1 /* USB OTG (On The Go) defines */ 2 /* 3 * 4 * These APIs may be used between USB controllers. USB device drivers 5 * (for either host or peripheral roles) don't use these calls; they 6 * continue to use just usb_device and usb_gadget. 7 */ 8 9 #ifndef __LINUX_USB_OTG_H 10 #define __LINUX_USB_OTG_H 11 12 /* OTG defines lots of enumeration states before device reset */ 13 enum usb_otg_state { 14 OTG_STATE_UNDEFINED = 0, 15 16 /* single-role peripheral, and dual-role default-b */ 17 OTG_STATE_B_IDLE, 18 OTG_STATE_B_SRP_INIT, 19 OTG_STATE_B_PERIPHERAL, 20 21 /* extra dual-role default-b states */ 22 OTG_STATE_B_WAIT_ACON, 23 OTG_STATE_B_HOST, 24 25 /* dual-role default-a */ 26 OTG_STATE_A_IDLE, 27 OTG_STATE_A_WAIT_VRISE, 28 OTG_STATE_A_WAIT_BCON, 29 OTG_STATE_A_HOST, 30 OTG_STATE_A_SUSPEND, 31 OTG_STATE_A_PERIPHERAL, 32 OTG_STATE_A_WAIT_VFALL, 33 OTG_STATE_A_VBUS_ERR, 34 }; 35 36 /* 37 * the otg driver needs to interact with both device side and host side 38 * usb controllers. it decides which controller is active at a given 39 * moment, using the transceiver, ID signal, HNP and sometimes static 40 * configuration information (including "board isn't wired for otg"). 41 */ 42 struct otg_transceiver { 43 struct device *dev; 44 const char *label; 45 46 u8 default_a; 47 enum usb_otg_state state; 48 49 struct usb_bus *host; 50 struct usb_gadget *gadget; 51 52 /* to pass extra port status to the root hub */ 53 u16 port_status; 54 u16 port_change; 55 56 /* bind/unbind the host controller */ 57 int (*set_host)(struct otg_transceiver *otg, 58 struct usb_bus *host); 59 60 /* bind/unbind the peripheral controller */ 61 int (*set_peripheral)(struct otg_transceiver *otg, 62 struct usb_gadget *gadget); 63 64 /* effective for B devices, ignored for A-peripheral */ 65 int (*set_power)(struct otg_transceiver *otg, 66 unsigned mA); 67 68 /* for non-OTG B devices: set transceiver into suspend mode */ 69 int (*set_suspend)(struct otg_transceiver *otg, 70 int suspend); 71 72 /* for B devices only: start session with A-Host */ 73 int (*start_srp)(struct otg_transceiver *otg); 74 75 /* start or continue HNP role switch */ 76 int (*start_hnp)(struct otg_transceiver *otg); 77 78 }; 79 80 81 /* for board-specific init logic */ 82 extern int otg_set_transceiver(struct otg_transceiver *); 83 84 85 /* for usb host and peripheral controller drivers */ 86 extern struct otg_transceiver *otg_get_transceiver(void); 87 extern void otg_put_transceiver(struct otg_transceiver *); 88 89 static inline int 90 otg_start_hnp(struct otg_transceiver *otg) 91 { 92 return otg->start_hnp(otg); 93 } 94 95 96 /* for HCDs */ 97 static inline int 98 otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) 99 { 100 return otg->set_host(otg, host); 101 } 102 103 104 /* for usb peripheral controller drivers */ 105 static inline int 106 otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph) 107 { 108 return otg->set_peripheral(otg, periph); 109 } 110 111 static inline int 112 otg_set_power(struct otg_transceiver *otg, unsigned mA) 113 { 114 return otg->set_power(otg, mA); 115 } 116 117 static inline int 118 otg_set_suspend(struct otg_transceiver *otg, int suspend) 119 { 120 if (otg->set_suspend != NULL) 121 return otg->set_suspend(otg, suspend); 122 else 123 return 0; 124 } 125 126 static inline int 127 otg_start_srp(struct otg_transceiver *otg) 128 { 129 return otg->start_srp(otg); 130 } 131 132 133 /* for OTG controller drivers (and maybe other stuff) */ 134 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); 135 136 #endif /* __LINUX_USB_OTG_H */ 137