Changes in test_sched.c

3c60274c - test: skip unsupported tests on Windows

Wed, 26 Jan 2022 05:10:42 +0000

test: skip unsupported tests on WindowsSkip tests which are not yet supported for Windows:- The libraries that tests depend on are not enabled on Windows yet- The tests can compile but with issue still under investigation * test_func_reentrancy: Windows EAL has no protection against repeated calls. * test_lcores: Execution enters an infinite loops, requires investigation. * test_rcu_qsbr_perf: Execution hangs on Windows, requires investigation.Signed-off-by: Jie Zhou Signed-off-by: Dmitry Kozlyuk Acked-by: Tyler Retzlaff List of files: /dpdk/app/test/test_sched.c

b393ad5f - test/sched: update subport rate dynamically

Fri, 09 Oct 2020 12:39:18 +0000

test/sched: update subport rate dynamicallyModify the test_sched application to build the hierarchical schedulerwith default subport bandwidth profile. It also allows to updatea subport with different subport rates dynamicallySigned-off-by: Savinay Dharmappa Acked-by: Cristian Dumitrescu List of files: /dpdk/app/test/test_sched.c

ac6fcb84 - sched: update subport rate dynamically

Fri, 09 Oct 2020 12:39:14 +0000

sched: update subport rate dynamicallyAdd support to update subport rate dynamically.Signed-off-by: Savinay Dharmappa Acked-by: Cristian Dumitrescu List of files: /dpdk/app/test/test_sched.c

7cb98976 - test/sched: add subport config flexibility

Fri, 25 Oct 2019 10:51:20 +0000

test/sched: add subport config flexibilityModify tests function to allow different subports of the same portto have different configuration in terms of number of pipes, pipequeue sizes, etc.Signed-off-by: Jasvinder Singh Signed-off-by: Lukasz Krakowiak List of files: /dpdk/app/test/test_sched.c

0569926c - test/sched: modify for config flexibility

Mon, 22 Jul 2019 11:01:45 +0000

test/sched: modify for config flexibilityupdate unit tests for configuration flexibility of pipe trafficclasses and queues size.Signed-off-by: Jasvinder Singh Signed-off-by: Abraham Tovar Signed-off-by: Lukasz Krakowiak List of files: /dpdk/app/test/test_sched.c

e16b06da - sched: remove WRR from strict priority TC queues

Mon, 22 Jul 2019 11:01:38 +0000

sched: remove WRR from strict priority TC queuesAll higher priority traffic classes contain only one queue, thusremove wrr function for them. The lowest priority best-efforttraffic class conitnue to have multiple queues and packet arescheduled from its queues using wrr function.Signed-off-by: Jasvinder Singh Signed-off-by: Abraham Tovar Signed-off-by: Lukasz Krakowiak List of files: /dpdk/app/test/test_sched.c

0c9da755 - net: replace IPv4/v6 constants with uppercase name

Wed, 29 May 2019 11:29:16 +0000

net: replace IPv4/v6 constants with uppercase nameSince we change these macros, we might as well avoid triggering complaintsfrom checkpatch because of mixed case.old=RTE_IPv4new=RTE_IPV4git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"old=RTE_ETHER_TYPE_IPv4new=RTE_ETHER_TYPE_IPV4git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"old=RTE_ETHER_TYPE_IPv6new=RTE_ETHER_TYPE_IPV6git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"Signed-off-by: David Marchand Reviewed-by: Olivier Matz List of files: /dpdk/app/test/test_sched.c

24ac604e - net: add rte prefix to IP defines

Tue, 21 May 2019 16:13:11 +0000

net: add rte prefix to IP definesAdd 'RTE_' prefix to defines:- rename IPv4( as RTE_IPv4(.- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.- rename IPV4_IHL_MULTIPLIER as RTE_IPV4_IHL_MULTIPLIER.- rename IPV4_HDR_DF_SHIFT as RTE_IPV4_HDR_DF_SHIFT.- rename IPV4_HDR_MF_SHIFT as RTE_IPV4_HDR_MF_SHIFT.- rename IPV4_HDR_FO_SHIFT as RTE_IPV4_HDR_FO_SHIFT.- rename IPV4_HDR_DF_FLAG as RTE_IPV4_HDR_DF_FLAG.- rename IPV4_HDR_MF_FLAG as RTE_IPV4_HDR_MF_FLAG.- rename IPV4_HDR_OFFSET_MASK as RTE_IPV4_HDR_OFFSET_MASK.- rename IPV4_HDR_OFFSET_UNITS as RTE_IPV4_HDR_OFFSET_UNITS.- rename IPV4_ANY as RTE_IPV4_ANY.- rename IPV4_LOOPBACK as RTE_IPV4_LOOPBACK.- rename IPV4_BROADCAST as RTE_IPV4_BROADCAST.- rename IPV4_ALLHOSTS_GROUP as RTE_IPV4_ALLHOSTS_GROUP.- rename IPV4_ALLRTRS_GROUP as RTE_IPV4_ALLRTRS_GROUP.- rename IPV4_MAX_LOCAL_GROUP as RTE_IPV4_MAX_LOCAL_GROUP.- rename IPV4_MIN_MCAST as RTE_IPV4_MIN_MCAST.- rename IPV4_MAX_MCAST as RTE_IPV4_MAX_MCAST.- rename IS_IPV4_MCAST as RTE_IS_IPV4_MCAST.- rename IPV6_HDR_FL_SHIFT as RTE_IPV6_HDR_FL_SHIFT.- rename IPV6_HDR_TC_SHIFT as RTE_IPV6_HDR_TC_SHIFT.- rename IPV6_HDR_FL_MASK as RTE_IPV6_HDR_FL_MASK.- rename IPV6_HDR_TC_MASK as RTE_IPV6_HDR_TC_MASK.Signed-off-by: Olivier Matz Reviewed-by: Stephen Hemminger Reviewed-by: Maxime Coquelin Reviewed-by: Ferruh Yigit List of files: /dpdk/app/test/test_sched.c

a7c528e5 - net: add rte prefix to IP structure

Tue, 21 May 2019 16:13:10 +0000

net: add rte prefix to IP structureAdd 'rte_' prefix to structures:- rename struct ipv4_hdr as struct rte_ipv4_hdr.- rename struct ipv6_hdr as struct rte_ipv6_hdr.Signed-off-by: Olivier Matz Reviewed-by: Stephen Hemminger Reviewed-by: Maxime Coquelin Reviewed-by: Ferruh Yigit List of files: /dpdk/app/test/test_sched.c

35b2d13f - net: add rte prefix to ether defines

Tue, 21 May 2019 16:13:05 +0000

net: add rte prefix to ether definesAdd 'RTE_' prefix to defines:- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.- rename ETHER_MTU as RTE_ETHER_MTU.- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.Do not update the command line library to avoid adding a dependency tolibrte_net.Signed-off-by: Olivier Matz Reviewed-by: Stephen Hemminger Reviewed-by: Maxime Coquelin Reviewed-by: Ferruh Yigit List of files: /dpdk/app/test/test_sched.c

6d13ea8e - net: add rte prefix to ether structures

Tue, 21 May 2019 16:13:03 +0000

net: add rte prefix to ether structuresAdd 'rte_' prefix to structures:- rename struct ether_addr as struct rte_ether_addr.- rename struct ether_hdr as struct rte_ether_hdr.- rename struct vlan_hdr as struct rte_vlan_hdr.- rename struct vxlan_hdr as struct rte_vxlan_hdr.- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.Do not update the command line library to avoid adding a dependency tolibrte_net.Signed-off-by: Olivier Matz Reviewed-by: Stephen Hemminger Reviewed-by: Maxime Coquelin Reviewed-by: Ferruh Yigit List of files: /dpdk/app/test/test_sched.c

c1656328 - meter: replace color definitions

Thu, 11 Apr 2019 09:15:14 +0000

meter: replace color definitionsThis patch implements the changes proposed in the deprecationnote[1]. Replace multiple color definitions in various places such asrte_meter.h, rte_tm.h and rte_mtr.h with single rte_color definedin rte_meter.h.This is simple search and replace exercise without any implementationchange.[1] https://mails.dpdk.org/archives/dev/2019-January/123861.htmlSigned-off-by: Jasvinder Singh Acked-by: Cristian Dumitrescu List of files: /dpdk/app/test/test_sched.c

a9de470c - test: move to app directory

Tue, 26 Feb 2019 12:19:03 +0000

test: move to app directorySince all other apps have been moved to the "app" folder, the autotest appremains alone in the test folder. Rather than having an entire top-levelfolder for this, we can move it back to where it all started in earlyversions of DPDK - the "app/" folder.This move has a couple of advantages:* This reduces clutter at the top level of the project, due to one less folder.* It eliminates the separate build task necessary for building the autotests using make "make test-build" which means that developers are less likely to miss something in their own compilation tests* It re-aligns the final location of the test binary in the app folder when building with make with it's location in the source tree.For meson builds, the autotest app is different from the other apps in thatit needs a series of different test cases defined for it for use by "mesontest". Therefore, it does not get built as part of the main loop in theapp folder, but gets built separately at the end.Signed-off-by: Bruce Richardson List of files: /dpdk/app/test/test_sched.c

1c03be3c - app/test: decrease memory requirements for sched

Mon, 12 Sep 2016 11:38:49 +0000

app/test: decrease memory requirements for schedThe sched test consumes 35MB memory. When memory is too fragmented (with2M hugepages), the test can fail.To reduce this risk, decrease it to 4.5MB by modifyingn_pipes_per_subport and qsize.Signed-off-by: Olivier Matz Acked-by: Cristian Dumitrescu List of files: /dpdk/app/test/test_sched.c

26e09db6 - app/test: rework command registration

Wed, 13 Jul 2016 12:38:13 +0000

app/test: rework command registrationThe tests are registered with their command name by adding a structureto a list. The structure of each test was declared in each test fileand passed to the register macro.This rework generate the structure inside the register macro.Signed-off-by: Thomas Monjalon Reviewed-by: Jan Viktorin List of files: /dpdk/app/test/test_sched.c

bed17d93 - app/test: fix sched mempool allocation

Wed, 29 Jul 2015 03:22:01 +0000

app/test: fix sched mempool allocationIn previous setting, mempool size and cache_size were both 32.It does not satisfy with cache_size checking rule by now.Cache size should be less than CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE andmempool size / 1.5.Fixes: 462321b44a80 ("mempool: limit cache size")Signed-off-by: Marvin Liu Acked-by: Jingjing Wu [Thomas: remove unused PKT_BURST_SZ] List of files: /dpdk/app/test/test_sched.c

f3618dcb - app: fix whitespace

Thu, 04 Jun 2015 14:43:24 +0000

app: fix whitespaceFix trailing whitespace, space before tab and empty lines at end of file.Signed-off-by: Stephen Hemminger [Thomas: fix indent and alignment in test_acl.h and test_sched.c] List of files: /dpdk/app/test/test_sched.c

ea0c20ea - apps: use helper to create mbuf pools

Wed, 22 Apr 2015 09:57:24 +0000

apps: use helper to create mbuf poolsWhen it's possible, use the new helper to create the mbuf pools.Most of the patch is trivial, except for the following files thathave some specifics (indirect mbufs):- ip_fragmentation- ip_pipeline- ipv4_multicast- vhostSigned-off-by: Olivier Matz Acked-by: Neil Horman Acked-by: Konstantin Ananyev List of files: /dpdk/app/test/test_sched.c

d6fe2f5e - app/test: fix missing NULL pointer checks

Tue, 27 Jan 2015 15:44:53 +0000

app/test: fix missing NULL pointer checksIn test_sched, we are missing NULL pointer checks after create_mempool()and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.This provides additional information to track when the failure occurred.Signed-off-by: Daniel Mrzyglod List of files: /dpdk/app/test/test_sched.c

ea672a8b - mbuf: remove the rte_pktmbuf structure

Thu, 28 Aug 2014 15:42:37 +0000

mbuf: remove the rte_pktmbuf structureThe rte_pktmbuf structure was initially included in the rte_mbufstructure. This was needed when there was 2 types of mbuf (ctrl andpacket). As the control mbuf has been removed, we can merge therte_pktmbuf into the rte_mbuf structure.Advantages of doing this: - the access to mbuf fields is easier (ex: m->data instead of m->pkt.data) - make the structure more consistent: for instance, there was no reason to have the ol_flags field in rte_mbuf - it will allow a deeper reorganization of the rte_mbuf structure in the next commits, allowing to gain several bytes in itSigned-off-by: Olivier Matz [Bruce: updated for latest code and new example apps]Signed-off-by: Bruce Richardson Acked-by: Pablo de Lara List of files: /dpdk/app/test/test_sched.c