net/bonding: fix slaves initializing on MTU setting

If a initial process for the bonding device is like:
rte_eth_dev_configure
rte_eth_dev_set_mtu
queue setup and start, etc.

Pass the vdev args to

net/bonding: fix slaves initializing on MTU setting

If a initial process for the bonding device is like:
rte_eth_dev_configure
rte_eth_dev_set_mtu
queue setup and start, etc.

Pass the vdev args to application, and init bonding device only.
-a 0000:af:00.0 --vdev="net_bonding0,mode=2,slave=0000:af:00.0"

It will fail and complain for the slave device
"Port 0 must be configured before MTU set"

Test can be reproduced with ovs.

Fixes: b26bee10ee37 ("ethdev: forbid MTU set before device configure")
Cc: [email protected]

Signed-off-by: Junjie Wan <[email protected]>
Tested-by: Ferruh Yigit <[email protected]>
Acked-by: Min Hu (Connor) <[email protected]>

show more ...

remove unnecessary null checks

Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.

Remove redundant NULL pointer checks before free

remove unnecessary null checks

Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.

Remove redundant NULL pointer checks before free functions
found by nullfree.cocci

Signed-off-by: Stephen Hemminger <[email protected]>

show more ...

fix spelling in comments and doxygen

Fix spelling errors in comments including doxygen found using codespell.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Konstantin Anan

fix spelling in comments and doxygen

Fix spelling errors in comments including doxygen found using codespell.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Vladimir Medvedkin <[email protected]>
Reviewed-by: Honnappa Nagarahalli <[email protected]>
Acked-by: Ray Kinsella <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Somnath Kotur <[email protected]>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Huisong Li <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>

show more ...

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by:

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by: Bruce Richardson <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Acked-by: Thomas Monjalon <[email protected]>
Acked-by: Steven Webster <[email protected]>

show more ...

test: check stop call status

rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across test/event
according to new return type.

Signed-off-by:

test: check stop call status

rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across test/event
according to new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

test/bonding: fix LSC timeout unit

Fixes: 76d29903f5f5 ("bond: support link status interrupt")
Cc: [email protected]

Signed-off-by: Krzysztof Kanas <[email protected]>
Reviewed-by: Ferruh Yigit <fer

test/bonding: fix LSC timeout unit

Fixes: 76d29903f5f5 ("bond: support link status interrupt")
Cc: [email protected]

Signed-off-by: Krzysztof Kanas <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

test/bonding: fix LSC related cases

On rare situation test_link_bonding test case fail due to timespec
tv_nsec overflow, which causes pthread_cond_timedwait to return EINVAL
and test to fail.

Fixes

test/bonding: fix LSC related cases

On rare situation test_link_bonding test case fail due to timespec
tv_nsec overflow, which causes pthread_cond_timedwait to return EINVAL
and test to fail.

Fixes: 76d29903f5f5 ("bond: support link status interrupt")
Cc: [email protected]

Signed-off-by: Krzysztof Kanas <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

app: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: I

app: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

app: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new retur

app: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.

Signed-off-by: Igor Romanov <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

app: check code of promiscuous mode switch

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across

app: check code of promiscuous mode switch

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <[email protected]>
Reviewed-by: Olivier Matz <[email protected]>

show more ...

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemmin

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename is_unicast_ether_addr() as rte_is_unicast_ether_addr().
- rename is_multicast_ether_addr() as rte_is_multicast_ether_addr().
- rename is_broadcast_ether_addr() as rte_is_broadcast_ether_addr().
- rename is_universal_ether_addr() as rte_is_universal_ether_addr().
- rename is_local_admin_ether_addr() as rte_is_local_admin_ether_addr().
- rename is_valid_assigned_ether_addr() as rte_is_valid_assigned_ether_addr().
- rename eth_random_addr() as rte_eth_random_addr().
- rename ether_addr_copy() as rte_ether_addr_copy().
- rename ether_format_addr() as rte_ether_format_addr().

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ARP defines

Add 'RTE_' prefix to defines:
- rename ARP_HRD_ETHER as RTE_ARP_HRD_ETHER.
- rename ARP_OP_REQUEST as RTE_ARP_OP_REQUEST.
- rename ARP_OP_REPLY as RTE_ARP_OP_REPLY

net: add rte prefix to ARP defines

Add 'RTE_' prefix to defines:
- rename ARP_HRD_ETHER as RTE_ARP_HRD_ETHER.
- rename ARP_OP_REQUEST as RTE_ARP_OP_REQUEST.
- rename ARP_OP_REPLY as RTE_ARP_OP_REPLY.
- rename ARP_OP_REVREQUEST as RTE_ARP_OP_REVREQUEST.
- rename ARP_OP_REVREPLY as RTE_ARP_OP_REVREPLY.
- rename ARP_OP_INVREQUEST as RTE_ARP_OP_INVREQUEST.
- rename ARP_OP_INVREPLY as RTE_ARP_OP_INVREPLY.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ARP structures

Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.

Signed-off-by: Olivier Matz <olivier.matz@6wi

net: add rte prefix to ARP structures

Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

test/bonding: fix MAC assignment for re-run

Fix test_set_bonded_port_initialization_mac_assignment so that it works
after 're run' test_link_bonding.

Fixes: f2ef6f21ee2e ("bond: fix mac assignment

test/bonding: fix MAC assignment for re-run

Fix test_set_bonded_port_initialization_mac_assignment so that it works
after 're run' test_link_bonding.

Fixes: f2ef6f21ee2e ("bond: fix mac assignment to slaves")
Cc: [email protected]

Signed-off-by: Krzysztof Kanas <[email protected]>
Acked-by: Chas Williams <[email protected]>

show more ...

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we ca

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.

This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.

For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.

Signed-off-by: Bruce Richardson <[email protected]>

show more ...

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the re

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the register macro.
This rework generate the structure inside the register macro.

Signed-off-by: Thomas Monjalon <[email protected]>
Reviewed-by: Jan Viktorin <[email protected]>

show more ...

app/test: fix bond device name too long

Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.

Fixes: 92073ef961ee ("bond: unit tests")

Signed-off-by: Michal

app/test: fix bond device name too long

Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.

Fixes: 92073ef961ee ("bond: unit tests")

Signed-off-by: Michal Jastrzebski <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>
Tested-by: Huilong Xu <[email protected]>

show more ...

remove unneeded tests for NULL when freeing

free() already handles NULL pointer.

Signed-off-by: David Marchand <[email protected]>