1 /* 2 * TI clock drivers support 3 * 4 * Copyright (C) 2013 Texas Instruments, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 11 * kind, whether express or implied; without even the implied warranty 12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15 #ifndef __LINUX_CLK_TI_H__ 16 #define __LINUX_CLK_TI_H__ 17 18 #include <linux/clk-provider.h> 19 #include <linux/clkdev.h> 20 21 /** 22 * struct dpll_data - DPLL registers and integration data 23 * @mult_div1_reg: register containing the DPLL M and N bitfields 24 * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg 25 * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg 26 * @clk_bypass: struct clk pointer to the clock's bypass clock input 27 * @clk_ref: struct clk pointer to the clock's reference clock input 28 * @control_reg: register containing the DPLL mode bitfield 29 * @enable_mask: mask of the DPLL mode bitfield in @control_reg 30 * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() 31 * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() 32 * @last_rounded_m4xen: cache of the last M4X result of 33 * omap4_dpll_regm4xen_round_rate() 34 * @last_rounded_lpmode: cache of the last lpmode result of 35 * omap4_dpll_lpmode_recalc() 36 * @max_multiplier: maximum valid non-bypass multiplier value (actual) 37 * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() 38 * @min_divider: minimum valid non-bypass divider value (actual) 39 * @max_divider: maximum valid non-bypass divider value (actual) 40 * @modes: possible values of @enable_mask 41 * @autoidle_reg: register containing the DPLL autoidle mode bitfield 42 * @idlest_reg: register containing the DPLL idle status bitfield 43 * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg 44 * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg 45 * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg 46 * @dcc_rate: rate atleast which DCC @dcc_mask must be set 47 * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg 48 * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg 49 * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg 50 * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg 51 * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs 52 * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs 53 * @flags: DPLL type/features (see below) 54 * 55 * Possible values for @flags: 56 * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) 57 * 58 * @freqsel_mask is only used on the OMAP34xx family and AM35xx. 59 * 60 * XXX Some DPLLs have multiple bypass inputs, so it's not technically 61 * correct to only have one @clk_bypass pointer. 62 * 63 * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, 64 * @last_rounded_n) should be separated from the runtime-fixed fields 65 * and placed into a different structure, so that the runtime-fixed data 66 * can be placed into read-only space. 67 */ 68 struct dpll_data { 69 void __iomem *mult_div1_reg; 70 u32 mult_mask; 71 u32 div1_mask; 72 struct clk *clk_bypass; 73 struct clk *clk_ref; 74 void __iomem *control_reg; 75 u32 enable_mask; 76 unsigned long last_rounded_rate; 77 u16 last_rounded_m; 78 u8 last_rounded_m4xen; 79 u8 last_rounded_lpmode; 80 u16 max_multiplier; 81 u8 last_rounded_n; 82 u8 min_divider; 83 u16 max_divider; 84 u8 modes; 85 void __iomem *autoidle_reg; 86 void __iomem *idlest_reg; 87 u32 autoidle_mask; 88 u32 freqsel_mask; 89 u32 idlest_mask; 90 u32 dco_mask; 91 u32 sddiv_mask; 92 u32 dcc_mask; 93 unsigned long dcc_rate; 94 u32 lpmode_mask; 95 u32 m4xen_mask; 96 u8 auto_recal_bit; 97 u8 recal_en_bit; 98 u8 recal_st_bit; 99 u8 flags; 100 }; 101 102 struct clk_hw_omap; 103 104 /** 105 * struct clk_hw_omap_ops - OMAP clk ops 106 * @find_idlest: find idlest register information for a clock 107 * @find_companion: find companion clock register information for a clock, 108 * basically converts CM_ICLKEN* <-> CM_FCLKEN* 109 * @allow_idle: enables autoidle hardware functionality for a clock 110 * @deny_idle: prevent autoidle hardware functionality for a clock 111 */ 112 struct clk_hw_omap_ops { 113 void (*find_idlest)(struct clk_hw_omap *oclk, 114 void __iomem **idlest_reg, 115 u8 *idlest_bit, u8 *idlest_val); 116 void (*find_companion)(struct clk_hw_omap *oclk, 117 void __iomem **other_reg, 118 u8 *other_bit); 119 void (*allow_idle)(struct clk_hw_omap *oclk); 120 void (*deny_idle)(struct clk_hw_omap *oclk); 121 }; 122 123 /** 124 * struct clk_hw_omap - OMAP struct clk 125 * @node: list_head connecting this clock into the full clock list 126 * @enable_reg: register to write to enable the clock (see @enable_bit) 127 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) 128 * @flags: see "struct clk.flags possibilities" above 129 * @clksel_reg: for clksel clks, register va containing src/divisor select 130 * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector 131 * @clksel: for clksel clks, pointer to struct clksel for this clock 132 * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock 133 * @clkdm_name: clockdomain name that this clock is contained in 134 * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime 135 * @ops: clock ops for this clock 136 */ 137 struct clk_hw_omap { 138 struct clk_hw hw; 139 struct list_head node; 140 unsigned long fixed_rate; 141 u8 fixed_div; 142 void __iomem *enable_reg; 143 u8 enable_bit; 144 u8 flags; 145 void __iomem *clksel_reg; 146 u32 clksel_mask; 147 const struct clksel *clksel; 148 struct dpll_data *dpll_data; 149 const char *clkdm_name; 150 struct clockdomain *clkdm; 151 const struct clk_hw_omap_ops *ops; 152 }; 153 154 /* 155 * struct clk_hw_omap.flags possibilities 156 * 157 * XXX document the rest of the clock flags here 158 * 159 * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed 160 * with 32bit ops, by default OMAP1 uses 16bit ops. 161 * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. 162 * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent 163 * clock is put to no-idle mode. 164 * ENABLE_ON_INIT: Clock is enabled on init. 165 * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' 166 * disable. This inverts the behavior making '0' enable and '1' disable. 167 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL 168 * bits share the same register. This flag allows the 169 * omap4_dpllmx*() code to determine which GATE_CTRL bit field 170 * should be used. This is a temporary solution - a better approach 171 * would be to associate clock type-specific data with the clock, 172 * similar to the struct dpll_data approach. 173 * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. 174 */ 175 #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ 176 #define CLOCK_IDLE_CONTROL (1 << 1) 177 #define CLOCK_NO_IDLE_PARENT (1 << 2) 178 #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ 179 #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ 180 #define CLOCK_CLKOUTX2 (1 << 5) 181 #define MEMMAP_ADDRESSING (1 << 6) 182 183 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ 184 #define DPLL_LOW_POWER_STOP 0x1 185 #define DPLL_LOW_POWER_BYPASS 0x5 186 #define DPLL_LOCKED 0x7 187 188 /* DPLL Type and DCO Selection Flags */ 189 #define DPLL_J_TYPE 0x1 190 191 /* Composite clock component types */ 192 enum { 193 CLK_COMPONENT_TYPE_GATE = 0, 194 CLK_COMPONENT_TYPE_DIVIDER, 195 CLK_COMPONENT_TYPE_MUX, 196 CLK_COMPONENT_TYPE_MAX, 197 }; 198 199 /** 200 * struct ti_dt_clk - OMAP DT clock alias declarations 201 * @lk: clock lookup definition 202 * @node_name: clock DT node to map to 203 */ 204 struct ti_dt_clk { 205 struct clk_lookup lk; 206 char *node_name; 207 }; 208 209 #define DT_CLK(dev, con, name) \ 210 { \ 211 .lk = { \ 212 .dev_id = dev, \ 213 .con_id = con, \ 214 }, \ 215 .node_name = name, \ 216 } 217 218 /* Static memmap indices */ 219 enum { 220 TI_CLKM_CM = 0, 221 TI_CLKM_CM2, 222 TI_CLKM_PRM, 223 TI_CLKM_SCRM, 224 TI_CLKM_CTRL, 225 CLK_MAX_MEMMAPS 226 }; 227 228 typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *); 229 230 /** 231 * struct clk_omap_reg - OMAP register declaration 232 * @offset: offset from the master IP module base address 233 * @index: index of the master IP module 234 */ 235 struct clk_omap_reg { 236 u16 offset; 237 u16 index; 238 }; 239 240 /** 241 * struct ti_clk_ll_ops - low-level register access ops for a clock 242 * @clk_readl: pointer to register read function 243 * @clk_writel: pointer to register write function 244 * 245 * Low-level register access ops are generally used by the basic clock types 246 * (clk-gate, clk-mux, clk-divider etc.) to provide support for various 247 * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be 248 * used by other hardware-specific clock drivers if needed. 249 */ 250 struct ti_clk_ll_ops { 251 u32 (*clk_readl)(void __iomem *reg); 252 void (*clk_writel)(u32 val, void __iomem *reg); 253 }; 254 255 extern struct ti_clk_ll_ops *ti_clk_ll_ops; 256 257 extern const struct clk_ops ti_clk_divider_ops; 258 extern const struct clk_ops ti_clk_mux_ops; 259 260 #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) 261 262 void omap2_init_clk_hw_omap_clocks(struct clk *clk); 263 int omap3_noncore_dpll_enable(struct clk_hw *hw); 264 void omap3_noncore_dpll_disable(struct clk_hw *hw); 265 int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index); 266 int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, 267 unsigned long parent_rate); 268 int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, 269 unsigned long rate, 270 unsigned long parent_rate, 271 u8 index); 272 long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, 273 unsigned long rate, 274 unsigned long min_rate, 275 unsigned long max_rate, 276 unsigned long *best_parent_rate, 277 struct clk_hw **best_parent_clk); 278 unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, 279 unsigned long parent_rate); 280 long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, 281 unsigned long target_rate, 282 unsigned long *parent_rate); 283 long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, 284 unsigned long rate, 285 unsigned long min_rate, 286 unsigned long max_rate, 287 unsigned long *best_parent_rate, 288 struct clk_hw **best_parent_clk); 289 u8 omap2_init_dpll_parent(struct clk_hw *hw); 290 unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); 291 long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, 292 unsigned long *parent_rate); 293 void omap2_init_clk_clkdm(struct clk_hw *clk); 294 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, 295 unsigned long parent_rate); 296 int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, 297 unsigned long parent_rate); 298 long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, 299 unsigned long *prate); 300 int omap2_clkops_enable_clkdm(struct clk_hw *hw); 301 void omap2_clkops_disable_clkdm(struct clk_hw *hw); 302 int omap2_clk_disable_autoidle_all(void); 303 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); 304 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, 305 unsigned long parent_rate); 306 int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, 307 unsigned long parent_rate, u8 index); 308 int omap2_dflt_clk_enable(struct clk_hw *hw); 309 void omap2_dflt_clk_disable(struct clk_hw *hw); 310 int omap2_dflt_clk_is_enabled(struct clk_hw *hw); 311 void omap3_clk_lock_dpll5(void); 312 unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, 313 unsigned long parent_rate); 314 int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, 315 unsigned long parent_rate); 316 void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); 317 void omap2xxx_clkt_vps_init(void); 318 319 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); 320 void ti_dt_clocks_register(struct ti_dt_clk *oclks); 321 void ti_dt_clk_init_provider(struct device_node *np, int index); 322 void ti_dt_clk_init_retry_clks(void); 323 void ti_dt_clockdomains_setup(void); 324 int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, 325 ti_of_clk_init_cb_t func); 326 int of_ti_clk_autoidle_setup(struct device_node *node); 327 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type); 328 329 int omap3430_dt_clk_init(void); 330 int omap3630_dt_clk_init(void); 331 int am35xx_dt_clk_init(void); 332 int ti81xx_dt_clk_init(void); 333 int omap4xxx_dt_clk_init(void); 334 int omap5xxx_dt_clk_init(void); 335 int dra7xx_dt_clk_init(void); 336 int am33xx_dt_clk_init(void); 337 int am43xx_dt_clk_init(void); 338 int omap2420_dt_clk_init(void); 339 int omap2430_dt_clk_init(void); 340 341 #ifdef CONFIG_OF 342 void of_ti_clk_allow_autoidle_all(void); 343 void of_ti_clk_deny_autoidle_all(void); 344 #else 345 static inline void of_ti_clk_allow_autoidle_all(void) { } 346 static inline void of_ti_clk_deny_autoidle_all(void) { } 347 #endif 348 349 extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; 350 extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; 351 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; 352 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; 353 extern const struct clk_hw_omap_ops clkhwops_wait; 354 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; 355 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; 356 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; 357 extern const struct clk_hw_omap_ops clkhwops_iclk; 358 extern const struct clk_hw_omap_ops clkhwops_iclk_wait; 359 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; 360 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; 361 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; 362 363 #ifdef CONFIG_ATAGS 364 int omap3430_clk_legacy_init(void); 365 int omap3430es1_clk_legacy_init(void); 366 int omap36xx_clk_legacy_init(void); 367 int am35xx_clk_legacy_init(void); 368 #else 369 static inline int omap3430_clk_legacy_init(void) { return -ENXIO; } 370 static inline int omap3430es1_clk_legacy_init(void) { return -ENXIO; } 371 static inline int omap36xx_clk_legacy_init(void) { return -ENXIO; } 372 static inline int am35xx_clk_legacy_init(void) { return -ENXIO; } 373 #endif 374 375 376 #endif 377