1 //! Contains the common Wasmtime command line interface (CLI) flags. 2 3 use clap::Parser; 4 use serde::Deserialize; 5 use std::{ 6 fmt, fs, 7 path::{Path, PathBuf}, 8 time::Duration, 9 }; 10 use wasmtime::{Config, Result, bail, error::Context as _}; 11 12 pub mod opt; 13 14 #[cfg(feature = "logging")] 15 fn init_file_per_thread_logger(prefix: &'static str) { 16 file_per_thread_logger::initialize(prefix); 17 file_per_thread_logger::allow_uninitialized(); 18 19 // Extending behavior of default spawner: 20 // https://docs.rs/rayon/1.1.0/rayon/struct.ThreadPoolBuilder.html#method.spawn_handler 21 // Source code says DefaultSpawner is implementation detail and 22 // shouldn't be used directly. 23 #[cfg(feature = "parallel-compilation")] 24 rayon::ThreadPoolBuilder::new() 25 .spawn_handler(move |thread| { 26 let mut b = std::thread::Builder::new(); 27 if let Some(name) = thread.name() { 28 b = b.name(name.to_owned()); 29 } 30 if let Some(stack_size) = thread.stack_size() { 31 b = b.stack_size(stack_size); 32 } 33 b.spawn(move || { 34 file_per_thread_logger::initialize(prefix); 35 thread.run() 36 })?; 37 Ok(()) 38 }) 39 .build_global() 40 .unwrap(); 41 } 42 43 wasmtime_option_group! { 44 #[derive(PartialEq, Clone, Deserialize)] 45 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 46 pub struct OptimizeOptions { 47 /// Optimization level of generated code (0-2, s; default: 2) 48 #[serde(default)] 49 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 50 pub opt_level: Option<wasmtime::OptLevel>, 51 52 /// Register allocator algorithm choice. 53 #[serde(default)] 54 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 55 pub regalloc_algorithm: Option<wasmtime::RegallocAlgorithm>, 56 57 /// Do not allow Wasm linear memories to move in the host process's 58 /// address space. 59 pub memory_may_move: Option<bool>, 60 61 /// Initial virtual memory allocation size for memories. 62 pub memory_reservation: Option<u64>, 63 64 /// Bytes to reserve at the end of linear memory for growth into. 65 pub memory_reservation_for_growth: Option<u64>, 66 67 /// Size, in bytes, of guard pages for linear memories. 68 pub memory_guard_size: Option<u64>, 69 70 /// Indicates whether an unmapped region of memory is placed before all 71 /// linear memories. 72 pub guard_before_linear_memory: Option<bool>, 73 74 /// Whether to initialize tables lazily, so that instantiation is 75 /// fast but indirect calls are a little slower. If no, tables are 76 /// initialized eagerly from any active element segments that apply to 77 /// them during instantiation. (default: yes) 78 pub table_lazy_init: Option<bool>, 79 80 /// Enable the pooling allocator, in place of the on-demand allocator. 81 pub pooling_allocator: Option<bool>, 82 83 /// The number of decommits to do per batch. A batch size of 1 84 /// effectively disables decommit batching. (default: 1) 85 pub pooling_decommit_batch_size: Option<usize>, 86 87 /// How many bytes to keep resident between instantiations for the 88 /// pooling allocator in linear memories. 89 pub pooling_memory_keep_resident: Option<usize>, 90 91 /// How many bytes to keep resident between instantiations for the 92 /// pooling allocator in tables. 93 pub pooling_table_keep_resident: Option<usize>, 94 95 /// Enable memory protection keys for the pooling allocator; this can 96 /// optimize the size of memory slots. 97 #[serde(default)] 98 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 99 pub pooling_memory_protection_keys: Option<wasmtime::Enabled>, 100 101 /// Sets an upper limit on how many memory protection keys (MPK) Wasmtime 102 /// will use. (default: 16) 103 pub pooling_max_memory_protection_keys: Option<usize>, 104 105 /// Configure attempting to initialize linear memory via a 106 /// copy-on-write mapping (default: yes) 107 pub memory_init_cow: Option<bool>, 108 109 /// Threshold below which CoW images are guaranteed to be used and be 110 /// dense. 111 pub memory_guaranteed_dense_image_size: Option<u64>, 112 113 /// The maximum number of WebAssembly instances which can be created 114 /// with the pooling allocator. 115 pub pooling_total_core_instances: Option<u32>, 116 117 /// The maximum number of WebAssembly components which can be created 118 /// with the pooling allocator. 119 pub pooling_total_component_instances: Option<u32>, 120 121 /// The maximum number of WebAssembly memories which can be created with 122 /// the pooling allocator. 123 pub pooling_total_memories: Option<u32>, 124 125 /// The maximum number of WebAssembly tables which can be created with 126 /// the pooling allocator. 127 pub pooling_total_tables: Option<u32>, 128 129 /// The maximum number of WebAssembly stacks which can be created with 130 /// the pooling allocator. 131 pub pooling_total_stacks: Option<u32>, 132 133 /// The maximum runtime size of each linear memory in the pooling 134 /// allocator, in bytes. 135 pub pooling_max_memory_size: Option<usize>, 136 137 /// The maximum table elements for any table defined in a module when 138 /// using the pooling allocator. 139 pub pooling_table_elements: Option<usize>, 140 141 /// The maximum size, in bytes, allocated for a core instance's metadata 142 /// when using the pooling allocator. 143 pub pooling_max_core_instance_size: Option<usize>, 144 145 /// Configures the maximum number of "unused warm slots" to retain in the 146 /// pooling allocator. (default: 100) 147 pub pooling_max_unused_warm_slots: Option<u32>, 148 149 /// How much memory, in bytes, to keep resident for async stacks allocated 150 /// with the pooling allocator. (default: 0) 151 pub pooling_async_stack_keep_resident: Option<usize>, 152 153 /// The maximum size, in bytes, allocated for a component instance's 154 /// `VMComponentContext` metadata. (default: 1MiB) 155 pub pooling_max_component_instance_size: Option<usize>, 156 157 /// The maximum number of core instances a single component may contain 158 /// (default is unlimited). 159 pub pooling_max_core_instances_per_component: Option<u32>, 160 161 /// The maximum number of Wasm linear memories that a single component may 162 /// transitively contain (default is unlimited). 163 pub pooling_max_memories_per_component: Option<u32>, 164 165 /// The maximum number of tables that a single component may transitively 166 /// contain (default is unlimited). 167 pub pooling_max_tables_per_component: Option<u32>, 168 169 /// The maximum number of defined tables for a core module. (default: 1) 170 pub pooling_max_tables_per_module: Option<u32>, 171 172 /// The maximum number of defined linear memories for a module. (default: 1) 173 pub pooling_max_memories_per_module: Option<u32>, 174 175 /// The maximum number of concurrent GC heaps supported. (default: 1000) 176 pub pooling_total_gc_heaps: Option<u32>, 177 178 /// Enable or disable the use of host signal handlers for traps. 179 pub signals_based_traps: Option<bool>, 180 181 /// DEPRECATED: Use `-Cmemory-guard-size=N` instead. 182 pub dynamic_memory_guard_size: Option<u64>, 183 184 /// DEPRECATED: Use `-Cmemory-guard-size=N` instead. 185 pub static_memory_guard_size: Option<u64>, 186 187 /// DEPRECATED: Use `-Cmemory-may-move` instead. 188 pub static_memory_forced: Option<bool>, 189 190 /// DEPRECATED: Use `-Cmemory-reservation=N` instead. 191 pub static_memory_maximum_size: Option<u64>, 192 193 /// DEPRECATED: Use `-Cmemory-reservation-for-growth=N` instead. 194 pub dynamic_memory_reserved_for_growth: Option<u64>, 195 196 /// Whether or not `PAGEMAP_SCAN` ioctls are used to reset linear 197 /// memory. 198 #[serde(default)] 199 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 200 pub pooling_pagemap_scan: Option<wasmtime::Enabled>, 201 } 202 203 enum Optimize { 204 ... 205 } 206 } 207 208 wasmtime_option_group! { 209 #[derive(PartialEq, Clone, Deserialize)] 210 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 211 pub struct CodegenOptions { 212 /// Either `cranelift` or `winch`. 213 /// 214 /// Currently only `cranelift` and `winch` are supported, but not all 215 /// builds of Wasmtime have both built in. 216 #[serde(default)] 217 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 218 pub compiler: Option<wasmtime::Strategy>, 219 /// Which garbage collector to use: `drc` or `null`. 220 /// 221 /// `drc` is the deferred reference-counting collector. 222 /// 223 /// `null` is the null garbage collector, which does not collect any 224 /// garbage. 225 /// 226 /// Note that not all builds of Wasmtime will have support for garbage 227 /// collection included. 228 #[serde(default)] 229 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 230 pub collector: Option<wasmtime::Collector>, 231 /// Enable Cranelift's internal debug verifier (expensive) 232 pub cranelift_debug_verifier: Option<bool>, 233 /// Whether or not to enable caching of compiled modules. 234 pub cache: Option<bool>, 235 /// Configuration for compiled module caching. 236 pub cache_config: Option<String>, 237 /// Whether or not to enable parallel compilation of modules. 238 pub parallel_compilation: Option<bool>, 239 /// Whether to enable proof-carrying code (PCC)-based validation. 240 pub pcc: Option<bool>, 241 /// Controls whether native unwind information is present in compiled 242 /// object files. 243 pub native_unwind_info: Option<bool>, 244 245 /// Whether to perform function inlining during compilation. 246 pub inlining: Option<bool>, 247 248 #[prefixed = "cranelift"] 249 #[serde(default)] 250 /// Set a cranelift-specific option. Use `wasmtime settings` to see 251 /// all. 252 pub cranelift: Vec<(String, Option<String>)>, 253 } 254 255 enum Codegen { 256 ... 257 } 258 } 259 260 wasmtime_option_group! { 261 #[derive(PartialEq, Clone, Deserialize)] 262 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 263 pub struct DebugOptions { 264 /// Enable generation of DWARF debug information in compiled code. 265 pub debug_info: Option<bool>, 266 /// Enable guest debugging insrumentation. 267 pub guest_debug: Option<bool>, 268 /// Configure whether compiled code can map native addresses to wasm. 269 pub address_map: Option<bool>, 270 /// Configure whether logging is enabled. 271 pub logging: Option<bool>, 272 /// Configure whether logs are emitted to files 273 pub log_to_files: Option<bool>, 274 /// Enable coredump generation to this file after a WebAssembly trap. 275 pub coredump: Option<String>, 276 } 277 278 enum Debug { 279 ... 280 } 281 } 282 283 wasmtime_option_group! { 284 #[derive(PartialEq, Clone, Deserialize)] 285 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 286 pub struct WasmOptions { 287 /// Enable canonicalization of all NaN values. 288 pub nan_canonicalization: Option<bool>, 289 /// Enable execution fuel with N units fuel, trapping after running out 290 /// of fuel. 291 /// 292 /// Most WebAssembly instructions consume 1 unit of fuel. Some 293 /// instructions, such as `nop`, `drop`, `block`, and `loop`, consume 0 294 /// units, as any execution cost associated with them involves other 295 /// instructions which do consume fuel. 296 pub fuel: Option<u64>, 297 /// Yield when a global epoch counter changes, allowing for async 298 /// operation without blocking the executor. 299 pub epoch_interruption: Option<bool>, 300 /// Maximum stack size, in bytes, that wasm is allowed to consume before a 301 /// stack overflow is reported. 302 pub max_wasm_stack: Option<usize>, 303 /// Stack size, in bytes, that will be allocated for async stacks. 304 /// 305 /// Note that this must be larger than `max-wasm-stack` and the 306 /// difference between the two is how much stack the host has to execute 307 /// on. 308 pub async_stack_size: Option<usize>, 309 /// Configures whether or not stacks used for async futures are zeroed 310 /// before (re)use as a defense-in-depth mechanism. (default: false) 311 pub async_stack_zeroing: Option<bool>, 312 /// Allow unknown exports when running commands. 313 pub unknown_exports_allow: Option<bool>, 314 /// Allow the main module to import unknown functions, using an 315 /// implementation that immediately traps, when running commands. 316 pub unknown_imports_trap: Option<bool>, 317 /// Allow the main module to import unknown functions, using an 318 /// implementation that returns default values, when running commands. 319 pub unknown_imports_default: Option<bool>, 320 /// Enables memory error checking. (see wmemcheck.md for more info) 321 pub wmemcheck: Option<bool>, 322 /// Maximum size, in bytes, that a linear memory is allowed to reach. 323 /// 324 /// Growth beyond this limit will cause `memory.grow` instructions in 325 /// WebAssembly modules to return -1 and fail. 326 pub max_memory_size: Option<usize>, 327 /// Maximum size, in table elements, that a table is allowed to reach. 328 pub max_table_elements: Option<usize>, 329 /// Maximum number of WebAssembly instances allowed to be created. 330 pub max_instances: Option<usize>, 331 /// Maximum number of WebAssembly tables allowed to be created. 332 pub max_tables: Option<usize>, 333 /// Maximum number of WebAssembly linear memories allowed to be created. 334 pub max_memories: Option<usize>, 335 /// Force a trap to be raised on `memory.grow` and `table.grow` failure 336 /// instead of returning -1 from these instructions. 337 /// 338 /// This is not necessarily a spec-compliant option to enable but can be 339 /// useful for tracking down a backtrace of what is requesting so much 340 /// memory, for example. 341 pub trap_on_grow_failure: Option<bool>, 342 /// Maximum execution time of wasm code before timing out (1, 2s, 100ms, etc) 343 pub timeout: Option<Duration>, 344 /// Configures support for all WebAssembly proposals implemented. 345 pub all_proposals: Option<bool>, 346 /// Configure support for the bulk memory proposal. 347 pub bulk_memory: Option<bool>, 348 /// Configure support for the multi-memory proposal. 349 pub multi_memory: Option<bool>, 350 /// Configure support for the multi-value proposal. 351 pub multi_value: Option<bool>, 352 /// Configure support for the reference-types proposal. 353 pub reference_types: Option<bool>, 354 /// Configure support for the simd proposal. 355 pub simd: Option<bool>, 356 /// Configure support for the relaxed-simd proposal. 357 pub relaxed_simd: Option<bool>, 358 /// Configure forcing deterministic and host-independent behavior of 359 /// the relaxed-simd instructions. 360 /// 361 /// By default these instructions may have architecture-specific behavior as 362 /// allowed by the specification, but this can be used to force the behavior 363 /// of these instructions to match the deterministic behavior classified in 364 /// the specification. Note that enabling this option may come at a 365 /// performance cost. 366 pub relaxed_simd_deterministic: Option<bool>, 367 /// Configure support for the tail-call proposal. 368 pub tail_call: Option<bool>, 369 /// Configure support for the threads proposal. 370 pub threads: Option<bool>, 371 /// Configure the ability to create a `shared` memory. 372 pub shared_memory: Option<bool>, 373 /// Configure support for the shared-everything-threads proposal. 374 pub shared_everything_threads: Option<bool>, 375 /// Configure support for the memory64 proposal. 376 pub memory64: Option<bool>, 377 /// Configure support for the component-model proposal. 378 pub component_model: Option<bool>, 379 /// Component model support for async lifting/lowering. 380 pub component_model_async: Option<bool>, 381 /// Component model support for async lifting/lowering: this corresponds 382 /// to the �� emoji in the component model specification. 383 pub component_model_async_builtins: Option<bool>, 384 /// Component model support for async lifting/lowering: this corresponds 385 /// to the �� emoji in the component model specification. 386 pub component_model_async_stackful: Option<bool>, 387 /// Component model support for threading: this corresponds 388 /// to the �� emoji in the component model specification. 389 pub component_model_threading: Option<bool>, 390 /// Component model support for `error-context`: this corresponds 391 /// to the �� emoji in the component model specification. 392 pub component_model_error_context: Option<bool>, 393 /// GC support in the component model: this corresponds to the �� emoji 394 /// in the component model specification. 395 pub component_model_gc: Option<bool>, 396 /// Configure support for the function-references proposal. 397 pub function_references: Option<bool>, 398 /// Configure support for the stack-switching proposal. 399 pub stack_switching: Option<bool>, 400 /// Configure support for the GC proposal. 401 pub gc: Option<bool>, 402 /// Configure support for the custom-page-sizes proposal. 403 pub custom_page_sizes: Option<bool>, 404 /// Configure support for the wide-arithmetic proposal. 405 pub wide_arithmetic: Option<bool>, 406 /// Configure support for the extended-const proposal. 407 pub extended_const: Option<bool>, 408 /// Configure support for the exceptions proposal. 409 pub exceptions: Option<bool>, 410 /// Whether or not any GC infrastructure in Wasmtime is enabled or not. 411 pub gc_support: Option<bool>, 412 /// Component model support for fixed-length lists: this corresponds 413 /// to the �� emoji in the component model specification 414 pub component_model_fixed_length_lists: Option<bool>, 415 /// Whether or not any concurrency infrastructure in Wasmtime is 416 /// enabled or not. 417 pub concurrency_support: Option<bool>, 418 } 419 420 enum Wasm { 421 ... 422 } 423 } 424 425 wasmtime_option_group! { 426 #[derive(PartialEq, Clone, Deserialize)] 427 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 428 pub struct WasiOptions { 429 /// Enable support for WASI CLI APIs, including filesystems, sockets, clocks, and random. 430 pub cli: Option<bool>, 431 /// Enable WASI APIs marked as: @unstable(feature = cli-exit-with-code) 432 pub cli_exit_with_code: Option<bool>, 433 /// Deprecated alias for `cli` 434 pub common: Option<bool>, 435 /// Enable support for WASI neural network imports (experimental) 436 pub nn: Option<bool>, 437 /// Enable support for WASI threading imports (experimental). Implies preview2=false. 438 pub threads: Option<bool>, 439 /// Enable support for WASI HTTP imports 440 pub http: Option<bool>, 441 /// Number of distinct write calls to the outgoing body's output-stream 442 /// that the implementation will buffer. 443 /// Default: 1. 444 pub http_outgoing_body_buffer_chunks: Option<usize>, 445 /// Maximum size allowed in a write call to the outgoing body's output-stream. 446 /// Default: 1024 * 1024. 447 pub http_outgoing_body_chunk_size: Option<usize>, 448 /// Enable support for WASI config imports (experimental) 449 pub config: Option<bool>, 450 /// Enable support for WASI key-value imports (experimental) 451 pub keyvalue: Option<bool>, 452 /// Inherit environment variables and file descriptors following the 453 /// systemd listen fd specification (UNIX only) (legacy wasip1 454 /// implementation only) 455 pub listenfd: Option<bool>, 456 /// Grant access to the given TCP listen socket (experimental, legacy 457 /// wasip1 implementation only) 458 #[serde(default)] 459 pub tcplisten: Vec<String>, 460 /// Enable support for WASI TLS (Transport Layer Security) imports (experimental) 461 pub tls: Option<bool>, 462 /// Implement WASI Preview1 using new Preview2 implementation (true, default) or legacy 463 /// implementation (false) 464 pub preview2: Option<bool>, 465 /// Pre-load machine learning graphs (i.e., models) for use by wasi-nn. 466 /// 467 /// Each use of the flag will preload a ML model from the host directory 468 /// using the given model encoding. The model will be mapped to the 469 /// directory name: e.g., `--wasi-nn-graph openvino:/foo/bar` will preload 470 /// an OpenVINO model named `bar`. Note that which model encodings are 471 /// available is dependent on the backends implemented in the 472 /// `wasmtime_wasi_nn` crate. 473 #[serde(skip)] 474 pub nn_graph: Vec<WasiNnGraph>, 475 /// Flag for WASI preview2 to inherit the host's network within the 476 /// guest so it has full access to all addresses/ports/etc. 477 pub inherit_network: Option<bool>, 478 /// Indicates whether `wasi:sockets/ip-name-lookup` is enabled or not. 479 pub allow_ip_name_lookup: Option<bool>, 480 /// Indicates whether `wasi:sockets` TCP support is enabled or not. 481 pub tcp: Option<bool>, 482 /// Indicates whether `wasi:sockets` UDP support is enabled or not. 483 pub udp: Option<bool>, 484 /// Enable WASI APIs marked as: @unstable(feature = network-error-code) 485 pub network_error_code: Option<bool>, 486 /// Allows imports from the `wasi_unstable` core wasm module. 487 pub preview0: Option<bool>, 488 /// Inherit all environment variables from the parent process. 489 /// 490 /// This option can be further overwritten with `--env` flags. 491 pub inherit_env: Option<bool>, 492 /// Pass a wasi config variable to the program. 493 #[serde(skip)] 494 pub config_var: Vec<KeyValuePair>, 495 /// Preset data for the In-Memory provider of WASI key-value API. 496 #[serde(skip)] 497 pub keyvalue_in_memory_data: Vec<KeyValuePair>, 498 /// Enable support for WASIp3 APIs. 499 pub p3: Option<bool>, 500 } 501 502 enum Wasi { 503 ... 504 } 505 } 506 507 wasmtime_option_group! { 508 #[derive(PartialEq, Clone, Deserialize)] 509 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 510 pub struct RecordOptions { 511 /// Filename for the recorded execution trace (or empty string to skip writing a file). 512 pub path: Option<String>, 513 /// Include (optional) signatures to facilitate validation checks during replay 514 /// (see `wasmtime replay` for details). 515 pub validation_metadata: Option<bool>, 516 /// Window size of internal buffering for record events (large windows offer more opportunities 517 /// for coalescing events at the cost of memory usage). 518 pub event_window_size: Option<usize>, 519 } 520 521 enum Record { 522 ... 523 } 524 } 525 526 #[derive(Debug, Clone, PartialEq)] 527 pub struct WasiNnGraph { 528 pub format: String, 529 pub dir: String, 530 } 531 532 #[derive(Debug, Clone, PartialEq)] 533 pub struct KeyValuePair { 534 pub key: String, 535 pub value: String, 536 } 537 538 /// Common options for commands that translate WebAssembly modules 539 #[derive(Parser, Clone, Deserialize)] 540 #[serde(deny_unknown_fields)] 541 pub struct CommonOptions { 542 // These options groups are used to parse `-O` and such options but aren't 543 // the raw form consumed by the CLI. Instead they're pushed into the `pub` 544 // fields below as part of the `configure` method. 545 // 546 // Ideally clap would support `pub opts: OptimizeOptions` and parse directly 547 // into that but it does not appear to do so for multiple `-O` flags for 548 // now. 549 /// Optimization and tuning related options for wasm performance, `-O help` to 550 /// see all. 551 #[arg(short = 'O', long = "optimize", value_name = "KEY[=VAL[,..]]")] 552 #[serde(skip)] 553 opts_raw: Vec<opt::CommaSeparated<Optimize>>, 554 555 /// Codegen-related configuration options, `-C help` to see all. 556 #[arg(short = 'C', long = "codegen", value_name = "KEY[=VAL[,..]]")] 557 #[serde(skip)] 558 codegen_raw: Vec<opt::CommaSeparated<Codegen>>, 559 560 /// Debug-related configuration options, `-D help` to see all. 561 #[arg(short = 'D', long = "debug", value_name = "KEY[=VAL[,..]]")] 562 #[serde(skip)] 563 debug_raw: Vec<opt::CommaSeparated<Debug>>, 564 565 /// Options for configuring semantic execution of WebAssembly, `-W help` to see 566 /// all. 567 #[arg(short = 'W', long = "wasm", value_name = "KEY[=VAL[,..]]")] 568 #[serde(skip)] 569 wasm_raw: Vec<opt::CommaSeparated<Wasm>>, 570 571 /// Options for configuring WASI and its proposals, `-S help` to see all. 572 #[arg(short = 'S', long = "wasi", value_name = "KEY[=VAL[,..]]")] 573 #[serde(skip)] 574 wasi_raw: Vec<opt::CommaSeparated<Wasi>>, 575 576 /// Options to enable and configure execution recording, `-R help` to see all. 577 /// 578 /// Generates a serialized trace of the Wasm module execution that captures all 579 /// non-determinism observable by the module. This trace can subsequently be 580 /// re-executed in a determinstic, embedding-agnostic manner (see the `wasmtime replay` command). 581 /// 582 /// Note: Minimal configuration options for deterministic Wasm semantics will be 583 /// enforced during recording by default (NaN canonicalization, deterministic relaxed SIMD). 584 #[arg(short = 'R', long = "record", value_name = "KEY[=VAL[,..]]")] 585 #[serde(skip)] 586 record_raw: Vec<opt::CommaSeparated<Record>>, 587 588 // These fields are filled in by the `configure` method below via the 589 // options parsed from the CLI above. This is what the CLI should use. 590 #[arg(skip)] 591 #[serde(skip)] 592 configured: bool, 593 594 #[arg(skip)] 595 #[serde(rename = "optimize", default)] 596 pub opts: OptimizeOptions, 597 598 #[arg(skip)] 599 #[serde(rename = "codegen", default)] 600 pub codegen: CodegenOptions, 601 602 #[arg(skip)] 603 #[serde(rename = "debug", default)] 604 pub debug: DebugOptions, 605 606 #[arg(skip)] 607 #[serde(rename = "wasm", default)] 608 pub wasm: WasmOptions, 609 610 #[arg(skip)] 611 #[serde(rename = "wasi", default)] 612 pub wasi: WasiOptions, 613 614 #[arg(skip)] 615 #[serde(rename = "record", default)] 616 pub record: RecordOptions, 617 618 /// The target triple; default is the host triple 619 #[arg(long, value_name = "TARGET")] 620 #[serde(skip)] 621 pub target: Option<String>, 622 623 /// Use the specified TOML configuration file. 624 /// This TOML configuration file can provide same configuration options as the 625 /// `--optimize`, `--codgen`, `--debug`, `--wasm`, `--wasi` CLI options, with a couple exceptions. 626 /// 627 /// Additional options specified on the command line will take precedent over options loaded from 628 /// this TOML file. 629 #[arg(long = "config", value_name = "FILE")] 630 #[serde(skip)] 631 pub config: Option<PathBuf>, 632 } 633 634 macro_rules! match_feature { 635 ( 636 [$feat:tt : $config:expr] 637 $val:ident => $e:expr, 638 $p:pat => err, 639 ) => { 640 #[cfg(feature = $feat)] 641 { 642 if let Some($val) = $config { 643 $e; 644 } 645 } 646 #[cfg(not(feature = $feat))] 647 { 648 if let Some($p) = $config { 649 bail!(concat!("support for ", $feat, " disabled at compile time")); 650 } 651 } 652 }; 653 } 654 655 impl CommonOptions { 656 /// Creates a blank new set of [`CommonOptions`] that can be configured. 657 pub fn new() -> CommonOptions { 658 CommonOptions { 659 opts_raw: Vec::new(), 660 codegen_raw: Vec::new(), 661 debug_raw: Vec::new(), 662 wasm_raw: Vec::new(), 663 wasi_raw: Vec::new(), 664 record_raw: Vec::new(), 665 configured: true, 666 opts: Default::default(), 667 codegen: Default::default(), 668 debug: Default::default(), 669 wasm: Default::default(), 670 wasi: Default::default(), 671 record: Default::default(), 672 target: None, 673 config: None, 674 } 675 } 676 677 fn configure(&mut self) -> Result<()> { 678 if self.configured { 679 return Ok(()); 680 } 681 self.configured = true; 682 if let Some(toml_config_path) = &self.config { 683 let toml_options = CommonOptions::from_file(toml_config_path)?; 684 self.opts = toml_options.opts; 685 self.codegen = toml_options.codegen; 686 self.debug = toml_options.debug; 687 self.wasm = toml_options.wasm; 688 self.wasi = toml_options.wasi; 689 self.record = toml_options.record; 690 } 691 self.opts.configure_with(&self.opts_raw); 692 self.codegen.configure_with(&self.codegen_raw); 693 self.debug.configure_with(&self.debug_raw); 694 self.wasm.configure_with(&self.wasm_raw); 695 self.wasi.configure_with(&self.wasi_raw); 696 self.record.configure_with(&self.record_raw); 697 Ok(()) 698 } 699 700 pub fn init_logging(&mut self) -> Result<()> { 701 self.configure()?; 702 if self.debug.logging == Some(false) { 703 return Ok(()); 704 } 705 #[cfg(feature = "logging")] 706 if self.debug.log_to_files == Some(true) { 707 let prefix = "wasmtime.dbg."; 708 init_file_per_thread_logger(prefix); 709 } else { 710 use std::io::IsTerminal; 711 use tracing_subscriber::{EnvFilter, FmtSubscriber}; 712 let builder = FmtSubscriber::builder() 713 .with_writer(std::io::stderr) 714 .with_env_filter(EnvFilter::from_env("WASMTIME_LOG")) 715 .with_ansi(std::io::stderr().is_terminal()); 716 if std::env::var("WASMTIME_LOG_NO_CONTEXT").is_ok_and(|value| value.eq("1")) { 717 builder 718 .with_level(false) 719 .with_target(false) 720 .without_time() 721 .init() 722 } else { 723 builder.init(); 724 } 725 } 726 #[cfg(not(feature = "logging"))] 727 if self.debug.log_to_files == Some(true) || self.debug.logging == Some(true) { 728 bail!("support for logging disabled at compile time"); 729 } 730 Ok(()) 731 } 732 733 pub fn config(&mut self, pooling_allocator_default: Option<bool>) -> Result<Config> { 734 self.configure()?; 735 let mut config = Config::new(); 736 737 match_feature! { 738 ["cranelift" : self.codegen.compiler] 739 strategy => config.strategy(strategy), 740 _ => err, 741 } 742 match_feature! { 743 ["gc" : self.codegen.collector] 744 collector => config.collector(collector), 745 _ => err, 746 } 747 if let Some(target) = &self.target { 748 config.target(target)?; 749 } 750 match_feature! { 751 ["cranelift" : self.codegen.cranelift_debug_verifier] 752 enable => config.cranelift_debug_verifier(enable), 753 true => err, 754 } 755 if let Some(enable) = self.debug.debug_info { 756 config.debug_info(enable); 757 } 758 match_feature! { 759 ["debug" : self.debug.guest_debug] 760 enable => config.guest_debug(enable), 761 _ => err, 762 } 763 if self.debug.coredump.is_some() { 764 #[cfg(feature = "coredump")] 765 config.coredump_on_trap(true); 766 #[cfg(not(feature = "coredump"))] 767 bail!("support for coredumps disabled at compile time"); 768 } 769 match_feature! { 770 ["cranelift" : self.opts.opt_level] 771 level => config.cranelift_opt_level(level), 772 _ => err, 773 } 774 match_feature! { 775 ["cranelift": self.opts.regalloc_algorithm] 776 algo => config.cranelift_regalloc_algorithm(algo), 777 _ => err, 778 } 779 match_feature! { 780 ["cranelift" : self.wasm.nan_canonicalization] 781 enable => config.cranelift_nan_canonicalization(enable), 782 true => err, 783 } 784 match_feature! { 785 ["cranelift" : self.codegen.pcc] 786 enable => config.cranelift_pcc(enable), 787 true => err, 788 } 789 790 self.enable_wasm_features(&mut config)?; 791 792 #[cfg(feature = "cranelift")] 793 for (name, value) in self.codegen.cranelift.iter() { 794 let name = name.replace('-', "_"); 795 unsafe { 796 match value { 797 Some(val) => { 798 config.cranelift_flag_set(&name, val); 799 } 800 None => { 801 config.cranelift_flag_enable(&name); 802 } 803 } 804 } 805 } 806 #[cfg(not(feature = "cranelift"))] 807 if !self.codegen.cranelift.is_empty() { 808 bail!("support for cranelift disabled at compile time"); 809 } 810 811 #[cfg(feature = "cache")] 812 if self.codegen.cache != Some(false) { 813 use wasmtime::Cache; 814 let cache = match &self.codegen.cache_config { 815 Some(path) => Cache::from_file(Some(Path::new(path)))?, 816 None => Cache::from_file(None)?, 817 }; 818 config.cache(Some(cache)); 819 } 820 #[cfg(not(feature = "cache"))] 821 if self.codegen.cache == Some(true) { 822 bail!("support for caching disabled at compile time"); 823 } 824 825 match_feature! { 826 ["parallel-compilation" : self.codegen.parallel_compilation] 827 enable => config.parallel_compilation(enable), 828 true => err, 829 } 830 831 let memory_reservation = self 832 .opts 833 .memory_reservation 834 .or(self.opts.static_memory_maximum_size); 835 if let Some(size) = memory_reservation { 836 config.memory_reservation(size); 837 } 838 839 if let Some(enable) = self.opts.static_memory_forced { 840 config.memory_may_move(!enable); 841 } 842 if let Some(enable) = self.opts.memory_may_move { 843 config.memory_may_move(enable); 844 } 845 846 let memory_guard_size = self 847 .opts 848 .static_memory_guard_size 849 .or(self.opts.dynamic_memory_guard_size) 850 .or(self.opts.memory_guard_size); 851 if let Some(size) = memory_guard_size { 852 config.memory_guard_size(size); 853 } 854 855 let mem_for_growth = self 856 .opts 857 .memory_reservation_for_growth 858 .or(self.opts.dynamic_memory_reserved_for_growth); 859 if let Some(size) = mem_for_growth { 860 config.memory_reservation_for_growth(size); 861 } 862 if let Some(enable) = self.opts.guard_before_linear_memory { 863 config.guard_before_linear_memory(enable); 864 } 865 if let Some(enable) = self.opts.table_lazy_init { 866 config.table_lazy_init(enable); 867 } 868 869 // If fuel has been configured, set the `consume fuel` flag on the config. 870 if self.wasm.fuel.is_some() { 871 config.consume_fuel(true); 872 } 873 874 if let Some(enable) = self.wasm.epoch_interruption { 875 config.epoch_interruption(enable); 876 } 877 if let Some(enable) = self.debug.address_map { 878 config.generate_address_map(enable); 879 } 880 if let Some(enable) = self.opts.memory_init_cow { 881 config.memory_init_cow(enable); 882 } 883 if let Some(size) = self.opts.memory_guaranteed_dense_image_size { 884 config.memory_guaranteed_dense_image_size(size); 885 } 886 if let Some(enable) = self.opts.signals_based_traps { 887 config.signals_based_traps(enable); 888 } 889 if let Some(enable) = self.codegen.native_unwind_info { 890 config.native_unwind_info(enable); 891 } 892 if let Some(enable) = self.codegen.inlining { 893 config.compiler_inlining(enable); 894 } 895 896 // async_stack_size enabled by either async or stack-switching, so 897 // cannot directly use match_feature! 898 #[cfg(any(feature = "async", feature = "stack-switching"))] 899 { 900 if let Some(size) = self.wasm.async_stack_size { 901 config.async_stack_size(size); 902 } 903 } 904 #[cfg(not(any(feature = "async", feature = "stack-switching")))] 905 { 906 if let Some(_size) = self.wasm.async_stack_size { 907 bail!(concat!( 908 "support for async/stack-switching disabled at compile time" 909 )); 910 } 911 } 912 913 match_feature! { 914 ["pooling-allocator" : self.opts.pooling_allocator.or(pooling_allocator_default)] 915 enable => { 916 if enable { 917 let mut cfg = wasmtime::PoolingAllocationConfig::default(); 918 if let Some(size) = self.opts.pooling_memory_keep_resident { 919 cfg.linear_memory_keep_resident(size); 920 } 921 if let Some(size) = self.opts.pooling_table_keep_resident { 922 cfg.table_keep_resident(size); 923 } 924 if let Some(limit) = self.opts.pooling_total_core_instances { 925 cfg.total_core_instances(limit); 926 } 927 if let Some(limit) = self.opts.pooling_total_component_instances { 928 cfg.total_component_instances(limit); 929 } 930 if let Some(limit) = self.opts.pooling_total_memories { 931 cfg.total_memories(limit); 932 } 933 if let Some(limit) = self.opts.pooling_total_tables { 934 cfg.total_tables(limit); 935 } 936 if let Some(limit) = self.opts.pooling_table_elements 937 .or(self.wasm.max_table_elements) 938 { 939 cfg.table_elements(limit); 940 } 941 if let Some(limit) = self.opts.pooling_max_core_instance_size { 942 cfg.max_core_instance_size(limit); 943 } 944 match_feature! { 945 ["async" : self.opts.pooling_total_stacks] 946 limit => cfg.total_stacks(limit), 947 _ => err, 948 } 949 if let Some(max) = self.opts.pooling_max_memory_size 950 .or(self.wasm.max_memory_size) 951 { 952 cfg.max_memory_size(max); 953 } 954 if let Some(size) = self.opts.pooling_decommit_batch_size { 955 cfg.decommit_batch_size(size); 956 } 957 if let Some(max) = self.opts.pooling_max_unused_warm_slots { 958 cfg.max_unused_warm_slots(max); 959 } 960 match_feature! { 961 ["async" : self.opts.pooling_async_stack_keep_resident] 962 size => cfg.async_stack_keep_resident(size), 963 _ => err, 964 } 965 if let Some(max) = self.opts.pooling_max_component_instance_size { 966 cfg.max_component_instance_size(max); 967 } 968 if let Some(max) = self.opts.pooling_max_core_instances_per_component { 969 cfg.max_core_instances_per_component(max); 970 } 971 if let Some(max) = self.opts.pooling_max_memories_per_component { 972 cfg.max_memories_per_component(max); 973 } 974 if let Some(max) = self.opts.pooling_max_tables_per_component { 975 cfg.max_tables_per_component(max); 976 } 977 if let Some(max) = self.opts.pooling_max_tables_per_module { 978 cfg.max_tables_per_module(max); 979 } 980 if let Some(max) = self.opts.pooling_max_memories_per_module { 981 cfg.max_memories_per_module(max); 982 } 983 match_feature! { 984 ["memory-protection-keys" : self.opts.pooling_memory_protection_keys] 985 enable => cfg.memory_protection_keys(enable), 986 _ => err, 987 } 988 match_feature! { 989 ["memory-protection-keys" : self.opts.pooling_max_memory_protection_keys] 990 max => cfg.max_memory_protection_keys(max), 991 _ => err, 992 } 993 match_feature! { 994 ["gc" : self.opts.pooling_total_gc_heaps] 995 max => cfg.total_gc_heaps(max), 996 _ => err, 997 } 998 if let Some(enabled) = self.opts.pooling_pagemap_scan { 999 cfg.pagemap_scan(enabled); 1000 } 1001 config.allocation_strategy(wasmtime::InstanceAllocationStrategy::Pooling(cfg)); 1002 } 1003 }, 1004 true => err, 1005 } 1006 1007 if self.opts.pooling_memory_protection_keys.is_some() 1008 && !self.opts.pooling_allocator.unwrap_or(false) 1009 { 1010 bail!("memory protection keys require the pooling allocator"); 1011 } 1012 1013 if self.opts.pooling_max_memory_protection_keys.is_some() 1014 && !self.opts.pooling_memory_protection_keys.is_some() 1015 { 1016 bail!("max memory protection keys requires memory protection keys to be enabled"); 1017 } 1018 1019 match_feature! { 1020 ["async" : self.wasm.async_stack_zeroing] 1021 enable => config.async_stack_zeroing(enable), 1022 _ => err, 1023 } 1024 1025 if let Some(max) = self.wasm.max_wasm_stack { 1026 config.max_wasm_stack(max); 1027 1028 // If `-Wasync-stack-size` isn't passed then automatically adjust it 1029 // to the wasm stack size provided here too. That prevents the need 1030 // to pass both when one can generally be inferred from the other. 1031 #[cfg(any(feature = "async", feature = "stack-switching"))] 1032 if self.wasm.async_stack_size.is_none() { 1033 const DEFAULT_HOST_STACK: usize = 512 << 10; 1034 config.async_stack_size(max + DEFAULT_HOST_STACK); 1035 } 1036 } 1037 1038 if let Some(enable) = self.wasm.relaxed_simd_deterministic { 1039 config.relaxed_simd_deterministic(enable); 1040 } 1041 match_feature! { 1042 ["cranelift" : self.wasm.wmemcheck] 1043 enable => config.wmemcheck(enable), 1044 true => err, 1045 } 1046 1047 if let Some(enable) = self.wasm.gc_support { 1048 config.gc_support(enable); 1049 } 1050 1051 if let Some(enable) = self.wasm.concurrency_support { 1052 config.concurrency_support(enable); 1053 } 1054 1055 if let Some(enable) = self.wasm.shared_memory { 1056 config.shared_memory(enable); 1057 } 1058 1059 let record = &self.record; 1060 match_feature! { 1061 ["rr" : &record.path] 1062 _path => { 1063 bail!("recording configuration for `rr` feature is not supported yet"); 1064 }, 1065 _ => err, 1066 } 1067 1068 Ok(config) 1069 } 1070 1071 pub fn enable_wasm_features(&self, config: &mut Config) -> Result<()> { 1072 let all = self.wasm.all_proposals; 1073 1074 if let Some(enable) = self.wasm.simd.or(all) { 1075 config.wasm_simd(enable); 1076 } 1077 if let Some(enable) = self.wasm.relaxed_simd.or(all) { 1078 config.wasm_relaxed_simd(enable); 1079 } 1080 if let Some(enable) = self.wasm.bulk_memory.or(all) { 1081 config.wasm_bulk_memory(enable); 1082 } 1083 if let Some(enable) = self.wasm.multi_value.or(all) { 1084 config.wasm_multi_value(enable); 1085 } 1086 if let Some(enable) = self.wasm.tail_call.or(all) { 1087 config.wasm_tail_call(enable); 1088 } 1089 if let Some(enable) = self.wasm.multi_memory.or(all) { 1090 config.wasm_multi_memory(enable); 1091 } 1092 if let Some(enable) = self.wasm.memory64.or(all) { 1093 config.wasm_memory64(enable); 1094 } 1095 if let Some(enable) = self.wasm.stack_switching { 1096 config.wasm_stack_switching(enable); 1097 } 1098 if let Some(enable) = self.wasm.custom_page_sizes.or(all) { 1099 config.wasm_custom_page_sizes(enable); 1100 } 1101 if let Some(enable) = self.wasm.wide_arithmetic.or(all) { 1102 config.wasm_wide_arithmetic(enable); 1103 } 1104 if let Some(enable) = self.wasm.extended_const.or(all) { 1105 config.wasm_extended_const(enable); 1106 } 1107 1108 macro_rules! handle_conditionally_compiled { 1109 ($(($feature:tt, $field:tt, $method:tt))*) => ($( 1110 if let Some(enable) = self.wasm.$field.or(all) { 1111 #[cfg(feature = $feature)] 1112 config.$method(enable); 1113 #[cfg(not(feature = $feature))] 1114 if enable && all.is_none() { 1115 bail!("support for {} was disabled at compile-time", $feature); 1116 } 1117 } 1118 )*) 1119 } 1120 1121 handle_conditionally_compiled! { 1122 ("component-model", component_model, wasm_component_model) 1123 ("component-model-async", component_model_async, wasm_component_model_async) 1124 ("component-model-async", component_model_async_builtins, wasm_component_model_async_builtins) 1125 ("component-model-async", component_model_async_stackful, wasm_component_model_async_stackful) 1126 ("component-model-async", component_model_threading, wasm_component_model_threading) 1127 ("component-model", component_model_error_context, wasm_component_model_error_context) 1128 ("component-model", component_model_fixed_length_lists, wasm_component_model_fixed_length_lists) 1129 ("threads", threads, wasm_threads) 1130 ("gc", gc, wasm_gc) 1131 ("gc", reference_types, wasm_reference_types) 1132 ("gc", function_references, wasm_function_references) 1133 ("gc", exceptions, wasm_exceptions) 1134 ("stack-switching", stack_switching, wasm_stack_switching) 1135 } 1136 1137 if let Some(enable) = self.wasm.component_model_gc { 1138 #[cfg(all(feature = "component-model", feature = "gc"))] 1139 config.wasm_component_model_gc(enable); 1140 #[cfg(not(all(feature = "component-model", feature = "gc")))] 1141 if enable && all.is_none() { 1142 bail!("support for `component-model-gc` was disabled at compile time") 1143 } 1144 } 1145 1146 Ok(()) 1147 } 1148 1149 pub fn from_file<P: AsRef<Path>>(path: P) -> Result<Self> { 1150 let path_ref = path.as_ref(); 1151 let file_contents = fs::read_to_string(path_ref) 1152 .with_context(|| format!("failed to read config file: {path_ref:?}"))?; 1153 toml::from_str::<CommonOptions>(&file_contents) 1154 .with_context(|| format!("failed to parse TOML config file {path_ref:?}")) 1155 } 1156 } 1157 1158 #[cfg(test)] 1159 mod tests { 1160 use wasmtime::{OptLevel, RegallocAlgorithm}; 1161 1162 use super::*; 1163 1164 #[test] 1165 fn from_toml() { 1166 // empty toml 1167 let empty_toml = ""; 1168 let mut common_options: CommonOptions = toml::from_str(empty_toml).unwrap(); 1169 common_options.config(None).unwrap(); 1170 1171 // basic toml 1172 let basic_toml = r#" 1173 [optimize] 1174 [codegen] 1175 [debug] 1176 [wasm] 1177 [wasi] 1178 [record] 1179 "#; 1180 let mut common_options: CommonOptions = toml::from_str(basic_toml).unwrap(); 1181 common_options.config(None).unwrap(); 1182 1183 // toml with custom deserialization to match CLI flag parsing 1184 for (opt_value, expected) in [ 1185 ("0", Some(OptLevel::None)), 1186 ("1", Some(OptLevel::Speed)), 1187 ("2", Some(OptLevel::Speed)), 1188 ("\"s\"", Some(OptLevel::SpeedAndSize)), 1189 ("\"hello\"", None), // should fail 1190 ("3", None), // should fail 1191 ] { 1192 let toml = format!( 1193 r#" 1194 [optimize] 1195 opt-level = {opt_value} 1196 "#, 1197 ); 1198 let parsed_opt_level = toml::from_str::<CommonOptions>(&toml) 1199 .ok() 1200 .and_then(|common_options| common_options.opts.opt_level); 1201 1202 assert_eq!( 1203 parsed_opt_level, expected, 1204 "Mismatch for input '{opt_value}'. Parsed: {parsed_opt_level:?}, Expected: {expected:?}" 1205 ); 1206 } 1207 1208 // Regalloc algorithm 1209 for (regalloc_value, expected) in [ 1210 ("\"backtracking\"", Some(RegallocAlgorithm::Backtracking)), 1211 ("\"single-pass\"", Some(RegallocAlgorithm::SinglePass)), 1212 ("\"hello\"", None), // should fail 1213 ("3", None), // should fail 1214 ("true", None), // should fail 1215 ] { 1216 let toml = format!( 1217 r#" 1218 [optimize] 1219 regalloc-algorithm = {regalloc_value} 1220 "#, 1221 ); 1222 let parsed_regalloc_algorithm = toml::from_str::<CommonOptions>(&toml) 1223 .ok() 1224 .and_then(|common_options| common_options.opts.regalloc_algorithm); 1225 assert_eq!( 1226 parsed_regalloc_algorithm, expected, 1227 "Mismatch for input '{regalloc_value}'. Parsed: {parsed_regalloc_algorithm:?}, Expected: {expected:?}" 1228 ); 1229 } 1230 1231 // Strategy 1232 for (strategy_value, expected) in [ 1233 ("\"cranelift\"", Some(wasmtime::Strategy::Cranelift)), 1234 ("\"winch\"", Some(wasmtime::Strategy::Winch)), 1235 ("\"hello\"", None), // should fail 1236 ("5", None), // should fail 1237 ("true", None), // should fail 1238 ] { 1239 let toml = format!( 1240 r#" 1241 [codegen] 1242 compiler = {strategy_value} 1243 "#, 1244 ); 1245 let parsed_strategy = toml::from_str::<CommonOptions>(&toml) 1246 .ok() 1247 .and_then(|common_options| common_options.codegen.compiler); 1248 assert_eq!( 1249 parsed_strategy, expected, 1250 "Mismatch for input '{strategy_value}'. Parsed: {parsed_strategy:?}, Expected: {expected:?}", 1251 ); 1252 } 1253 1254 // Collector 1255 for (collector_value, expected) in [ 1256 ( 1257 "\"drc\"", 1258 Some(wasmtime::Collector::DeferredReferenceCounting), 1259 ), 1260 ("\"null\"", Some(wasmtime::Collector::Null)), 1261 ("\"hello\"", None), // should fail 1262 ("5", None), // should fail 1263 ("true", None), // should fail 1264 ] { 1265 let toml = format!( 1266 r#" 1267 [codegen] 1268 collector = {collector_value} 1269 "#, 1270 ); 1271 let parsed_collector = toml::from_str::<CommonOptions>(&toml) 1272 .ok() 1273 .and_then(|common_options| common_options.codegen.collector); 1274 assert_eq!( 1275 parsed_collector, expected, 1276 "Mismatch for input '{collector_value}'. Parsed: {parsed_collector:?}, Expected: {expected:?}", 1277 ); 1278 } 1279 } 1280 } 1281 1282 impl Default for CommonOptions { 1283 fn default() -> CommonOptions { 1284 CommonOptions::new() 1285 } 1286 } 1287 1288 impl fmt::Display for CommonOptions { 1289 fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { 1290 let CommonOptions { 1291 codegen_raw, 1292 codegen, 1293 debug_raw, 1294 debug, 1295 opts_raw, 1296 opts, 1297 wasm_raw, 1298 wasm, 1299 wasi_raw, 1300 wasi, 1301 record_raw, 1302 record, 1303 configured, 1304 target, 1305 config, 1306 } = self; 1307 if let Some(target) = target { 1308 write!(f, "--target {target} ")?; 1309 } 1310 if let Some(config) = config { 1311 write!(f, "--config {} ", config.display())?; 1312 } 1313 1314 let codegen_flags; 1315 let opts_flags; 1316 let wasi_flags; 1317 let wasm_flags; 1318 let debug_flags; 1319 let record_flags; 1320 1321 if *configured { 1322 codegen_flags = codegen.to_options(); 1323 debug_flags = debug.to_options(); 1324 wasi_flags = wasi.to_options(); 1325 wasm_flags = wasm.to_options(); 1326 opts_flags = opts.to_options(); 1327 record_flags = record.to_options(); 1328 } else { 1329 codegen_flags = codegen_raw 1330 .iter() 1331 .flat_map(|t| t.0.iter()) 1332 .cloned() 1333 .collect(); 1334 debug_flags = debug_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1335 wasi_flags = wasi_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1336 wasm_flags = wasm_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1337 opts_flags = opts_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1338 record_flags = record_raw 1339 .iter() 1340 .flat_map(|t| t.0.iter()) 1341 .cloned() 1342 .collect(); 1343 } 1344 1345 for flag in codegen_flags { 1346 write!(f, "-C{flag} ")?; 1347 } 1348 for flag in opts_flags { 1349 write!(f, "-O{flag} ")?; 1350 } 1351 for flag in wasi_flags { 1352 write!(f, "-S{flag} ")?; 1353 } 1354 for flag in wasm_flags { 1355 write!(f, "-W{flag} ")?; 1356 } 1357 for flag in debug_flags { 1358 write!(f, "-D{flag} ")?; 1359 } 1360 for flag in record_flags { 1361 write!(f, "-R{flag} ")?; 1362 } 1363 1364 Ok(()) 1365 } 1366 } 1367