rtc: pcf50633: Remove

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

S

rtc: pcf50633: Remove

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: RTC_DRV_SPEAR should not default to y when compile-testing

Merely enabling compile-testing should not enable additional
functionality.

Signed-off-by: Geert Uytterhoeven <[email protected]

rtc: RTC_DRV_SPEAR should not default to y when compile-testing

Merely enabling compile-testing should not enable additional
functionality.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/7b8eefe3b0150101ba01c3ea55e45aa3134059ba.1733243007.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: support for the Amlogic on-chip RTC

This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm fu

rtc: support for the Amlogic on-chip RTC

This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm function. But the existing has only timing function, alarm
function is using the system clock to implement a virtual alarm. Add
the RTC driver to support it.

Signed-off-by: Yiting Deng <[email protected]>
Signed-off-by: Xianwei Zhao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: add driver for Marvell 88PM886 PMIC RTC

RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the sams

rtc: add driver for Marvell 88PM886 PMIC RTC

RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.

Signed-off-by: Karel Balej <[email protected]>
Acked-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: pcf8563: Switch to regmap

Switch the i2c_transfer methods to regmap APIs.

Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Link: https://lore.kernel.org/r/20241010084949.3351182-3-iwama

rtc: pcf8563: Switch to regmap

Switch the i2c_transfer methods to regmap APIs.

Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC

The RTC IP (RTCA-3) available on the Renesas RZ/G3S SoC has calendar count
mode and binary count mode (selectable though RCR

rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC

The RTC IP (RTCA-3) available on the Renesas RZ/G3S SoC has calendar count
mode and binary count mode (selectable though RCR2.CNTMD) capabilities,
alarm capabilities, clock error correction capabilities. It can generate
alarm, period, carry interrupts.

Add a driver for RTCA-3 IP. The driver implements calendar count mode (as
the conversion b/w RTC and system time is simpler, done with bcd2bin(),
bin2bcd()), read and set time, read and set alarm, read and set
an offset.

Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Add driver for SD2405AL

Add support for the DFRobot SD2405AL I2C RTC Module.

Datasheet:
https://image.dfrobot.com/image/data/TOY0021/SD2405AL%20datasheet%20(Angelo%20v0.1).pdf

Product:
http

rtc: Add driver for SD2405AL

Add support for the DFRobot SD2405AL I2C RTC Module.

Datasheet:
https://image.dfrobot.com/image/data/TOY0021/SD2405AL%20datasheet%20(Angelo%20v0.1).pdf

Product:
https://www.dfrobot.com/product-1600.html

To instantiate (assuming device is connected to I2C-1)
as root:
echo sd2405al 0x32 > /sys/bus/i2c/devices/i2c-1/new_device
as user:
echo 'sd2405al 0x32' | sudo tee /sys/class/i2c-adapter/i2c-1/new_device

The driver is tested with:
+ hwclock
+ tools/testing/selftests/rtc/setdate
+ tools/testing/selftests/rtc/rtctest

Reviewed-by: Csókás Bence <[email protected]>
Signed-off-by: Tóth János <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: support i.MX95 BBM RTC

The BBM module provides RTC feature. To i.MX95, this module is managed by
System Manager and exported System Control Management Interface(SCMI).
Linux could use i.MX SCMI

rtc: support i.MX95 BBM RTC

The BBM module provides RTC feature. To i.MX95, this module is managed by
System Manager and exported System Control Management Interface(SCMI).
Linux could use i.MX SCMI BBM Extension protocol to use RTC feature.

This driver is to use SCMI interface to get/set RTC.

Reviewed-by: Cristian Marussi <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Message-Id: <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>

show more ...

rtc: stm32: add Low Speed Clock Output (LSCO) support

RTC is able to output on a pin the "LSE" internal clock.

STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that mean

rtc: stm32: add Low Speed Clock Output (LSCO) support

RTC is able to output on a pin the "LSE" internal clock.

STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that means RTC_LSCO is output on either
RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property.
The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because
RTC_LSCO can be early required by devices needed it to init.

Add LSCO in pinmux functions.

Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup"
power domain, it is not reset during shutdown or reboot. So force LSCO
disable at probe.

Co-developed-by: Amelie Delaunay <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Signed-off-by: Valentin Caron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: stm32: add pinctrl and pinmux interfaces

STM32 RTC is capable to handle 3 specific pins of the soc.
"out1, out2 and out2_rmp". To handle this, we use pinctrl framework.
There is a single pin pe

rtc: stm32: add pinctrl and pinmux interfaces

STM32 RTC is capable to handle 3 specific pins of the soc.
"out1, out2 and out2_rmp". To handle this, we use pinctrl framework.
There is a single pin per group.

Signed-off-by: Valentin Caron <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Add driver for Epson RX8111

Epson RX8111 is an RTC with alarm, timer and timestamp functionality.
Add a basic driver with support for only reading/writing time (for now).

Signed-off-by: Waqar

rtc: Add driver for Epson RX8111

Epson RX8111 is an RTC with alarm, timer and timestamp functionality.
Add a basic driver with support for only reading/writing time (for now).

Signed-off-by: Waqar Hameed <[email protected]>
Link: https://lore.kernel.org/r/0c3e1b03f276da47b26ac50f5d0ddf5c67aabe5c.1700491765.git.waqar.hameed@axis.com
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: mt6397: select IRQ_DOMAIN instead of depending on it

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of d

rtc: mt6397: select IRQ_DOMAIN instead of depending on it

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <[email protected]>
Cc: Eddie Huang <[email protected]>
Cc: Sean Wang <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: [email protected]
Cc: Marc Zyngier <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Peter Rosin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: max31335: add driver support

RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
Integrated MEMS Resonator.

Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Antoniu Mic

rtc: max31335: add driver support

RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
Integrated MEMS Resonator.

Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Antoniu Miclaus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: lpc24xx: add missing dependency

The driver depends on COMMON_CLK. Add the dependency in Kconfig.

Signed-off-by: Antoniu Miclaus <[email protected]>
Link: https://lore.kernel.org/r/202

rtc: lpc24xx: add missing dependency

The driver depends on COMMON_CLK. Add the dependency in Kconfig.

Signed-off-by: Antoniu Miclaus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: tps6594: Add driver for TPS6594 RTC

TPS6594 PMIC is a MFD. This patch adds support for
the RTC found inside TPS6594 family of PMIC.

Alarm is also supported.

Signed-off-by: Esteban Blanc <ebla

rtc: tps6594: Add driver for TPS6594 RTC

TPS6594 PMIC is a MFD. This patch adds support for
the RTC found inside TPS6594 family of PMIC.

Alarm is also supported.

Signed-off-by: Esteban Blanc <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Tested-by: Thomas Richard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Add driver for Nuvoton ma35d1 rtc controller

The ma35d1 rtc controller provides real-time and calendar messaging
capabilities. It supports programmable time tick and alarm match
interrupts. The

rtc: Add driver for Nuvoton ma35d1 rtc controller

The ma35d1 rtc controller provides real-time and calendar messaging
capabilities. It supports programmable time tick and alarm match
interrupts. The time and calendar messages are expressed in BCD format.
This driver supports the built-in rtc controller of the ma35d1. It
enables setting and reading the rtc time and configuring and reading
the rtc alarm.

Signed-off-by: Jacky Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Add support for the SSD202D RTC

Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of
running while the system is sleeping (battery powered), this is not the
case with the other RT

rtc: Add support for the SSD202D RTC

Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of
running while the system is sleeping (battery powered), this is not the
case with the other RTC on older SoCs. This adds basic support for this
RTC block.

Signed-off-by: Romain Perier <[email protected]>
Co-developed-by: Daniel Palmer <[email protected]>
Signed-off-by: Daniel Palmer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: imxdi: Soften dependencies for improved compile coverage

The driver compiles fine on x86_64, so soften the dependencies to
ARCH_MXC || COMPILE_TEST.

Signed-off-by: Uwe Kleine-König <u.kleine-k

rtc: imxdi: Soften dependencies for improved compile coverage

The driver compiles fine on x86_64, so soften the dependencies to
ARCH_MXC || COMPILE_TEST.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: bq4802: add sparc dependency

The added HAS_IOPORT dependency might not actually be necessary as Geert
points out, but the driver is also only used on one architecture. Sparc
is also a special c

rtc: bq4802: add sparc dependency

The added HAS_IOPORT dependency might not actually be necessary as Geert
points out, but the driver is also only used on one architecture. Sparc
is also a special case here since it converts port numbers into virtual
addresses rather than having them mapped into a particular part of the
__iomem address space, so the difference is actually not important here.

Add a dependency on sparc, but allow compile-testing otherwise, to
make this clearer without anyone having to spend much time modernizing
the driver beyond that.

Reported-by: Geert Uytterhoeven <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/all/CAMuHMdWEx0F=fNei4Bz_JPkuvoaN-+zk08h0i8KnSi_VjO615g@mail.gmail.com/
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: pcf2127: add support for PCF2131 RTC

This RTC is very similar in functionality to the PCF2127/29.

Basically it:
-supports two new control registers at offsets 4 and 5
-supports a new reset

rtc: pcf2127: add support for PCF2131 RTC

This RTC is very similar in functionality to the PCF2127/29.

Basically it:
-supports two new control registers at offsets 4 and 5
-supports a new reset register (not implemented in this driver)
-supports 4 tamper detection functions instead of 1
-has no nvmem (like the PCF2129)
-has two output interrupt pins

Because of that, most of the register addresses are very different,
although they still follow the same layout. For example, the tamper
registers have a different base address, but the offsets are all the same.

Signed-off-by: Hugo Villeneuve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Add rtc driver for the Loongson family chips

The Loongson family chips use an on-chip counter 0 (Time Of Year
counter) as the RTC. We will refer to them as rtc-loongson.

Cc: Keguang Zhang <keg

rtc: Add rtc driver for the Loongson family chips

The Loongson family chips use an on-chip counter 0 (Time Of Year
counter) as the RTC. We will refer to them as rtc-loongson.

Cc: Keguang Zhang <[email protected]>
Cc: Yang Ling <[email protected]>
Cc: Jiaxun Yang <[email protected]>
Signed-off-by: Binbin Zhou <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: WANG Xuerui <[email protected]>
Reviewed-by: Keguang Zhang <[email protected]>
Tested-by: Keguang Zhang <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
Tested-by: Jiaxun Yang <[email protected]> # LS7A
Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: Remove the Loongson-1 RTC driver

Remove the ls1x-rtc driver as it is obsolete. We will continue to
support the ls1x RTC in the upcoming Loongson unified RTC driver
rtc-loongson.

Cc: Keguang Zh

rtc: Remove the Loongson-1 RTC driver

Remove the ls1x-rtc driver as it is obsolete. We will continue to
support the ls1x RTC in the upcoming Loongson unified RTC driver
rtc-loongson.

Cc: Keguang Zhang <[email protected]>
Cc: zhao zhang <[email protected]>
Cc: Yang Ling <[email protected]>
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Keguang Zhang <[email protected]>
Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: add HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

rtc: add HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
Acked-by: Maciej W. Rozycki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <[email protected]> # for RTC
Tested-by: Diederik

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <[email protected]> # for RTC
Tested-by: Diederik de Haas <[email protected]> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <[email protected]> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE

As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the M

rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE

As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
RTC driver to use the new symbol.

Signed-off-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...