drm/sun4i: Run DRM default client setup

Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common

drm/sun4i: Run DRM default client setup

Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.

The sun4i driver specifies as preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.

v5:
- select DRM_CLIENT_SELECTION

Signed-off-by: Thomas Zimmermann <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Cc: Samuel Holland <[email protected]>
Acked-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: hdmi: Switch to HDMI connector

The new HDMI connector infrastructure allows to remove some boilerplate,
especially to generate infoframes. Let's switch to it.

Reviewed-by: Jernej Skrabec

drm/sun4i: hdmi: Switch to HDMI connector

The new HDMI connector infrastructure allows to remove some boilerplate,
especially to generate infoframes. Let's switch to it.

Reviewed-by: Jernej Skrabec <[email protected]>
Acked-by: Sui Jingfeng <[email protected]>
Reviewed-by: Andy Yan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Make drivers depends on DRM_DW_HDMI"

This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenie

Revert "drm: Make drivers depends on DRM_DW_HDMI"

This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Make drivers depends on DRM_DW_HDMI

DRM_DW_HDMI has a number of dependencies that might not be enabled.
However, drivers were used to selecting it while not enforcing the
DRM_DW_HDMI dependenci

drm: Make drivers depends on DRM_DW_HDMI

DRM_DW_HDMI has a number of dependencies that might not be enabled.
However, drivers were used to selecting it while not enforcing the
DRM_DW_HDMI dependencies.

This could result in Kconfig warnings (and further build breakages) such
as:

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DRM_DW_HDMI
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && DRM_DISPLAY_HELPER [=n]
Selected by [m]:
- DRM_SUN8I_DW_HDMI [=m] && HAS_IOMEM [=y] && DRM_SUN4I [=m]

Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Acked-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be mor

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: Update Kconfig defaults and descriptions

Allwinner display drivers are split roughly into two generations. The
first generation was found on early 32-bit ARM SoCs and contains DE1.0
and a

drm/sun4i: Update Kconfig defaults and descriptions

Allwinner display drivers are split roughly into two generations. The
first generation was found on early 32-bit ARM SoCs and contains DE1.0
and a custom HDMI controller. Clarify that these options only apply to
a specific list of SoCs, and limit selecting them to 32-bit ARM, to
avoid confusion.

The second generation, found in A83T and newer SoCs (both 32-bit and
64-bit), contains a DE2.0 and a DesignWare HDMI controller. Since this
is the most widely-used generation, enable it by default. The previous
default condition (MACH_SUN8I) was limited to 32-bit SoCs. Also enable
the DSI controller by default, which is found on 64-bit SoCs as well.

Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: Allow building the driver on RISC-V

Allwinner D1 is a RISC-V SoC which contains a DE 2.0 engine. Let's
remove the dependency on a specific CPU architecture, so the driver can
be built whe

drm/sun4i: Allow building the driver on RISC-V

Allwinner D1 is a RISC-V SoC which contains a DE 2.0 engine. Let's
remove the dependency on a specific CPU architecture, so the driver can
be built wherever ARCH_SUNXI is selected.

Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS help

drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.

Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING:

drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n]
Selected by [y]:
- DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY
without selecting or depending on RESET_CONTROLLER, despite
PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

v2:
Fixed indentation to match the rest of the file.

Signed-off-by: Julian Braha <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzyszt

drm/sun4i: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

phy: Move Allwinner A31 D-PHY driver to drivers/phy/

Now that our MIPI D-PHY driver has been converted to the phy framework,
let's move it into the drivers/phy directory.

Reviewed-by: Paul Kocialko

phy: Move Allwinner A31 D-PHY driver to drivers/phy/

Now that our MIPI D-PHY driver has been converted to the phy framework,
let's move it into the drivers/phy directory.

Reviewed-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com

show more ...

sun6i: dsi: Convert to generic phy handling

Now that we have everything in place in the PHY framework to deal in a
generic way with MIPI D-PHY phys, let's convert our PHY driver and its
associated D

sun6i: dsi: Convert to generic phy handling

Now that we have everything in place in the PHY framework to deal in a
generic way with MIPI D-PHY phys, let's convert our PHY driver and its
associated DSI driver to that new API.

Reviewed-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/dc6450e2978b6dafcc464595ad06204d22d2658f.1548085432.git-series.maxime.ripard@bootlin.com

show more ...

drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m

Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tco

drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m

Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:

ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun8i-drm-hdmi.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!

This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.

Fixes: 57e23de02f48 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Fixes: ef0cf6441fbb ("drm/sun4i: Add support for traversing graph with TCON TOP")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: Add Allwinner A31 MIPI-DSI controller support

Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.

While that controller is mostly undocumented, the code is out t

drm/sun4i: Add Allwinner A31 MIPI-DSI controller support

Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.

While that controller is mostly undocumented, the code is out there and has
been cleaned up in order to be integrated into DRM. However, there's still
some dark areas that are a bit unclear about how the block exactly
operates.

Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com

show more ...

drm/sun4i: Allow building on arm64

64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which
is compatible to 32-bit SoCs, so allow building DRM driver for
arm64 architecture.

Signed-off-by

drm/sun4i: Allow building on arm64

64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which
is compatible to 32-bit SoCs, so allow building DRM driver for
arm64 architecture.

Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: Implement A83T HDMI driver

A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.

Only video output was tested, while HW also supports audio and CEC.
Support for

drm/sun4i: Implement A83T HDMI driver

A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.

Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.

Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/sun4i: cec: Enable back CEC-pin framework

Now that the cec-pin framework has been merged, we can remove the safeguard
that were preventing the CEC part of the sun4i HDMI driver and actually
star

drm/sun4i: cec: Enable back CEC-pin framework

Now that the cec-pin framework has been merged, we can remove the safeguard
that were preventing the CEC part of the sun4i HDMI driver and actually
start to use it.

Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

sun4i_hdmi: add CEC support

Add HDMI CEC support to the Allwinner A10 SoC.

This SoC uses a poor-man's CEC implementation by polling the CEC pin. It is
using the CEC_PIN core implementation for such

sun4i_hdmi: add CEC support

Add HDMI CEC support to the Allwinner A10 SoC.

This SoC uses a poor-man's CEC implementation by polling the CEC pin. It is
using the CEC_PIN core implementation for such devices to do the heavy
lifting. It just provides the callbacks to read/drive the CEC pin.

Signed-off-by: Hans Verkuil <[email protected]>
Tested-by: Maxime Ripard <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/sun4i: Add if statement instead of depends on

The depends on relationship is obvious, and using an if statement will
propagate it to every option without the need for each and every one of
them

drm/sun4i: Add if statement instead of depends on

The depends on relationship is obvious, and using an if statement will
propagate it to every option without the need for each and every one of
them to define it.

Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/sun4i: Add HDMI support

The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.

That HDMI controller is able to do audio and CEC, but those have been left
out for now

drm/sun4i: Add HDMI support

The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.

That HDMI controller is able to do audio and CEC, but those have been left
out for now.

Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/sun4i: add support for Allwinner DE2 mixers

Allwinner have a new "Display Engine 2.0" in their new SoCs, which comes
with mixers to do graphic processing and feed data to TCON, like the old
back

drm/sun4i: add support for Allwinner DE2 mixers

Allwinner have a new "Display Engine 2.0" in their new SoCs, which comes
with mixers to do graphic processing and feed data to TCON, like the old
backends and frontends.

Add support for the mixer on Allwinner V3s SoC; it's the simplest one.

Currently a lot of functions are still missing -- more investigations
are needed to gain enough information for them.

Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/sun4i: add a Kconfig option for sun4i-backend

As sun4i-backend is now a dedicated module, add an Kconfig option for
it to make it optional, since some build may only use other engines.

Signed-o

drm/sun4i: add a Kconfig option for sun4i-backend

As sun4i-backend is now a dedicated module, add an Kconfig option for
it to make it optional, since some build may only use other engines.

Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/sun4i: add COMMON_CLK dependency

The sun4i drm driver uses the clk-provider interfaces, which are not available
when CONFIG_COMMON_CLK is disabled:

drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16:

drm/sun4i: add COMMON_CLK dependency

The sun4i drm driver uses the clk-provider interfaces, which are not available
when CONFIG_COMMON_CLK is disabled:

drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16: error: field 'hw' has incomplete type
struct clk_hw hw;
In file included from ../include/asm-generic/bug.h:13:0,
from ../arch/arm/include/asm/bug.h:59,
from ../include/linux/bug.h:4,
from ../include/linux/io.h:23,
from ../include/linux/clk-provider.h:14,
from ../drivers/gpu/drm/sun4i/sun4i_dotclock.c:13:
drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'hw_to_dclk':
include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
...

This adds a Kconfig dependency to prevent the driver from being enabled
in this case.

Signed-off-by: Arnd Bergmann <[email protected]>
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Add Allwinner A10 Display Engine support

The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of

drm: Add Allwinner A10 Display Engine support

The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.

Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually

Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>

show more ...