MIPS: kernel: Clear FPU states when setting up kernel threads

io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
cop

MIPS: kernel: Clear FPU states when setting up kernel threads

io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
copy_thread() didn't clear FPU states for kernel threads a BUG()
is triggered for using FPU inside kernel. Move code around
to always clear FPU state for user and kernel threads.

Cc: [email protected]
Reported-by: Aurelien Jarno <[email protected]>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
Suggested-by: Jiaxun Yang <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

nmi_backtrace: allow excluding an arbitrary CPU

The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a pl

nmi_backtrace: allow excluding an arbitrary CPU

The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a place to allocate a CPU mask just to handle the common case.

Let's extend the API to take a CPU ID to exclude instead of just a
boolean. This isn't any more complex for the API to handle and allows the
hardlockup detector to exclude a different CPU (the one it already did a
trace for) without needing to find space for a CPU mask.

Arguably, this new API also encourages safer behavior. Specifically if
the caller wants to avoid tracing the current CPU (maybe because they
already traced the current CPU) this makes it more obvious to the caller
that they need to make sure that the current CPU ID can't change.

[[email protected]: fix trigger_allbutcpu_cpu_backtrace() stub]
Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid
Signed-off-by: Douglas Anderson <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: Lecopzer Chen <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Pingfan Liu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

sched/idle: Mark arch_cpu_idle_dead() __noreturn

Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexp

sched/idle: Mark arch_cpu_idle_dead() __noreturn

Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.

There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).

Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.

This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.

Also fixes the following warning:

vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction

Reported-by: Paul E. McKenney <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <[email protected]>

show more ...

treewide: use get_random_u32_below() instead of deprecated function

This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)

Reviewed-

treewide: use get_random_u32_below() instead of deprecated function

This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)

Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Darrick J. Wong <[email protected]> # for xfs
Reviewed-by: SeongJae Park <[email protected]> # for damon
Reviewed-by: Jason Gunthorpe <[email protected]> # for infiniband
Reviewed-by: Russell King (Oracle) <[email protected]> # for arm
Acked-by: Ulf Hansson <[email protected]> # for mmc
Signed-off-by: Jason A. Donenfeld <[email protected]>

show more ...

treewide: use prandom_u32_max() when possible, part 1

Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
t

treewide: use prandom_u32_max() when possible, part 1

Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:

@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)

@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@

- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

((T)get_random_u32()@p & (LITERAL))

// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@

- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)

@collapse_ret@
type T;
identifier VAR;
expression E;
@@

{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}

@drop_var@
type T;
identifier VAR;
@@

{
- T VAR;
... when != VAR
}

Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Yury Norov <[email protected]>
Reviewed-by: KP Singh <[email protected]>
Reviewed-by: Jan Kara <[email protected]> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <[email protected]> # for drbd
Acked-by: Jakub Kicinski <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # for s390
Acked-by: Ulf Hansson <[email protected]> # for mmc
Acked-by: Darrick J. Wong <[email protected]> # for xfs
Signed-off-by: Jason A. Donenfeld <[email protected]>

show more ...

fork: Generalize PF_IO_WORKER handling

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any ta

fork: Generalize PF_IO_WORKER handling

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.

The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.

The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

fork: Pass struct kernel_clone_args into copy_thread

With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.

The kernel

fork: Pass struct kernel_clone_args into copy_thread

With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.

The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.

Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.

v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

MIPS: Remove TX39XX support

No (active) developer owns this hardware, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Guenter Roeck <linux@ro

MIPS: Remove TX39XX support

No (active) developer owns this hardware, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Acked-by: Atsushi Nemoto <[email protected]>

show more ...

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zij

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]> [arm]
Tested-by: Mark Rutland <[email protected]> [arm64]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

MIPS: Replace deprecated CPU-hotplug functions.

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cp

MIPS: Replace deprecated CPU-hotplug functions.

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

sched: Introduce task_is_running()

Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Davidl

sched: Introduce task_is_running()

Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

MIPS: Remove get_fs/set_fs

All get_fs/set_fs calls in MIPS code are gone, so remove implementation
of it. With the clear separation of user/kernel space access we no
longer need the EVA special han

MIPS: Remove get_fs/set_fs

All get_fs/set_fs calls in MIPS code are gone, so remove implementation
of it. With the clear separation of user/kernel space access we no
longer need the EVA special handling, so get rid of that, too.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>

show more ...

arch: setup PF_IO_WORKER threads like PF_KTHREAD

PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure

arch: setup PF_IO_WORKER threads like PF_KTHREAD

PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().

Signed-off-by: Jens Axboe <[email protected]>

show more ...

Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"

This reverts commit 9308579fef3ddde19da9d45e23bf36d41932417f.

Signed-off-by: Thomas Bogendoerfer <[email protected]>

MIPS: process: Fix no previous prototype warning

unwind_stack_by_address and unwind_stack need <asm/stacktrace.h>.
arch_align_stack needs <asm/exec.h>

link: https://lists.01.org/hyperkitty/list/kbu

MIPS: process: Fix no previous prototype warning

unwind_stack_by_address and unwind_stack need <asm/stacktrace.h>.
arch_align_stack needs <asm/exec.h>

link: https://lists.01.org/hyperkitty/list/[email protected]/thread/ZPL2RRA6RZKRQZI5IGOVLFXN2GVZBN3L/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jinyang He <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: Add is_jr_ra_ins() to end the loop early

For those leaf functions, they are likely to have no stack operations.
Add is_jr_ra_ins() to determine whether jr ra has been touched before
the frame_

MIPS: Add is_jr_ra_ins() to end the loop early

For those leaf functions, they are likely to have no stack operations.
Add is_jr_ra_ins() to determine whether jr ra has been touched before
the frame_size is found. Without this patch, the get frame_size operation
may be out of range and get the frame_size from the next nested function.

There is no POOL32A format in uapi/asm/inst.h, so some bits here use the
format of r_format instead.
e.g.
---------------------------------------------------------------------
| format | 31:26 | 25:21 | 20:16 | 15:6 | 5:0 |
-----------------+---------+-------+-------+------------+------------
| pool32a_format | pool32a | rt | rs | jalrc | pool32axf |
-----------------+---------+-------+-------+------------+------------
| r_format | opcode | rs | rt | rd:5, re:5 | func |
---------------------------------------------------------------------

Signed-off-by: Jinyang He <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: Fix get_frame_info() handing of function size

[1]: Commit b6c7a324df37b ("MIPS: Fix get_frame_info() handling of
microMIPS function size")
[2]: Commit 2b424cfc69728

MIPS: Fix get_frame_info() handing of function size

[1]: Commit b6c7a324df37b ("MIPS: Fix get_frame_info() handling of
microMIPS function size")
[2]: Commit 2b424cfc69728 ("MIPS: Remove function size check in
get_frame_info()")

First patch added a constant to check the number of iterations against.
Second patch fixed the situation that info->func_size is zero.

However, func_size member became useless after the second commit. Without
ip_end, the get frame_size operation may be out of range although KALLSYMS
enabled. Thus, check func_size first. Then make ip_end be the sum of ip
and a constant (512) if func_size is equal to 0. Otherwise make ip_end be
the sum of ip and func_size.

Signed-off-by: Jinyang He <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op

mm16_r5_format.rt is 5 bits, so directly judge the value if equal or not.
mm_jalr_op requires 7th to 16th bits. These 10 which bits gen

MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op

mm16_r5_format.rt is 5 bits, so directly judge the value if equal or not.
mm_jalr_op requires 7th to 16th bits. These 10 which bits generated by
shifting u_format.uimmediate by 6 may be affected by sign extension.
Thus, take out the 10 bits for comparison.

Without this patch, errors may occur, such as these bits are all ones.

Signed-off-by: Jinyang He <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: process: Remove unnecessary headers inclusion

Some headers are not necessary, remove them and sort includes.

Signed-off-by: Jinyang He <[email protected]>
Reviewed-by: Huacai Chen <chenhu

MIPS: process: Remove unnecessary headers inclusion

Some headers are not necessary, remove them and sort includes.

Signed-off-by: Jinyang He <[email protected]>
Reviewed-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

smp: Cleanup smp_call_function*()

Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra

smp: Cleanup smp_call_function*()

Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>

show more ...

MIPS: process: include exec.h header in process.c

arch/mips/kernel/process.c:696:15: error: no previous prototype for 'arch_align_stack' [-Werror=missing-prototypes]

Signed-off-by: Pujin Shi <shipu

MIPS: process: include exec.h header in process.c

arch/mips/kernel/process.c:696:15: error: no previous prototype for 'arch_align_stack' [-Werror=missing-prototypes]

Signed-off-by: Pujin Shi <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: Loongson-3: Calculate ra properly when unwinding the stack

Loongson-3 has 16-bytes load/store instructions: gslq and gssq. This
patch calculate ra properly when unwinding the stack, if ra is s

MIPS: Loongson-3: Calculate ra properly when unwinding the stack

Loongson-3 has 16-bytes load/store instructions: gslq and gssq. This
patch calculate ra properly when unwinding the stack, if ra is saved
by gssq and restored by gslq.

Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: Loongson-3: Enable COP2 usage in kernel

Loongson-3's COP2 is Multi-Media coprocessor, it is disabled in kernel
mode by default. However, gslq/gssq (16-bytes load/store instructions)
overrides

MIPS: Loongson-3: Enable COP2 usage in kernel

Loongson-3's COP2 is Multi-Media coprocessor, it is disabled in kernel
mode by default. However, gslq/gssq (16-bytes load/store instructions)
overrides the instruction format of lwc2/swc2. If we wan't to use gslq/
gssq for optimization in kernel, we should enable COP2 usage in kernel.

Please pay attention that in this patch we only enable COP2 in kernel,
which means it will lose ST0_CU2 when a process go to user space (try
to use COP2 in user space will trigger an exception and then grab COP2,
which is similar to FPU). And as a result, we need to modify the context
switching code because the new scheduled process doesn't contain ST0_CU2
in its THERAD_STATUS probably.

For zboot, we disable gslq/gssq be generated by toolchain.

Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

arch: rename copy_thread_tls() back to copy_thread()

Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that o

arch: rename copy_thread_tls() back to copy_thread()

Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().

Cc: [email protected]
Acked-by: Thomas Bogendoerfer <[email protected]>A
Acked-by: Stafford Horne <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>A
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>

show more ...

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...