usb: common: add helper to get role-switch-default-mode

Add helper to get "role-switch-default-mode", and convert it
to the corresponding enum usb_dr_mode

Signed-off-by: Chunfeng Yun <chunfeng.yun@

usb: common: add helper to get role-switch-default-mode

Add helper to get "role-switch-default-mode", and convert it
to the corresponding enum usb_dr_mode

Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: fix spelling mistakes in header files

Fix some spelling mistakes in comments:
trasfer ==> transfer
consumtion ==> consumption
endoint ==> endpoint
sharable ==> shareable
contraints ==> constrai

usb: fix spelling mistakes in header files

Fix some spelling mistakes in comments:
trasfer ==> transfer
consumtion ==> consumption
endoint ==> endpoint
sharable ==> shareable
contraints ==> constraints
Auxilary ==> Auxiliary
correspondig ==> corresponding
interupt ==> interrupt
inifinite ==> infinite
assignement ==> assignment

Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: common: of_usb_get_dr_mode to usb_get_dr_mode

By using the unified device property interface, the function
can be made available for all platforms and not just the
ones using DT.

Signed-off-by

usb: common: of_usb_get_dr_mode to usb_get_dr_mode

By using the unified device property interface, the function
can be made available for all platforms and not just the
ones using DT.

Signed-off-by: Heikki Krogerus <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: add usb_otg_caps structure for otg capabilities

This patch adds a structure usb_otg_caps to cover all otg related
capabilities of the device, including otg revision, and if hnp/srp/adp
is

usb: otg: add usb_otg_caps structure for otg capabilities

This patch adds a structure usb_otg_caps to cover all otg related
capabilities of the device, including otg revision, and if hnp/srp/adp
is supported.

Signed-off-by: Li Jun <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: add support to the generic PHY framework in OTG

This patch adds support of the PHY framework in OTG and keeps the USB
PHY compatibility. Here the only modification is to add PHY member in
the O

usb: add support to the generic PHY framework in OTG

This patch adds support of the PHY framework in OTG and keeps the USB
PHY compatibility. Here the only modification is to add PHY member in
the OTG structure, along with the USB PHY one.

Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: rename phy to usb_phy in OTG

This patch prepares the introduction of the generic PHY support in the
USB OTG common functions. The USB PHY member of the OTG structure is
renamed to 'usb_phy' and

usb: rename phy to usb_phy in OTG

This patch prepares the introduction of the generic PHY support in the
USB OTG common functions. The USB PHY member of the OTG structure is
renamed to 'usb_phy' and modifications are done in all drivers accessing
it. Renaming this pointer will allow to keep the compatibility for USB
PHY drivers.

Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: move the OTG state from the USB PHY to the OTG structure

Before using the PHY framework instead of the USB PHY one, we need to
move the OTG state into another place, since it won't be available

usb: move the OTG state from the USB PHY to the OTG structure

Before using the PHY framework instead of the USB PHY one, we need to
move the OTG state into another place, since it won't be available when
USB PHY isn't used. This patch moves the OTG state into the OTG
structure, and makes all the needed modifications in the drivers
using the OTG state.

[ [email protected] : fix build regressions with phy-tahvo.c, musb_dsps.c,
phy-isp1301-omap, and chipidea's debug.c ]

Acked-by: Kishon Vijay Abraham I <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: add devicetree helpers for determining dr_mode and phy_type

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) fr

usb: add devicetree helpers for determining dr_mode and phy_type

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: otg: move usb_otg_state_string to usb-common.c

otg.c only had a single function definition
which might make more sense to be placed in
usb-common.c. While doing that, we also delete
otg.c since

usb: otg: move usb_otg_state_string to usb-common.c

otg.c only had a single function definition
which might make more sense to be placed in
usb-common.c. While doing that, we also delete
otg.c since it's now empty.

Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: prefix otg_state_string with usb_

all other functions under drivers/usb/ start
with usb_, let's do the same thing.

This patch is in preparation for moving otg_state_string
to usb-common.c

usb: otg: prefix otg_state_string with usb_

all other functions under drivers/usb/ start
with usb_, let's do the same thing.

This patch is in preparation for moving otg_state_string
to usb-common.c and deleting otg.c completely.

Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: phy: fix build break

During phy interface separation from otg.h, as the enum "usb_otg_state"
was having multiple otg states info and removal of member 'state'
of this enum type from usb_phy str

usb: phy: fix build break

During phy interface separation from otg.h, as the enum "usb_otg_state"
was having multiple otg states info and removal of member 'state'
of this enum type from usb_phy struct did not generate any compilation
issues, I removed member state from struct usb_phy.

As this is causing build break in musb code, adding member 'state'
to usb_phy structure.

Signed-off-by: Venu Byravarasu <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Move phy interface to separate file.

As otg.h is containing lots of phy interface related
stuff, moving all phy interface related stuff to new
file named phy.h

Signed-off-by: Venu Byravar

usb: otg: Move phy interface to separate file.

As otg.h is containing lots of phy interface related
stuff, moving all phy interface related stuff to new
file named phy.h

Signed-off-by: Venu Byravarasu <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.h

nop-usb-xceiv was polluting otg.h with its own
function prototypes. Move those prototypes to
a nop-usb-xceiv.h header.

Signed-off-by:

usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.h

nop-usb-xceiv was polluting otg.h with its own
function prototypes. Move those prototypes to
a nop-usb-xceiv.h header.

Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: add notify_connect/notify_disconnect callback

This let usb phy driver has a chance to change hw settings when connect
status change.

Signed-off-by: Richard Zhao <[email protected]

usb: otg: add notify_connect/notify_disconnect callback

This let usb phy driver has a chance to change hw settings when connect
status change.

Signed-off-by: Richard Zhao <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Tested-by: Subodh Nijsure <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: otg: utils: devres: Add API's to associate a device with the phy

Used devres API's to associate the phy with a device so that on
driver detach, release function is invoked on the devres data(us

usb: otg: utils: devres: Add API's to associate a device with the phy

Used devres API's to associate the phy with a device so that on
driver detach, release function is invoked on the devres data(usb_phy)
and devres data(usb_phy) is released.

Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: support for multiple transceivers by a single controller

Add a linked list for keeping multiple PHY instances with different
types so that we can have separate USB2 and USB3 PHYs on one si

usb: otg: support for multiple transceivers by a single controller

Add a linked list for keeping multiple PHY instances with different
types so that we can have separate USB2 and USB3 PHYs on one single
board. _get_phy_ has been changed so that the controller gets
the transceiver by type. _remove_phy_ has been added to let the phy
be removed from the phy list.

Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: utils: rename function name in OTG utils

_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is
replaced with usb_add_phy to make it similar to other usb standard
function n

usb: otg: utils: rename function name in OTG utils

_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is
replaced with usb_add_phy to make it similar to other usb standard
function names like usb_add_hcd.

Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: musb: wake the device before ulpi transfers

musb can be suspended at the time some other driver wants to do ulpi
transfers using usb_phy_io_* functions, and that can cause data abort,
as it hap

usb: musb: wake the device before ulpi transfers

musb can be suspended at the time some other driver wants to do ulpi
transfers using usb_phy_io_* functions, and that can cause data abort,
as it happened with isp1704_charger:
http://article.gmane.org/gmane.linux.kernel/1226122

Add pm_runtime to ulpi functions to rectify this. This also adds io_dev
to usb_phy so that pm_runtime_* functions can be used.

Cc: Felipe Contreras <[email protected]>
Signed-off-by: Grazvydas Ignotas <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Convert all users to pass struct usb_otg for OTG functions

This changes the otg functions so that they receive struct
otg instead of struct usb_phy as parameter and
converts all users of t

usb: otg: Convert all users to pass struct usb_otg for OTG functions

This changes the otg functions so that they receive struct
otg instead of struct usb_phy as parameter and
converts all users of these functions to pass the otg member
of their usb_phy.

Includes fixes to IMX code from Sascha Hauer.

[ [email protected] : fixed a compile warning on ehci-mv.c ]

Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Acked-by: Igor Grinberg <[email protected]>
Acked-by: Pavankumar Kondeti <[email protected]>
Acked-by: Li Yang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Remove OTG specific members from usb_phy

All the drivers are now converted to use struct usb_otg, so
removing the OTG specific members from struct usb_phy.

Signed-off-by: Heikki Krogerus

usb: otg: Remove OTG specific members from usb_phy

All the drivers are now converted to use struct usb_otg, so
removing the OTG specific members from struct usb_phy.

Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Separate otg members from usb_phy

Introducing struct otg and collecting otg specific members
to it from struct usb_phy. There are no changes to
struct usb_phy at this stage. This also rena

usb: otg: Separate otg members from usb_phy

Introducing struct otg and collecting otg specific members
to it from struct usb_phy. There are no changes to
struct usb_phy at this stage. This also renames
transceiver specific functions, and offers aliases for the
old otg ones.

Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Rename usb_xceiv_event to usb_phy_event

Convert all users.

Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by:

usb: otg: Rename usb_xceiv_event to usb_phy_event

Convert all users.

Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: otg: Rename otg_transceiver to usb_phy

This is the first step in separating USB transceivers from
USB OTG utilities.

Includes fixes to IMX code from Sascha Hauer.

Signed-off-by: Heikki Kroger

usb: otg: Rename otg_transceiver to usb_phy

This is the first step in separating USB transceivers from
USB OTG utilities.

Includes fixes to IMX code from Sascha Hauer.

Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Acked-by: Pavankumar Kondeti <[email protected]>
Acked-by: Li Yang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Acked-by: Igor Grinberg <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: fix building musb drivers

Commit 3dacdf11 "usb: factor out state_string() on otg drivers"
broke building musb drivers since there is already another
otg_state_string() function in musb drivers,

usb: fix building musb drivers

Commit 3dacdf11 "usb: factor out state_string() on otg drivers"
broke building musb drivers since there is already another
otg_state_string() function in musb drivers, but with different
prototype. Fix musb drivers to use common otg_state_string(), too.

Also provide a nop for otg_state_string() if CONFIG_USB_OTG_UTILS
is not defined.

Signed-off-by: Anatolij Gustschin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...