perf annotate: Prefer passing evsel to evsel->core.idx

An evsel idx may not be stable due to sorting, evlist removal,
etc. Try to reduce it being part of APIs by explicitly passing the
evsel in anno

perf annotate: Prefer passing evsel to evsel->core.idx

An evsel idx may not be stable due to sorting, evlist removal,
etc. Try to reduce it being part of APIs by explicitly passing the
evsel in annotate code. Internally the code just reads evsel->core.idx
so behavior is unchanged.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Chen Ni <[email protected]>
Cc: Athira Rajeev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>

show more ...

perf annotate: Display the branch counter histogram

Display the branch counter histogram in the annotation view.

Press 'B' to display the branch counter's abbreviation list as well.

Samples: 1M

perf annotate: Display the branch counter histogram

Display the branch counter histogram in the annotation view.

Press 'B' to display the branch counter's abbreviation list as well.

Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }',
4000 Hz, Event count (approx.):
f3 /home/sdp/test/tchain_edit [Percent: local period]
Percent │ IPC Cycle Branch Counter (Average IPC: 1.39, IPC Coverage: 29.4%)
│ 0000000000401755 <f3>:
0.00 0.00 │ endbr64
│ push %rbp
│ mov %rsp,%rbp
│ movl $0x0,-0x4(%rbp)
0.00 0.00 │1.33 3 |A |- | ↓ jmp 25
11.03 11.03 │ 11: mov -0x4(%rbp),%eax
│ and $0x1,%eax
│ test %eax,%eax
17.13 17.13 │2.41 1 |A |- | ↓ je 21
│ addl $0x1,-0x4(%rbp)
21.84 21.84 │2.22 2 |AA |- | ↓ jmp 25
17.13 17.13 │ 21: addl $0x1,-0x4(%rbp)
21.84 21.84 │ 25: cmpl $0x270f,-0x4(%rbp)
11.03 11.03 │0.61 3 |A |- | ↑ jle 11
│ nop
│ pop %rbp
0.00 0.00 │0.24 20 |AA |B | ← ret

Originally-by: Tinghao Zhang <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Chen Ni <[email protected]>
Cc:

perf annotate: Convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Chen Ni <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahelenia Ziemiańska <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf dso: Add reference count checking and accessor functions

Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCES

perf dso: Add reference count checking and accessor functions

Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.

The majority of the change is mechanical in nature and not easy to
split up.

Committer testing:

'perf test' up to this patch shows no regressions.

But:

util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....

This was updated:

- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);

But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).

Add the missing argument:

symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);

Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahelenia Ziemiańska <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dima Kogan <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Make sure to call symbol__annotate2() in TUI

The symbol__annotate2() initializes some data structures needed by TUI.
It has a logic to prevent calling it multiple times by checking if

perf annotate: Make sure to call symbol__annotate2() in TUI

The symbol__annotate2() initializes some data structures needed by TUI.
It has a logic to prevent calling it multiple times by checking if it
has the annotated source. But data type profiling uses a different
code (symbol__annotate) to allocate the annotated lines in advance.
So TUI missed to call symbol__annotate2() when it shows the annotation
browser.

Make symbol__annotate() reentrant and handle that situation properly.
This fixes a crash in the annotation browser started by perf report in
TUI like below.

$ perf report -s type,sym --tui
# and press 'a' key and then move down

Fixes: 81e57deec325 ("perf report: Support data type profiling")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

perf annotate: Move 'max_jump_sources' struct to 'struct annotated_source'

It's only used in 'perf annotate' output which means functions with actual
samples. No need to consume memory for every sy

perf annotate: Move 'max_jump_sources' struct to 'struct annotated_source'

It's only used in 'perf annotate' output which means functions with actual
samples. No need to consume memory for every symbol ('struct annotation').

Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Move 'widths' struct to 'struct annotated_source'

It's only used in 'perf annotate' output which means functions with
actual samples. No need to consume memory for every symbol
('str

perf annotate: Move 'widths' struct to 'struct annotated_source'

It's only used in 'perf annotate' output which means functions with
actual samples. No need to consume memory for every symbol
('struct annotation').

Also move the 'max_line_len' field into it as it's related.

Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Get rid of offsets array

The struct annotated_source.offsets[] is to save pointers to
annotation_line at each offset. We can use annotated_source__get_line()
helper instead so let's

perf annotate: Get rid of offsets array

The struct annotated_source.offsets[] is to save pointers to
annotation_line at each offset. We can use annotated_source__get_line()
helper instead so let's get rid of the array.

Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Introduce annotated_source__get_line()

It's a helper function to get annotation_line at the given offset
without using the offsets array. The goal is to get rid of the
offsets array

perf annotate: Introduce annotated_source__get_line()

It's a helper function to get annotation_line at the given offset
without using the offsets array. The goal is to get rid of the
offsets array altogether. It just does the linear search but I
think it's better to save memory as it won't be called in a hot
path.

Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf TUI: Don't ignore job control

In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().

A

perf TUI: Don't ignore job control

In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().

Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.

The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.

Signed-off-by: Ahelenia Ziemiańska <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: yaowenbin <[email protected]>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Remove remaining usages of local annotation options

So that it can get rid of the unused data.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <namhyung@kern

perf annotate: Remove remaining usages of local annotation options

So that it can get rid of the unused data.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf ui/browser/annotate: Use global annotation_options

Now it can use the global options and no need save local browser
options separately.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-

perf ui/browser/annotate: Use global annotation_options

Now it can use the global options and no need save local browser
options separately.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Use global annotation_options

Now it can directly use the global options and no need to pass it as an
argument.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung K

perf annotate: Use global annotation_options

Now it can directly use the global options and no need to pass it as an
argument.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Fixup build with GTK2=1 ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Move offsets array from 'struct annotation' to 'struct annotated_source'

The offsets array keeps pointers to 'struct annotation_line' entries
which are available in the 'struct annota

perf annotate: Move offsets array from 'struct annotation' to 'struct annotated_source'

The offsets array keeps pointers to 'struct annotation_line' entries
which are available in the 'struct annotated_source'. Let's move it to
there.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Move some source code related fields from 'struct annotation' to 'struct annotated_source'

Some fields in the 'struct annotation' are only used with 'struct
annotated_source' so bette

perf annotate: Move some source code related fields from 'struct annotation' to 'struct annotated_source'

Some fields in the 'struct annotation' are only used with 'struct
annotated_source' so better to be moved there in order to reduce memory
consumption for other symbols.

Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Split branch stack cycles information out of 'struct annotation_line'

The cycles info is used only when branch stack is provided. Separate
them from 'struct annotation_line' into a s

perf annotate: Split branch stack cycles information out of 'struct annotation_line'

The cycles info is used only when branch stack is provided. Separate
them from 'struct annotation_line' into a separate struct and lazy
allocate them to save some memory.

Committer notes:

Make annotation__compute_ipc() check if the lazy allocation works,
bailing out if so, its callers already do error checking and
propagation.

Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotation: Switch lock from a mutex to a sharded_mutex

Remove the "struct mutex lock" variable from annotation that is
allocated per symbol. This removes in the region of 40 bytes per
symbol a

perf annotation: Switch lock from a mutex to a sharded_mutex

Remove the "struct mutex lock" variable from annotation that is
allocated per symbol. This removes in the region of 40 bytes per
symbol allocation. Use a sharded mutex where the number of shards is
set to the number of CPUs. Assuming good hashing of the annotation
(done based on the pointer), this means in order to contend there
needs to be more threads than CPUs, which is not currently true in any
perf command. Were contention an issue it is straightforward to
increase the number of shards in the mutex.

On my Debian/glibc based machine, this reduces the size of struct
annotation from 136 bytes to 96 bytes, or nearly 30%.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Andres Freund <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Yuan Can <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>

show more ...

perf annotate browser: Add '<' and '>' keys for navigation

hists__find_annotations() allows to move to next or previous symbols for
annotation using the arrow keys. But TUI annotate_browser__run()

perf annotate browser: Add '<' and '>' keys for navigation

hists__find_annotations() allows to move to next or previous symbols for
annotation using the arrow keys. But TUI annotate_browser__run() uses
the RIGHT key as ENTER to handle jump/call instructions. That makes the
navigation to the next function impossible.

I'd like to change it back to move the next symbol but I'm afraid if
some users get confused. So I added a new pair of keys to handle that.

Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf map: Add accessor for dso

Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check

perf map: Add accessor for dso

Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check is only necessary in one place.

Additional changes:
- add a dso variable to avoid repeated map__dso calls.
- in builtin-mem.c dump_raw_samples, code only partially tested for
dso == NULL. Make the possibility of NULL consistent.
- in thread.c thread__memcpy fix use of spaces and use tabs.

Committer notes:

Did missing conversions on these files:

tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/gtk/annotate.c
tools/perf/util/cs-etm.c
tools/perf/util/thread.c
tools/perf/util/unwind-libunwind-local.c
tools/perf/util/unwind-libunwind.c

Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Remove unused struct disasm_line_samples

After commit 3ab6db8d0f3b ("perf annotate browser: Use samples data from
struct annotation_line"), no one use struct disasm_line_samples, so
r

perf annotate: Remove unused struct disasm_line_samples

After commit 3ab6db8d0f3b ("perf annotate browser: Use samples data from
struct annotation_line"), no one use struct disasm_line_samples, so
remove it.

Signed-off-by: Yuan Can <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Toggle full address <-> offset display

Handle 'f' key to toggle the display offset and full address. Obviously
it only works when users set to see disassembler output ('o' key). It'

perf annotate: Toggle full address <-> offset display

Handle 'f' key to toggle the display offset and full address. Obviously
it only works when users set to see disassembler output ('o' key). It'd
be useful when users want to see the full virtual address in the TUI
annotate browser.

Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Update use of pthread mutex

Switch to the use of mutex wrappers that provide better error checking.

Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Adrian Hunter <adrian.

perf annotate: Update use of pthread mutex

Switch to the use of mutex wrappers that provide better error checking.

Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Truong <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andres Freund <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dario Petrillo <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: Hewenliang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Pavithra Gurushankar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Remi Bernon <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: Weiguo Li <[email protected]>
Cc: Wenyu Liu <[email protected]>
Cc: William Cohen <[email protected]>
Cc: Zechuan Chen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: yaowenbin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf ui: Update use of pthread mutex

Switch to the use of mutex wrappers that provide better error checking.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]

perf ui: Update use of pthread mutex

Switch to the use of mutex wrappers that provide better error checking.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Truong <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andres Freund <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dario Petrillo <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: Hewenliang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Pavithra Gurushankar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Remi Bernon <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: Weiguo Li <[email protected]>
Cc: Wenyu Liu <[email protected]>
Cc: William Cohen <[email protected]>
Cc: Zechuan Chen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: yaowenbin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Avoid TUI crash when navigating in the annotation of recursive functions

In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through s

perf annotate: Avoid TUI crash when navigating in the annotation of recursive functions

In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through some other function) results in
calling symbol__annotate2 multiple() times, and freeing the whole
disassembly when exiting from the innermost instance.

The first issue causes the function's disassembly to be duplicated, and
the latter a heap use-after-free (and crash) when trying to access the
disassembly again.

I reproduced the bug on perf 5.11.22 (Ubuntu 20.04.3 LTS) and 5.16.rc8
with the following testcase (compile with gcc recursive.c -o recursive).
To reproduce:

- perf record ./recursive
- perf report
- enter fibonacci and annotate it
- move the cursor on one of the "callq fibonacci" instructions and press enter
- at this point there will be two copies of the function in the disassembly
- go back by pressing q, and perf will crash

#include <stdio.h>

int fibonacci(int n)
{
if(n <= 2) return 1;
return fibonacci(n-1) + fibonacci(n-2);
}

int main()
{
printf("%d\n", fibonacci(40));
}

This patch addresses the issue by annotating a function and freeing the
associated memory on exit only if no annotation is already present, so
that a recursive function is only annotated on entry.

Signed-off-by: Dario Petrillo <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf annotate: Fix fused instr logic for assembly functions

Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such val

perf annotate: Fix fused instr logic for assembly functions

Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.

When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.

The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.

Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.

Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax

After:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ ┌──cmp %rcx,0x88(%rsp)
│ │je .Lerror_bad_iret
0.14 │ ├──je b4
│ │movl %ecx, %eax

Reviewed-by: Jin Yao <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...