_vf(struct rte_eth_dev *eth_dev)
1911 {
1912 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
1913 	struct hns3_adapter *hns = eth_dev->data->dev_private;
1914 	struct hns3_hw *hw = &hns->hw;
1915 	int ret;
1916 
1917 	PMD_INIT_FUNC_TRACE();
1918 
1919 	/* Get hardware io base address from pcie BAR2 IO space */
1920 	hw->io_base = pci_dev->mem_resource[2].addr;
1921 
1922 	/* Firmware command queue initialize */
1923 	ret = hns3_cmd_init_queue(hw);
1924 	if (ret) {
1925 		PMD_INIT_LOG(ERR, "Failed to init cmd queue: %d", ret);
1926 		goto err_cmd_init_queue;
1927 	}
1928 
1929 	/* Firmware command initialize */
1930 	ret = hns3_cmd_init(hw);
1931 	if (ret) {
1932 		PMD_INIT_LOG(ERR, "Failed to init cmd: %d", ret);
1933 		goto err_cmd_init;
1934 	}
1935 
1936 	/* Get VF resource */
1937 	ret = hns3_query_vf_resource(hw);
1938 	if (ret)
1939 		goto err_cmd_init;
1940 
1941 	rte_spinlock_init(&hw->mbx_resp.lock);
1942 
1943 	hns3vf_clear_event_cause(hw, 0);
1944 
1945 	ret = rte_intr_callback_register(&pci_dev->intr_handle,
1946 					 hns3vf_interrupt_handler, eth_dev);
1947 	if (ret) {
1948 		PMD_INIT_LOG(ERR, "Failed to register intr: %d", ret);
1949 		goto err_intr_callback_register;
1950 	}
1951 
1952 	/* Enable interrupt */
1953 	rte_intr_enable(&pci_dev->intr_handle);
1954 	hns3vf_enable_irq0(hw);
1955 
1956 	/* Get configuration from PF */
1957 	ret = hns3vf_get_configuration(hw);
1958 	if (ret) {
1959 		PMD_INIT_LOG(ERR, "Failed to fetch configuration: %d", ret);
1960 		goto err_get_config;
1961 	}
1962 
1963 	ret = hns3_tqp_stats_init(hw);
1964 	if (ret)
1965 		goto err_get_config;
1966 
1967 	/* Hardware statistics of imissed registers cleared. */
1968 	ret = hns3_update_imissed_stats(hw, true);
1969 	if (ret) {
1970 		hns3_err(hw, "clear imissed stats failed, ret = %d", ret);
1971 		goto err_set_tc_queue;
1972 	}
1973 
1974 	ret = hns3vf_set_tc_queue_mapping(hns, hw->tqps_num, hw->tqps_num);
1975 	if (ret) {
1976 		PMD_INIT_LOG(ERR, "failed to set tc info, ret = %d.", ret);
1977 		goto err_set_tc_queue;
1978 	}
1979 
1980 	ret = hns3vf_clear_vport_list(hw);
1981 	if (ret) {
1982 		PMD_INIT_LOG(ERR, "Failed to clear tbl list: %d", ret);
1983 		goto err_set_tc_queue;
1984 	}
1985 
1986 	ret = hns3vf_init_hardware(hns);
1987 	if (ret)
1988 		goto err_set_tc_queue;
1989 
1990 	hns3_rss_set_default_args(hw);
1991 
1992 	return 0;
1993 
1994 err_set_tc_queue:
1995 	hns3_tqp_stats_uninit(hw);
1996 
1997 err_get_config:
1998 	hns3vf_disable_irq0(hw);
1999 	rte_intr_disable(&pci_dev->intr_handle);
2000 	hns3_intr_unregister(&pci_dev->intr_handle, hns3vf_interrupt_handler,
2001 			     eth_dev);
2002 err_intr_callback_register:
2003 err_cmd_init:
2004 	hns3_cmd_uninit(hw);
2005 	hns3_cmd_destroy_queue(hw);
2006 err_cmd_init_queue:
2007 	hw->io_base = NULL;
2008 
2009 	return ret;
2010 }
2011 
2012 static void
2013 hns3vf_uninit_vf(struct rte_eth_dev *eth_dev)
2014 {
2015 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
2016 	struct hns3_adapter *hns = eth_dev->data->dev_private;
2017 	struct hns3_hw *hw = &hns->hw;
2018 
2019 	PMD_INIT_FUNC_TRACE();
2020 
2021 	hns3_rss_uninit(hns);
2022 	(void)hns3_config_gro(hw, false);
2023 	(void)hns3vf_set_alive(hw, false);
2024 	(void)hns3vf_set_promisc_mode(hw, false, false, false);
2025 	hns3_tqp_stats_uninit(hw);
2026 	hns3vf_disable_irq0(hw);
2027 	rte_intr_disable(&pci_dev->intr_handle);
2028 	hns3_intr_unregister(&pci_dev->intr_handle, hns3vf_interrupt_handler,
2029 			     eth_dev);
2030 	hns3_cmd_uninit(hw);
2031 	hns3_cmd_destroy_queue(hw);
2032 	hw->io_base = NULL;
2033 }
2034 
2035 static int
2036 hns3vf_do_stop(struct hns3_adapter *hns)
2037 {
2038 	struct hns3_hw *hw = &hns->hw;
2039 	int ret;
2040 
2041 	hw->mac.link_status = ETH_LINK_DOWN;
2042 
2043 	/*
2044 	 * The "hns3vf_do_stop" function will also be called by .stop_service to
2045 	 * prepare reset. At the time of global or IMP reset, the command cannot
2046 	 * be sent to stop the tx/rx queues. The mbuf in Tx/Rx queues may be
2047 	 * accessed during the reset process. So the mbuf can not be released
2048 	 * during reset and is required to be released after the reset is
2049 	 * completed.
2050 	 */
2051 	if (__atomic_load_n(&hw->reset.resetting,  __ATOMIC_RELAXED) == 0)
2052 		hns3_dev_release_mbufs(hns);
2053 
2054 	if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0) {
2055 		hns3vf_configure_mac_addr(hns, true);
2056 		ret = hns3_reset_all_tqps(hns);
2057 		if (ret) {
2058 			hns3_err(hw, "failed to reset all queues ret = %d",
2059 				 ret);
2060 			return ret;
2061 		}
2062 	}
2063 	return 0;
2064 }
2065 
2066 static void
2067 hns3vf_unmap_rx_interrupt(struct rte_eth_dev *dev)
2068 {
2069 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
2070 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
2071 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
2072 	uint8_t base = RTE_INTR_VEC_ZERO_OFFSET;
2073 	uint8_t vec = RTE_INTR_VEC_ZERO_OFFSET;
2074 	uint16_t q_id;
2075 
2076 	if (dev->data->dev_conf.intr_conf.rxq == 0)
2077 		return;
2078 
2079 	/* unmap the ring with vector */
2080 	if (rte_intr_allow_others(intr_handle)) {
2081 		vec = RTE_INTR_VEC_RXTX_OFFSET;
2082 		base = RTE_INTR_VEC_RXTX_OFFSET;
2083 	}
2084 	if (rte_intr_dp_is_en(intr_handle)) {
2085 		for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
2086 			(void)hns3vf_bind_ring_with_vector(hw, vec, false,
2087 							   HNS3_RING_TYPE_RX,
2088 							   q_id);
2089 			if (vec < base + intr_handle->nb_efd - 1)
2090 				vec++;
2091 		}
2092 	}
2093 	/* Clean datapath event and queue/vec mapping */
2094 	rte_intr_efd_disable(intr_handle);
2095 	if (intr_handle->intr_vec) {
2096 		rte_free(intr_handle->intr_vec);
2097 		intr_handle->intr_vec = NULL;
2098 	}
2099 }
2100 
2101 static int
2102 hns3vf_dev_stop(struct rte_eth_dev *dev)
2103 {
2104 	struct hns3_adapter *hns = dev->data->dev_private;
2105 	struct hns3_hw *hw = &hns->hw;
2106 
2107 	PMD_INIT_FUNC_TRACE();
2108 	dev->data->dev_started = 0;
2109 
2110 	hw->adapter_state = HNS3_NIC_STOPPING;
2111 	hns3_set_rxtx_function(dev);
2112 	rte_wmb();
2113 	/* Disable datapath on secondary process. */
2114 	hns3_mp_req_stop_rxtx(dev);
2115 	/* Prevent crashes when queues are still in use. */
2116 	rte_delay_ms(hw->tqps_num);
2117 
2118 	rte_spinlock_lock(&hw->lock);
2119 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
2120 		hns3_stop_tqps(hw);
2121 		hns3vf_do_stop(hns);
2122 		hns3vf_unmap_rx_interrupt(dev);
2123 		hw->adapter_state = HNS3_NIC_CONFIGURED;
2124 	}
2125 	hns3_rx_scattered_reset(dev);
2126 	hns3vf_stop_poll_job(dev);
2127 	hns3_stop_report_lse(dev);
2128 	rte_spinlock_unlock(&hw->lock);
2129 
2130 	return 0;
2131 }
2132 
2133 static int
2134 hns3vf_dev_close(struct rte_eth_dev *eth_dev)
2135 {
2136 	struct hns3_adapter *hns = eth_dev->data->dev_private;
2137 	struct hns3_hw *hw = &hns->hw;
2138 	int ret = 0;
2139 
2140 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
2141 		rte_free(eth_dev->process_private);
2142 		eth_dev->process_private = NULL;
2143 		return 0;
2144 	}
2145 
2146 	if (hw->adapter_state == HNS3_NIC_STARTED)
2147 		ret = hns3vf_dev_stop(eth_dev);
2148 
2149 	hw->adapter_state = HNS3_NIC_CLOSING;
2150 	hns3_reset_abort(hns);
2151 	hw->adapter_state = HNS3_NIC_CLOSED;
2152 	rte_eal_alarm_cancel(hns3vf_keep_alive_handler, eth_dev);
2153 	hns3vf_configure_all_mc_mac_addr(hns, true);
2154 	hns3vf_remove_all_vlan_table(hns);
2155 	hns3vf_uninit_vf(eth_dev);
2156 	hns3_free_all_queues(eth_dev);
2157 	rte_free(hw->reset.wait_data);
2158 	rte_free(eth_dev->process_private);
2159 	eth_dev->process_private = NULL;
2160 	hns3_mp_uninit_primary();
2161 	hns3_warn(hw, "Close port %u finished", hw->data->port_id);
2162 
2163 	return ret;
2164 }
2165 
2166 static int
2167 hns3vf_fw_version_get(struct rte_eth_dev *eth_dev, char *fw_version,
2168 		      size_t fw_size)
2169 {
2170 	struct hns3_adapter *hns = eth_dev->data->dev_private;
2171 	struct hns3_hw *hw = &hns->hw;
2172 	uint32_t version = hw->fw_version;
2173 	int ret;
2174 
2175 	ret = snprintf(fw_version, fw_size, "%lu.%lu.%lu.%lu",
2176 		       hns3_get_field(version, HNS3_FW_VERSION_BYTE3_M,
2177 				      HNS3_FW_VERSION_BYTE3_S),
2178 		       hns3_get_field(version, HNS3_FW_VERSION_BYTE2_M,
2179 				      HNS3_FW_VERSION_BYTE2_S),
2180 		       hns3_get_field(version, HNS3_FW_VERSION_BYTE1_M,
2181 				      HNS3_FW_VERSION_BYTE1_S),
2182 		       hns3_get_field(version, HNS3_FW_VERSION_BYTE0_M,
2183 				      HNS3_FW_VERSION_BYTE0_S));
2184 	ret += 1; /* add the size of '\0' */
2185 	if (fw_size < (uint32_t)ret)
2186 		return ret;
2187 	else
2188 		return 0;
2189 }
2190 
2191 static int
2192 hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
2193 		       __rte_unused int wait_to_complete)
2194 {
2195 	struct hns3_adapter *hns = eth_dev->data->dev_private;
2196 	struct hns3_hw *hw = &hns->hw;
2197 	struct hns3_mac *mac = &hw->mac;
2198 	struct rte_eth_link new_link;
2199 
2200 	memset(&new_link, 0, sizeof(new_link));
2201 	switch (mac->link_speed) {
2202 	case ETH_SPEED_NUM_10M:
2203 	case ETH_SPEED_NUM_100M:
2204 	case ETH_SPEED_NUM_1G:
2205 	case ETH_SPEED_NUM_10G:
2206 	case ETH_SPEED_NUM_25G:
2207 	case ETH_SPEED_NUM_40G:
2208 	case ETH_SPEED_NUM_50G:
2209 	case ETH_SPEED_NUM_100G:
2210 	case ETH_SPEED_NUM_200G:
2211 		new_link.link_speed = mac->link_speed;
2212 		break;
2213 	default:
2214 		if (mac->link_status)
2215 			new_link.link_speed = ETH_SPEED_NUM_UNKNOWN;
2216 		else
2217 			new_link.link_speed = ETH_SPEED_NUM_NONE;
2218 		break;
2219 	}
2220 
2221 	new_link.link_duplex = mac->link_duplex;
2222 	new_link.link_status = mac->link_status ? ETH_LINK_UP : ETH_LINK_DOWN;
2223 	new_link.link_autoneg =
2224 	    !(eth_dev->data->dev_conf.link_speeds & ETH_LINK_SPEED_FIXED);
2225 
2226 	return rte_eth_linkstatus_set(eth_dev, &new_link);
2227 }
2228 
2229 static int
2230 hns3vf_do_start(struct hns3_adapter *hns, bool reset_queue)
2231 {
2232 	struct hns3_hw *hw = &hns->hw;
2233 	uint16_t nb_rx_q = hw->data->nb_rx_queues;
2234 	uint16_t nb_tx_q = hw->data->nb_tx_queues;
2235 	int ret;
2236 
2237 	ret = hns3vf_set_tc_queue_mapping(hns, nb_rx_q, nb_tx_q);
2238 	if (ret)
2239 		return ret;
2240 
2241 	hns3_enable_rxd_adv_layout(hw);
2242 
2243 	ret = hns3_init_queues(hns, reset_queue);
2244 	if (ret)
2245 		hns3_err(hw, "failed to init queues, ret = %d.", ret);
2246 
2247 	return ret;
2248 }
2249 
2250 static int
2251 hns3vf_map_rx_interrupt(struct rte_eth_dev *dev)
2252 {
2253 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
2254 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
2255 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
2256 	uint8_t base = RTE_INTR_VEC_ZERO_OFFSET;
2257 	uint8_t vec = RTE_INTR_VEC_ZERO_OFFSET;
2258 	uint32_t intr_vector;
2259 	uint16_t q_id;
2260 	int ret;
2261 
2262 	/*
2263 	 * hns3 needs a separate interrupt to be used as event interrupt which
2264 	 * could not be shared with task queue pair, so KERNEL drivers need
2265 	 * support multiple interrupt vectors.
2266 	 */
2267 	if (dev->data->dev_conf.intr_conf.rxq == 0 ||
2268 	    !rte_intr_cap_multiple(intr_handle))
2269 		return 0;
2270 
2271 	rte_intr_disable(intr_handle);
2272 	intr_vector = hw->used_rx_queues;
2273 	/* It creates event fd for each intr vector when MSIX is used */
2274 	if (rte_intr_efd_enable(intr_handle, intr_vector))
2275 		return -EINVAL;
2276 
2277 	if (intr_handle->intr_vec == NULL) {
2278 		intr_handle->intr_vec =
2279 			rte_zmalloc("intr_vec",
2280 				    hw->used_rx_queues * sizeof(int), 0);
2281 		if (intr_handle->intr_vec == NULL) {
2282 			hns3_err(hw, "Failed to allocate %u rx_queues"
2283 				     " intr_vec", hw->used_rx_queues);
2284 			ret = -ENOMEM;
2285 			goto vf_alloc_intr_vec_error;
2286 		}
2287 	}
2288 
2289 	if (rte_intr_allow_others(intr_handle)) {
2290 		vec = RTE_INTR_VEC_RXTX_OFFSET;
2291 		base = RTE_INTR_VEC_RXTX_OFFSET;
2292 	}
2293 
2294 	for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
2295 		ret = hns3vf_bind_ring_with_vector(hw, vec, true,
2296 						   HNS3_RING_TYPE_RX, q_id);
2297 		if (ret)
2298 			goto vf_bind_vector_error;
2299 		intr_handle->intr_vec[q_id] = vec;
2300 		/*
2301 		 * If there are not enough efds (e.g. not enough interrupt),
2302 		 * remaining queues will be bond to the last interrupt.
2303 		 */
2304 		if (vec < base + intr_handle->nb_efd - 1)
2305 			vec++;
2306 	}
2307 	rte_intr_enable(intr_handle);
2308 	return 0;
2309 
2310 vf_bind_vector_error:
2311 	free(intr_handle->intr_vec);
2312 	intr_handle->intr_vec = NULL;
2313 vf_alloc_intr_vec_error:
2314 	rte_intr_efd_disable(intr_handle);
2315 	return ret;
2316 }
2317 
2318 static int
2319 hns3vf_restore_rx_interrupt(struct hns3_hw *hw)
2320 {
2321 	struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
2322 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
2323 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
2324 	uint16_t q_id;
2325 	int ret;
2326 
2327 	if (dev->data->dev_conf.intr_conf.rxq == 0)
2328 		return 0;
2329 
2330 	if (rte_intr_dp_is_en(intr_handle)) {
2331 		for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
2332 			ret = hns3vf_bind_ring_with_vector(hw,
2333 					intr_handle->intr_vec[q_id], true,
2334 					HNS3_RING_TYPE_RX, q_id);
2335 			if (ret)
2336 				return ret;
2337 		}
2338 	}
2339 
2340 	return 0;
2341 }
2342 
2343 static void
2344 hns3vf_restore_filter(struct rte_eth_dev *dev)
2345 {
2346 	hns3_restore_rss_filter(dev);
2347 }
2348 
2349 static int
2350 hns3vf_dev_start(struct rte_eth_dev *dev)
2351 {
2352 	struct hns3_adapter *hns = dev->data->dev_private;
2353 	struct hns3_hw *hw = &hns->hw;
2354 	int ret;
2355 
2356 	PMD_INIT_FUNC_TRACE();
2357 	if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
2358 		return -EBUSY;
2359 
2360 	rte_spinlock_lock(&hw->lock);
2361 	hw->adapter_state = HNS3_NIC_STARTING;
2362 	ret = hns3vf_do_start(hns, true);
2363 	if (ret) {
2364 		hw->adapter_state = HNS3_NIC_CONFIGURED;
2365 		rte_spinlock_unlock(&hw->lock);
2366 		return ret;
2367 	}
2368 	ret = hns3vf_map_rx_interrupt(dev);
2369 	if (ret)
2370 		goto map_rx_inter_err;
2371 
2372 	/*
2373 	 * There are three register used to control the status of a TQP
2374 	 * (contains a pair of Tx queue and Rx queue) in the new version network
2375 	 * engine. One is used to control the enabling of Tx queue, the other is
2376 	 * used to control the enabling of Rx queue, and the last is the master
2377 	 * switch used to control the enabling of the tqp. The Tx register and
2378 	 * TQP register must be enabled at the same time to enable a Tx queue.
2379 	 * The same applies to the Rx queue. For the older network enginem, this
2380 	 * function only refresh the enabled flag, and it is used to update the
2381 	 * status of queue in the dpdk framework.
2382 	 */
2383 	ret = hns3_start_all_txqs(dev);
2384 	if (ret)
2385 		goto map_rx_inter_err;
2386 
2387 	ret = hns3_start_all_rxqs(dev);
2388 	if (ret)
2389 		goto start_all_rxqs_fail;
2390 
2391 	hw->adapter_state = HNS3_NIC_STARTED;
2392 	rte_spinlock_unlock(&hw->lock);
2393 
2394 	hns3_rx_scattered_calc(dev);
2395 	hns3_set_rxtx_function(dev);
2396 	hns3_mp_req_start_rxtx(dev);
2397 
2398 	hns3vf_restore_filter(dev);
2399 
2400 	/* Enable interrupt of all rx queues before enabling queues */
2401 	hns3_dev_all_rx_queue_intr_enable(hw, true);
2402 	hns3_start_tqps(hw);
2403 
2404 	if (dev->data->dev_conf.intr_conf.lsc != 0)
2405 		hns3vf_dev_link_update(dev, 0);
2406 	hns3vf_start_poll_job(dev);
2407 
2408 	return ret;
2409 
2410 start_all_rxqs_fail:
2411 	hns3_stop_all_txqs(dev);
2412 map_rx_inter_err:
2413 	(void)hns3vf_do_stop(hns);
2414 	hw->adapter_state = HNS3_NIC_CONFIGURED;
2415 	rte_spinlock_unlock(&hw->lock);
2416 
2417 	return ret;
2418 }
2419 
2420 static bool
2421 is_vf_reset_done(struct hns3_hw *hw)
2422 {
2423 #define HNS3_FUN_RST_ING_BITS \
2424 	(BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) | \
2425 	 BIT(HNS3_VECTOR0_CORERESET_INT_B) | \
2426 	 BIT(HNS3_VECTOR0_IMPRESET_INT_B) | \
2427 	 BIT(HNS3_VECTOR0_FUNCRESET_INT_B))
2428 
2429 	uint32_t val;
2430 
2431 	if (hw->reset.level == HNS3_VF_RESET) {
2432 		val = hns3_read_dev(hw, HNS3_VF_RST_ING);
2433 		if (val & HNS3_VF_RST_ING_BIT)
2434 			return false;
2435 	} else {
2436 		val = hns3_read_dev(hw, HNS3_FUN_RST_ING);
2437 		if (val & HNS3_FUN_RST_ING_BITS)
2438 			return false;
2439 	}
2440 	return true;
2441 }
2442 
2443 bool
2444 hns3vf_is_reset_pending(struct hns3_adapter *hns)
2445 {
2446 	struct hns3_hw *hw = &hns->hw;
2447 	enum hns3_reset_level reset;
2448 
2449 	/*
2450 	 * According to the protocol of PCIe, FLR to a PF device resets the PF
2451 	 * state as well as the SR-IOV extended capability including VF Enable
2452 	 * which means that VFs no longer exist.
2453 	 *
2454 	 * HNS3_VF_FULL_RESET means PF device is in FLR reset. when PF device
2455 	 * is in FLR stage, the register state of VF device is not reliable,
2456 	 * so register states detection can not be carried out. In this case,
2457 	 * we just ignore the register states and return false to indicate that
2458 	 * there are no other reset states that need to be processed by driver.
2459 	 */
2460 	if (hw->reset.level == HNS3_VF_FULL_RESET)
2461 		return false;
2462 
2463 	/* Check the registers to confirm whether there is reset pending */
2464 	hns3vf_check_event_cause(hns, NULL);
2465 	reset = hns3vf_get_reset_level(hw, &hw->reset.pending);
2466 	if (hw->reset.level != HNS3_NONE_RESET && reset != HNS3_NONE_RESET &&
2467 	    hw->reset.level < reset) {
2468 		hns3_warn(hw, "High level reset %d is pending", reset);
2469 		return true;
2470 	}
2471 	return false;
2472 }
2473 
2474 static int
2475 hns3vf_wait_hardware_ready(struct hns3_adapter *hns)
2476 {
2477 	struct hns3_hw *hw = &hns->hw;
2478 	struct hns3_wait_data *wait_data = hw->reset.wait_data;
2479 	struct timeval tv;
2480 
2481 	if (wait_data->result == HNS3_WAIT_SUCCESS) {
2482 		/*
2483 		 * After vf reset is ready, the PF may not have completed
2484 		 * the reset processing. The vf sending mbox to PF may fail
2485 		 * during the pf reset, so it is better to add extra delay.
2486 		 */
2487 		if (hw->reset.level == HNS3_VF_FUNC_RESET ||
2488 		    hw->reset.level == HNS3_FLR_RESET)
2489 			return 0;
2490 		/* Reset retry process, no need to add extra delay. */
2491 		if (hw->reset.attempts)
2492 			return 0;
2493 		if (wait_data->check_completion == NULL)
2494 			return 0;
2495 
2496 		wait_data->check_completion = NULL;
2497 		wait_data->interval = 1 * MSEC_PER_SEC * USEC_PER_MSEC;
2498 		wait_data->count = 1;
2499 		wait_data->result = HNS3_WAIT_REQUEST;
2500 		rte_eal_alarm_set(wait_data->interval, hns3_wait_callback,
2501 				  wait_data);
2502 		hns3_warn(hw, "hardware is ready, delay 1 sec for PF reset complete");
2503 		return -EAGAIN;
2504 	} else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
2505 		gettimeofday(&tv, NULL);
2506 		hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
2507 			  tv.tv_sec, tv.tv_usec);
2508 		return -ETIME;
2509 	} else if (wait_data->result == HNS3_WAIT_REQUEST)
2510 		return -EAGAIN;
2511 
2512 	wait_data->hns = hns;
2513 	wait_data->check_completion = is_vf_reset_done;
2514 	wait_data->end_ms = (uint64_t)HNS3VF_RESET_WAIT_CNT *
2515 				      HNS3VF_RESET_WAIT_MS + get_timeofday_ms();
2516 	wait_data->interval = HNS3VF_RESET_WAIT_MS * USEC_PER_MSEC;
2517 	wait_data->count = HNS3VF_RESET_WAIT_CNT;
2518 	wait_data->result = HNS3_WAIT_REQUEST;
2519 	rte_eal_alarm_set(wait_data->interval, hns3_wait_callback, wait_data);
2520 	return -EAGAIN;
2521 }
2522 
2523 static int
2524 hns3vf_prepare_reset(struct hns3_adapter *hns)
2525 {
2526 	struct hns3_hw *hw = &hns->hw;
2527 	int ret;
2528 
2529 	if (hw->reset.level == HNS3_VF_FUNC_RESET) {
2530 		ret = hns3_send_mbx_msg(hw, HNS3_MBX_RESET, 0, NULL,
2531 					0, true, NULL, 0);
2532 		if (ret)
2533 			return ret;
2534 	}
2535 	__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
2536 
2537 	return 0;
2538 }
2539 
2540 static int
2541 hns3vf_stop_service(struct hns3_adapter *hns)
2542 {
2543 	struct hns3_hw *hw = &hns->hw;
2544 	struct rte_eth_dev *eth_dev;
2545 
2546 	eth_dev = &rte_eth_devices[hw->data->port_id];
2547 	if (hw->adapter_state == HNS3_NIC_STARTED) {
2548 		/*
2549 		 * Make sure call update link status before hns3vf_stop_poll_job
2550 		 * because update link status depend on polling job exist.
2551 		 */
2552 		hns3vf_update_link_status(hw, ETH_LINK_DOWN, hw->mac.link_speed,
2553 					  hw->mac.link_duplex);
2554 		hns3vf_stop_poll_job(eth_dev);
2555 	}
2556 	hw->mac.link_status = ETH_LINK_DOWN;
2557 
2558 	hns3_set_rxtx_function(eth_dev);
2559 	rte_wmb();
2560 	/* Disable datapath on secondary process. */
2561 	hns3_mp_req_stop_rxtx(eth_dev);
2562 	rte_delay_ms(hw->tqps_num);
2563 
2564 	rte_spinlock_lock(&hw->lock);
2565 	if (hw->adapter_state == HNS3_NIC_STARTED ||
2566 	    hw->adapter_state == HNS3_NIC_STOPPING) {
2567 		hns3_enable_all_queues(hw, false);
2568 		hns3vf_do_stop(hns);
2569 		hw->reset.mbuf_deferred_free = true;
2570 	} else
2571 		hw->reset.mbuf_deferred_free = false;
2572 
2573 	/*
2574 	 * It is cumbersome for hardware to pick-and-choose entries for deletion
2575 	 * from table space. Hence, for function reset software intervention is
2576 	 * required to delete the entries.
2577 	 */
2578 	if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0)
2579 		hns3vf_configure_all_mc_mac_addr(hns, true);
2580 	rte_spinlock_unlock(&hw->lock);
2581 
2582 	return 0;
2583 }
2584 
2585 static int
2586 hns3vf_start_service(struct hns3_adapter *hns)
2587 {
2588 	struct hns3_hw *hw = &hns->hw;
2589 	struct rte_eth_dev *eth_dev;
2590 
2591 	eth_dev = &rte_eth_devices[hw->data->port_id];
2592 	hns3_set_rxtx_function(eth_dev);
2593 	hns3_mp_req_start_rxtx(eth_dev);
2594 	if (hw->adapter_state == HNS3_NIC_STARTED) {
2595 		hns3vf_start_poll_job(eth_dev);
2596 
2597 		/* Enable interrupt of all rx queues before enabling queues */
2598 		hns3_dev_all_rx_queue_intr_enable(hw, true);
2599 		/*
2600 		 * Enable state of each rxq and txq will be recovered after
2601 		 * reset, so we need to restore them before enable all tqps;
2602 		 */
2603 		hns3_restore_tqp_enable_state(hw);
2604 		/*
2605 		 * When finished the initialization, enable queues to receive
2606 		 * and transmit packets.
2607 		 */
2608 		hns3_enable_all_queues(hw, true);
2609 	}
2610 
2611 	return 0;
2612 }
2613 
2614 static int
2615 hns3vf_check_default_mac_change(struct hns3_hw *hw)
2616 {
2617 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
2618 	struct rte_ether_addr *hw_mac;
2619 	int ret;
2620 
2621 	/*
2622 	 * The hns3 PF ethdev driver in kernel support setting VF MAC address
2623 	 * on the host by "ip link set ..." command. If the hns3 PF kernel
2624 	 * ethdev driver sets the MAC address for VF device after the
2625 	 * initialization of the related VF device, the PF driver will notify
2626 	 * VF driver to reset VF device to make the new MAC address effective
2627 	 * immediately. The hns3 VF PMD driver should check whether the MAC
2628 	 * address has been changed by the PF kernel ethdev driver, if changed
2629 	 * VF driver should configure hardware using the new MAC address in the
2630 	 * recovering hardware configuration stage of the reset process.
2631 	 */
2632 	ret = hns3vf_get_host_mac_addr(hw);
2633 	if (ret)
2634 		return ret;
2635 
2636 	hw_mac = (struct rte_ether_addr *)hw->mac.mac_addr;
2637 	ret = rte_is_zero_ether_addr(hw_mac);
2638 	if (ret) {
2639 		rte_ether_addr_copy(&hw->data->mac_addrs[0], hw_mac);
2640 	} else {
2641 		ret = rte_is_same_ether_addr(&hw->data->mac_addrs[0], hw_mac);
2642 		if (!ret) {
2643 			rte_ether_addr_copy(hw_mac, &hw->data->mac_addrs[0]);
2644 			hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
2645 					      &hw->data->mac_addrs[0]);
2646 			hns3_warn(hw, "Default MAC address has been changed to:"
2647 				  " %s by the host PF kernel ethdev driver",
2648 				  mac_str);
2649 		}
2650 	}
2651 
2652 	return 0;
2653 }
2654 
2655 static int
2656 hns3vf_restore_conf(struct hns3_adapter *hns)
2657 {
2658 	struct hns3_hw *hw = &hns->hw;
2659 	int ret;
2660 
2661 	ret = hns3vf_check_default_mac_change(hw);
2662 	if (ret)
2663 		return ret;
2664 
2665 	ret = hns3vf_configure_mac_addr(hns, false);
2666 	if (ret)
2667 		return ret;
2668 
2669 	ret = hns3vf_configure_all_mc_mac_addr(hns, false);
2670 	if (ret)
2671 		goto err_mc_mac;
2672 
2673 	ret = hns3vf_restore_promisc(hns);
2674 	if (ret)
2675 		goto err_vlan_table;
2676 
2677 	ret = hns3vf_restore_vlan_conf(hns);
2678 	if (ret)
2679 		goto err_vlan_table;
2680 
2681 	ret = hns3vf_get_port_base_vlan_filter_state(hw);
2682 	if (ret)
2683 		goto err_vlan_table;
2684 
2685 	ret = hns3vf_restore_rx_interrupt(hw);
2686 	if (ret)
2687 		goto err_vlan_table;
2688 
2689 	ret = hns3_restore_gro_conf(hw);
2690 	if (ret)
2691 		goto err_vlan_table;
2692 
2693 	if (hw->adapter_state == HNS3_NIC_STARTED) {
2694 		ret = hns3vf_do_start(hns, false);
2695 		if (ret)
2696 			goto err_vlan_table;
2697 		hns3_info(hw, "hns3vf dev restart successful!");
2698 	} else if (hw->adapter_state == HNS3_NIC_STOPPING)
2699 		hw->adapter_state = HNS3_NIC_CONFIGURED;
2700 	return 0;
2701 
2702 err_vlan_table:
2703 	hns3vf_configure_all_mc_mac_addr(hns, true);
2704 err_mc_mac:
2705 	hns3vf_configure_mac_addr(hns, true);
2706 	return ret;
2707 }
2708 
2709 static enum hns3_reset_level
2710 hns3vf_get_reset_level(struct hns3_hw *hw, uint64_t *levels)
2711 {
2712 	enum hns3_reset_level reset_level;
2713 
2714 	/* return the highest priority reset level amongst all */
2715 	if (hns3_atomic_test_bit(HNS3_VF_RESET, levels))
2716 		reset_level = HNS3_VF_RESET;
2717 	else if (hns3_atomic_test_bit(HNS3_VF_FULL_RESET, levels))
2718 		reset_level = HNS3_VF_FULL_RESET;
2719 	else if (hns3_atomic_test_bit(HNS3_VF_PF_FUNC_RESET, levels))
2720 		reset_level = HNS3_VF_PF_FUNC_RESET;
2721 	else if (hns3_atomic_test_bit(HNS3_VF_FUNC_RESET, levels))
2722 		reset_level = HNS3_VF_FUNC_RESET;
2723 	else if (hns3_atomic_test_bit(HNS3_FLR_RESET, levels))
2724 		reset_level = HNS3_FLR_RESET;
2725 	else
2726 		reset_level = HNS3_NONE_RESET;
2727 
2728 	if (hw->reset.level != HNS3_NONE_RESET && reset_level < hw->reset.level)
2729 		return HNS3_NONE_RESET;
2730 
2731 	return reset_level;
2732 }
2733 
2734 static void
2735 hns3vf_reset_service(void *param)
2736 {
2737 	struct hns3_adapter *hns = (struct hns3_adapter *)param;
2738 	struct hns3_hw *hw = &hns->hw;
2739 	enum hns3_reset_level reset_level;
2740 	struct timeval tv_delta;
2741 	struct timeval tv_start;
2742 	struct timeval tv;
2743 	uint64_t msec;
2744 
2745 	/*
2746 	 * The interrupt is not triggered within the delay time.
2747 	 * The interrupt may have been lost. It is necessary to handle
2748 	 * the interrupt to recover from the error.
2749 	 */
2750 	if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
2751 			    SCHEDULE_DEFERRED) {
2752 		__atomic_store_n(&hw->reset.schedule, SCHEDULE_REQUESTED,
2753 				 __ATOMIC_RELAXED);
2754 		hns3_err(hw, "Handling interrupts in delayed tasks");
2755 		hns3vf_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
2756 		reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
2757 		if (reset_level == HNS3_NONE_RESET) {
2758 			hns3_err(hw, "No reset level is set, try global reset");
2759 			hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
2760 		}
2761 	}
2762 	__atomic_store_n(&hw->reset.schedule, SCHEDULE_NONE, __ATOMIC_RELAXED);
2763 
2764 	/*
2765 	 * Hardware reset has been notified, we now have to poll & check if
2766 	 * hardware has actually completed the reset sequence.
2767 	 */
2768 	reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
2769 	if (reset_level != HNS3_NONE_RESET) {
2770 		gettimeofday(&tv_start, NULL);
2771 		hns3_reset_process(hns, reset_level);
2772 		gettimeofday(&tv, NULL);
2773 		timersub(&tv, &tv_start, &tv_delta);
2774 		msec = tv_delta.tv_sec * MSEC_PER_SEC +
2775 		       tv_delta.tv_usec / USEC_PER_MSEC;
2776 		if (msec > HNS3_RESET_PROCESS_MS)
2777 			hns3_err(hw, "%d handle long time delta %" PRIx64
2778 				 " ms time=%ld.%.6ld",
2779 				 hw->reset.level, msec, tv.tv_sec, tv.tv_usec);
2780 	}
2781 }
2782 
2783 static int
2784 hns3vf_reinit_dev(struct hns3_adapter *hns)
2785 {
2786 	struct rte_eth_dev *eth_dev = &rte_eth_devices[hns->hw.data->port_id];
2787 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
2788 	struct hns3_hw *hw = &hns->hw;
2789 	int ret;
2790 
2791 	if (hw->reset.level == HNS3_VF_FULL_RESET) {
2792 		rte_intr_disable(&pci_dev->intr_handle);
2793 		ret = hns3vf_set_bus_master(pci_dev, true);
2794 		if (ret < 0) {
2795 			hns3_err(hw, "failed to set pci bus, ret = %d", ret);
2796 			return ret;
2797 		}
2798 	}
2799 
2800 	/* Firmware command initialize */
2801 	ret = hns3_cmd_init(hw);
2802 	if (ret) {
2803 		hns3_err(hw, "Failed to init cmd: %d", ret);
2804 		return ret;
2805 	}
2806 
2807 	if (hw->reset.level == HNS3_VF_FULL_RESET) {
2808 		/*
2809 		 * UIO enables msix by writing the pcie configuration space
2810 		 * vfio_pci enables msix in rte_intr_enable.
2811 		 */
2812 		if (pci_dev->kdrv == RTE_PCI_KDRV_IGB_UIO ||
2813 		    pci_dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
2814 			if (hns3vf_enable_msix(pci_dev, true))
2815 				hns3_err(hw, "Failed to enable msix");
2816 		}
2817 
2818 		rte_intr_enable(&pci_dev->intr_handle);
2819 	}
2820 
2821 	ret = hns3_reset_all_tqps(hns);
2822 	if (ret) {
2823 		hns3_err(hw, "Failed to reset all queues: %d", ret);
2824 		return ret;
2825 	}
2826 
2827 	ret = hns3vf_init_hardware(hns);
2828 	if (ret) {
2829 		hns3_err(hw, "Failed to init hardware: %d", ret);
2830 		return ret;
2831 	}
2832 
2833 	return 0;
2834 }
2835 
2836 static const struct eth_dev_ops hns3vf_eth_dev_ops = {
2837 	.dev_configure      = hns3vf_dev_configure,
2838 	.dev_start          = hns3vf_dev_start,
2839 	.dev_stop           = hns3vf_dev_stop,
2840 	.dev_close          = hns3vf_dev_close,
2841 	.mtu_set            = hns3vf_dev_mtu_set,
2842 	.promiscuous_enable = hns3vf_dev_promiscuous_enable,
2843 	.promiscuous_disable = hns3vf_dev_promiscuous_disable,
2844 	.allmulticast_enable = hns3vf_dev_allmulticast_enable,
2845 	.allmulticast_disable = hns3vf_dev_allmulticast_disable,
2846 	.stats_get          = hns3_stats_get,
2847 	.stats_reset        = hns3_stats_reset,
2848 	.xstats_get         = hns3_dev_xstats_get,
2849 	.xstats_get_names   = hns3_dev_xstats_get_names,
2850 	.xstats_reset       = hns3_dev_xstats_reset,
2851 	.xstats_get_by_id   = hns3_dev_xstats_get_by_id,
2852 	.xstats_get_names_by_id = hns3_dev_xstats_get_names_by_id,
2853 	.dev_infos_get      = hns3vf_dev_infos_get,
2854 	.fw_version_get     = hns3vf_fw_version_get,
2855 	.rx_queue_setup     = hns3_rx_queue_setup,
2856 	.tx_queue_setup     = hns3_tx_queue_setup,
2857 	.rx_queue_release   = hns3_dev_rx_queue_release,
2858 	.tx_queue_release   = hns3_dev_tx_queue_release,
2859 	.rx_queue_start     = hns3_dev_rx_queue_start,
2860 	.rx_queue_stop      = hns3_dev_rx_queue_stop,
2861 	.tx_queue_start     = hns3_dev_tx_queue_start,
2862 	.tx_queue_stop      = hns3_dev_tx_queue_stop,
2863 	.rx_queue_intr_enable   = hns3_dev_rx_queue_intr_enable,
2864 	.rx_queue_intr_disable  = hns3_dev_rx_queue_intr_disable,
2865 	.rxq_info_get       = hns3_rxq_info_get,
2866 	.txq_info_get       = hns3_txq_info_get,
2867 	.rx_burst_mode_get  = hns3_rx_burst_mode_get,
2868 	.tx_burst_mode_get  = hns3_tx_burst_mode_get,
2869 	.mac_addr_add       = hns3vf_add_mac_addr,
2870 	.mac_addr_remove    = hns3vf_remove_mac_addr,
2871 	.mac_addr_set       = hns3vf_set_default_mac_addr,
2872 	.set_mc_addr_list   = hns3vf_set_mc_mac_addr_list,
2873 	.link_update        = hns3vf_dev_link_update,
2874 	.rss_hash_update    = hns3_dev_rss_hash_update,
2875 	.rss_hash_conf_get  = hns3_dev_rss_hash_conf_get,
2876 	.reta_update        = hns3_dev_rss_reta_update,
2877 	.reta_query         = hns3_dev_rss_reta_query,
2878 	.flow_ops_get       = hns3_dev_flow_ops_get,
2879 	.vlan_filter_set    = hns3vf_vlan_filter_set,
2880 	.vlan_offload_set   = hns3vf_vlan_offload_set,
2881 	.get_reg            = hns3_get_regs,
2882 	.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
2883 	.tx_done_cleanup    = hns3_tx_done_cleanup,
2884 };
2885 
2886 static const struct hns3_reset_ops hns3vf_reset_ops = {
2887 	.reset_service       = hns3vf_reset_service,
2888 	.stop_service        = hns3vf_stop_service,
2889 	.prepare_reset       = hns3vf_prepare_reset,
2890 	.wait_hardware_ready = hns3vf_wait_hardware_ready,
2891 	.reinit_dev          = hns3vf_reinit_dev,
2892 	.restore_conf        = hns3vf_restore_conf,
2893 	.start_service       = hns3vf_start_service,
2894 };
2895 
2896 static int
2897 hns3vf_dev_init(struct rte_eth_dev *eth_dev)
2898 {
2899 	struct hns3_adapter *hns = eth_dev->data->dev_private;
2900 	struct hns3_hw *hw = &hns->hw;
2901 	int ret;
2902 
2903 	PMD_INIT_FUNC_TRACE();
2904 
2905 	eth_dev->process_private = (struct hns3_process_private *)
2906 	    rte_zmalloc_socket("hns3_filter_list",
2907 			       sizeof(struct hns3_process_private),
2908 			       RTE_CACHE_LINE_SIZE, eth_dev->device->numa_node);
2909 	if (eth_dev->process_private == NULL) {
2910 		PMD_INIT_LOG(ERR, "Failed to alloc memory for process private");
2911 		return -ENOMEM;
2912 	}
2913 
2914 	hns3_flow_init(eth_dev);
2915 
2916 	hns3_set_rxtx_function(eth_dev);
2917 	eth_dev->dev_ops = &hns3vf_eth_dev_ops;
2918 	eth_dev->rx_queue_count = hns3_rx_queue_count;
2919 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
2920 		ret = hns3_mp_init_secondary();
2921 		if (ret) {
2922 			PMD_INIT_LOG(ERR, "Failed to init for secondary "
2923 					  "process, ret = %d", ret);
2924 			goto err_mp_init_secondary;
2925 		}
2926 
2927 		hw->secondary_cnt++;
2928 		return 0;
2929 	}
2930 
2931 	ret = hns3_mp_init_primary();
2932 	if (ret) {
2933 		PMD_INIT_LOG(ERR,
2934 			     "Failed to init for primary process, ret = %d",
2935 			     ret);
2936 		goto err_mp_init_primary;
2937 	}
2938 
2939 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
2940 	hns->is_vf = true;
2941 	hw->data = eth_dev->data;
2942 	hns3_parse_devargs(eth_dev);
2943 
2944 	ret = hns3_reset_init(hw);
2945 	if (ret)
2946 		goto err_init_reset;
2947 	hw->reset.ops = &hns3vf_reset_ops;
2948 
2949 	ret = hns3vf_init_vf(eth_dev);
2950 	if (ret) {
2951 		PMD_INIT_LOG(ERR, "Failed to init vf: %d", ret);
2952 		goto err_init_vf;
2953 	}
2954 
2955 	/* Allocate memory for storing MAC addresses */
2956 	eth_dev->data->mac_addrs = rte_zmalloc("hns3vf-mac",
2957 					       sizeof(struct rte_ether_addr) *
2958 					       HNS3_VF_UC_MACADDR_NUM, 0);
2959 	if (eth_dev->data->mac_addrs == NULL) {
2960 		PMD_INIT_LOG(ERR, "Failed to allocate %zx bytes needed "
2961 			     "to store MAC addresses",
2962 			     sizeof(struct rte_ether_addr) *
2963 			     HNS3_VF_UC_MACADDR_NUM);
2964 		ret = -ENOMEM;
2965 		goto err_rte_zmalloc;
2966 	}
2967 
2968 	/*
2969 	 * The hns3 PF ethdev driver in kernel support setting VF MAC address
2970 	 * on the host by "ip link set ..." command. To avoid some incorrect
2971 	 * scenes, for example, hns3 VF PMD driver fails to receive and send
2972 	 * packets after user configure the MAC address by using the
2973 	 * "ip link set ..." command, hns3 VF PMD driver keep the same MAC
2974 	 * address strategy as the hns3 kernel ethdev driver in the
2975 	 * initialization. If user configure a MAC address by the ip command
2976 	 * for VF device, then hns3 VF PMD driver will start with it, otherwise
2977 	 * start with a random MAC address in the initialization.
2978 	 */
2979 	if (rte_is_zero_ether_addr((struct rte_ether_addr *)hw->mac.mac_addr))
2980 		rte_eth_random_addr(hw->mac.mac_addr);
2981 	rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.mac_addr,
2982 			    &eth_dev->data->mac_addrs[0]);
2983 
2984 	hw->adapter_state = HNS3_NIC_INITIALIZED;
2985 
2986 	if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
2987 			    SCHEDULE_PENDING) {
2988 		hns3_err(hw, "Reschedule reset service after dev_init");
2989 		hns3_schedule_reset(hns);
2990 	} else {
2991 		/* IMP will wait ready flag before reset */
2992 		hns3_notify_reset_ready(hw, false);
2993 	}
2994 	rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
2995 			  eth_dev);
2996 	return 0;
2997 
2998 err_rte_zmalloc:
2999 	hns3vf_uninit_vf(eth_dev);
3000 
3001 err_init_vf:
3002 	rte_free(hw->reset.wait_data);
3003 
3004 err_init_reset:
3005 	hns3_mp_uninit_primary();
3006 
3007 err_mp_init_primary:
3008 err_mp_init_secondary:
3009 	eth_dev->dev_ops = NULL;
3010 	eth_dev->rx_pkt_burst = NULL;
3011 	eth_dev->rx_descriptor_status = NULL;
3012 	eth_dev->tx_pkt_burst = NULL;
3013 	eth_dev->tx_pkt_prepare = NULL;
3014 	eth_dev->tx_descriptor_status = NULL;
3015 	rte_free(eth_dev->process_private);
3016 	eth_dev->process_private = NULL;
3017 
3018 	return ret;
3019 }
3020 
3021 static int
3022 hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
3023 {
3024 	struct hns3_adapter *hns = eth_dev->data->dev_private;
3025 	struct hns3_hw *hw = &hns->hw;
3026 
3027 	PMD_INIT_FUNC_TRACE();
3028 
3029 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
3030 		rte_free(eth_dev->process_private);
3031 		eth_dev->process_private = NULL;
3032 		return 0;
3033 	}
3034 
3035 	if (hw->adapter_state < HNS3_NIC_CLOSING)
3036 		hns3vf_dev_close(eth_dev);
3037 
3038 	hw->adapter_state = HNS3_NIC_REMOVED;
3039 	return 0;
3040 }
3041 
3042 static int
3043 eth_hns3vf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
3044 		     struct rte_pci_device *pci_dev)
3045 {
3046 	return rte_eth_dev_pci_generic_probe(pci_dev,
3047 					     sizeof(struct hns3_adapter),
3048 					     hns3vf_dev_init);
3049 }
3050 
3051 static int
3052 eth_hns3vf_pci_remove(struct rte_pci_device *pci_dev)
3053 {
3054 	return rte_eth_dev_pci_generic_remove(pci_dev, hns3vf_dev_uninit);
3055 }
3056 
3057 static const struct rte_pci_id pci_id_hns3vf_map[] = {
3058 	{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_VF) },
3059 	{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_RDMA_PFC_VF) },
3060 	{ .vendor_id = 0, }, /* sentinel */
3061 };
3062 
3063 static struct rte_pci_driver rte_hns3vf_pmd = {
3064 	.id_table = pci_id_hns3vf_map,
3065 	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
3066 	.probe = eth_hns3vf_pci_probe,
3067 	.remove = eth_hns3vf_pci_remove,
3068 };
3069 
3070 RTE_PMD_REGISTER_PCI(net_hns3_vf, rte_hns3vf_pmd);
3071 RTE_PMD_REGISTER_PCI_TABLE(net_hns3_vf, pci_id_hns3vf_map);
3072 RTE_PMD_REGISTER_KMOD_DEP(net_hns3_vf, "* igb_uio | vfio-pci");
3073 RTE_PMD_REGISTER_PARAM_STRING(net_hns3_vf,
3074 		HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
3075 		HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "
3076 		HNS3_DEVARG_DEV_CAPS_MASK "=<1-65535> ");
3077