selftests: mptcp: add missing kconfig for NF Mangle

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.

This KConfig is usuall

selftests: mptcp: add missing kconfig for NF Mangle

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: add missing kconfig for NF Filter in v6

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.

It is then required t

selftests: mptcp: add missing kconfig for NF Filter in v6

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.

It is then required to have IP6_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: add missing kconfig for NF Filter

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.

It is then required to have IP_NF_FI

selftests: mptcp: add missing kconfig for NF Filter

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.

It is then required to have IP_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: depend on SYN_COOKIES

MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.

Some CIs don't have this config option enabled and this is causing
issues in the

selftests: mptcp: depend on SYN_COOKIES

MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.

Some CIs don't have this config option enabled and this is causing
issues in the tests:

# ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
# [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected

There is no impact in the results but the test is not doing what it is
supposed to do.

Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Cc: [email protected]
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

selftests: mptcp: lib: skip if missing symbol

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

New functions are now available to easily detec

selftests: mptcp: lib: skip if missing symbol

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.

These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: [email protected]
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: add infinite map testcase

Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.

Add a new function

selftests: mptcp: add infinite map testcase

Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.

Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.

Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.

Also add the needed kernel configures in the selftests config file.

Suggested-by: Davide Caratti <[email protected]>
Co-developed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

selftests: mptcp: add tests for subflow creation failure

Verify that, when multiple endpoints are available, subflows
creation proceed even when the first additional subflow creation
fails - due to

selftests: mptcp: add tests for subflow creation failure

Verify that, when multiple endpoints are available, subflows
creation proceed even when the first additional subflow creation
fails - due to packet drop on the relevant link

Co-developed-by: Geliang Tang <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

selftests: mptcp: Remove the deprecated config NFT_COUNTER

NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listin

selftests: mptcp: Remove the deprecated config NFT_COUNTER

NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.

For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config

- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Ma Xinjian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

selftests: mptcp: add tproxy test case

No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.

The test case spawns listener in ns2 but ns1 will c

selftests: mptcp: add tproxy test case

No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.

The test case spawns listener in ns2 but ns1 will connect
to the ip address of ns4.

policy routing + tproxy rule will redirect packets to ns2 instead
of forward.

v3: - update mptcp/config (Mat Martineau)
- more verbose SKIP messages in mptcp_connect.sh

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

selftests: mptcp: add ADD_ADDR timeout test case

This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
ec

selftests: mptcp: add ADD_ADDR timeout test case

This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.

Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.

We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.

Since we added the netfilter rules in this test case, we need to update
the "config" file.

Suggested-by: Matthieu Baerts <[email protected]>
Suggested-by: Paolo Abeni <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: depends on built-in IPv6

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFI

selftests: mptcp: depends on built-in IPv6

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6
will stay disabled and selftests will fail.

We also need CONFIG_IPV6 to be built-in. For more details, please see
commit 0ed37ac586c0 ("mptcp: depends on IPV6 but not as a module").

Note that 'make kselftest-merge' will take all 'config' files found in
'tools/testsing/selftests'. Because some of them already set
CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if
MPTCP selftests are launched manually after having executed this command
to prepare the kernel config:

./scripts/kconfig/merge_config.sh -m .config \
./tools/testing/selftests/net/mptcp/config

Fixes: 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

selftests: mptcp: fix dependecies

Since commit df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
the MPTCP selftests relies on the MPTCP diag interface which is
enabled by a specific kconfi

selftests: mptcp: fix dependecies

Since commit df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
the MPTCP selftests relies on the MPTCP diag interface which is
enabled by a specific kconfig knob: be sure to include it.

Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

mptcp: add basic kselftest for mptcp

Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper

mptcp: add basic kselftest for mptcp

Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.

The "-c" command line option for mptcp_connect.sh is there for debugging:

The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.

The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.

Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.

The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io. Default is non-blocking
io using read/write/poll.

Will run automatically on "make kselftest".

Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.

A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:

https://patchwork.kernel.org/patch/11204935/

Co-developed-by: Paolo Abeni <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Co-developed-by: Mat Martineau <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Co-developed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Co-developed-by: Davide Caratti <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Christoph Paasch <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...