openrisc: Add support for restartable sequences

Implement support for restartable sequences on OpenRISC by doing:
- Select HAVE_RSEQ in Kconfig
- Call rseq_syscall() on return to userspace when CO

openrisc: Add support for restartable sequences

Implement support for restartable sequences on OpenRISC by doing:
- Select HAVE_RSEQ in Kconfig
- Call rseq_syscall() on return to userspace when CONFIG_DEBUG_RSEQ
is enabled.
- Call rseq_signal_deliver() to fixup the pre-signal stack frame when a
signal is delivered on top of a restartable sequence critical section

Cc: Michael Jeanson <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>

show more ...

openrisc: Add HAVE_REGS_AND_STACK_ACCESS_API support

Support for HAVE_REGS_AND_STACK_ACCESS_API needed for restartable
sequences.

The implementation has been copied from riscv and tested with the
r

openrisc: Add HAVE_REGS_AND_STACK_ACCESS_API support

Support for HAVE_REGS_AND_STACK_ACCESS_API needed for restartable
sequences.

The implementation has been copied from riscv and tested with the
restartable sequences self tests.

Note, pt-regs members are 'long' on openrisc which require casts for the
api, someday we should try to update these to be 'unsigned long' as
that's what they really are.

Signed-off-by: Michael Jeanson <[email protected]>
[stafford: Updated commit message]
Signed-off-by: Stafford Horne <[email protected]>

show more ...

openrisc: migrate to the generic rule for built-in DTB

Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTI

openrisc: migrate to the generic rule for built-in DTB

Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTIN_DTB to use the generic rule.

To keep consistency across architectures, this commit also renames
CONFIG_OPENRISC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME.

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>

show more ...

openrisc: Implement fixmap to fix earlycon

With commit 53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap
code") it was commented that early ioremap was not used in OpenRISC. I
acked this b

openrisc: Implement fixmap to fix earlycon

With commit 53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap
code") it was commented that early ioremap was not used in OpenRISC. I
acked this but was wrong, earlycon was using it. Earlycon setup now
fails with the below trace:

Kernel command line: earlycon
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/ioremap.c:23
generic_ioremap_prot+0x118/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted
6.11.0-rc5-00001-gce02fd891c38-dirty #141
Call trace:
[<(ptrval)>] dump_stack_lvl+0x7c/0x9c
[<(ptrval)>] dump_stack+0x1c/0x2c
[<(ptrval)>] __warn+0xb4/0x108
[<(ptrval)>] ? generic_ioremap_prot+0x118/0x130
[<(ptrval)>] warn_slowpath_fmt+0x60/0x98
[<(ptrval)>] generic_ioremap_prot+0x118/0x130
[<(ptrval)>] ioremap_prot+0x20/0x30
[<(ptrval)>] of_setup_earlycon+0xd4/0x2e0
[<(ptrval)>] early_init_dt_scan_chosen_stdout+0x18c/0x1c8
[<(ptrval)>] param_setup_earlycon+0x3c/0x60
[<(ptrval)>] do_early_param+0xb0/0x118
[<(ptrval)>] parse_args+0x184/0x4b8
[<(ptrval)>] ? start_kernel+0x0/0x78c
[<(ptrval)>] parse_early_options+0x40/0x50
[<(ptrval)>] ? do_early_param+0x0/0x118
[<(ptrval)>] parse_early_param+0x48/0x68
[<(ptrval)>] ? start_kernel+0x318/0x78c
[<(ptrval)>] ? start_kernel+0x0/0x78c
---[ end trace 0000000000000000 ]---

To fix this we could either implement early_ioremap again or implement
fixmap. In this patch we choose the later option of implementing basic
fixmap support.

While fixing this we also remove the old FIX_IOREMAP slots that were
used by early ioremap code. That code was also removed by commit
53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap code") but
these definitions were not cleaned up.

Fixes: 53c98e35dcbc ("openrisc: mm: remove unneeded early ioremap code")
Signed-off-by: Stafford Horne <[email protected]>

show more ...

openrisc: Add FPU config

Allow disabling FPU related code sequences to save space.

Signed-off-by: Stafford Horne <[email protected]>

arch: define CONFIG_PAGE_SIZE_*KB on all architectures

Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,

arch: define CONFIG_PAGE_SIZE_*KB on all architectures

Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.

Acked-by: Guo Ren <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Acked-by: Stafford Horne <[email protected]>
Acked-by: Johannes Berg <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

openrisc: mm: convert to GENERIC_IOREMAP

By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(),
generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and
iounmap() ar

openrisc: mm: convert to GENERIC_IOREMAP

By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(),
generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and
iounmap() are all visible and available to arch. Arch needs to provide
wrapper functions to override the generic versions if there's arch
specific handling in its ioremap_prot(), ioremap() or iounmap(). This
change will simplify implementation by removing duplicated code with
generic_ioremap_prot() and generic_iounmap(), and has the equivalent
functioality as before.

For openrisc, the current ioremap() and iounmap() are the same as generic
version. After taking GENERIC_IOREMAP way, the old ioremap() and
iounmap() can be completely removed.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Mike Rapoport (IBM) <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: David Laight <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Niklas Schnelle <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

openrisc: Add pci bus support

This patch adds required definitions to allow for PCI buses on OpenRISC.
This is being tested on the OpenRISC QEMU virt platform which is in
development.

OpenRISC does

openrisc: Add pci bus support

This patch adds required definitions to allow for PCI buses on OpenRISC.
This is being tested on the OpenRISC QEMU virt platform which is in
development.

OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMIT and PIO_RESERVED to be 0.

Note, since commit 66bcd06099bb ("parport_pc: Also enable driver for PCI
systems") all platforms that support PCI also need to support parallel
port. We add a generic header to support compiling parallel port
drivers, though they generally will not work as they require IO ports.

Signed-off-by: Stafford Horne <[email protected]>

show more ...

mm/mmap: drop ARCH_HAS_VM_GET_PAGE_PROT

Now all the platforms enable ARCH_HAS_GET_PAGE_PROT. They define and
export own vm_get_page_prot() whether custom or standard
DECLARE_VM_GET_PAGE_PROT. Henc

mm/mmap: drop ARCH_HAS_VM_GET_PAGE_PROT

Now all the platforms enable ARCH_HAS_GET_PAGE_PROT. They define and
export own vm_get_page_prot() whether custom or standard
DECLARE_VM_GET_PAGE_PROT. Hence there is no need for default generic
fallback for vm_get_page_prot(). Just drop this fallback and also
ARCH_HAS_GET_PAGE_PROT mechanism.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

openrisc/mm: enable ARCH_HAS_VM_GET_PAGE_PROT

This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports
standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT,
which looks

openrisc/mm: enable ARCH_HAS_VM_GET_PAGE_PROT

This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports
standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT,
which looks up a private and static protection_map[] array. Subsequently
all __SXXX and __PXXX macros can be dropped which are no longer needed.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Acked-by: Stafford Horne <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

openrisc: Add gcc machine instruction flag configuration

OpenRISC GCC supports flags to enable the backend to output instructions
if they are supported by a target processor. This patch adds
config

openrisc: Add gcc machine instruction flag configuration

OpenRISC GCC supports flags to enable the backend to output instructions
if they are supported by a target processor. This patch adds
configuration flags to enable configuring these flags to tune the kernel
for a particular CPU configuration.

In the future we could also enable all of these flags by default and
provide instruction emulation in the kernel to make these choices easier
for users but this is what we provide for now.

Signed-off-by: Stafford Horne <[email protected]>

show more ...

openrisc: Move to ticket-spinlock

We have no indications that openrisc meets the qspinlock requirements,
so move to ticket-spinlock as that is more likey to be correct.

Signed-off-by: Peter Zijlstr

openrisc: Move to ticket-spinlock

We have no indications that openrisc meets the qspinlock requirements,
so move to ticket-spinlock as that is more likey to be correct.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Stafford Horne <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

uaccess: remove CONFIG_SET_FS

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok()

uaccess: remove CONFIG_SET_FS

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok() into a cheaper check against TASK_SIZE_MAX.

As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().

Acked-by: Sam Ravnborg <[email protected]> # for sparc32 changes
Acked-by: "Eric W. Biederman" <[email protected]>
Tested-by: Sergey Matyukevich <[email protected]> # for arc changes
Acked-by: Stafford Horne <[email protected]> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

openrisc: init: Add support for common clk

When testing the new litex_mmc driver it was found to not work on
OpenRISC due to missing support for common clk. This patch does the
basic initialization

openrisc: init: Add support for common clk

When testing the new litex_mmc driver it was found to not work on
OpenRISC due to missing support for common clk. This patch does the
basic initialization to allow OpenRISC to use the common clk framework.

Signed-off-by: Stafford Horne <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>

show more ...

irq: remove handle_domain_{irq,nmi}()

Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), an

irq: remove handle_domain_{irq,nmi}()

Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), and there's no functional reason for it to
call handle_domain_irq().

Let's cement this split of responsibility and remove handle_domain_irq()
entirely, updating irqchip drivers to call generic_handle_domain_irq().

For consistency, handle_domain_nmi() is similarly removed and replaced
with a generic_handle_domain_nmi() function which also does not perform
any entry logic.

Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire
when they were called in an inappropriate context. So that we can
identify similar issues going forward, similar WARN_ON_ONCE() logic is
added to the generic_handle_*() functions, and comments are updated for
clarity and consistency.

Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Thomas Gleixner <[email protected]>

show more ...

irq: openrisc: perform irqentry in entry code

In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have
arch/openrisc perform all the irqentry accounting in its entry code. As
arch/openrisc uses

irq: openrisc: perform irqentry in entry code

In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have
arch/openrisc perform all the irqentry accounting in its entry code. As
arch/openrisc uses GENERIC_IRQ_MULTI_HANDLER, we can use
generic_handle_arch_irq() to do so.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Reviewed-by: Stafford Horne <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Thomas Gleixner <[email protected]>

show more ...

irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY

Going forward we want architecture/entry code to perform all the
necessary work to enter/exit IRQ context, with irqchip code merely
handling

irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY

Going forward we want architecture/entry code to perform all the
necessary work to enter/exit IRQ context, with irqchip code merely
handling the mapping of the interrupt to any handler(s). Among other
reasons, this is necessary to consistently fix some longstanding issues
with the ordering of lockdep/RCU/tracing instrumentation which many
architectures get wrong today in their entry code.

Importantly, rcu_irq_{enter,exit}() must be called precisely once per
IRQ exception, so that rcu_is_cpu_rrupt_from_idle() can correctly
identify when an interrupt was taken from an idle context which must be
explicitly preempted. Currently handle_domain_irq() calls
rcu_irq_{enter,exit}() via irq_{enter,exit}(), but entry code needs to
be able to call rcu_irq_{enter,exit}() earlier for correct ordering
across lockdep/RCU/tracing updates for sequences such as:

lockdep_hardirqs_off(CALLER_ADDR0);
rcu_irq_enter();
trace_hardirqs_off_finish();

To permit each architecture to be converted to the new style in turn,
this patch adds a new CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY selected by all
current users of HANDLE_DOMAIN_IRQ, which gates the existing behaviour.
When CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY is not selected,
handle_domain_irq() requires entry code to perform the
irq_{enter,exit}() work, with an explicit check for this matching the
style of handle_domain_nmi().

Subsequent patches will:

1) Add the necessary IRQ entry accounting to each architecture in turn,
dropping CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY from that architecture's
Kconfig.

2) Remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY once it is no longer
selected.

3) Convert irqchip drivers to consistently use
generic_handle_domain_irq() rather than handle_domain_irq().

4) Remove handle_domain_irq() and CONFIG_HANDLE_DOMAIN_IRQ.

... which should leave us with a clear split of responsiblity across the
entry and irqchip code, making it possible to perform additional
cleanups and fixes for the aforementioned longstanding issues with entry
code.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Thomas Gleixner <[email protected]>

show more ...

tracing: Refactor TRACE_IRQFLAGS_SUPPORT in Kconfig

Make architectures select TRACE_IRQFLAGS_SUPPORT instead of
having many defines.

Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@

tracing: Refactor TRACE_IRQFLAGS_SUPPORT in Kconfig

Make architectures select TRACE_IRQFLAGS_SUPPORT instead of
having many defines.

Link: https://lkml.kernel.org/r/[email protected]

Acked-by: Heiko Carstens <[email protected]>
Acked-by: Vineet Gupta <[email protected]>   #arch/arc
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Max Filippov <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols

Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the pola

asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols

Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.

The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.

The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.

Cc: "James E.J. Bottomley" <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Helge Deller <[email protected]> # parisc
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

locking/atomic: delete !ARCH_ATOMIC remnants

Now that all architectures implement ARCH_ATOMIC, we can make it
mandatory, removing the Kconfig symbol and logic for !ARCH_ATOMIC.

There should be no f

locking/atomic: delete !ARCH_ATOMIC remnants

Now that all architectures implement ARCH_ATOMIC, we can make it
mandatory, removing the Kconfig symbol and logic for !ARCH_ATOMIC.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

locking/atomic: openrisc: move to ARCH_ATOMIC

We'd like all architectures to convert to ARCH_ATOMIC, as once all
architectures are converted it will be possible to make significant
cleanups to the a

locking/atomic: openrisc: move to ARCH_ATOMIC

We'd like all architectures to convert to ARCH_ATOMIC, as once all
architectures are converted it will be possible to make significant
cleanups to the atomics headers, and this will make it much easier to
generically enable atomic functionality (e.g. debug logic in the
instrumented wrappers).

As a step towards that, this patch migrates openrisc to ARCH_ATOMIC. The
arch code provides arch_{atomic,atomic64,xchg,cmpxchg}*(), and common
code wraps these with optional instrumentation to provide the regular
functions.

Signed-off-by: Mark Rutland <[email protected]>
Acked-by: Stafford Horne <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

timekeeping: default GENERIC_CLOCKEVENTS to enabled

Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.

Instead, enable it whenever CO

timekeeping: default GENERIC_CLOCKEVENTS to enabled

Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.

Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.

For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.

At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:

text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent

On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.

Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

uaccess: add infrastructure for kernel builds with set_fs()

Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not

uaccess: add infrastructure for kernel builds with set_fs()

Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Al Viro <[email protected]>

show more ...

arch: remove HAVE_COPY_THREAD_TLS

All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same proc

arch: remove HAVE_COPY_THREAD_TLS

All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.

Cc: [email protected]
Acked-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>

show more ...

openrisc: use the generic in-place uncached DMA allocator

Switch openrisc to use the dma-direct allocator and just provide the
hooks for setting memory uncached or cached.

Signed-off-by: Christoph

openrisc: use the generic in-place uncached DMA allocator

Switch openrisc to use the dma-direct allocator and just provide the
hooks for setting memory uncached or cached.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Stafford Horne <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>

show more ...