examples/flow_classify: fix failure message

Fixes: bab16ddaf2c1 ("examples/flow_classify: add sample application")
Cc: [email protected]

Signed-off-by: Chuanshe Zhang <[email protected]>

examples/flow_classify: fix failure message

Fixes: bab16ddaf2c1 ("examples/flow_classify: add sample application")
Cc: [email protected]

Signed-off-by: Chuanshe Zhang <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Somnath Kotur <[email protected]>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Huisong Li <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>

show more ...

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: A

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

doc: use code snippets in sample app guides

Currently the sample app user guides use hard coded code snippets,
this patch changes these to use literalinclude which will dynamically
update the snippe

doc: use code snippets in sample app guides

Currently the sample app user guides use hard coded code snippets,
this patch changes these to use literalinclude which will dynamically
update the snippets as changes are made to the code.
This was introduced in commit 413c75c33c40 ("doc: show how to include
code in guides"). Comments within the sample apps were updated to
accommodate this as part of this patch. This will help to ensure that
the code within the sample app user guides is up to date and not out
of sync with the actual code.

Signed-off-by: Conor Fogarty <[email protected]>
Signed-off-by: Conor Walsh <[email protected]>
Acked-by: John McNamara <[email protected]>

show more ...

examples/flow_classify: fix NUMA check of port and core

According to the comments and logging, the author just hope user to use
the core and device which are in the same numa node for optimal
perfor

examples/flow_classify: fix NUMA check of port and core

According to the comments and logging, the author just hope user to use
the core and device which are in the same numa node for optimal
performance. If not, A warning gives out.

For example in flow_classify:
./build/flow_classify -a 0000:7d:00.1 -l 93
Here:
0000:7d:00.1 is on numa node 0.
core 93 is on numa node 3.

The two are not in same numa node, but no warning gives out in old codes
when device is on node 0.
This patch includes the node 0 in the check.

Fixes: bab16ddaf2c1 ("examples/flow_classify: add sample application")
Cc: [email protected]

Signed-off-by: Min Hu (Connor) <[email protected]>
Tested-by: Bernard Iremonger <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new use

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.

Fixes: aec9c13c5257 ("eal: add function to release internal resources")
Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f76 ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a174461 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85badc ("examples/ntb: add example for NTB")
Fixes: b77f66002812 ("examples/pipeline: add new example application")
Fixes: edbed86d1cc3 ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c721 ("examples/vhost_crypto: add sample application")
Cc: [email protected]

Signed-off-by: Chengchang Tang <[email protected]>

show more ...

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

T

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Anatoly Burakov <[email protected]>

show more ...

replace no-return attributes

The new macro __rte_noreturn, for compiler hinting,
is now used where appropriate for consistency.

Signed-off-by: Thomas Monjalon <[email protected]>

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these f

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

examples/flow_classify: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_c

examples/flow_classify: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_classify according to its new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <[email protected]>
Reviewed-by: Olivier Matz <[email protected]>

show more ...

net: add rte prefix to TCP structure

Add 'rte_' prefix to structures:
- rename struct tcp_hdr as struct rte_tcp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemmin

net: add rte prefix to TCP structure

Add 'rte_' prefix to structures:
- rename struct tcp_hdr as struct rte_tcp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
-

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
- rename IPV4_IHL_MULTIPLIER as RTE_IPV4_IHL_MULTIPLIER.
- rename IPV4_HDR_DF_SHIFT as RTE_IPV4_HDR_DF_SHIFT.
- rename IPV4_HDR_MF_SHIFT as RTE_IPV4_HDR_MF_SHIFT.
- rename IPV4_HDR_FO_SHIFT as RTE_IPV4_HDR_FO_SHIFT.
- rename IPV4_HDR_DF_FLAG as RTE_IPV4_HDR_DF_FLAG.
- rename IPV4_HDR_MF_FLAG as RTE_IPV4_HDR_MF_FLAG.
- rename IPV4_HDR_OFFSET_MASK as RTE_IPV4_HDR_OFFSET_MASK.
- rename IPV4_HDR_OFFSET_UNITS as RTE_IPV4_HDR_OFFSET_UNITS.
- rename IPV4_ANY as RTE_IPV4_ANY.
- rename IPV4_LOOPBACK as RTE_IPV4_LOOPBACK.
- rename IPV4_BROADCAST as RTE_IPV4_BROADCAST.
- rename IPV4_ALLHOSTS_GROUP as RTE_IPV4_ALLHOSTS_GROUP.
- rename IPV4_ALLRTRS_GROUP as RTE_IPV4_ALLRTRS_GROUP.
- rename IPV4_MAX_LOCAL_GROUP as RTE_IPV4_MAX_LOCAL_GROUP.
- rename IPV4_MIN_MCAST as RTE_IPV4_MIN_MCAST.
- rename IPV4_MAX_MCAST as RTE_IPV4_MAX_MCAST.
- rename IS_IPV4_MCAST as RTE_IS_IPV4_MCAST.
- rename IPV6_HDR_FL_SHIFT as RTE_IPV6_HDR_FL_SHIFT.
- rename IPV6_HDR_TC_SHIFT as RTE_IPV6_HDR_TC_SHIFT.
- rename IPV6_HDR_FL_MASK as RTE_IPV6_HDR_FL_MASK.
- rename IPV6_HDR_TC_MASK as RTE_IPV6_HDR_TC_MASK.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

ethdev: remove old offload API

In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue

ethdev: remove old offload API

In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload

For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.

The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE

The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*

Signed-off-by: Ferruh Yigit <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Shahaf Shuler <[email protected]>

show more ...

examples/flow_classify: fix validation in port init

The port_init function calls the rte_eth_dev_is_valid_port function.
This function now returns 1 if the port state is attached.
A return value of

examples/flow_classify: fix validation in port init

The port_init function calls the rte_eth_dev_is_valid_port function.
This function now returns 1 if the port state is attached.
A return value of 1 now means a valid port.

Fixes: a9dbe1802226 ("fix ethdev port id validation")

Signed-off-by: Bernard Iremonger <[email protected]>

show more ...

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the applica

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.

Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

fix ethdev port id validation

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Su

fix ethdev port id validation

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application assume a valid port index is in the range [0..count[.

There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid

Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.

Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

fix ethdev ports enumeration

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Suc

fix ethdev ports enumeration

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application

Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.

Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

examples: increase default ring sizes to 1024

Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)

Signed-off-by: Kevin Laatz <kevin.laat

examples: increase default ring sizes to 1024

Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)

Signed-off-by: Kevin Laatz <[email protected]>
Acked-by: Bruce Richardson <[email protected]>
Acked-by: Adrien Mazarguil <[email protected]>

show more ...

examples/flow_classify: convert to new ethdev offloads API

Ethdev offloads API has changed since:

commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: intro

examples/flow_classify: convert to new ethdev offloads API

Ethdev offloads API has changed since:

commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")

This commit support the new API.

Signed-off-by: Shahaf Shuler <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...