test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue

test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.

Signed-off-by: Jie Zhou <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>

show more ...

test/sched: update subport rate dynamically

Modify the test_sched application to build the hierarchical scheduler
with default subport bandwidth profile. It also allows to update
a subport with diff

test/sched: update subport rate dynamically

Modify the test_sched application to build the hierarchical scheduler
with default subport bandwidth profile. It also allows to update
a subport with different subport rates dynamically

Signed-off-by: Savinay Dharmappa <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>

show more ...

sched: update subport rate dynamically

Add support to update subport rate dynamically.

Signed-off-by: Savinay Dharmappa <[email protected]>
Acked-by: Cristian Dumitrescu <cristian.dumitre

sched: update subport rate dynamically

Add support to update subport rate dynamically.

Signed-off-by: Savinay Dharmappa <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>

show more ...

test/sched: add subport config flexibility

Modify tests function to allow different subports of the same port
to have different configuration in terms of number of pipes, pipe
queue sizes, etc.

Sig

test/sched: add subport config flexibility

Modify tests function to allow different subports of the same port
to have different configuration in terms of number of pipes, pipe
queue sizes, etc.

Signed-off-by: Jasvinder Singh <[email protected]>
Signed-off-by: Lukasz Krakowiak <[email protected]>

show more ...

test/sched: modify for config flexibility

update unit tests for configuration flexibility of pipe traffic
classes and queues size.

Signed-off-by: Jasvinder Singh <[email protected]>
Signed-

test/sched: modify for config flexibility

update unit tests for configuration flexibility of pipe traffic
classes and queues size.

Signed-off-by: Jasvinder Singh <[email protected]>
Signed-off-by: Abraham Tovar <[email protected]>
Signed-off-by: Lukasz Krakowiak <[email protected]>

show more ...

sched: remove WRR from strict priority TC queues

All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue

sched: remove WRR from strict priority TC queues

All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.

Signed-off-by: Jasvinder Singh <[email protected]>
Signed-off-by: Abraham Tovar <[email protected]>
Signed-off-by: Lukasz Krakowiak <[email protected]>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <[email protected]>
Reviewed-by: Olivier Matz <[email protected]>

show more ...

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
-

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
- rename IPV4_IHL_MULTIPLIER as RTE_IPV4_IHL_MULTIPLIER.
- rename IPV4_HDR_DF_SHIFT as RTE_IPV4_HDR_DF_SHIFT.
- rename IPV4_HDR_MF_SHIFT as RTE_IPV4_HDR_MF_SHIFT.
- rename IPV4_HDR_FO_SHIFT as RTE_IPV4_HDR_FO_SHIFT.
- rename IPV4_HDR_DF_FLAG as RTE_IPV4_HDR_DF_FLAG.
- rename IPV4_HDR_MF_FLAG as RTE_IPV4_HDR_MF_FLAG.
- rename IPV4_HDR_OFFSET_MASK as RTE_IPV4_HDR_OFFSET_MASK.
- rename IPV4_HDR_OFFSET_UNITS as RTE_IPV4_HDR_OFFSET_UNITS.
- rename IPV4_ANY as RTE_IPV4_ANY.
- rename IPV4_LOOPBACK as RTE_IPV4_LOOPBACK.
- rename IPV4_BROADCAST as RTE_IPV4_BROADCAST.
- rename IPV4_ALLHOSTS_GROUP as RTE_IPV4_ALLHOSTS_GROUP.
- rename IPV4_ALLRTRS_GROUP as RTE_IPV4_ALLRTRS_GROUP.
- rename IPV4_MAX_LOCAL_GROUP as RTE_IPV4_MAX_LOCAL_GROUP.
- rename IPV4_MIN_MCAST as RTE_IPV4_MIN_MCAST.
- rename IPV4_MAX_MCAST as RTE_IPV4_MAX_MCAST.
- rename IS_IPV4_MCAST as RTE_IS_IPV4_MCAST.
- rename IPV6_HDR_FL_SHIFT as RTE_IPV6_HDR_FL_SHIFT.
- rename IPV6_HDR_TC_SHIFT as RTE_IPV6_HDR_TC_SHIFT.
- rename IPV6_HDR_FL_MASK as RTE_IPV6_HDR_FL_MASK.
- rename IPV6_HDR_TC_MASK as RTE_IPV6_HDR_TC_MASK.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

meter: replace color definitions

This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr

meter: replace color definitions

This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.

This is simple search and replace exercise without any implementation
change.

[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html

Signed-off-by: Jasvinder Singh <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>

show more ...

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we ca

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.

This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.

For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.

Signed-off-by: Bruce Richardson <[email protected]>

show more ...

app/test: decrease memory requirements for sched

The sched test consumes 35MB memory. When memory is too fragmented (with
2M hugepages), the test can fail.

To reduce this risk, decrease it to 4.5MB

app/test: decrease memory requirements for sched

The sched test consumes 35MB memory. When memory is too fragmented (with
2M hugepages), the test can fail.

To reduce this risk, decrease it to 4.5MB by modifying
n_pipes_per_subport and qsize.

Signed-off-by: Olivier Matz <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>

show more ...

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the re

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the register macro.
This rework generate the structure inside the register macro.

Signed-off-by: Thomas Monjalon <[email protected]>
Reviewed-by: Jan Viktorin <[email protected]>

show more ...

app/test: fix sched mempool allocation

In previous setting, mempool size and cache_size were both 32.
It does not satisfy with cache_size checking rule by now.
Cache size should be less than CONFIG_

app/test: fix sched mempool allocation

In previous setting, mempool size and cache_size were both 32.
It does not satisfy with cache_size checking rule by now.
Cache size should be less than CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and
mempool size / 1.5.

Fixes: 462321b44a80 ("mempool: limit cache size")

Signed-off-by: Marvin Liu <[email protected]>
Acked-by: Jingjing Wu <[email protected]>
[Thomas: remove unused PKT_BURST_SZ]

show more ...

app: fix whitespace

Fix trailing whitespace, space before tab and empty lines at end of file.

Signed-off-by: Stephen Hemminger <[email protected]>
[Thomas: fix indent and alignment in test

app: fix whitespace

Fix trailing whitespace, space before tab and empty lines at end of file.

Signed-off-by: Stephen Hemminger <[email protected]>
[Thomas: fix indent and alignment in test_acl.h and test_sched.c]

show more ...

apps: use helper to create mbuf pools

When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect

apps: use helper to create mbuf pools

When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost

Signed-off-by: Olivier Matz <[email protected]>
Acked-by: Neil Horman <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>

show more ...

app/test: fix missing NULL pointer checks

In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.

VE

app/test: fix missing NULL pointer checks

In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.

VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.
This provides additional information to track when the failure occurred.

Signed-off-by: Daniel Mrzyglod <[email protected]>

show more ...

mbuf: remove the rte_pktmbuf structure

The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mb

mbuf: remove the rte_pktmbuf structure

The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.

Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it

Signed-off-by: Olivier Matz <[email protected]>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <[email protected]>
Acked-by: Pablo de Lara <[email protected]>

show more ...

app/test: only build what has been selected in config

Avoid building tests if their counterparts are not selected in config.
This has the nice side effect of fixing build errors when disabling parts

app/test: only build what has been selected in config

Avoid building tests if their counterparts are not selected in config.
This has the nice side effect of fixing build errors when disabling parts of
the dpdk.

Signed-off-by: David Marchand <[email protected]>
Acked-by: Bruce Richardson <[email protected]>
Acked-by: Neil Horman <[email protected]>

show more ...

app/test: convert all tests to register system

Remove all tests from the builtin commands list and use the dynamic commands
list register macro.

Signed-off-by: David Marchand <david.marchand@6wind.

app/test: convert all tests to register system

Remove all tests from the builtin commands list and use the dynamic commands
list register macro.

Signed-off-by: David Marchand <[email protected]>
Acked-by: Bruce Richardson <[email protected]>
Acked-by: Neil Horman <[email protected]>

show more ...

remove trailing whitespaces

This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [

remove trailing whitespaces

This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].

Signed-off-by: Bruce Richardson <[email protected]>
Acked-by: Neil Horman <[email protected]>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

sched: use malloc instead of memzone for allocation

The existing rte scheduler can only be safely configured once per port
because a memory zone has a fixed size once it is created and can never
be

sched: use malloc instead of memzone for allocation

The existing rte scheduler can only be safely configured once per port
because a memory zone has a fixed size once it is created and can never
be freed or change in size.

This patch changes the scheduler to use rte_malloc instead. This allows
for a port to be reconfigured by doing rte_sched_port_free followed
rte_sched_port_config.

The patch also removes the now unused name parameter from the
port parameters structure.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Thomas Monjalon <[email protected]>

show more ...

app/test: fix build without librte_cmdline

Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not need

app/test: fix build without librte_cmdline

Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not needed.

Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Olivier Matz <[email protected]>

show more ...