Relax panics in async/futures to traps/errors (#12688)

* Relax panics in async/futures to traps/errors

This commit is an admittance that I don't believe we're going to get
to a point where we are c

Relax panics in async/futures to traps/errors (#12688)

* Relax panics in async/futures to traps/errors

This commit is an admittance that I don't believe we're going to get
to a point where we are confident enough in the fuzzing of
component-model-async such that we could confidently say we're
exercising the vast majority of possible panics. Development of
component-model-async has shown a steady trickle of panics over the
course of the development of the feature, and this trend has been
persistent over time as well.

An attempt was made in #12119 to add a fuzzer dedicated to async events
but that didn't actually find anything in development and it has missed
a number of panics present before and discovered after its introduction.
Overall I do not know how to improve the fuzzer to the point that it
would find pretty much all of the existing async-related panics over
time.

To help address this concern of the `concurrent.rs` implementation this
commit goes through and replaces things like `unwrap()`, `assert!`,
`panic!`, and `unreachable!` with an error-producing form. The benefit
of this is that a bug in the implementation is less likely to result in
a panic and instead just results in a non-spec-compliant trap. The
downside of doing this though is that it can become unclear what errors
are "first class traps", or expected to be guest reachable, and which
are expected to be bugs in Wasmtime. To help address this I've performed
a few refactorings here as well.

* Some traps previously present as error strings are now promoted to
using `Trap::Foo` instead. This has some refactoring of the Rust/C
side as well to make it easier to define new variants. Tests were
additionally added for any trap messages that weren't previously
tested as being reachable.

* A new `bail_bug!` macro was added (internally) for Wasmtime. This is
coupled with a concrete `WasmtimeBug` error type (exported as
`wasmtime::WasmtimeBug`). The intention is that `bail!` continues to
be "here's a string and I'm a bit too lazy to make a concrete error"
while `bail_bug!` indicates "this is a bug in wasmtime please report
this if you see it".

The rough vision is that if an error condition is reached, and the system
is not broken in such a way that panicking is required, then `bail_bug!`
can be used to indicate a bug in Wasmtime as opposed to panicking. This
reduces the real-world impact of hitting these scenarios by downgrading a
CVE-worthy `panic!` into a bug-worthy non-spec-compliant trap. Not all
panics are able to be transitioned to this as some are load bearing from
a safety perspective or similar (or indicate something equally broken),
but the vast majority of cases are suitable for "return a trap, lock
down the store, and let destructors take care of everything else".

This change additionally has resulted in API changes for `FutureReader`
and `StreamReader`. For example creation of these types now returns a
`Result` for when the `ResourceTable` is full, for example, instead of
panicking.

* Fix CI build

* Translate `WasmtimeBug` to panics in debug mode

* Review comments

* Refactor some stream methods for fewer panics

show more ...

chore: bump to wasi 0.3.0-rc-2026-02-09 (#12557)

Remove need for explicit `Config::async_support` knob (#12371)

* Refactor component model host function definitions

Push the `async`-ness down one layer.

* Remove need for explicit `Config::async

Remove need for explicit `Config::async_support` knob (#12371)

* Refactor component model host function definitions

Push the `async`-ness down one layer.

* Remove need for explicit `Config::async_support` knob

This commit is an attempt to step towards reconciling "old async" and
"new async" in Wasmtime. The old async style is the original async
support in Wasmtime with `call_async`, `func_wrap_async`, etc, where the
main property is that the store is "locked" during an async operation.
Put another way, a store can only execute at most one async operation at
a time. This is in contrast to "new async" support in Wasmtime with the
component-model-async (WASIp3) support, where stores can have more than
one async operation in flight at once.

This commit does not fully reconcile these differences, but it does
remove one hurdle along the way: `Config::async_support`. Since the
beginning of Wasmtime this configuration knob has existed to explicitly
demarcate a config/engine/store as "this thing requires `async` stuff
internally." This has started to make less and less sense over time
where the line between sync and async has become more murky with WASIp3
where the two worlds comingle. The goal of this commit is to deprecate
`Config::async_support` and make the function not actually do anything.

In isolation this can't simply be done, however, because there are many
load-bearing aspects of Wasmtime that rely on this `async_support` knob.
For example once epochs + yielding are enabled it's required that all
Wasm is executed on a fiber lest it hit an epoch and not know how to
yield. That means that this commit is not a simple removal of
`async_support` but instead a refactoring/rearchitecting of how async is
used internally within Wasmtime. The high-level ideas within Wasmtime
now are:

* A `Store` has a "requires async" boolean stored within it.
* All configuration options which end up requiring async, such as
yielding with epochs, turn this boolean on.
* Creation of host functions which use async
(e.g. `func_wrap_{async,concurrent}`) will also turn this option on.
* Synchronous API entrypoints into Wasmtime ensure that this boolean is
disabled.
* Asynchronous APIs are usable at any time.

This means that the concept of an async store vs a sync store is now
gone. All stores are equally capable of executing sync/async, and the
change now is that dynamically some stores will require that async is
used with certain configuration. Additionally all panicking conditions
around `async_support` have been converted to errors instead. All
relevant APIs already returned an error and things are murky enough now
that it's not necessarily trivial to get this right at the embedder
level. In the interest of avoiding panics all detected async mismatches
are now first-class `wasmtime::Error` values.

The end result of this commit is that `Config::async_support` is a
deprecated `#[doc(hidden)]` function that does nothing. While many
internal changes happened as well as having new tests for all this sort
of behavior this is not expected to have a great impact on external
consumers. In general a deletion of `async_support(true)` is in theory
all that's required. This is intended to make it easier to think about
async/sync/etc in the future with WASIp3 and eventually reconcile
`func_wrap_async` and `func_wrap_concurrent` for example. That's left
for future refactorings however.

prtest:full

* Review comments

* Fix CI failures

show more ...

Migrate `wasmtime-wasi` to `wasmtime::error` (#12294)

* Migrate wiggle and wiggle generate to `wasmtime::error`

* Fix testing `wiggle` and `wiggle-test` in isolation

When doing plain old `cargo te

Migrate `wasmtime-wasi` to `wasmtime::error` (#12294)

* Migrate wiggle and wiggle generate to `wasmtime::error`

* Fix testing `wiggle` and `wiggle-test` in isolation

When doing plain old `cargo test -p wiggle` (or `wiggle-test`) the test would
fail due to linking errors because Wasmtime's `std` cargo feature (and maybe
others) wasn't being enabled. The crate's tests would pass when run as part of
the whole workspace, however, because of cargo feature resolution and other
crates that enabled the necessary features, which is why CI is green.

* Remove direct anyhow dependency in wiggle-test

* Migrate wasi-nn to `wasmtime::error`

* Migrate wasi-keyvalue to `wasmtime::error`

* Migrate wasi-io to `wasmtime::error`

* Migrate wasi-http to `wasmtime::error`

* Migrate wasi-config to `wasmtime::error`

* Migrate wasi-common to `wastime::error`

This is another interesting one because wasi-common is used internally to
Wasmtime but also by other projects. Therefore, rather than using
`wastime::error::*` and making `wasmtime` a hard dependency, we use just
`wasmtime_environ::error`.

* cargo fmt

* Migrate wasmtime-wasi to `wasmtime::error`

show more ...