[lldb] Show the DBGError if dsymForUUID can't find a dSYM

Show the user the DBGError (if available) when dsymForUUID fails.

rdar://90949180

Differential revision: https://reviews.llvm.org/D123743

Load dyld manually with 'main bin spec' userland corefiles

In ProcessMachCore::DoLoadCore when we have a standalone
binary and a 'main bin spec' LC_NOTE detailing the UUID and
load address, ProcessM

Load dyld manually with 'main bin spec' userland corefiles

In ProcessMachCore::DoLoadCore when we have a standalone
binary and a 'main bin spec' LC_NOTE detailing the UUID and
load address, ProcessMachCore will do a (potentially slow)
lookup to try to find the binary and/or dSYM. For kernel and
userland corefile using 'main bin spec', we would follow the
normal schemes of locating them. DynamicLoaderDarwinKernel would
use the same (possibly expensive) calls to find the correct
binary. dyld by default would use the in-core-file binary image,
and so if the corefile didn't include the entire address space,
the LINKEDIT for dyld could be missing. This means we can't find
the dyld4::dyld_all_image_infos struct, which tells us where the
other binaries are loaded in memory.

Treat userland 'bin main spec' like we do standalone firmewares;
try the expensive checks to find the best dyld we can, before
falling back to using a memory module out of the corefile.

Also add a little TODO for myself in this load_standalone_binary
function that we should handle the case of a binary in the shared
cache correctly, creating a memory module in the corefile and
using the segment load addresses from that to set our segment
load addresses for the final binary.

rdar://89717101

show more ...

Reland "[lldb] Remove non address bits when looking up memory regions"

This reverts commit 0df522969a7a0128052bd79182c8d58e00556e2f.

Additional checks are added to fix the detection of the last mem

Reland "[lldb] Remove non address bits when looking up memory regions"

This reverts commit 0df522969a7a0128052bd79182c8d58e00556e2f.

Additional checks are added to fix the detection of the last memory region
in GetMemoryRegions or repeating the "memory region" command when the
target has non-address bits.

Normally you keep reading from address 0, looking up each region's end
address until you get LLDB_INVALID_ADDR as the region end address.
(0xffffffffffffffff)

This is what the remote will return once you go beyond the last mapped region:
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0001000000000000-0xffffffffffffffff) ---

Problem is that when we "fix" the lookup address, we remove some bits
from it. On an AArch64 system we have 48 bit virtual addresses, so when
we fix the end address of the [stack] region the result is 0.
So we loop back to the start.

[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0000000000000000-0x0000000000400000) ---

To fix this I added an additional check for the last range.
If the end address of the region is different once you apply
FixDataAddress, we are at the last region.

Since the end of the last region will be the last valid mappable
address, plus 1. That 1 will be removed by the ABI plugin.

The only side effect is that on systems with non-address bits, you
won't get that last catch all unmapped region from the max virtual
address up to 0xf...f.

[0x0000fffff8000000-0x0000fffffffdf000) ---
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
<ends here>

Though in some way this is more correct because that region is not
just unmapped, it's not mappable at all.

No extra testing is needed because this is already covered by
TestMemoryRegion.py, I simply forgot to run it on system that had
both top byte ignore and pointer authentication.

This change has been tested on a qemu VM with top byte ignore,
memory tagging and pointer authentication enabled.

Reviewed By: omjavaid

Differential Revision: https://reviews.llvm.org/D115508

show more ...

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
inf

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.

After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.

show more ...

[lldb] Convert "LLDB" log channel to the new API

Support v2 of 'main bin spec' Mach-O LC_NOTE in corefiles

Version 2 of 'main bin spec' LC_NOTE allows for the specification
of a slide of where the binary is loaded in the corefile virtual
address s

Support v2 of 'main bin spec' Mach-O LC_NOTE in corefiles

Version 2 of 'main bin spec' LC_NOTE allows for the specification
of a slide of where the binary is loaded in the corefile virtual
address space. It also adds a (currently unused) platform field
for the main binary.

Some corefile creators will only have a UUID and an offset to be
applied to the binary.

Changed TestFirmwareCorefiles.py to test this new form of
'main bin spec' with a slide, and also to run on both x86_64
and arm64 macOS systems.

Differential Revision: https://reviews.llvm.org/D116094
rdar://85938455

show more ...

Revert "Reland "[lldb] Remove non address bits when looking up memory regions""

This reverts commit fac3f20de55769d028bd92220e74f22fa57dd4b2.

I found this has broken how we detect the last memory r

Revert "Reland "[lldb] Remove non address bits when looking up memory regions""

This reverts commit fac3f20de55769d028bd92220e74f22fa57dd4b2.

I found this has broken how we detect the last memory region in
GetMemoryRegions/"memory region" command.

When you're debugging an AArch64 system with pointer authentication,
the ABI plugin will remove the top bit from the end address of the last
user mapped area.

(lldb)
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]

ABI plugin removes anything above the 48th bit (48 bit virtual addresses
by default on AArch64, leaving an address of 0.

(lldb)
[0x0000000000000000-0x0000000000400000) ---

You get back a mapping for 0 and get into an infinite loop.

show more ...

Reland "[lldb] Remove non address bits when looking up memory regions"

This reverts commit 5fbcf677347e38718461496d9e9e184a7a30c3fb.

ProcessDebugger is used in ProcessWindows and NativeProcessWindo

Reland "[lldb] Remove non address bits when looking up memory regions"

This reverts commit 5fbcf677347e38718461496d9e9e184a7a30c3fb.

ProcessDebugger is used in ProcessWindows and NativeProcessWindows.
I thought I was simplifying things by renaming to DoGetMemoryRegionInfo
in ProcessDebugger but the Native process side expects "GetMemoryRegionInfo".

Follow the pattern that WriteMemory uses. So:
* ProcessWindows::DoGetMemoryRegioninfo calls ProcessDebugger::GetMemoryRegionInfo
* NativeProcessWindows::GetMemoryRegionInfo does the same

show more ...

Revert "[lldb] Remove non address bits when looking up memory regions"

This reverts commit 6f5ce43b433706c3ae5c37022d6c0964b6bfadf8 due to
build failure on Windows.

[lldb] Remove non address bits when looking up memory regions

On AArch64 we have various things using the non address bits
of pointers. This means when you lookup their containing region
you won't f

[lldb] Remove non address bits when looking up memory regions

On AArch64 we have various things using the non address bits
of pointers. This means when you lookup their containing region
you won't find it if you don't remove them.

This changes Process GetMemoryRegionInfo to a non virtual method
that uses the current ABI plugin to remove those bits. Then it
calls DoGetMemoryRegionInfo.

That function does the actual work and is virtual to be overriden
by Process implementations.

A test case is added that runs on AArch64 Linux using the top
byte ignore feature.

Reviewed By: omjavaid

Differential Revision: https://reviews.llvm.org/D102757

show more ...

[lldb] Remove ConstString from Process, ScriptInterpreter and StructuredData plugin names

Remove ConstString from DynamicLoader, JITLoader and Instruction plugin names

[lldb] Return StringRef from PluginInterface::GetPluginName

There is no reason why this function should be returning a ConstString.

While modifying these files, I also fixed several instances where

[lldb] Return StringRef from PluginInterface::GetPluginName

There is no reason why this function should be returning a ConstString.

While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.

I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.

Differential Revision: https://reviews.llvm.org/D111877

show more ...

Don't register mem segments that aren't present in a corefile

A Mach-O corefile has an array of memory segments, representing
the memory of the process at the point of the capture. Each segment
has

Don't register mem segments that aren't present in a corefile

A Mach-O corefile has an array of memory segments, representing
the memory of the process at the point of the capture. Each segment
has a virtual address + size, and a file offset + size. The file
size may be less than the virtual address size, indicating that
the memory was unavailable. When ProcessMachCore::DoLoadCore scans
this array of memory segments, it builds up a table to translate
virtual addresses to file offsets, for memory read requests.
This lookup table combines contiguous memory segments into a single
entry, to reduce the number of entries (some corefile writers will
emit a separate segement for each virtual meory page).

This contiguous check wasn't taking into account a segment that
isn't present in the corefile, e.g. filesize==0, and every contiguous
memory segment after that point would result in lldb reading the
wrong offset of the file because it didn't account for this.

I'd like to have an error message when someone tries to read memory from
one of these segments, instead of returning all zeroes, so this patch
intentionally leaves these out of the vmaddr -> fileoff table (and
avoids combining them with segments that actually do exist in the
corefile).

I'm a little unsure of writing a test for this one; I'd have to do
a yaml2obj of a corefile with the problem, or add an internal mode
to the Mach-O process save-core where it could write a filesize==0
segment while it was writing one.

rdar://83382487

show more ...

[lldb] Remove PluginInterface::GetPluginVersion

In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.

Differential Revision: https://

[lldb] Remove PluginInterface::GetPluginVersion

In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.

Differential Revision: https://reviews.llvm.org/D109600

show more ...

Read and write a LC_NOTE "addrable bits" for addressing mask

This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code addre

Read and write a LC_NOTE "addrable bits" for addressing mask

This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code address mask (e.g. AArch64 v8.3 with ptrauth aka arm64e).
Add code to ObjectFileMachO to read that LC_NOTE from corefiles,
and ProcessMachCore to set the process masks based on it when reading
a corefile back in.

Also have "process status --verbose" print the current address masks
that lldb is using internally to strip ptrauth bits off of addresses.

Differential Revision: https://reviews.llvm.org/D106348
rdar://68630113

show more ...

Add a corefile style option to process save-core; skinny corefiles

Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modifie

Add a corefile style option to process save-core; skinny corefiles

Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.

debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.

Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.

rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387

show more ...

[lldb][NFC] Use C++ versions of the deprecated C standard library headers

The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivale

[lldb][NFC] Use C++ versions of the deprecated C standard library headers

The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.

Reviewed By: shafik

Differential Revision: https://reviews.llvm.org/D103084

show more ...

Handle all standalone combinations of LC_NOTEs w/ & w/o addr & uuid

Fill out ProcessMachCore::DoLoadCore to handle LC_NOTE hints with
a UUID or with a UUID+address, and load the binary at the specif

Handle all standalone combinations of LC_NOTEs w/ & w/o addr & uuid

Fill out ProcessMachCore::DoLoadCore to handle LC_NOTE hints with
a UUID or with a UUID+address, and load the binary at the specified
offset correctly. Add tests for all four combinations. Change
DynamicLoaderStatic to not re-set a Section's load address in the
Target if it's already been specified.

Differential Revision: https://reviews.llvm.org/D99571
rdar://51490545

show more ...

Handle a LC_NOTE main bin spec for user process corefiles

I was playing around with main bin spec LC_NOTEs and noticed
a small oversight in the parsing of user process corefile notes.

[ThreadPlan] fix exec on Linux

[lldb] Prevent 'process connect' from using local-only plugins

Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. T

[lldb] Prevent 'process connect' from using local-only plugins

Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.

Differential Revision: https://reviews.llvm.org/D91810

show more ...

[trace][intel-pt] Scaffold the 'thread trace start | stop' commands

Depends on D90490.

The stop command is simple and invokes the new method Trace::StopTracingThread(thread).

On the other hand, th

[trace][intel-pt] Scaffold the 'thread trace start | stop' commands

Depends on D90490.

The stop command is simple and invokes the new method Trace::StopTracingThread(thread).

On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.

Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.

As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.

Reviewed By: clayborg

Differential Revision: https://reviews.llvm.org/D90729

show more ...

Once we've found a firmware binary and loaded it, don't search more

Add the flag in ProcessMachCore::DoLoadCore that stops additional
searches for the binaries when we have an LC_NOTE identifying th

Once we've found a firmware binary and loaded it, don't search more

Add the flag in ProcessMachCore::DoLoadCore that stops additional
searches for the binaries when we have an LC_NOTE identifying the
firmware/standalone binary as the correct one & we have loaded it
successfully.

show more ...

Add support for firmware/standalone LC_NOTE "main bin spec" corefiles

When a Mach-O corefile has an LC_NOTE "main bin spec" for a
standalone binary / firmware, with only a UUID and no load
address,

Add support for firmware/standalone LC_NOTE "main bin spec" corefiles

When a Mach-O corefile has an LC_NOTE "main bin spec" for a
standalone binary / firmware, with only a UUID and no load
address, try to locate the binary and dSYM by UUID and if
found, load it at offset 0 for the user.

Add a test case that tests a firmware/standalone corefile
with both the "kern ver str" and "main bin spec" LC_NOTEs.

<rdar://problem/68193804>

Differential Revision: https://reviews.llvm.org/D88282

show more ...