1 /*-
2 * Copyright (c) 2007-2010 Damien Bergamini <[email protected]>
3 * Copyright (c) 2012 Bernhard Schmidt <[email protected]>
4 *
5 * Permission to use, copy, modify, and distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 *
17 * $OpenBSD: rt2860.c,v 1.65 2010/10/23 14:24:54 damien Exp $
18 */
19
20 #include <sys/cdefs.h>
21 /*-
22 * Ralink Technology RT2860/RT3090/RT3390/RT3562/RT5390/RT5392 chipset driver
23 * http://www.ralinktech.com/
24 */
25
26 #include <sys/param.h>
27 #include <sys/sysctl.h>
28 #include <sys/sockio.h>
29 #include <sys/mbuf.h>
30 #include <sys/kernel.h>
31 #include <sys/socket.h>
32 #include <sys/systm.h>
33 #include <sys/malloc.h>
34 #include <sys/lock.h>
35 #include <sys/mutex.h>
36 #include <sys/module.h>
37 #include <sys/bus.h>
38 #include <sys/endian.h>
39 #include <sys/firmware.h>
40
41 #include <machine/bus.h>
42 #include <machine/resource.h>
43 #include <sys/rman.h>
44
45 #include <net/bpf.h>
46 #include <net/if.h>
47 #include <net/if_var.h>
48 #include <net/if_arp.h>
49 #include <net/ethernet.h>
50 #include <net/if_dl.h>
51 #include <net/if_media.h>
52 #include <net/if_types.h>
53
54 #include <net80211/ieee80211_var.h>
55 #include <net80211/ieee80211_radiotap.h>
56 #include <net80211/ieee80211_regdomain.h>
57 #include <net80211/ieee80211_ratectl.h>
58
59 #include <netinet/in.h>
60 #include <netinet/in_systm.h>
61 #include <netinet/in_var.h>
62 #include <netinet/ip.h>
63 #include <netinet/if_ether.h>
64
65 #include <dev/ral/rt2860reg.h>
66 #include <dev/ral/rt2860var.h>
67
68 #define RAL_DEBUG
69 #ifdef RAL_DEBUG
70 #define DPRINTF(x) do { if (sc->sc_debug > 0) printf x; } while (0)
71 #define DPRINTFN(n, x) do { if (sc->sc_debug >= (n)) printf x; } while (0)
72 #else
73 #define DPRINTF(x)
74 #define DPRINTFN(n, x)
75 #endif
76
77 static struct ieee80211vap *rt2860_vap_create(struct ieee80211com *,
78 const char [IFNAMSIZ], int, enum ieee80211_opmode,
79 int, const uint8_t [IEEE80211_ADDR_LEN],
80 const uint8_t [IEEE80211_ADDR_LEN]);
81 static void rt2860_vap_delete(struct ieee80211vap *);
82 static void rt2860_dma_map_addr(void *, bus_dma_segment_t *, int, int);
83 static int rt2860_alloc_tx_ring(struct rt2860_softc *,
84 struct rt2860_tx_ring *);
85 static void rt2860_reset_tx_ring(struct rt2860_softc *,
86 struct rt2860_tx_ring *);
87 static void rt2860_free_tx_ring(struct rt2860_softc *,
88 struct rt2860_tx_ring *);
89 static int rt2860_alloc_tx_pool(struct rt2860_softc *);
90 static void rt2860_free_tx_pool(struct rt2860_softc *);
91 static int rt2860_alloc_rx_ring(struct rt2860_softc *,
92 struct rt2860_rx_ring *);
93 static void rt2860_reset_rx_ring(struct rt2860_softc *,
94 struct rt2860_rx_ring *);
95 static void rt2860_free_rx_ring(struct rt2860_softc *,
96 struct rt2860_rx_ring *);
97 static void rt2860_updatestats(struct rt2860_softc *);
98 static void rt2860_newassoc(struct ieee80211_node *, int);
99 static void rt2860_node_free(struct ieee80211_node *);
100 #ifdef IEEE80211_HT
101 static int rt2860_ampdu_rx_start(struct ieee80211com *,
102 struct ieee80211_node *, uint8_t);
103 static void rt2860_ampdu_rx_stop(struct ieee80211com *,
104 struct ieee80211_node *, uint8_t);
105 #endif
106 static int rt2860_newstate(struct ieee80211vap *, enum ieee80211_state,
107 int);
108 static uint16_t rt3090_efuse_read_2(struct rt2860_softc *, uint16_t);
109 static uint16_t rt2860_eeprom_read_2(struct rt2860_softc *, uint16_t);
110 static void rt2860_intr_coherent(struct rt2860_softc *);
111 static void rt2860_drain_stats_fifo(struct rt2860_softc *);
112 static void rt2860_tx_intr(struct rt2860_softc *, int);
113 static void rt2860_rx_intr(struct rt2860_softc *);
114 static void rt2860_tbtt_intr(struct rt2860_softc *);
115 static void rt2860_gp_intr(struct rt2860_softc *);
116 static int rt2860_tx(struct rt2860_softc *, struct mbuf *,
117 struct ieee80211_node *);
118 static int rt2860_raw_xmit(struct ieee80211_node *, struct mbuf *,
119 const struct ieee80211_bpf_params *);
120 static int rt2860_tx_raw(struct rt2860_softc *, struct mbuf *,
121 struct ieee80211_node *,
122 const struct ieee80211_bpf_params *params);
123 static int rt2860_transmit(struct ieee80211com *, struct mbuf *);
124 static void rt2860_start(struct rt2860_softc *);
125 static void rt2860_watchdog(void *);
126 static void rt2860_parent(struct ieee80211com *);
127 static void rt2860_mcu_bbp_write(struct rt2860_softc *, uint8_t, uint8_t);
128 static uint8_t rt2860_mcu_bbp_read(struct rt2860_softc *, uint8_t);
129 static void rt2860_rf_write(struct rt2860_softc *, uint8_t, uint32_t);
130 static uint8_t rt3090_rf_read(struct rt2860_softc *, uint8_t);
131 static void rt3090_rf_write(struct rt2860_softc *, uint8_t, uint8_t);
132 static int rt2860_mcu_cmd(struct rt2860_softc *, uint8_t, uint16_t, int);
133 static void rt2860_enable_mrr(struct rt2860_softc *);
134 static void rt2860_set_txpreamble(struct rt2860_softc *);
135 static void rt2860_set_basicrates(struct rt2860_softc *,
136 const struct ieee80211_rateset *);
137 static void rt2860_scan_start(struct ieee80211com *);
138 static void rt2860_scan_end(struct ieee80211com *);
139 static void rt2860_getradiocaps(struct ieee80211com *, int, int *,
140 struct ieee80211_channel[]);
141 static void rt2860_set_channel(struct ieee80211com *);
142 static void rt2860_select_chan_group(struct rt2860_softc *, int);
143 static void rt2860_set_chan(struct rt2860_softc *, u_int);
144 static void rt3090_set_chan(struct rt2860_softc *, u_int);
145 static void rt5390_set_chan(struct rt2860_softc *, u_int);
146 static int rt3090_rf_init(struct rt2860_softc *);
147 static void rt5390_rf_init(struct rt2860_softc *);
148 static void rt3090_rf_wakeup(struct rt2860_softc *);
149 static void rt5390_rf_wakeup(struct rt2860_softc *);
150 static int rt3090_filter_calib(struct rt2860_softc *, uint8_t, uint8_t,
151 uint8_t *);
152 static void rt3090_rf_setup(struct rt2860_softc *);
153 static void rt2860_set_leds(struct rt2860_softc *, uint16_t);
154 static void rt2860_set_gp_timer(struct rt2860_softc *, int);
155 static void rt2860_set_bssid(struct rt2860_softc *, const uint8_t *);
156 static void rt2860_set_macaddr(struct rt2860_softc *, const uint8_t *);
157 static void rt2860_update_promisc(struct ieee80211com *);
158 static void rt2860_updateslot(struct ieee80211com *);
159 static void rt2860_updateprot(struct rt2860_softc *);
160 static int rt2860_updateedca(struct ieee80211com *);
161 #ifdef HW_CRYPTO
162 static int rt2860_set_key(struct ieee80211com *, struct ieee80211_node *,
163 struct ieee80211_key *);
164 static void rt2860_delete_key(struct ieee80211com *,
165 struct ieee80211_node *, struct ieee80211_key *);
166 #endif
167 static int8_t rt2860_rssi2dbm(struct rt2860_softc *, uint8_t, uint8_t);
168 static const char *rt2860_get_rf(uint16_t);
169 static int rt2860_read_eeprom(struct rt2860_softc *,
170 uint8_t macaddr[IEEE80211_ADDR_LEN]);
171 static int rt2860_bbp_init(struct rt2860_softc *);
172 static void rt5390_bbp_init(struct rt2860_softc *);
173 static int rt2860_txrx_enable(struct rt2860_softc *);
174 static void rt2860_init(void *);
175 static void rt2860_init_locked(struct rt2860_softc *);
176 static void rt2860_stop(void *);
177 static void rt2860_stop_locked(struct rt2860_softc *);
178 static int rt2860_load_microcode(struct rt2860_softc *);
179 #ifdef NOT_YET
180 static void rt2860_calib(struct rt2860_softc *);
181 #endif
182 static void rt3090_set_rx_antenna(struct rt2860_softc *, int);
183 static void rt2860_switch_chan(struct rt2860_softc *,
184 struct ieee80211_channel *);
185 static int rt2860_setup_beacon(struct rt2860_softc *,
186 struct ieee80211vap *);
187 static void rt2860_enable_tsf_sync(struct rt2860_softc *);
188
189 static const struct {
190 uint32_t reg;
191 uint32_t val;
192 } rt2860_def_mac[] = {
193 RT2860_DEF_MAC
194 };
195
196 static const struct {
197 uint8_t reg;
198 uint8_t val;
199 } rt2860_def_bbp[] = {
200 RT2860_DEF_BBP
201 }, rt5390_def_bbp[] = {
202 RT5390_DEF_BBP
203 };
204
205 static const struct rfprog {
206 uint8_t chan;
207 uint32_t r1, r2, r3, r4;
208 } rt2860_rf2850[] = {
209 RT2860_RF2850
210 };
211
212 struct {
213 uint8_t n, r, k;
214 } rt3090_freqs[] = {
215 RT3070_RF3052
216 };
217
218 static const struct {
219 uint8_t reg;
220 uint8_t val;
221 } rt3090_def_rf[] = {
222 RT3070_DEF_RF
223 }, rt5390_def_rf[] = {
224 RT5390_DEF_RF
225 }, rt5392_def_rf[] = {
226 RT5392_DEF_RF
227 };
228
229 static const uint8_t rt2860_chan_5ghz[] =
230 { 36, 38, 40, 44, 46, 48, 52, 54, 56, 60, 62, 64, 100, 102, 104,
231 108, 110, 112, 116, 118, 120, 124, 126, 128, 132, 134, 136, 140,
232 149, 151, 153, 157, 159, 161, 165, 167, 169, 171, 173 };
233
234 int
rt2860_attach(device_t dev,int id)235 rt2860_attach(device_t dev, int id)
236 {
237 struct rt2860_softc *sc = device_get_softc(dev);
238 struct ieee80211com *ic = &sc->sc_ic;
239 uint32_t tmp;
240 int error, ntries, qid;
241
242 sc->sc_dev = dev;
243 sc->sc_debug = 0;
244
245 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
246 MTX_DEF | MTX_RECURSE);
247
248 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0);
249 mbufq_init(&sc->sc_snd, ifqmaxlen);
250
251 /* wait for NIC to initialize */
252 for (ntries = 0; ntries < 100; ntries++) {
253 tmp = RAL_READ(sc, RT2860_ASIC_VER_ID);
254 if (tmp != 0 && tmp != 0xffffffff)
255 break;
256 DELAY(10);
257 }
258 if (ntries == 100) {
259 device_printf(sc->sc_dev,
260 "timeout waiting for NIC to initialize\n");
261 error = EIO;
262 goto fail1;
263 }
264 sc->mac_ver = tmp >> 16;
265 sc->mac_rev = tmp & 0xffff;
266
267 if (sc->mac_ver != 0x2860 &&
268 (id == 0x0681 || id == 0x0781 || id == 0x1059))
269 sc->sc_flags |= RT2860_ADVANCED_PS;
270
271 /* retrieve RF rev. no and various other things from EEPROM */
272 rt2860_read_eeprom(sc, ic->ic_macaddr);
273 device_printf(sc->sc_dev, "MAC/BBP RT%X (rev 0x%04X), "
274 "RF %s (MIMO %dT%dR), address %6D\n",
275 sc->mac_ver, sc->mac_rev, rt2860_get_rf(sc->rf_rev),
276 sc->ntxchains, sc->nrxchains, ic->ic_macaddr, ":");
277
278 /*
279 * Allocate Tx (4 EDCAs + HCCA + Mgt) and Rx rings.
280 */
281 for (qid = 0; qid < 6; qid++) {
282 if ((error = rt2860_alloc_tx_ring(sc, &sc->txq[qid])) != 0) {
283 device_printf(sc->sc_dev,
284 "could not allocate Tx ring %d\n", qid);
285 goto fail2;
286 }
287 }
288
289 if ((error = rt2860_alloc_rx_ring(sc, &sc->rxq)) != 0) {
290 device_printf(sc->sc_dev, "could not allocate Rx ring\n");
291 goto fail2;
292 }
293
294 if ((error = rt2860_alloc_tx_pool(sc)) != 0) {
295 device_printf(sc->sc_dev, "could not allocate Tx pool\n");
296 goto fail3;
297 }
298
299 /* mgmt ring is broken on RT2860C, use EDCA AC VO ring instead */
300 sc->mgtqid = (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) ?
301 WME_AC_VO : 5;
302
303 ic->ic_softc = sc;
304 ic->ic_name = device_get_nameunit(dev);
305 ic->ic_opmode = IEEE80211_M_STA;
306 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
307
308 /* set device capabilities */
309 ic->ic_caps =
310 IEEE80211_C_STA /* station mode */
311 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */
312 | IEEE80211_C_HOSTAP /* hostap mode */
313 | IEEE80211_C_MONITOR /* monitor mode */
314 | IEEE80211_C_AHDEMO /* adhoc demo mode */
315 | IEEE80211_C_WDS /* 4-address traffic works */
316 | IEEE80211_C_MBSS /* mesh point link mode */
317 | IEEE80211_C_SHPREAMBLE /* short preamble supported */
318 | IEEE80211_C_SHSLOT /* short slot time supported */
319 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */
320 #if 0
321 | IEEE80211_C_BGSCAN /* capable of bg scanning */
322 #endif
323 | IEEE80211_C_WME /* 802.11e */
324 ;
325
326 rt2860_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans,
327 ic->ic_channels);
328
329 ieee80211_ifattach(ic);
330
331 ic->ic_wme.wme_update = rt2860_updateedca;
332 ic->ic_scan_start = rt2860_scan_start;
333 ic->ic_scan_end = rt2860_scan_end;
334 ic->ic_getradiocaps = rt2860_getradiocaps;
335 ic->ic_set_channel = rt2860_set_channel;
336 ic->ic_updateslot = rt2860_updateslot;
337 ic->ic_update_promisc = rt2860_update_promisc;
338 ic->ic_raw_xmit = rt2860_raw_xmit;
339 sc->sc_node_free = ic->ic_node_free;
340 ic->ic_node_free = rt2860_node_free;
341 ic->ic_newassoc = rt2860_newassoc;
342 ic->ic_transmit = rt2860_transmit;
343 ic->ic_parent = rt2860_parent;
344 ic->ic_vap_create = rt2860_vap_create;
345 ic->ic_vap_delete = rt2860_vap_delete;
346
347 ieee80211_radiotap_attach(ic,
348 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
349 RT2860_TX_RADIOTAP_PRESENT,
350 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
351 RT2860_RX_RADIOTAP_PRESENT);
352
353 #ifdef RAL_DEBUG
354 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
355 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
356 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs");
357 #endif
358 if (bootverbose)
359 ieee80211_announce(ic);
360
361 return 0;
362
363 fail3: rt2860_free_rx_ring(sc, &sc->rxq);
364 fail2: while (--qid >= 0)
365 rt2860_free_tx_ring(sc, &sc->txq[qid]);
366 fail1: mtx_destroy(&sc->sc_mtx);
367 return error;
368 }
369
370 int
rt2860_detach(void * xsc)371 rt2860_detach(void *xsc)
372 {
373 struct rt2860_softc *sc = xsc;
374 struct ieee80211com *ic = &sc->sc_ic;
375 int qid;
376
377 RAL_LOCK(sc);
378 rt2860_stop_locked(sc);
379 RAL_UNLOCK(sc);
380
381 ieee80211_ifdetach(ic);
382 mbufq_drain(&sc->sc_snd);
383 for (qid = 0; qid < 6; qid++)
384 rt2860_free_tx_ring(sc, &sc->txq[qid]);
385 rt2860_free_rx_ring(sc, &sc->rxq);
386 rt2860_free_tx_pool(sc);
387
388 mtx_destroy(&sc->sc_mtx);
389
390 return 0;
391 }
392
393 void
rt2860_shutdown(void * xsc)394 rt2860_shutdown(void *xsc)
395 {
396 struct rt2860_softc *sc = xsc;
397
398 rt2860_stop(sc);
399 }
400
401 void
rt2860_suspend(void * xsc)402 rt2860_suspend(void *xsc)
403 {
404 struct rt2860_softc *sc = xsc;
405
406 rt2860_stop(sc);
407 }
408
409 void
rt2860_resume(void * xsc)410 rt2860_resume(void *xsc)
411 {
412 struct rt2860_softc *sc = xsc;
413
414 if (sc->sc_ic.ic_nrunning > 0)
415 rt2860_init(sc);
416 }
417
418 static struct ieee80211vap *
rt2860_vap_create(struct ieee80211com * ic,const char name[IFNAMSIZ],int unit,enum ieee80211_opmode opmode,int flags,const uint8_t bssid[IEEE80211_ADDR_LEN],const uint8_t mac[IEEE80211_ADDR_LEN])419 rt2860_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
420 enum ieee80211_opmode opmode, int flags,
421 const uint8_t bssid[IEEE80211_ADDR_LEN],
422 const uint8_t mac[IEEE80211_ADDR_LEN])
423 {
424 struct rt2860_softc *sc = ic->ic_softc;
425 struct rt2860_vap *rvp;
426 struct ieee80211vap *vap;
427
428 switch (opmode) {
429 case IEEE80211_M_STA:
430 case IEEE80211_M_IBSS:
431 case IEEE80211_M_AHDEMO:
432 case IEEE80211_M_MONITOR:
433 case IEEE80211_M_HOSTAP:
434 case IEEE80211_M_MBSS:
435 /* XXXRP: TBD */
436 if (!TAILQ_EMPTY(&ic->ic_vaps)) {
437 device_printf(sc->sc_dev, "only 1 vap supported\n");
438 return NULL;
439 }
440 if (opmode == IEEE80211_M_STA)
441 flags |= IEEE80211_CLONE_NOBEACONS;
442 break;
443 case IEEE80211_M_WDS:
444 if (TAILQ_EMPTY(&ic->ic_vaps) ||
445 ic->ic_opmode != IEEE80211_M_HOSTAP) {
446 device_printf(sc->sc_dev,
447 "wds only supported in ap mode\n");
448 return NULL;
449 }
450 /*
451 * Silently remove any request for a unique
452 * bssid; WDS vap's always share the local
453 * mac address.
454 */
455 flags &= ~IEEE80211_CLONE_BSSID;
456 break;
457 default:
458 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode);
459 return NULL;
460 }
461 rvp = malloc(sizeof(struct rt2860_vap), M_80211_VAP, M_WAITOK | M_ZERO);
462 vap = &rvp->ral_vap;
463 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
464
465 /* override state transition machine */
466 rvp->ral_newstate = vap->iv_newstate;
467 vap->iv_newstate = rt2860_newstate;
468 #if 0
469 vap->iv_update_beacon = rt2860_beacon_update;
470 #endif
471
472 /* HW supports up to 255 STAs (0-254) in HostAP and IBSS modes */
473 vap->iv_max_aid = min(IEEE80211_AID_MAX, RT2860_WCID_MAX);
474
475 ieee80211_ratectl_init(vap);
476 /* complete setup */
477 ieee80211_vap_attach(vap, ieee80211_media_change,
478 ieee80211_media_status, mac);
479 if (TAILQ_FIRST(&ic->ic_vaps) == vap)
480 ic->ic_opmode = opmode;
481 return vap;
482 }
483
484 static void
rt2860_vap_delete(struct ieee80211vap * vap)485 rt2860_vap_delete(struct ieee80211vap *vap)
486 {
487 struct rt2860_vap *rvp = RT2860_VAP(vap);
488
489 ieee80211_ratectl_deinit(vap);
490 ieee80211_vap_detach(vap);
491 free(rvp, M_80211_VAP);
492 }
493
494 static void
rt2860_dma_map_addr(void * arg,bus_dma_segment_t * segs,int nseg,int error)495 rt2860_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
496 {
497 if (error != 0)
498 return;
499
500 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
501
502 *(bus_addr_t *)arg = segs[0].ds_addr;
503 }
504
505 static int
rt2860_alloc_tx_ring(struct rt2860_softc * sc,struct rt2860_tx_ring * ring)506 rt2860_alloc_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
507 {
508 int size, error;
509
510 size = RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd);
511
512 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 16, 0,
513 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
514 size, 1, size, 0, NULL, NULL, &ring->desc_dmat);
515 if (error != 0) {
516 device_printf(sc->sc_dev, "could not create desc DMA tag\n");
517 goto fail;
518 }
519
520 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->txd,
521 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
522 if (error != 0) {
523 device_printf(sc->sc_dev, "could not allocate DMA memory\n");
524 goto fail;
525 }
526
527 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->txd,
528 size, rt2860_dma_map_addr, &ring->paddr, 0);
529 if (error != 0) {
530 device_printf(sc->sc_dev, "could not load desc DMA map\n");
531 goto fail;
532 }
533
534 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
535
536 return 0;
537
538 fail: rt2860_free_tx_ring(sc, ring);
539 return error;
540 }
541
542 void
rt2860_reset_tx_ring(struct rt2860_softc * sc,struct rt2860_tx_ring * ring)543 rt2860_reset_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
544 {
545 struct rt2860_tx_data *data;
546 int i;
547
548 for (i = 0; i < RT2860_TX_RING_COUNT; i++) {
549 if ((data = ring->data[i]) == NULL)
550 continue; /* nothing mapped in this slot */
551
552 if (data->m != NULL) {
553 bus_dmamap_sync(sc->txwi_dmat, data->map,
554 BUS_DMASYNC_POSTWRITE);
555 bus_dmamap_unload(sc->txwi_dmat, data->map);
556 m_freem(data->m);
557 data->m = NULL;
558 }
559 if (data->ni != NULL) {
560 ieee80211_free_node(data->ni);
561 data->ni = NULL;
562 }
563
564 SLIST_INSERT_HEAD(&sc->data_pool, data, next);
565 ring->data[i] = NULL;
566 }
567
568 ring->queued = 0;
569 ring->cur = ring->next = 0;
570 }
571
572 void
rt2860_free_tx_ring(struct rt2860_softc * sc,struct rt2860_tx_ring * ring)573 rt2860_free_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
574 {
575 struct rt2860_tx_data *data;
576 int i;
577
578 if (ring->txd != NULL) {
579 bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
580 BUS_DMASYNC_POSTWRITE);
581 bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
582 bus_dmamem_free(ring->desc_dmat, ring->txd, ring->desc_map);
583 }
584 if (ring->desc_dmat != NULL)
585 bus_dma_tag_destroy(ring->desc_dmat);
586
587 for (i = 0; i < RT2860_TX_RING_COUNT; i++) {
588 if ((data = ring->data[i]) == NULL)
589 continue; /* nothing mapped in this slot */
590
591 if (data->m != NULL) {
592 bus_dmamap_sync(sc->txwi_dmat, data->map,
593 BUS_DMASYNC_POSTWRITE);
594 bus_dmamap_unload(sc->txwi_dmat, data->map);
595 m_freem(data->m);
596 }
597 if (data->ni != NULL)
598 ieee80211_free_node(data->ni);
599
600 SLIST_INSERT_HEAD(&sc->data_pool, data, next);
601 }
602 }
603
604 /*
605 * Allocate a pool of TX Wireless Information blocks.
606 */
607 int
rt2860_alloc_tx_pool(struct rt2860_softc * sc)608 rt2860_alloc_tx_pool(struct rt2860_softc *sc)
609 {
610 caddr_t vaddr;
611 bus_addr_t paddr;
612 int i, size, error;
613
614 size = RT2860_TX_POOL_COUNT * RT2860_TXWI_DMASZ;
615
616 /* init data_pool early in case of failure.. */
617 SLIST_INIT(&sc->data_pool);
618
619 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
620 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
621 size, 1, size, 0, NULL, NULL, &sc->txwi_dmat);
622 if (error != 0) {
623 device_printf(sc->sc_dev, "could not create txwi DMA tag\n");
624 goto fail;
625 }
626
627 error = bus_dmamem_alloc(sc->txwi_dmat, (void **)&sc->txwi_vaddr,
628 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->txwi_map);
629 if (error != 0) {
630 device_printf(sc->sc_dev, "could not allocate DMA memory\n");
631 goto fail;
632 }
633
634 error = bus_dmamap_load(sc->txwi_dmat, sc->txwi_map,
635 sc->txwi_vaddr, size, rt2860_dma_map_addr, &paddr, 0);
636 if (error != 0) {
637 device_printf(sc->sc_dev, "could not load txwi DMA map\n");
638 goto fail;
639 }
640
641 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE);
642
643 vaddr = sc->txwi_vaddr;
644 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) {
645 struct rt2860_tx_data *data = &sc->data[i];
646
647 error = bus_dmamap_create(sc->txwi_dmat, 0, &data->map);
648 if (error != 0) {
649 device_printf(sc->sc_dev, "could not create DMA map\n");
650 goto fail;
651 }
652 data->txwi = (struct rt2860_txwi *)vaddr;
653 data->paddr = paddr;
654 vaddr += RT2860_TXWI_DMASZ;
655 paddr += RT2860_TXWI_DMASZ;
656
657 SLIST_INSERT_HEAD(&sc->data_pool, data, next);
658 }
659
660 return 0;
661
662 fail: rt2860_free_tx_pool(sc);
663 return error;
664 }
665
666 void
rt2860_free_tx_pool(struct rt2860_softc * sc)667 rt2860_free_tx_pool(struct rt2860_softc *sc)
668 {
669 if (sc->txwi_vaddr != NULL) {
670 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map,
671 BUS_DMASYNC_POSTWRITE);
672 bus_dmamap_unload(sc->txwi_dmat, sc->txwi_map);
673 bus_dmamem_free(sc->txwi_dmat, sc->txwi_vaddr, sc->txwi_map);
674 }
675 if (sc->txwi_dmat != NULL)
676 bus_dma_tag_destroy(sc->txwi_dmat);
677
678 while (!SLIST_EMPTY(&sc->data_pool)) {
679 struct rt2860_tx_data *data;
680 data = SLIST_FIRST(&sc->data_pool);
681 bus_dmamap_destroy(sc->txwi_dmat, data->map);
682 SLIST_REMOVE_HEAD(&sc->data_pool, next);
683 }
684 }
685
686 int
rt2860_alloc_rx_ring(struct rt2860_softc * sc,struct rt2860_rx_ring * ring)687 rt2860_alloc_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
688 {
689 bus_addr_t physaddr;
690 int i, size, error;
691
692 size = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd);
693
694 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 16, 0,
695 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
696 size, 1, size, 0, NULL, NULL, &ring->desc_dmat);
697 if (error != 0) {
698 device_printf(sc->sc_dev, "could not create desc DMA tag\n");
699 goto fail;
700 }
701
702 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->rxd,
703 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
704 if (error != 0) {
705 device_printf(sc->sc_dev, "could not allocate DMA memory\n");
706 goto fail;
707 }
708
709 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->rxd,
710 size, rt2860_dma_map_addr, &ring->paddr, 0);
711 if (error != 0) {
712 device_printf(sc->sc_dev, "could not load desc DMA map\n");
713 goto fail;
714 }
715
716 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
717 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
718 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
719 if (error != 0) {
720 device_printf(sc->sc_dev, "could not create data DMA tag\n");
721 goto fail;
722 }
723
724 for (i = 0; i < RT2860_RX_RING_COUNT; i++) {
725 struct rt2860_rx_data *data = &ring->data[i];
726 struct rt2860_rxd *rxd = &ring->rxd[i];
727
728 error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
729 if (error != 0) {
730 device_printf(sc->sc_dev, "could not create DMA map\n");
731 goto fail;
732 }
733
734 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
735 if (data->m == NULL) {
736 device_printf(sc->sc_dev,
737 "could not allocate rx mbuf\n");
738 error = ENOMEM;
739 goto fail;
740 }
741
742 error = bus_dmamap_load(ring->data_dmat, data->map,
743 mtod(data->m, void *), MCLBYTES, rt2860_dma_map_addr,
744 &physaddr, 0);
745 if (error != 0) {
746 device_printf(sc->sc_dev,
747 "could not load rx buf DMA map");
748 goto fail;
749 }
750
751 rxd->sdp0 = htole32(physaddr);
752 rxd->sdl0 = htole16(MCLBYTES);
753 }
754
755 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
756
757 return 0;
758
759 fail: rt2860_free_rx_ring(sc, ring);
760 return error;
761 }
762
763 void
rt2860_reset_rx_ring(struct rt2860_softc * sc,struct rt2860_rx_ring * ring)764 rt2860_reset_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
765 {
766 int i;
767
768 for (i = 0; i < RT2860_RX_RING_COUNT; i++)
769 ring->rxd[i].sdl0 &= ~htole16(RT2860_RX_DDONE);
770
771 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
772
773 ring->cur = 0;
774 }
775
776 void
rt2860_free_rx_ring(struct rt2860_softc * sc,struct rt2860_rx_ring * ring)777 rt2860_free_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
778 {
779 int i;
780
781 if (ring->rxd != NULL) {
782 bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
783 BUS_DMASYNC_POSTWRITE);
784 bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
785 bus_dmamem_free(ring->desc_dmat, ring->rxd, ring->desc_map);
786 }
787 if (ring->desc_dmat != NULL)
788 bus_dma_tag_destroy(ring->desc_dmat);
789
790 for (i = 0; i < RT2860_RX_RING_COUNT; i++) {
791 struct rt2860_rx_data *data = &ring->data[i];
792
793 if (data->m != NULL) {
794 bus_dmamap_sync(ring->data_dmat, data->map,
795 BUS_DMASYNC_POSTREAD);
796 bus_dmamap_unload(ring->data_dmat, data->map);
797 m_freem(data->m);
798 }
799 if (data->map != NULL)
800 bus_dmamap_destroy(ring->data_dmat, data->map);
801 }
802 if (ring->data_dmat != NULL)
803 bus_dma_tag_destroy(ring->data_dmat);
804 }
805
806 static void
rt2860_updatestats(struct rt2860_softc * sc)807 rt2860_updatestats(struct rt2860_softc *sc)
808 {
809 struct ieee80211com *ic = &sc->sc_ic;
810
811 /*
812 * In IBSS or HostAP modes (when the hardware sends beacons), the
813 * MAC can run into a livelock and start sending CTS-to-self frames
814 * like crazy if protection is enabled. Fortunately, we can detect
815 * when such a situation occurs and reset the MAC.
816 */
817 if (ic->ic_curmode != IEEE80211_M_STA) {
818 /* check if we're in a livelock situation.. */
819 uint32_t tmp = RAL_READ(sc, RT2860_DEBUG);
820 if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) {
821 /* ..and reset MAC/BBP for a while.. */
822 DPRINTF(("CTS-to-self livelock detected\n"));
823 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST);
824 RAL_BARRIER_WRITE(sc);
825 DELAY(1);
826 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL,
827 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
828 }
829 }
830 }
831
832 static void
rt2860_newassoc(struct ieee80211_node * ni,int isnew)833 rt2860_newassoc(struct ieee80211_node *ni, int isnew)
834 {
835 struct ieee80211com *ic = ni->ni_ic;
836 struct rt2860_softc *sc = ic->ic_softc;
837 uint8_t wcid;
838
839 wcid = IEEE80211_AID(ni->ni_associd);
840 if (isnew && ni->ni_associd != 0) {
841 sc->wcid2ni[wcid] = ni;
842
843 /* init WCID table entry */
844 RAL_WRITE_REGION_1(sc, RT2860_WCID_ENTRY(wcid),
845 ni->ni_macaddr, IEEE80211_ADDR_LEN);
846 }
847 DPRINTF(("new assoc isnew=%d addr=%s WCID=%d\n",
848 isnew, ether_sprintf(ni->ni_macaddr), wcid));
849 }
850
851 static void
rt2860_node_free(struct ieee80211_node * ni)852 rt2860_node_free(struct ieee80211_node *ni)
853 {
854 struct ieee80211com *ic = ni->ni_ic;
855 struct rt2860_softc *sc = ic->ic_softc;
856 uint8_t wcid;
857
858 if (ni->ni_associd != 0) {
859 wcid = IEEE80211_AID(ni->ni_associd);
860
861 /* clear Rx WCID search table entry */
862 RAL_SET_REGION_4(sc, RT2860_WCID_ENTRY(wcid), 0, 2);
863 }
864 sc->sc_node_free(ni);
865 }
866
867 #ifdef IEEE80211_HT
868 static int
rt2860_ampdu_rx_start(struct ieee80211com * ic,struct ieee80211_node * ni,uint8_t tid)869 rt2860_ampdu_rx_start(struct ieee80211com *ic, struct ieee80211_node *ni,
870 uint8_t tid)
871 {
872 struct rt2860_softc *sc = ic->ic_softc;
873 uint8_t wcid = ((struct rt2860_node *)ni)->wcid;
874 uint32_t tmp;
875
876 /* update BA session mask */
877 tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4);
878 tmp |= (1 << tid) << 16;
879 RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp);
880 return 0;
881 }
882
883 static void
rt2860_ampdu_rx_stop(struct ieee80211com * ic,struct ieee80211_node * ni,uint8_t tid)884 rt2860_ampdu_rx_stop(struct ieee80211com *ic, struct ieee80211_node *ni,
885 uint8_t tid)
886 {
887 struct rt2860_softc *sc = ic->ic_softc;
888 uint8_t wcid = ((struct rt2860_node *)ni)->wcid;
889 uint32_t tmp;
890
891 /* update BA session mask */
892 tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4);
893 tmp &= ~((1 << tid) << 16);
894 RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp);
895 }
896 #endif
897
898 static int
rt2860_newstate(struct ieee80211vap * vap,enum ieee80211_state nstate,int arg)899 rt2860_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
900 {
901 struct rt2860_vap *rvp = RT2860_VAP(vap);
902 struct ieee80211com *ic = vap->iv_ic;
903 struct rt2860_softc *sc = ic->ic_softc;
904 uint32_t tmp;
905 int error;
906
907 if (vap->iv_state == IEEE80211_S_RUN) {
908 /* turn link LED off */
909 rt2860_set_leds(sc, RT2860_LED_RADIO);
910 }
911
912 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) {
913 /* abort TSF synchronization */
914 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG);
915 RAL_WRITE(sc, RT2860_BCN_TIME_CFG,
916 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
917 RT2860_TBTT_TIMER_EN));
918 }
919
920 rt2860_set_gp_timer(sc, 0);
921
922 error = rvp->ral_newstate(vap, nstate, arg);
923 if (error != 0)
924 return (error);
925
926 if (nstate == IEEE80211_S_RUN) {
927 struct ieee80211_node *ni = vap->iv_bss;
928
929 if (ic->ic_opmode != IEEE80211_M_MONITOR) {
930 rt2860_enable_mrr(sc);
931 rt2860_set_txpreamble(sc);
932 rt2860_set_basicrates(sc, &ni->ni_rates);
933 rt2860_set_bssid(sc, ni->ni_bssid);
934 }
935
936 if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
937 vap->iv_opmode == IEEE80211_M_IBSS ||
938 vap->iv_opmode == IEEE80211_M_MBSS) {
939 error = rt2860_setup_beacon(sc, vap);
940 if (error != 0)
941 return error;
942 }
943
944 if (ic->ic_opmode != IEEE80211_M_MONITOR) {
945 rt2860_enable_tsf_sync(sc);
946 rt2860_set_gp_timer(sc, 500);
947 }
948
949 /* turn link LED on */
950 rt2860_set_leds(sc, RT2860_LED_RADIO |
951 (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan) ?
952 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ));
953 }
954 return error;
955 }
956
957 /* Read 16-bit from eFUSE ROM (>=RT3071 only.) */
958 static uint16_t
rt3090_efuse_read_2(struct rt2860_softc * sc,uint16_t addr)959 rt3090_efuse_read_2(struct rt2860_softc *sc, uint16_t addr)
960 {
961 uint32_t tmp;
962 uint16_t reg;
963 int ntries;
964
965 addr *= 2;
966 /*-
967 * Read one 16-byte block into registers EFUSE_DATA[0-3]:
968 * DATA0: F E D C
969 * DATA1: B A 9 8
970 * DATA2: 7 6 5 4
971 * DATA3: 3 2 1 0
972 */
973 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
974 tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK);
975 tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK;
976 RAL_WRITE(sc, RT3070_EFUSE_CTRL, tmp);
977 for (ntries = 0; ntries < 500; ntries++) {
978 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
979 if (!(tmp & RT3070_EFSROM_KICK))
980 break;
981 DELAY(2);
982 }
983 if (ntries == 500)
984 return 0xffff;
985
986 if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK)
987 return 0xffff; /* address not found */
988
989 /* determine to which 32-bit register our 16-bit word belongs */
990 reg = RT3070_EFUSE_DATA3 - (addr & 0xc);
991 tmp = RAL_READ(sc, reg);
992
993 return (addr & 2) ? tmp >> 16 : tmp & 0xffff;
994 }
995
996 /*
997 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46,
998 * 93C66 or 93C86).
999 */
1000 static uint16_t
rt2860_eeprom_read_2(struct rt2860_softc * sc,uint16_t addr)1001 rt2860_eeprom_read_2(struct rt2860_softc *sc, uint16_t addr)
1002 {
1003 uint32_t tmp;
1004 uint16_t val;
1005 int n;
1006
1007 /* clock C once before the first command */
1008 RT2860_EEPROM_CTL(sc, 0);
1009
1010 RT2860_EEPROM_CTL(sc, RT2860_S);
1011 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
1012 RT2860_EEPROM_CTL(sc, RT2860_S);
1013
1014 /* write start bit (1) */
1015 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D);
1016 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C);
1017
1018 /* write READ opcode (10) */
1019 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D);
1020 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C);
1021 RT2860_EEPROM_CTL(sc, RT2860_S);
1022 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
1023
1024 /* write address (A5-A0 or A7-A0) */
1025 n = ((RAL_READ(sc, RT2860_PCI_EECTRL) & 0x30) == 0) ? 5 : 7;
1026 for (; n >= 0; n--) {
1027 RT2860_EEPROM_CTL(sc, RT2860_S |
1028 (((addr >> n) & 1) << RT2860_SHIFT_D));
1029 RT2860_EEPROM_CTL(sc, RT2860_S |
1030 (((addr >> n) & 1) << RT2860_SHIFT_D) | RT2860_C);
1031 }
1032
1033 RT2860_EEPROM_CTL(sc, RT2860_S);
1034
1035 /* read data Q15-Q0 */
1036 val = 0;
1037 for (n = 15; n >= 0; n--) {
1038 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
1039 tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
1040 val |= ((tmp & RT2860_Q) >> RT2860_SHIFT_Q) << n;
1041 RT2860_EEPROM_CTL(sc, RT2860_S);
1042 }
1043
1044 RT2860_EEPROM_CTL(sc, 0);
1045
1046 /* clear Chip Select and clock C */
1047 RT2860_EEPROM_CTL(sc, RT2860_S);
1048 RT2860_EEPROM_CTL(sc, 0);
1049 RT2860_EEPROM_CTL(sc, RT2860_C);
1050
1051 return val;
1052 }
1053
1054 static __inline uint16_t
rt2860_srom_read(struct rt2860_softc * sc,uint8_t addr)1055 rt2860_srom_read(struct rt2860_softc *sc, uint8_t addr)
1056 {
1057 /* either eFUSE ROM or EEPROM */
1058 return sc->sc_srom_read(sc, addr);
1059 }
1060
1061 static void
rt2860_intr_coherent(struct rt2860_softc * sc)1062 rt2860_intr_coherent(struct rt2860_softc *sc)
1063 {
1064 uint32_t tmp;
1065
1066 /* DMA finds data coherent event when checking the DDONE bit */
1067
1068 DPRINTF(("Tx/Rx Coherent interrupt\n"));
1069
1070 /* restart DMA engine */
1071 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
1072 tmp &= ~(RT2860_TX_WB_DDONE | RT2860_RX_DMA_EN | RT2860_TX_DMA_EN);
1073 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
1074
1075 (void)rt2860_txrx_enable(sc);
1076 }
1077
1078 static void
rt2860_drain_stats_fifo(struct rt2860_softc * sc)1079 rt2860_drain_stats_fifo(struct rt2860_softc *sc)
1080 {
1081 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs;
1082 struct ieee80211_node *ni;
1083 uint32_t stat;
1084 uint8_t wcid, mcs, pid;
1085
1086 /* drain Tx status FIFO (maxsize = 16) */
1087 txs->flags = IEEE80211_RATECTL_STATUS_LONG_RETRY;
1088 while ((stat = RAL_READ(sc, RT2860_TX_STAT_FIFO)) & RT2860_TXQ_VLD) {
1089 DPRINTFN(4, ("tx stat 0x%08x\n", stat));
1090
1091 wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff;
1092 if (wcid > RT2860_WCID_MAX)
1093 continue;
1094 ni = sc->wcid2ni[wcid];
1095
1096 /* if no ACK was requested, no feedback is available */
1097 if (!(stat & RT2860_TXQ_ACKREQ) || ni == NULL)
1098 continue;
1099
1100 /* update per-STA AMRR stats */
1101 if (stat & RT2860_TXQ_OK) {
1102 /*
1103 * Check if there were retries, ie if the Tx success
1104 * rate is different from the requested rate. Note
1105 * that it works only because we do not allow rate
1106 * fallback from OFDM to CCK.
1107 */
1108 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f;
1109 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf;
1110 if (mcs + 1 != pid)
1111 txs->long_retries = 1;
1112 else
1113 txs->long_retries = 0;
1114 txs->status = IEEE80211_RATECTL_TX_SUCCESS;
1115 ieee80211_ratectl_tx_complete(ni, txs);
1116 } else {
1117 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED;
1118 txs->long_retries = 1; /* XXX */
1119 ieee80211_ratectl_tx_complete(ni, txs);
1120 if_inc_counter(ni->ni_vap->iv_ifp,
1121 IFCOUNTER_OERRORS, 1);
1122 }
1123 }
1124 }
1125
1126 static void
rt2860_tx_intr(struct rt2860_softc * sc,int qid)1127 rt2860_tx_intr(struct rt2860_softc *sc, int qid)
1128 {
1129 struct rt2860_tx_ring *ring = &sc->txq[qid];
1130 uint32_t hw;
1131
1132 rt2860_drain_stats_fifo(sc);
1133
1134 hw = RAL_READ(sc, RT2860_TX_DTX_IDX(qid));
1135 while (ring->next != hw) {
1136 struct rt2860_tx_data *data = ring->data[ring->next];
1137
1138 if (data != NULL) {
1139 bus_dmamap_sync(sc->txwi_dmat, data->map,
1140 BUS_DMASYNC_POSTWRITE);
1141 bus_dmamap_unload(sc->txwi_dmat, data->map);
1142 ieee80211_tx_complete(data->ni, data->m, 0);
1143 data->ni = NULL;
1144 data->m = NULL;
1145 SLIST_INSERT_HEAD(&sc->data_pool, data, next);
1146 ring->data[ring->next] = NULL;
1147 }
1148 ring->queued--;
1149 ring->next = (ring->next + 1) % RT2860_TX_RING_COUNT;
1150 }
1151
1152 sc->sc_tx_timer = 0;
1153 if (ring->queued < RT2860_TX_RING_COUNT)
1154 sc->qfullmsk &= ~(1 << qid);
1155 rt2860_start(sc);
1156 }
1157
1158 /*
1159 * Return the Rx chain with the highest RSSI for a given frame.
1160 */
1161 static __inline uint8_t
rt2860_maxrssi_chain(struct rt2860_softc * sc,const struct rt2860_rxwi * rxwi)1162 rt2860_maxrssi_chain(struct rt2860_softc *sc, const struct rt2860_rxwi *rxwi)
1163 {
1164 uint8_t rxchain = 0;
1165
1166 if (sc->nrxchains > 1) {
1167 if (rxwi->rssi[1] > rxwi->rssi[rxchain])
1168 rxchain = 1;
1169 if (sc->nrxchains > 2)
1170 if (rxwi->rssi[2] > rxwi->rssi[rxchain])
1171 rxchain = 2;
1172 }
1173 return rxchain;
1174 }
1175
1176 static void
rt2860_rx_intr(struct rt2860_softc * sc)1177 rt2860_rx_intr(struct rt2860_softc *sc)
1178 {
1179 struct rt2860_rx_radiotap_header *tap;
1180 struct ieee80211com *ic = &sc->sc_ic;
1181 struct ieee80211_frame *wh;
1182 struct ieee80211_node *ni;
1183 struct mbuf *m, *m1;
1184 bus_addr_t physaddr;
1185 uint32_t hw;
1186 uint16_t phy;
1187 uint8_t ant;
1188 int8_t rssi, nf;
1189 int error;
1190
1191 hw = RAL_READ(sc, RT2860_FS_DRX_IDX) & 0xfff;
1192 while (sc->rxq.cur != hw) {
1193 struct rt2860_rx_data *data = &sc->rxq.data[sc->rxq.cur];
1194 struct rt2860_rxd *rxd = &sc->rxq.rxd[sc->rxq.cur];
1195 struct rt2860_rxwi *rxwi;
1196
1197 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
1198 BUS_DMASYNC_POSTREAD);
1199
1200 if (__predict_false(!(rxd->sdl0 & htole16(RT2860_RX_DDONE)))) {
1201 DPRINTF(("RXD DDONE bit not set!\n"));
1202 break; /* should not happen */
1203 }
1204
1205 if (__predict_false(rxd->flags &
1206 htole32(RT2860_RX_CRCERR | RT2860_RX_ICVERR))) {
1207 counter_u64_add(ic->ic_ierrors, 1);
1208 goto skip;
1209 }
1210
1211 #ifdef HW_CRYPTO
1212 if (__predict_false(rxd->flags & htole32(RT2860_RX_MICERR))) {
1213 /* report MIC failures to net80211 for TKIP */
1214 ic->ic_stats.is_rx_locmicfail++;
1215 ieee80211_michael_mic_failure(ic, 0/* XXX */);
1216 counter_u64_add(ic->ic_ierrors, 1);
1217 goto skip;
1218 }
1219 #endif
1220
1221 m1 = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
1222 if (__predict_false(m1 == NULL)) {
1223 counter_u64_add(ic->ic_ierrors, 1);
1224 goto skip;
1225 }
1226
1227 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
1228 BUS_DMASYNC_POSTREAD);
1229 bus_dmamap_unload(sc->rxq.data_dmat, data->map);
1230
1231 error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
1232 mtod(m1, void *), MCLBYTES, rt2860_dma_map_addr,
1233 &physaddr, 0);
1234 if (__predict_false(error != 0)) {
1235 m_freem(m1);
1236
1237 /* try to reload the old mbuf */
1238 error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
1239 mtod(data->m, void *), MCLBYTES,
1240 rt2860_dma_map_addr, &physaddr, 0);
1241 if (__predict_false(error != 0)) {
1242 panic("%s: could not load old rx mbuf",
1243 device_get_name(sc->sc_dev));
1244 }
1245 /* physical address may have changed */
1246 rxd->sdp0 = htole32(physaddr);
1247 counter_u64_add(ic->ic_ierrors, 1);
1248 goto skip;
1249 }
1250
1251 /*
1252 * New mbuf successfully loaded, update Rx ring and continue
1253 * processing.
1254 */
1255 m = data->m;
1256 data->m = m1;
1257 rxd->sdp0 = htole32(physaddr);
1258
1259 rxwi = mtod(m, struct rt2860_rxwi *);
1260
1261 /* finalize mbuf */
1262 m->m_data = (caddr_t)(rxwi + 1);
1263 m->m_pkthdr.len = m->m_len = le16toh(rxwi->len) & 0xfff;
1264
1265 wh = mtod(m, struct ieee80211_frame *);
1266 #ifdef HW_CRYPTO
1267 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
1268 /* frame is decrypted by hardware */
1269 wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
1270 }
1271 #endif
1272
1273 /* HW may insert 2 padding bytes after 802.11 header */
1274 if (rxd->flags & htole32(RT2860_RX_L2PAD)) {
1275 u_int hdrlen = ieee80211_hdrsize(wh);
1276 ovbcopy(wh, (caddr_t)wh + 2, hdrlen);
1277 m->m_data += 2;
1278 wh = mtod(m, struct ieee80211_frame *);
1279 }
1280
1281 ant = rt2860_maxrssi_chain(sc, rxwi);
1282 rssi = rt2860_rssi2dbm(sc, rxwi->rssi[ant], ant);
1283 nf = RT2860_NOISE_FLOOR;
1284
1285 if (ieee80211_radiotap_active(ic)) {
1286 tap = &sc->sc_rxtap;
1287 tap->wr_flags = 0;
1288 tap->wr_antenna = ant;
1289 tap->wr_antsignal = nf + rssi;
1290 tap->wr_antnoise = nf;
1291 /* in case it can't be found below */
1292 tap->wr_rate = 2;
1293 phy = le16toh(rxwi->phy);
1294 switch (phy & RT2860_PHY_MODE) {
1295 case RT2860_PHY_CCK:
1296 switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) {
1297 case 0: tap->wr_rate = 2; break;
1298 case 1: tap->wr_rate = 4; break;
1299 case 2: tap->wr_rate = 11; break;
1300 case 3: tap->wr_rate = 22; break;
1301 }
1302 if (phy & RT2860_PHY_SHPRE)
1303 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
1304 break;
1305 case RT2860_PHY_OFDM:
1306 switch (phy & RT2860_PHY_MCS) {
1307 case 0: tap->wr_rate = 12; break;
1308 case 1: tap->wr_rate = 18; break;
1309 case 2: tap->wr_rate = 24; break;
1310 case 3: tap->wr_rate = 36; break;
1311 case 4: tap->wr_rate = 48; break;
1312 case 5: tap->wr_rate = 72; break;
1313 case 6: tap->wr_rate = 96; break;
1314 case 7: tap->wr_rate = 108; break;
1315 }
1316 break;
1317 }
1318 }
1319
1320 RAL_UNLOCK(sc);
1321 wh = mtod(m, struct ieee80211_frame *);
1322
1323 /* send the frame to the 802.11 layer */
1324 ni = ieee80211_find_rxnode(ic,
1325 (struct ieee80211_frame_min *)wh);
1326 if (ni != NULL) {
1327 (void)ieee80211_input(ni, m, rssi - nf, nf);
1328 ieee80211_free_node(ni);
1329 } else
1330 (void)ieee80211_input_all(ic, m, rssi - nf, nf);
1331
1332 RAL_LOCK(sc);
1333
1334 skip: rxd->sdl0 &= ~htole16(RT2860_RX_DDONE);
1335
1336 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
1337 BUS_DMASYNC_PREWRITE);
1338
1339 sc->rxq.cur = (sc->rxq.cur + 1) % RT2860_RX_RING_COUNT;
1340 }
1341
1342 /* tell HW what we have processed */
1343 RAL_WRITE(sc, RT2860_RX_CALC_IDX,
1344 (sc->rxq.cur - 1) % RT2860_RX_RING_COUNT);
1345 }
1346
1347 static void
rt2860_tbtt_intr(struct rt2860_softc * sc)1348 rt2860_tbtt_intr(struct rt2860_softc *sc)
1349 {
1350 #if 0
1351 struct ieee80211com *ic = &sc->sc_ic;
1352
1353 #ifndef IEEE80211_STA_ONLY
1354 if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
1355 /* one less beacon until next DTIM */
1356 if (ic->ic_dtim_count == 0)
1357 ic->ic_dtim_count = ic->ic_dtim_period - 1;
1358 else
1359 ic->ic_dtim_count--;
1360
1361 /* update dynamic parts of beacon */
1362 rt2860_setup_beacon(sc);
1363
1364 /* flush buffered multicast frames */
1365 if (ic->ic_dtim_count == 0)
1366 ieee80211_notify_dtim(ic);
1367 }
1368 #endif
1369 /* check if protection mode has changed */
1370 if ((sc->sc_ic_flags ^ ic->ic_flags) & IEEE80211_F_USEPROT) {
1371 rt2860_updateprot(sc);
1372 sc->sc_ic_flags = ic->ic_flags;
1373 }
1374 #endif
1375 }
1376
1377 static void
rt2860_gp_intr(struct rt2860_softc * sc)1378 rt2860_gp_intr(struct rt2860_softc *sc)
1379 {
1380 struct ieee80211com *ic = &sc->sc_ic;
1381 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
1382
1383 DPRINTFN(2, ("GP timeout state=%d\n", vap->iv_state));
1384
1385 if (vap->iv_state == IEEE80211_S_RUN)
1386 rt2860_updatestats(sc);
1387 }
1388
1389 void
rt2860_intr(void * arg)1390 rt2860_intr(void *arg)
1391 {
1392 struct rt2860_softc *sc = arg;
1393 uint32_t r;
1394
1395 RAL_LOCK(sc);
1396
1397 r = RAL_READ(sc, RT2860_INT_STATUS);
1398 if (__predict_false(r == 0xffffffff)) {
1399 RAL_UNLOCK(sc);
1400 return; /* device likely went away */
1401 }
1402 if (r == 0) {
1403 RAL_UNLOCK(sc);
1404 return; /* not for us */
1405 }
1406
1407 /* acknowledge interrupts */
1408 RAL_WRITE(sc, RT2860_INT_STATUS, r);
1409
1410 if (r & RT2860_TX_RX_COHERENT)
1411 rt2860_intr_coherent(sc);
1412
1413 if (r & RT2860_MAC_INT_2) /* TX status */
1414 rt2860_drain_stats_fifo(sc);
1415
1416 if (r & RT2860_TX_DONE_INT5)
1417 rt2860_tx_intr(sc, 5);
1418
1419 if (r & RT2860_RX_DONE_INT)
1420 rt2860_rx_intr(sc);
1421
1422 if (r & RT2860_TX_DONE_INT4)
1423 rt2860_tx_intr(sc, 4);
1424
1425 if (r & RT2860_TX_DONE_INT3)
1426 rt2860_tx_intr(sc, 3);
1427
1428 if (r & RT2860_TX_DONE_INT2)
1429 rt2860_tx_intr(sc, 2);
1430
1431 if (r & RT2860_TX_DONE_INT1)
1432 rt2860_tx_intr(sc, 1);
1433
1434 if (r & RT2860_TX_DONE_INT0)
1435 rt2860_tx_intr(sc, 0);
1436
1437 if (r & RT2860_MAC_INT_0) /* TBTT */
1438 rt2860_tbtt_intr(sc);
1439
1440 if (r & RT2860_MAC_INT_3) /* Auto wakeup */
1441 /* TBD wakeup */;
1442
1443 if (r & RT2860_MAC_INT_4) /* GP timer */
1444 rt2860_gp_intr(sc);
1445
1446 RAL_UNLOCK(sc);
1447 }
1448
1449 static int
rt2860_tx(struct rt2860_softc * sc,struct mbuf * m,struct ieee80211_node * ni)1450 rt2860_tx(struct rt2860_softc *sc, struct mbuf *m, struct ieee80211_node *ni)
1451 {
1452 struct ieee80211com *ic = &sc->sc_ic;
1453 struct ieee80211vap *vap = ni->ni_vap;
1454 struct rt2860_tx_ring *ring;
1455 struct rt2860_tx_data *data;
1456 struct rt2860_txd *txd;
1457 struct rt2860_txwi *txwi;
1458 struct ieee80211_frame *wh;
1459 const struct ieee80211_txparam *tp = ni->ni_txparms;
1460 struct ieee80211_key *k;
1461 struct mbuf *m1;
1462 bus_dma_segment_t segs[RT2860_MAX_SCATTER];
1463 bus_dma_segment_t *seg;
1464 u_int hdrlen;
1465 uint16_t qos, dur;
1466 uint8_t type, qsel, mcs, pid, qid;
1467 int i, nsegs, ntxds, pad, rate, ridx, error;
1468
1469 /* the data pool contains at least one element, pick the first */
1470 data = SLIST_FIRST(&sc->data_pool);
1471
1472 wh = mtod(m, struct ieee80211_frame *);
1473
1474 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
1475 k = ieee80211_crypto_encap(ni, m);
1476 if (k == NULL) {
1477 m_freem(m);
1478 return ENOBUFS;
1479 }
1480
1481 /* packet header may have moved, reset our local pointer */
1482 wh = mtod(m, struct ieee80211_frame *);
1483 }
1484
1485 hdrlen = ieee80211_anyhdrsize(wh);
1486 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
1487
1488 if (m->m_flags & M_EAPOL) {
1489 rate = tp->mgmtrate;
1490 } else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1491 rate = tp->mcastrate;
1492 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
1493 rate = tp->ucastrate;
1494 } else {
1495 (void) ieee80211_ratectl_rate(ni, NULL, 0);
1496 rate = ni->ni_txrate;
1497 }
1498 rate &= IEEE80211_RATE_VAL;
1499
1500 qid = M_WME_GETAC(m);
1501 if (IEEE80211_QOS_HAS_SEQ(wh)) {
1502 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0];
1503 } else {
1504 qos = 0;
1505 }
1506 ring = &sc->txq[qid];
1507 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt, rate);
1508
1509 /* get MCS code from rate index */
1510 mcs = rt2860_rates[ridx].mcs;
1511
1512 /* setup TX Wireless Information */
1513 txwi = data->txwi;
1514 txwi->flags = 0;
1515 /* let HW generate seq numbers for non-QoS frames */
1516 txwi->xflags = qos ? 0 : RT2860_TX_NSEQ;
1517 if (type == IEEE80211_FC0_TYPE_DATA)
1518 txwi->wcid = IEEE80211_AID(ni->ni_associd);
1519 else
1520 txwi->wcid = 0xff;
1521 txwi->len = htole16(m->m_pkthdr.len);
1522 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
1523 txwi->phy = htole16(RT2860_PHY_CCK);
1524 if (ridx != RT2860_RIDX_CCK1 &&
1525 (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
1526 mcs |= RT2860_PHY_SHPRE;
1527 } else
1528 txwi->phy = htole16(RT2860_PHY_OFDM);
1529 txwi->phy |= htole16(mcs);
1530
1531 /*
1532 * We store the MCS code into the driver-private PacketID field.
1533 * The PacketID is latched into TX_STAT_FIFO when Tx completes so
1534 * that we know at which initial rate the frame was transmitted.
1535 * We add 1 to the MCS code because setting the PacketID field to
1536 * 0 means that we don't want feedback in TX_STAT_FIFO.
1537 */
1538 pid = (mcs + 1) & 0xf;
1539 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT);
1540
1541 /* check if RTS/CTS or CTS-to-self protection is required */
1542 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
1543 (m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold ||
1544 ((ic->ic_flags & IEEE80211_F_USEPROT) &&
1545 rt2860_rates[ridx].phy == IEEE80211_T_OFDM)))
1546 txwi->txop = RT2860_TX_TXOP_HT;
1547 else
1548 txwi->txop = RT2860_TX_TXOP_BACKOFF;
1549
1550 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
1551 (!qos || (qos & IEEE80211_QOS_ACKPOLICY) !=
1552 IEEE80211_QOS_ACKPOLICY_NOACK)) {
1553 txwi->xflags |= RT2860_TX_ACK;
1554
1555 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
1556 dur = rt2860_rates[ridx].sp_ack_dur;
1557 else
1558 dur = rt2860_rates[ridx].lp_ack_dur;
1559 *(uint16_t *)wh->i_dur = htole16(dur);
1560 }
1561 /* ask MAC to insert timestamp into probe responses */
1562 if ((wh->i_fc[0] &
1563 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
1564 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
1565 /* NOTE: beacons do not pass through tx_data() */
1566 txwi->flags |= RT2860_TX_TS;
1567
1568 if (ieee80211_radiotap_active_vap(vap)) {
1569 struct rt2860_tx_radiotap_header *tap = &sc->sc_txtap;
1570
1571 tap->wt_flags = 0;
1572 tap->wt_rate = rate;
1573 if (mcs & RT2860_PHY_SHPRE)
1574 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
1575
1576 ieee80211_radiotap_tx(vap, m);
1577 }
1578
1579 pad = (hdrlen + 3) & ~3;
1580
1581 /* copy and trim 802.11 header */
1582 memcpy(txwi + 1, wh, hdrlen);
1583 m_adj(m, hdrlen);
1584
1585 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, segs,
1586 &nsegs, 0);
1587 if (__predict_false(error != 0 && error != EFBIG)) {
1588 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n",
1589 error);
1590 m_freem(m);
1591 return error;
1592 }
1593 if (__predict_true(error == 0)) {
1594 /* determine how many TXDs are required */
1595 ntxds = 1 + (nsegs / 2);
1596
1597 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) {
1598 /* not enough free TXDs, force mbuf defrag */
1599 bus_dmamap_unload(sc->txwi_dmat, data->map);
1600 error = EFBIG;
1601 }
1602 }
1603 if (__predict_false(error != 0)) {
1604 m1 = m_defrag(m, M_NOWAIT);
1605 if (m1 == NULL) {
1606 device_printf(sc->sc_dev,
1607 "could not defragment mbuf\n");
1608 m_freem(m);
1609 return ENOBUFS;
1610 }
1611 m = m1;
1612
1613 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m,
1614 segs, &nsegs, 0);
1615 if (__predict_false(error != 0)) {
1616 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n",
1617 error);
1618 m_freem(m);
1619 return error;
1620 }
1621
1622 /* determine how many TXDs are now required */
1623 ntxds = 1 + (nsegs / 2);
1624
1625 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) {
1626 /* this is a hopeless case, drop the mbuf! */
1627 bus_dmamap_unload(sc->txwi_dmat, data->map);
1628 m_freem(m);
1629 return ENOBUFS;
1630 }
1631 }
1632
1633 qsel = (qid < WME_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT;
1634
1635 /* first segment is TXWI + 802.11 header */
1636 txd = &ring->txd[ring->cur];
1637 txd->sdp0 = htole32(data->paddr);
1638 txd->sdl0 = htole16(sizeof (struct rt2860_txwi) + pad);
1639 txd->flags = qsel;
1640
1641 /* setup payload segments */
1642 seg = &segs[0];
1643 for (i = nsegs; i >= 2; i -= 2) {
1644 txd->sdp1 = htole32(seg->ds_addr);
1645 txd->sdl1 = htole16(seg->ds_len);
1646 seg++;
1647 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
1648 /* grab a new Tx descriptor */
1649 txd = &ring->txd[ring->cur];
1650 txd->sdp0 = htole32(seg->ds_addr);
1651 txd->sdl0 = htole16(seg->ds_len);
1652 txd->flags = qsel;
1653 seg++;
1654 }
1655 /* finalize last segment */
1656 if (i > 0) {
1657 txd->sdp1 = htole32(seg->ds_addr);
1658 txd->sdl1 = htole16(seg->ds_len | RT2860_TX_LS1);
1659 } else {
1660 txd->sdl0 |= htole16(RT2860_TX_LS0);
1661 txd->sdl1 = 0;
1662 }
1663
1664 /* remove from the free pool and link it into the SW Tx slot */
1665 SLIST_REMOVE_HEAD(&sc->data_pool, next);
1666 data->m = m;
1667 data->ni = ni;
1668 ring->data[ring->cur] = data;
1669
1670 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE);
1671 bus_dmamap_sync(sc->txwi_dmat, data->map, BUS_DMASYNC_PREWRITE);
1672 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
1673
1674 DPRINTFN(4, ("sending frame qid=%d wcid=%d nsegs=%d ridx=%d\n",
1675 qid, txwi->wcid, nsegs, ridx));
1676
1677 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
1678 ring->queued += ntxds;
1679 if (ring->queued >= RT2860_TX_RING_COUNT)
1680 sc->qfullmsk |= 1 << qid;
1681
1682 /* kick Tx */
1683 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur);
1684
1685 return 0;
1686 }
1687
1688 static int
rt2860_raw_xmit(struct ieee80211_node * ni,struct mbuf * m,const struct ieee80211_bpf_params * params)1689 rt2860_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
1690 const struct ieee80211_bpf_params *params)
1691 {
1692 struct ieee80211com *ic = ni->ni_ic;
1693 struct rt2860_softc *sc = ic->ic_softc;
1694 int error;
1695
1696 RAL_LOCK(sc);
1697
1698 /* prevent management frames from being sent if we're not ready */
1699 if (!(sc->sc_flags & RT2860_RUNNING)) {
1700 RAL_UNLOCK(sc);
1701 m_freem(m);
1702 return ENETDOWN;
1703 }
1704 if (params == NULL) {
1705 /*
1706 * Legacy path; interpret frame contents to decide
1707 * precisely how to send the frame.
1708 */
1709 error = rt2860_tx(sc, m, ni);
1710 } else {
1711 /*
1712 * Caller supplied explicit parameters to use in
1713 * sending the frame.
1714 */
1715 error = rt2860_tx_raw(sc, m, ni, params);
1716 }
1717 sc->sc_tx_timer = 5;
1718 RAL_UNLOCK(sc);
1719 return error;
1720 }
1721
1722 static int
rt2860_tx_raw(struct rt2860_softc * sc,struct mbuf * m,struct ieee80211_node * ni,const struct ieee80211_bpf_params * params)1723 rt2860_tx_raw(struct rt2860_softc *sc, struct mbuf *m,
1724 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params)
1725 {
1726 struct ieee80211com *ic = &sc->sc_ic;
1727 struct ieee80211vap *vap = ni->ni_vap;
1728 struct rt2860_tx_ring *ring;
1729 struct rt2860_tx_data *data;
1730 struct rt2860_txd *txd;
1731 struct rt2860_txwi *txwi;
1732 struct ieee80211_frame *wh;
1733 struct mbuf *m1;
1734 bus_dma_segment_t segs[RT2860_MAX_SCATTER];
1735 bus_dma_segment_t *seg;
1736 u_int hdrlen;
1737 uint16_t dur;
1738 uint8_t qsel, mcs, pid, qid;
1739 int i, nsegs, ntxds, pad, rate, ridx, error;
1740
1741 /* the data pool contains at least one element, pick the first */
1742 data = SLIST_FIRST(&sc->data_pool);
1743
1744 wh = mtod(m, struct ieee80211_frame *);
1745 hdrlen = ieee80211_hdrsize(wh);
1746
1747 /* Choose a TX rate index. */
1748 rate = params->ibp_rate0;
1749 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt,
1750 rate & IEEE80211_RATE_VAL);
1751 if (ridx == (uint8_t)-1) {
1752 /* XXX fall back to mcast/mgmt rate? */
1753 m_freem(m);
1754 return EINVAL;
1755 }
1756
1757 qid = params->ibp_pri & 3;
1758 ring = &sc->txq[qid];
1759
1760 /* get MCS code from rate index */
1761 mcs = rt2860_rates[ridx].mcs;
1762
1763 /* setup TX Wireless Information */
1764 txwi = data->txwi;
1765 txwi->flags = 0;
1766 /* let HW generate seq numbers for non-QoS frames */
1767 txwi->xflags = params->ibp_pri & 3 ? 0 : RT2860_TX_NSEQ;
1768 txwi->wcid = 0xff;
1769 txwi->len = htole16(m->m_pkthdr.len);
1770 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
1771 txwi->phy = htole16(RT2860_PHY_CCK);
1772 if (ridx != RT2860_RIDX_CCK1 &&
1773 (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
1774 mcs |= RT2860_PHY_SHPRE;
1775 } else
1776 txwi->phy = htole16(RT2860_PHY_OFDM);
1777 txwi->phy |= htole16(mcs);
1778
1779 /*
1780 * We store the MCS code into the driver-private PacketID field.
1781 * The PacketID is latched into TX_STAT_FIFO when Tx completes so
1782 * that we know at which initial rate the frame was transmitted.
1783 * We add 1 to the MCS code because setting the PacketID field to
1784 * 0 means that we don't want feedback in TX_STAT_FIFO.
1785 */
1786 pid = (mcs + 1) & 0xf;
1787 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT);
1788
1789 /* check if RTS/CTS or CTS-to-self protection is required */
1790 if (params->ibp_flags & IEEE80211_BPF_RTS ||
1791 params->ibp_flags & IEEE80211_BPF_CTS)
1792 txwi->txop = RT2860_TX_TXOP_HT;
1793 else
1794 txwi->txop = RT2860_TX_TXOP_BACKOFF;
1795 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) {
1796 txwi->xflags |= RT2860_TX_ACK;
1797
1798 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
1799 dur = rt2860_rates[ridx].sp_ack_dur;
1800 else
1801 dur = rt2860_rates[ridx].lp_ack_dur;
1802 *(uint16_t *)wh->i_dur = htole16(dur);
1803 }
1804 /* ask MAC to insert timestamp into probe responses */
1805 if ((wh->i_fc[0] &
1806 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
1807 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
1808 /* NOTE: beacons do not pass through tx_data() */
1809 txwi->flags |= RT2860_TX_TS;
1810
1811 if (ieee80211_radiotap_active_vap(vap)) {
1812 struct rt2860_tx_radiotap_header *tap = &sc->sc_txtap;
1813
1814 tap->wt_flags = 0;
1815 tap->wt_rate = rate;
1816 if (mcs & RT2860_PHY_SHPRE)
1817 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
1818
1819 ieee80211_radiotap_tx(vap, m);
1820 }
1821
1822 pad = (hdrlen + 3) & ~3;
1823
1824 /* copy and trim 802.11 header */
1825 memcpy(txwi + 1, wh, hdrlen);
1826 m_adj(m, hdrlen);
1827
1828 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, segs,
1829 &nsegs, 0);
1830 if (__predict_false(error != 0 && error != EFBIG)) {
1831 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n",
1832 error);
1833 m_freem(m);
1834 return error;
1835 }
1836 if (__predict_true(error == 0)) {
1837 /* determine how many TXDs are required */
1838 ntxds = 1 + (nsegs / 2);
1839
1840 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) {
1841 /* not enough free TXDs, force mbuf defrag */
1842 bus_dmamap_unload(sc->txwi_dmat, data->map);
1843 error = EFBIG;
1844 }
1845 }
1846 if (__predict_false(error != 0)) {
1847 m1 = m_defrag(m, M_NOWAIT);
1848 if (m1 == NULL) {
1849 device_printf(sc->sc_dev,
1850 "could not defragment mbuf\n");
1851 m_freem(m);
1852 return ENOBUFS;
1853 }
1854 m = m1;
1855
1856 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m,
1857 segs, &nsegs, 0);
1858 if (__predict_false(error != 0)) {
1859 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n",
1860 error);
1861 m_freem(m);
1862 return error;
1863 }
1864
1865 /* determine how many TXDs are now required */
1866 ntxds = 1 + (nsegs / 2);
1867
1868 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) {
1869 /* this is a hopeless case, drop the mbuf! */
1870 bus_dmamap_unload(sc->txwi_dmat, data->map);
1871 m_freem(m);
1872 return ENOBUFS;
1873 }
1874 }
1875
1876 qsel = (qid < WME_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT;
1877
1878 /* first segment is TXWI + 802.11 header */
1879 txd = &ring->txd[ring->cur];
1880 txd->sdp0 = htole32(data->paddr);
1881 txd->sdl0 = htole16(sizeof (struct rt2860_txwi) + pad);
1882 txd->flags = qsel;
1883
1884 /* setup payload segments */
1885 seg = &segs[0];
1886 for (i = nsegs; i >= 2; i -= 2) {
1887 txd->sdp1 = htole32(seg->ds_addr);
1888 txd->sdl1 = htole16(seg->ds_len);
1889 seg++;
1890 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
1891 /* grab a new Tx descriptor */
1892 txd = &ring->txd[ring->cur];
1893 txd->sdp0 = htole32(seg->ds_addr);
1894 txd->sdl0 = htole16(seg->ds_len);
1895 txd->flags = qsel;
1896 seg++;
1897 }
1898 /* finalize last segment */
1899 if (i > 0) {
1900 txd->sdp1 = htole32(seg->ds_addr);
1901 txd->sdl1 = htole16(seg->ds_len | RT2860_TX_LS1);
1902 } else {
1903 txd->sdl0 |= htole16(RT2860_TX_LS0);
1904 txd->sdl1 = 0;
1905 }
1906
1907 /* remove from the free pool and link it into the SW Tx slot */
1908 SLIST_REMOVE_HEAD(&sc->data_pool, next);
1909 data->m = m;
1910 data->ni = ni;
1911 ring->data[ring->cur] = data;
1912
1913 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE);
1914 bus_dmamap_sync(sc->txwi_dmat, data->map, BUS_DMASYNC_PREWRITE);
1915 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
1916
1917 DPRINTFN(4, ("sending frame qid=%d wcid=%d nsegs=%d ridx=%d\n",
1918 qid, txwi->wcid, nsegs, ridx));
1919
1920 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
1921 ring->queued += ntxds;
1922 if (ring->queued >= RT2860_TX_RING_COUNT)
1923 sc->qfullmsk |= 1 << qid;
1924
1925 /* kick Tx */
1926 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur);
1927
1928 return 0;
1929 }
1930
1931 static int
rt2860_transmit(struct ieee80211com * ic,struct mbuf * m)1932 rt2860_transmit(struct ieee80211com *ic, struct mbuf *m)
1933 {
1934 struct rt2860_softc *sc = ic->ic_softc;
1935 int error;
1936
1937 RAL_LOCK(sc);
1938 if ((sc->sc_flags & RT2860_RUNNING) == 0) {
1939 RAL_UNLOCK(sc);
1940 return (ENXIO);
1941 }
1942 error = mbufq_enqueue(&sc->sc_snd, m);
1943 if (error) {
1944 RAL_UNLOCK(sc);
1945 return (error);
1946 }
1947 rt2860_start(sc);
1948 RAL_UNLOCK(sc);
1949
1950 return (0);
1951 }
1952
1953 static void
rt2860_start(struct rt2860_softc * sc)1954 rt2860_start(struct rt2860_softc *sc)
1955 {
1956 struct ieee80211_node *ni;
1957 struct mbuf *m;
1958
1959 RAL_LOCK_ASSERT(sc);
1960
1961 if ((sc->sc_flags & RT2860_RUNNING) == 0)
1962 return;
1963
1964 while (!SLIST_EMPTY(&sc->data_pool) && sc->qfullmsk == 0 &&
1965 (m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
1966 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
1967 if (rt2860_tx(sc, m, ni) != 0) {
1968 if_inc_counter(ni->ni_vap->iv_ifp,
1969 IFCOUNTER_OERRORS, 1);
1970 ieee80211_free_node(ni);
1971 continue;
1972 }
1973 sc->sc_tx_timer = 5;
1974 }
1975 }
1976
1977 static void
rt2860_watchdog(void * arg)1978 rt2860_watchdog(void *arg)
1979 {
1980 struct rt2860_softc *sc = arg;
1981
1982 RAL_LOCK_ASSERT(sc);
1983
1984 KASSERT(sc->sc_flags & RT2860_RUNNING, ("not running"));
1985
1986 if (sc->sc_invalid) /* card ejected */
1987 return;
1988
1989 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) {
1990 device_printf(sc->sc_dev, "device timeout\n");
1991 rt2860_stop_locked(sc);
1992 rt2860_init_locked(sc);
1993 counter_u64_add(sc->sc_ic.ic_oerrors, 1);
1994 return;
1995 }
1996 callout_reset(&sc->watchdog_ch, hz, rt2860_watchdog, sc);
1997 }
1998
1999 static void
rt2860_parent(struct ieee80211com * ic)2000 rt2860_parent(struct ieee80211com *ic)
2001 {
2002 struct rt2860_softc *sc = ic->ic_softc;
2003 int startall = 0;
2004
2005 RAL_LOCK(sc);
2006 if (ic->ic_nrunning> 0) {
2007 if (!(sc->sc_flags & RT2860_RUNNING)) {
2008 rt2860_init_locked(sc);
2009 startall = 1;
2010 } else
2011 rt2860_update_promisc(ic);
2012 } else if (sc->sc_flags & RT2860_RUNNING)
2013 rt2860_stop_locked(sc);
2014 RAL_UNLOCK(sc);
2015 if (startall)
2016 ieee80211_start_all(ic);
2017 }
2018
2019 /*
2020 * Reading and writing from/to the BBP is different from RT2560 and RT2661.
2021 * We access the BBP through the 8051 microcontroller unit which means that
2022 * the microcode must be loaded first.
2023 */
2024 void
rt2860_mcu_bbp_write(struct rt2860_softc * sc,uint8_t reg,uint8_t val)2025 rt2860_mcu_bbp_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val)
2026 {
2027 int ntries;
2028
2029 for (ntries = 0; ntries < 100; ntries++) {
2030 if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK))
2031 break;
2032 DELAY(1);
2033 }
2034 if (ntries == 100) {
2035 device_printf(sc->sc_dev,
2036 "could not write to BBP through MCU\n");
2037 return;
2038 }
2039
2040 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL |
2041 RT2860_BBP_CSR_KICK | reg << 8 | val);
2042 RAL_BARRIER_WRITE(sc);
2043
2044 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0);
2045 DELAY(1000);
2046 }
2047
2048 uint8_t
rt2860_mcu_bbp_read(struct rt2860_softc * sc,uint8_t reg)2049 rt2860_mcu_bbp_read(struct rt2860_softc *sc, uint8_t reg)
2050 {
2051 uint32_t val;
2052 int ntries;
2053
2054 for (ntries = 0; ntries < 100; ntries++) {
2055 if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK))
2056 break;
2057 DELAY(1);
2058 }
2059 if (ntries == 100) {
2060 device_printf(sc->sc_dev,
2061 "could not read from BBP through MCU\n");
2062 return 0;
2063 }
2064
2065 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL |
2066 RT2860_BBP_CSR_KICK | RT2860_BBP_CSR_READ | reg << 8);
2067 RAL_BARRIER_WRITE(sc);
2068
2069 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0);
2070 DELAY(1000);
2071
2072 for (ntries = 0; ntries < 100; ntries++) {
2073 val = RAL_READ(sc, RT2860_H2M_BBPAGENT);
2074 if (!(val & RT2860_BBP_CSR_KICK))
2075 return val & 0xff;
2076 DELAY(1);
2077 }
2078 device_printf(sc->sc_dev, "could not read from BBP through MCU\n");
2079
2080 return 0;
2081 }
2082
2083 /*
2084 * Write to one of the 4 programmable 24-bit RF registers.
2085 */
2086 static void
rt2860_rf_write(struct rt2860_softc * sc,uint8_t reg,uint32_t val)2087 rt2860_rf_write(struct rt2860_softc *sc, uint8_t reg, uint32_t val)
2088 {
2089 uint32_t tmp;
2090 int ntries;
2091
2092 for (ntries = 0; ntries < 100; ntries++) {
2093 if (!(RAL_READ(sc, RT2860_RF_CSR_CFG0) & RT2860_RF_REG_CTRL))
2094 break;
2095 DELAY(1);
2096 }
2097 if (ntries == 100) {
2098 device_printf(sc->sc_dev, "could not write to RF\n");
2099 return;
2100 }
2101
2102 /* RF registers are 24-bit on the RT2860 */
2103 tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT |
2104 (val & 0x3fffff) << 2 | (reg & 3);
2105 RAL_WRITE(sc, RT2860_RF_CSR_CFG0, tmp);
2106 }
2107
2108 static uint8_t
rt3090_rf_read(struct rt2860_softc * sc,uint8_t reg)2109 rt3090_rf_read(struct rt2860_softc *sc, uint8_t reg)
2110 {
2111 uint32_t tmp;
2112 int ntries;
2113
2114 for (ntries = 0; ntries < 100; ntries++) {
2115 if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK))
2116 break;
2117 DELAY(1);
2118 }
2119 if (ntries == 100) {
2120 device_printf(sc->sc_dev, "could not read RF register\n");
2121 return 0xff;
2122 }
2123 tmp = RT3070_RF_KICK | reg << 8;
2124 RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp);
2125
2126 for (ntries = 0; ntries < 100; ntries++) {
2127 tmp = RAL_READ(sc, RT3070_RF_CSR_CFG);
2128 if (!(tmp & RT3070_RF_KICK))
2129 break;
2130 DELAY(1);
2131 }
2132 if (ntries == 100) {
2133 device_printf(sc->sc_dev, "could not read RF register\n");
2134 return 0xff;
2135 }
2136 return tmp & 0xff;
2137 }
2138
2139 void
rt3090_rf_write(struct rt2860_softc * sc,uint8_t reg,uint8_t val)2140 rt3090_rf_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val)
2141 {
2142 uint32_t tmp;
2143 int ntries;
2144
2145 for (ntries = 0; ntries < 10; ntries++) {
2146 if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK))
2147 break;
2148 DELAY(10);
2149 }
2150 if (ntries == 10) {
2151 device_printf(sc->sc_dev, "could not write to RF\n");
2152 return;
2153 }
2154
2155 tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val;
2156 RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp);
2157 }
2158
2159 /*
2160 * Send a command to the 8051 microcontroller unit.
2161 */
2162 int
rt2860_mcu_cmd(struct rt2860_softc * sc,uint8_t cmd,uint16_t arg,int wait)2163 rt2860_mcu_cmd(struct rt2860_softc *sc, uint8_t cmd, uint16_t arg, int wait)
2164 {
2165 int slot, ntries;
2166 uint32_t tmp;
2167 uint8_t cid;
2168
2169 for (ntries = 0; ntries < 100; ntries++) {
2170 if (!(RAL_READ(sc, RT2860_H2M_MAILBOX) & RT2860_H2M_BUSY))
2171 break;
2172 DELAY(2);
2173 }
2174 if (ntries == 100)
2175 return EIO;
2176
2177 cid = wait ? cmd : RT2860_TOKEN_NO_INTR;
2178 RAL_WRITE(sc, RT2860_H2M_MAILBOX, RT2860_H2M_BUSY | cid << 16 | arg);
2179 RAL_BARRIER_WRITE(sc);
2180 RAL_WRITE(sc, RT2860_HOST_CMD, cmd);
2181
2182 if (!wait)
2183 return 0;
2184 /* wait for the command to complete */
2185 for (ntries = 0; ntries < 200; ntries++) {
2186 tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_CID);
2187 /* find the command slot */
2188 for (slot = 0; slot < 4; slot++, tmp >>= 8)
2189 if ((tmp & 0xff) == cid)
2190 break;
2191 if (slot < 4)
2192 break;
2193 DELAY(100);
2194 }
2195 if (ntries == 200) {
2196 /* clear command and status */
2197 RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff);
2198 RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff);
2199 return ETIMEDOUT;
2200 }
2201 /* get command status (1 means success) */
2202 tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_STATUS);
2203 tmp = (tmp >> (slot * 8)) & 0xff;
2204 DPRINTF(("MCU command=0x%02x slot=%d status=0x%02x\n",
2205 cmd, slot, tmp));
2206 /* clear command and status */
2207 RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff);
2208 RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff);
2209 return (tmp == 1) ? 0 : EIO;
2210 }
2211
2212 static void
rt2860_enable_mrr(struct rt2860_softc * sc)2213 rt2860_enable_mrr(struct rt2860_softc *sc)
2214 {
2215 #define CCK(mcs) (mcs)
2216 #define OFDM(mcs) (1U << 3 | (mcs))
2217 RAL_WRITE(sc, RT2860_LG_FBK_CFG0,
2218 OFDM(6) << 28 | /* 54->48 */
2219 OFDM(5) << 24 | /* 48->36 */
2220 OFDM(4) << 20 | /* 36->24 */
2221 OFDM(3) << 16 | /* 24->18 */
2222 OFDM(2) << 12 | /* 18->12 */
2223 OFDM(1) << 8 | /* 12-> 9 */
2224 OFDM(0) << 4 | /* 9-> 6 */
2225 OFDM(0)); /* 6-> 6 */
2226
2227 RAL_WRITE(sc, RT2860_LG_FBK_CFG1,
2228 CCK(2) << 12 | /* 11->5.5 */
2229 CCK(1) << 8 | /* 5.5-> 2 */
2230 CCK(0) << 4 | /* 2-> 1 */
2231 CCK(0)); /* 1-> 1 */
2232 #undef OFDM
2233 #undef CCK
2234 }
2235
2236 static void
rt2860_set_txpreamble(struct rt2860_softc * sc)2237 rt2860_set_txpreamble(struct rt2860_softc *sc)
2238 {
2239 struct ieee80211com *ic = &sc->sc_ic;
2240 uint32_t tmp;
2241
2242 tmp = RAL_READ(sc, RT2860_AUTO_RSP_CFG);
2243 tmp &= ~RT2860_CCK_SHORT_EN;
2244 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
2245 tmp |= RT2860_CCK_SHORT_EN;
2246 RAL_WRITE(sc, RT2860_AUTO_RSP_CFG, tmp);
2247 }
2248
2249 void
rt2860_set_basicrates(struct rt2860_softc * sc,const struct ieee80211_rateset * rs)2250 rt2860_set_basicrates(struct rt2860_softc *sc,
2251 const struct ieee80211_rateset *rs)
2252 {
2253 struct ieee80211com *ic = &sc->sc_ic;
2254 uint32_t mask = 0;
2255 uint8_t rate;
2256 int i;
2257
2258 for (i = 0; i < rs->rs_nrates; i++) {
2259 rate = rs->rs_rates[i];
2260
2261 if (!(rate & IEEE80211_RATE_BASIC))
2262 continue;
2263
2264 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt,
2265 IEEE80211_RV(rate));
2266 }
2267
2268 RAL_WRITE(sc, RT2860_LEGACY_BASIC_RATE, mask);
2269 }
2270
2271 static void
rt2860_scan_start(struct ieee80211com * ic)2272 rt2860_scan_start(struct ieee80211com *ic)
2273 {
2274 struct rt2860_softc *sc = ic->ic_softc;
2275 uint32_t tmp;
2276
2277 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG);
2278 RAL_WRITE(sc, RT2860_BCN_TIME_CFG,
2279 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
2280 RT2860_TBTT_TIMER_EN));
2281 rt2860_set_gp_timer(sc, 0);
2282 }
2283
2284 static void
rt2860_scan_end(struct ieee80211com * ic)2285 rt2860_scan_end(struct ieee80211com *ic)
2286 {
2287 struct rt2860_softc *sc = ic->ic_softc;
2288 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
2289
2290 if (vap->iv_state == IEEE80211_S_RUN) {
2291 rt2860_enable_tsf_sync(sc);
2292 rt2860_set_gp_timer(sc, 500);
2293 }
2294 }
2295
2296 static void
rt2860_getradiocaps(struct ieee80211com * ic,int maxchans,int * nchans,struct ieee80211_channel chans[])2297 rt2860_getradiocaps(struct ieee80211com *ic, int maxchans, int *nchans,
2298 struct ieee80211_channel chans[])
2299 {
2300 struct rt2860_softc *sc = ic->ic_softc;
2301 uint8_t bands[IEEE80211_MODE_BYTES];
2302
2303 memset(bands, 0, sizeof(bands));
2304 setbit(bands, IEEE80211_MODE_11B);
2305 setbit(bands, IEEE80211_MODE_11G);
2306 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0);
2307
2308 if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850) {
2309 setbit(bands, IEEE80211_MODE_11A);
2310 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans,
2311 rt2860_chan_5ghz, nitems(rt2860_chan_5ghz), bands, 0);
2312 }
2313 }
2314
2315 static void
rt2860_set_channel(struct ieee80211com * ic)2316 rt2860_set_channel(struct ieee80211com *ic)
2317 {
2318 struct rt2860_softc *sc = ic->ic_softc;
2319
2320 RAL_LOCK(sc);
2321 rt2860_switch_chan(sc, ic->ic_curchan);
2322 RAL_UNLOCK(sc);
2323 }
2324
2325 static void
rt2860_select_chan_group(struct rt2860_softc * sc,int group)2326 rt2860_select_chan_group(struct rt2860_softc *sc, int group)
2327 {
2328 uint32_t tmp;
2329 uint8_t agc;
2330
2331 rt2860_mcu_bbp_write(sc, 62, 0x37 - sc->lna[group]);
2332 rt2860_mcu_bbp_write(sc, 63, 0x37 - sc->lna[group]);
2333 rt2860_mcu_bbp_write(sc, 64, 0x37 - sc->lna[group]);
2334 rt2860_mcu_bbp_write(sc, 86, 0x00);
2335
2336 if (group == 0) {
2337 if (sc->ext_2ghz_lna) {
2338 rt2860_mcu_bbp_write(sc, 82, 0x62);
2339 rt2860_mcu_bbp_write(sc, 75, 0x46);
2340 } else {
2341 rt2860_mcu_bbp_write(sc, 82, 0x84);
2342 rt2860_mcu_bbp_write(sc, 75, 0x50);
2343 }
2344 } else {
2345 if (sc->ext_5ghz_lna) {
2346 rt2860_mcu_bbp_write(sc, 82, 0xf2);
2347 rt2860_mcu_bbp_write(sc, 75, 0x46);
2348 } else {
2349 rt2860_mcu_bbp_write(sc, 82, 0xf2);
2350 rt2860_mcu_bbp_write(sc, 75, 0x50);
2351 }
2352 }
2353
2354 tmp = RAL_READ(sc, RT2860_TX_BAND_CFG);
2355 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P);
2356 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P;
2357 RAL_WRITE(sc, RT2860_TX_BAND_CFG, tmp);
2358
2359 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */
2360 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN;
2361 if (sc->nrxchains > 1)
2362 tmp |= RT2860_LNA_PE1_EN;
2363 if (sc->mac_ver == 0x3593 && sc->nrxchains > 2)
2364 tmp |= RT3593_LNA_PE2_EN;
2365 if (group == 0) { /* 2GHz */
2366 tmp |= RT2860_PA_PE_G0_EN;
2367 if (sc->ntxchains > 1)
2368 tmp |= RT2860_PA_PE_G1_EN;
2369 if (sc->mac_ver == 0x3593 && sc->ntxchains > 2)
2370 tmp |= RT3593_PA_PE_G2_EN;
2371 } else { /* 5GHz */
2372 tmp |= RT2860_PA_PE_A0_EN;
2373 if (sc->ntxchains > 1)
2374 tmp |= RT2860_PA_PE_A1_EN;
2375 if (sc->mac_ver == 0x3593 && sc->ntxchains > 2)
2376 tmp |= RT3593_PA_PE_A2_EN;
2377 }
2378 RAL_WRITE(sc, RT2860_TX_PIN_CFG, tmp);
2379
2380 if (sc->mac_ver == 0x3593) {
2381 tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
2382 if (sc->sc_flags & RT2860_PCIE) {
2383 tmp &= ~0x01010000;
2384 if (group == 0)
2385 tmp |= 0x00010000;
2386 } else {
2387 tmp &= ~0x00008080;
2388 if (group == 0)
2389 tmp |= 0x00000080;
2390 }
2391 tmp = (tmp & ~0x00001000) | 0x00000010;
2392 RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp);
2393 }
2394
2395 /* set initial AGC value */
2396 if (group == 0) { /* 2GHz band */
2397 if (sc->mac_ver >= 0x3071)
2398 agc = 0x1c + sc->lna[0] * 2;
2399 else
2400 agc = 0x2e + sc->lna[0];
2401 } else { /* 5GHz band */
2402 agc = 0x32 + (sc->lna[group] * 5) / 3;
2403 }
2404 rt2860_mcu_bbp_write(sc, 66, agc);
2405
2406 DELAY(1000);
2407 }
2408
2409 static void
rt2860_set_chan(struct rt2860_softc * sc,u_int chan)2410 rt2860_set_chan(struct rt2860_softc *sc, u_int chan)
2411 {
2412 const struct rfprog *rfprog = rt2860_rf2850;
2413 uint32_t r2, r3, r4;
2414 int8_t txpow1, txpow2;
2415 u_int i;
2416
2417 /* find the settings for this channel (we know it exists) */
2418 for (i = 0; rfprog[i].chan != chan; i++);
2419
2420 r2 = rfprog[i].r2;
2421 if (sc->ntxchains == 1)
2422 r2 |= 1 << 12; /* 1T: disable Tx chain 2 */
2423 if (sc->nrxchains == 1)
2424 r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */
2425 else if (sc->nrxchains == 2)
2426 r2 |= 1 << 4; /* 2R: disable Rx chain 3 */
2427
2428 /* use Tx power values from EEPROM */
2429 txpow1 = sc->txpow1[i];
2430 txpow2 = sc->txpow2[i];
2431 if (chan > 14) {
2432 if (txpow1 >= 0)
2433 txpow1 = txpow1 << 1 | 1;
2434 else
2435 txpow1 = (7 + txpow1) << 1;
2436 if (txpow2 >= 0)
2437 txpow2 = txpow2 << 1 | 1;
2438 else
2439 txpow2 = (7 + txpow2) << 1;
2440 }
2441 r3 = rfprog[i].r3 | txpow1 << 7;
2442 r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4;
2443
2444 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
2445 rt2860_rf_write(sc, RT2860_RF2, r2);
2446 rt2860_rf_write(sc, RT2860_RF3, r3);
2447 rt2860_rf_write(sc, RT2860_RF4, r4);
2448
2449 DELAY(200);
2450
2451 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
2452 rt2860_rf_write(sc, RT2860_RF2, r2);
2453 rt2860_rf_write(sc, RT2860_RF3, r3 | 1);
2454 rt2860_rf_write(sc, RT2860_RF4, r4);
2455
2456 DELAY(200);
2457
2458 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
2459 rt2860_rf_write(sc, RT2860_RF2, r2);
2460 rt2860_rf_write(sc, RT2860_RF3, r3);
2461 rt2860_rf_write(sc, RT2860_RF4, r4);
2462 }
2463
2464 static void
rt3090_set_chan(struct rt2860_softc * sc,u_int chan)2465 rt3090_set_chan(struct rt2860_softc *sc, u_int chan)
2466 {
2467 int8_t txpow1, txpow2;
2468 uint8_t rf;
2469 int i;
2470
2471 /* RT3090 is 2GHz only */
2472 KASSERT(chan >= 1 && chan <= 14, ("chan %d not support", chan));
2473
2474 /* find the settings for this channel (we know it exists) */
2475 for (i = 0; rt2860_rf2850[i].chan != chan; i++);
2476
2477 /* use Tx power values from EEPROM */
2478 txpow1 = sc->txpow1[i];
2479 txpow2 = sc->txpow2[i];
2480
2481 rt3090_rf_write(sc, 2, rt3090_freqs[i].n);
2482 rf = rt3090_rf_read(sc, 3);
2483 rf = (rf & ~0x0f) | rt3090_freqs[i].k;
2484 rt3090_rf_write(sc, 3, rf);
2485 rf = rt3090_rf_read(sc, 6);
2486 rf = (rf & ~0x03) | rt3090_freqs[i].r;
2487 rt3090_rf_write(sc, 6, rf);
2488
2489 /* set Tx0 power */
2490 rf = rt3090_rf_read(sc, 12);
2491 rf = (rf & ~0x1f) | txpow1;
2492 rt3090_rf_write(sc, 12, rf);
2493
2494 /* set Tx1 power */
2495 rf = rt3090_rf_read(sc, 13);
2496 rf = (rf & ~0x1f) | txpow2;
2497 rt3090_rf_write(sc, 13, rf);
2498
2499 rf = rt3090_rf_read(sc, 1);
2500 rf &= ~0xfc;
2501 if (sc->ntxchains == 1)
2502 rf |= RT3070_TX1_PD | RT3070_TX2_PD;
2503 else if (sc->ntxchains == 2)
2504 rf |= RT3070_TX2_PD;
2505 if (sc->nrxchains == 1)
2506 rf |= RT3070_RX1_PD | RT3070_RX2_PD;
2507 else if (sc->nrxchains == 2)
2508 rf |= RT3070_RX2_PD;
2509 rt3090_rf_write(sc, 1, rf);
2510
2511 /* set RF offset */
2512 rf = rt3090_rf_read(sc, 23);
2513 rf = (rf & ~0x7f) | sc->freq;
2514 rt3090_rf_write(sc, 23, rf);
2515
2516 /* program RF filter */
2517 rf = rt3090_rf_read(sc, 24); /* Tx */
2518 rf = (rf & ~0x3f) | sc->rf24_20mhz;
2519 rt3090_rf_write(sc, 24, rf);
2520 rf = rt3090_rf_read(sc, 31); /* Rx */
2521 rf = (rf & ~0x3f) | sc->rf24_20mhz;
2522 rt3090_rf_write(sc, 31, rf);
2523
2524 /* enable RF tuning */
2525 rf = rt3090_rf_read(sc, 7);
2526 rt3090_rf_write(sc, 7, rf | RT3070_TUNE);
2527 }
2528
2529 static void
rt5390_set_chan(struct rt2860_softc * sc,u_int chan)2530 rt5390_set_chan(struct rt2860_softc *sc, u_int chan)
2531 {
2532 uint8_t h20mhz, rf, tmp;
2533 int8_t txpow1, txpow2;
2534 int i;
2535
2536 /* RT5390 is 2GHz only */
2537 KASSERT(chan >= 1 && chan <= 14, ("chan %d not support", chan));
2538
2539 /* find the settings for this channel (we know it exists) */
2540 for (i = 0; rt2860_rf2850[i].chan != chan; i++);
2541
2542 /* use Tx power values from EEPROM */
2543 txpow1 = sc->txpow1[i];
2544 txpow2 = sc->txpow2[i];
2545
2546 rt3090_rf_write(sc, 8, rt3090_freqs[i].n);
2547 rt3090_rf_write(sc, 9, rt3090_freqs[i].k & 0x0f);
2548 rf = rt3090_rf_read(sc, 11);
2549 rf = (rf & ~0x03) | (rt3090_freqs[i].r & 0x03);
2550 rt3090_rf_write(sc, 11, rf);
2551
2552 rf = rt3090_rf_read(sc, 49);
2553 rf = (rf & ~0x3f) | (txpow1 & 0x3f);
2554 /* the valid range of the RF R49 is 0x00~0x27 */
2555 if ((rf & 0x3f) > 0x27)
2556 rf = (rf & ~0x3f) | 0x27;
2557 rt3090_rf_write(sc, 49, rf);
2558 if (sc->mac_ver == 0x5392) {
2559 rf = rt3090_rf_read(sc, 50);
2560 rf = (rf & ~0x3f) | (txpow2 & 0x3f);
2561 /* the valid range of the RF R50 is 0x00~0x27 */
2562 if ((rf & 0x3f) > 0x27)
2563 rf = (rf & ~0x3f) | 0x27;
2564 rt3090_rf_write(sc, 50, rf);
2565 }
2566
2567 rf = rt3090_rf_read(sc, 1);
2568 rf |= RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD | RT3070_TX0_PD;
2569 if (sc->mac_ver == 0x5392)
2570 rf |= RT3070_RX1_PD | RT3070_TX1_PD;
2571 rt3090_rf_write(sc, 1, rf);
2572
2573 rf = rt3090_rf_read(sc, 2);
2574 rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
2575 DELAY(1000);
2576 rt3090_rf_write(sc, 2, rf & ~RT3593_RESCAL);
2577
2578 rf = rt3090_rf_read(sc, 17);
2579 tmp = rf;
2580 rf = (rf & ~0x7f) | (sc->freq & 0x7f);
2581 rf = MIN(rf, 0x5f);
2582 if (tmp != rf)
2583 rt2860_mcu_cmd(sc, 0x74, (tmp << 8 ) | rf, 0);
2584
2585 if (sc->mac_ver == 0x5390) {
2586 if (chan <= 4)
2587 rf = 0x73;
2588 else if (chan >= 5 && chan <= 6)
2589 rf = 0x63;
2590 else if (chan >= 7 && chan <= 10)
2591 rf = 0x53;
2592 else
2593 rf = 43;
2594 rt3090_rf_write(sc, 55, rf);
2595
2596 if (chan == 1)
2597 rf = 0x0c;
2598 else if (chan == 2)
2599 rf = 0x0b;
2600 else if (chan == 3)
2601 rf = 0x0a;
2602 else if (chan >= 4 && chan <= 6)
2603 rf = 0x09;
2604 else if (chan >= 7 && chan <= 12)
2605 rf = 0x08;
2606 else if (chan == 13)
2607 rf = 0x07;
2608 else
2609 rf = 0x06;
2610 rt3090_rf_write(sc, 59, rf);
2611 }
2612
2613 /* Tx/Rx h20M */
2614 h20mhz = (sc->rf24_20mhz & 0x20) >> 5;
2615 rf = rt3090_rf_read(sc, 30);
2616 rf = (rf & ~0x06) | (h20mhz << 1) | (h20mhz << 2);
2617 rt3090_rf_write(sc, 30, rf);
2618
2619 /* Rx BB filter VCM */
2620 rf = rt3090_rf_read(sc, 30);
2621 rf = (rf & ~0x18) | 0x10;
2622 rt3090_rf_write(sc, 30, rf);
2623
2624 /* Initiate VCO calibration. */
2625 rf = rt3090_rf_read(sc, 3);
2626 rf |= RT3593_VCOCAL;
2627 rt3090_rf_write(sc, 3, rf);
2628 }
2629
2630 static int
rt3090_rf_init(struct rt2860_softc * sc)2631 rt3090_rf_init(struct rt2860_softc *sc)
2632 {
2633 uint32_t tmp;
2634 uint8_t rf, bbp;
2635 int i;
2636
2637 rf = rt3090_rf_read(sc, 30);
2638 /* toggle RF R30 bit 7 */
2639 rt3090_rf_write(sc, 30, rf | 0x80);
2640 DELAY(1000);
2641 rt3090_rf_write(sc, 30, rf & ~0x80);
2642
2643 tmp = RAL_READ(sc, RT3070_LDO_CFG0);
2644 tmp &= ~0x1f000000;
2645 if (sc->patch_dac && sc->mac_rev < 0x0211)
2646 tmp |= 0x0d000000; /* 1.35V */
2647 else
2648 tmp |= 0x01000000; /* 1.2V */
2649 RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
2650
2651 /* patch LNA_PE_G1 */
2652 tmp = RAL_READ(sc, RT3070_GPIO_SWITCH);
2653 RAL_WRITE(sc, RT3070_GPIO_SWITCH, tmp & ~0x20);
2654
2655 /* initialize RF registers to default value */
2656 for (i = 0; i < nitems(rt3090_def_rf); i++) {
2657 rt3090_rf_write(sc, rt3090_def_rf[i].reg,
2658 rt3090_def_rf[i].val);
2659 }
2660
2661 /* select 20MHz bandwidth */
2662 rt3090_rf_write(sc, 31, 0x14);
2663
2664 rf = rt3090_rf_read(sc, 6);
2665 rt3090_rf_write(sc, 6, rf | 0x40);
2666
2667 if (sc->mac_ver != 0x3593) {
2668 /* calibrate filter for 20MHz bandwidth */
2669 sc->rf24_20mhz = 0x1f; /* default value */
2670 rt3090_filter_calib(sc, 0x07, 0x16, &sc->rf24_20mhz);
2671
2672 /* select 40MHz bandwidth */
2673 bbp = rt2860_mcu_bbp_read(sc, 4);
2674 rt2860_mcu_bbp_write(sc, 4, (bbp & ~0x08) | 0x10);
2675 rf = rt3090_rf_read(sc, 31);
2676 rt3090_rf_write(sc, 31, rf | 0x20);
2677
2678 /* calibrate filter for 40MHz bandwidth */
2679 sc->rf24_40mhz = 0x2f; /* default value */
2680 rt3090_filter_calib(sc, 0x27, 0x19, &sc->rf24_40mhz);
2681
2682 /* go back to 20MHz bandwidth */
2683 bbp = rt2860_mcu_bbp_read(sc, 4);
2684 rt2860_mcu_bbp_write(sc, 4, bbp & ~0x18);
2685 }
2686 if (sc->mac_rev < 0x0211)
2687 rt3090_rf_write(sc, 27, 0x03);
2688
2689 tmp = RAL_READ(sc, RT3070_OPT_14);
2690 RAL_WRITE(sc, RT3070_OPT_14, tmp | 1);
2691
2692 if (sc->rf_rev == RT3070_RF_3020)
2693 rt3090_set_rx_antenna(sc, 0);
2694
2695 bbp = rt2860_mcu_bbp_read(sc, 138);
2696 if (sc->mac_ver == 0x3593) {
2697 if (sc->ntxchains == 1)
2698 bbp |= 0x60; /* turn off DAC1 and DAC2 */
2699 else if (sc->ntxchains == 2)
2700 bbp |= 0x40; /* turn off DAC2 */
2701 if (sc->nrxchains == 1)
2702 bbp &= ~0x06; /* turn off ADC1 and ADC2 */
2703 else if (sc->nrxchains == 2)
2704 bbp &= ~0x04; /* turn off ADC2 */
2705 } else {
2706 if (sc->ntxchains == 1)
2707 bbp |= 0x20; /* turn off DAC1 */
2708 if (sc->nrxchains == 1)
2709 bbp &= ~0x02; /* turn off ADC1 */
2710 }
2711 rt2860_mcu_bbp_write(sc, 138, bbp);
2712
2713 rf = rt3090_rf_read(sc, 1);
2714 rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD);
2715 rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD;
2716 rt3090_rf_write(sc, 1, rf);
2717
2718 rf = rt3090_rf_read(sc, 15);
2719 rt3090_rf_write(sc, 15, rf & ~RT3070_TX_LO2);
2720
2721 rf = rt3090_rf_read(sc, 17);
2722 rf &= ~RT3070_TX_LO1;
2723 if (sc->mac_rev >= 0x0211 && !sc->ext_2ghz_lna)
2724 rf |= 0x20; /* fix for long range Rx issue */
2725 if (sc->txmixgain_2ghz >= 2)
2726 rf = (rf & ~0x7) | sc->txmixgain_2ghz;
2727 rt3090_rf_write(sc, 17, rf);
2728
2729 rf = rt3090_rf_read(sc, 20);
2730 rt3090_rf_write(sc, 20, rf & ~RT3070_RX_LO1);
2731
2732 rf = rt3090_rf_read(sc, 21);
2733 rt3090_rf_write(sc, 21, rf & ~RT3070_RX_LO2);
2734
2735 return (0);
2736 }
2737
2738 static void
rt5390_rf_init(struct rt2860_softc * sc)2739 rt5390_rf_init(struct rt2860_softc *sc)
2740 {
2741 uint8_t rf, bbp;
2742 int i;
2743
2744 rf = rt3090_rf_read(sc, 2);
2745 /* Toggle RF R2 bit 7. */
2746 rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
2747 DELAY(1000);
2748 rt3090_rf_write(sc, 2, rf & ~RT3593_RESCAL);
2749
2750 /* Initialize RF registers to default value. */
2751 if (sc->mac_ver == 0x5392) {
2752 for (i = 0; i < nitems(rt5392_def_rf); i++) {
2753 rt3090_rf_write(sc, rt5392_def_rf[i].reg,
2754 rt5392_def_rf[i].val);
2755 }
2756 } else {
2757 for (i = 0; i < nitems(rt5390_def_rf); i++) {
2758 rt3090_rf_write(sc, rt5390_def_rf[i].reg,
2759 rt5390_def_rf[i].val);
2760 }
2761 }
2762
2763 sc->rf24_20mhz = 0x1f;
2764 sc->rf24_40mhz = 0x2f;
2765
2766 if (sc->mac_rev < 0x0211)
2767 rt3090_rf_write(sc, 27, 0x03);
2768
2769 /* Set led open drain enable. */
2770 RAL_WRITE(sc, RT3070_OPT_14, RAL_READ(sc, RT3070_OPT_14) | 1);
2771
2772 RAL_WRITE(sc, RT2860_TX_SW_CFG1, 0);
2773 RAL_WRITE(sc, RT2860_TX_SW_CFG2, 0);
2774
2775 if (sc->mac_ver == 0x5390)
2776 rt3090_set_rx_antenna(sc, 0);
2777
2778 /* Patch RSSI inaccurate issue. */
2779 rt2860_mcu_bbp_write(sc, 79, 0x13);
2780 rt2860_mcu_bbp_write(sc, 80, 0x05);
2781 rt2860_mcu_bbp_write(sc, 81, 0x33);
2782
2783 /* Enable DC filter. */
2784 if (sc->mac_rev >= 0x0211)
2785 rt2860_mcu_bbp_write(sc, 103, 0xc0);
2786
2787 bbp = rt2860_mcu_bbp_read(sc, 138);
2788 if (sc->ntxchains == 1)
2789 bbp |= 0x20; /* Turn off DAC1. */
2790 if (sc->nrxchains == 1)
2791 bbp &= ~0x02; /* Turn off ADC1. */
2792 rt2860_mcu_bbp_write(sc, 138, bbp);
2793
2794 /* Enable RX LO1 and LO2. */
2795 rt3090_rf_write(sc, 38, rt3090_rf_read(sc, 38) & ~RT5390_RX_LO1);
2796 rt3090_rf_write(sc, 39, rt3090_rf_read(sc, 39) & ~RT5390_RX_LO2);
2797
2798 /* Avoid data lost and CRC error. */
2799 rt2860_mcu_bbp_write(sc, 4,
2800 rt2860_mcu_bbp_read(sc, 4) | RT5390_MAC_IF_CTRL);
2801
2802 rf = rt3090_rf_read(sc, 30);
2803 rf = (rf & ~0x18) | 0x10;
2804 rt3090_rf_write(sc, 30, rf);
2805 }
2806
2807 static void
rt3090_rf_wakeup(struct rt2860_softc * sc)2808 rt3090_rf_wakeup(struct rt2860_softc *sc)
2809 {
2810 uint32_t tmp;
2811 uint8_t rf;
2812
2813 if (sc->mac_ver == 0x3593) {
2814 /* enable VCO */
2815 rf = rt3090_rf_read(sc, 1);
2816 rt3090_rf_write(sc, 1, rf | RT3593_VCO);
2817
2818 /* initiate VCO calibration */
2819 rf = rt3090_rf_read(sc, 3);
2820 rt3090_rf_write(sc, 3, rf | RT3593_VCOCAL);
2821
2822 /* enable VCO bias current control */
2823 rf = rt3090_rf_read(sc, 6);
2824 rt3090_rf_write(sc, 6, rf | RT3593_VCO_IC);
2825
2826 /* initiate res calibration */
2827 rf = rt3090_rf_read(sc, 2);
2828 rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
2829
2830 /* set reference current control to 0.33 mA */
2831 rf = rt3090_rf_read(sc, 22);
2832 rf &= ~RT3593_CP_IC_MASK;
2833 rf |= 1 << RT3593_CP_IC_SHIFT;
2834 rt3090_rf_write(sc, 22, rf);
2835
2836 /* enable RX CTB */
2837 rf = rt3090_rf_read(sc, 46);
2838 rt3090_rf_write(sc, 46, rf | RT3593_RX_CTB);
2839
2840 rf = rt3090_rf_read(sc, 20);
2841 rf &= ~(RT3593_LDO_RF_VC_MASK | RT3593_LDO_PLL_VC_MASK);
2842 rt3090_rf_write(sc, 20, rf);
2843 } else {
2844 /* enable RF block */
2845 rf = rt3090_rf_read(sc, 1);
2846 rt3090_rf_write(sc, 1, rf | RT3070_RF_BLOCK);
2847
2848 /* enable VCO bias current control */
2849 rf = rt3090_rf_read(sc, 7);
2850 rt3090_rf_write(sc, 7, rf | 0x30);
2851
2852 rf = rt3090_rf_read(sc, 9);
2853 rt3090_rf_write(sc, 9, rf | 0x0e);
2854
2855 /* enable RX CTB */
2856 rf = rt3090_rf_read(sc, 21);
2857 rt3090_rf_write(sc, 21, rf | RT3070_RX_CTB);
2858
2859 /* fix Tx to Rx IQ glitch by raising RF voltage */
2860 rf = rt3090_rf_read(sc, 27);
2861 rf &= ~0x77;
2862 if (sc->mac_rev < 0x0211)
2863 rf |= 0x03;
2864 rt3090_rf_write(sc, 27, rf);
2865 }
2866 if (sc->patch_dac && sc->mac_rev < 0x0211) {
2867 tmp = RAL_READ(sc, RT3070_LDO_CFG0);
2868 tmp = (tmp & ~0x1f000000) | 0x0d000000;
2869 RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
2870 }
2871 }
2872
2873 static void
rt5390_rf_wakeup(struct rt2860_softc * sc)2874 rt5390_rf_wakeup(struct rt2860_softc *sc)
2875 {
2876 uint32_t tmp;
2877 uint8_t rf;
2878
2879 rf = rt3090_rf_read(sc, 1);
2880 rf |= RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD |
2881 RT3070_TX0_PD;
2882 if (sc->mac_ver == 0x5392)
2883 rf |= RT3070_RX1_PD | RT3070_TX1_PD;
2884 rt3090_rf_write(sc, 1, rf);
2885
2886 rf = rt3090_rf_read(sc, 6);
2887 rf |= RT3593_VCO_IC | RT3593_VCOCAL;
2888 if (sc->mac_ver == 0x5390)
2889 rf &= ~RT3593_VCO_IC;
2890 rt3090_rf_write(sc, 6, rf);
2891
2892 rt3090_rf_write(sc, 2, rt3090_rf_read(sc, 2) | RT3593_RESCAL);
2893
2894 rf = rt3090_rf_read(sc, 22);
2895 rf = (rf & ~0xe0) | 0x20;
2896 rt3090_rf_write(sc, 22, rf);
2897
2898 rt3090_rf_write(sc, 42, rt3090_rf_read(sc, 42) | RT5390_RX_CTB);
2899 rt3090_rf_write(sc, 20, rt3090_rf_read(sc, 20) & ~0x77);
2900 rt3090_rf_write(sc, 3, rt3090_rf_read(sc, 3) | RT3593_VCOCAL);
2901
2902 if (sc->patch_dac && sc->mac_rev < 0x0211) {
2903 tmp = RAL_READ(sc, RT3070_LDO_CFG0);
2904 tmp = (tmp & ~0x1f000000) | 0x0d000000;
2905 RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
2906 }
2907 }
2908
2909 static int
rt3090_filter_calib(struct rt2860_softc * sc,uint8_t init,uint8_t target,uint8_t * val)2910 rt3090_filter_calib(struct rt2860_softc *sc, uint8_t init, uint8_t target,
2911 uint8_t *val)
2912 {
2913 uint8_t rf22, rf24;
2914 uint8_t bbp55_pb, bbp55_sb, delta;
2915 int ntries;
2916
2917 /* program filter */
2918 rf24 = rt3090_rf_read(sc, 24);
2919 rf24 = (rf24 & 0xc0) | init; /* initial filter value */
2920 rt3090_rf_write(sc, 24, rf24);
2921
2922 /* enable baseband loopback mode */
2923 rf22 = rt3090_rf_read(sc, 22);
2924 rt3090_rf_write(sc, 22, rf22 | RT3070_BB_LOOPBACK);
2925
2926 /* set power and frequency of passband test tone */
2927 rt2860_mcu_bbp_write(sc, 24, 0x00);
2928 for (ntries = 0; ntries < 100; ntries++) {
2929 /* transmit test tone */
2930 rt2860_mcu_bbp_write(sc, 25, 0x90);
2931 DELAY(1000);
2932 /* read received power */
2933 bbp55_pb = rt2860_mcu_bbp_read(sc, 55);
2934 if (bbp55_pb != 0)
2935 break;
2936 }
2937 if (ntries == 100)
2938 return (ETIMEDOUT);
2939
2940 /* set power and frequency of stopband test tone */
2941 rt2860_mcu_bbp_write(sc, 24, 0x06);
2942 for (ntries = 0; ntries < 100; ntries++) {
2943 /* transmit test tone */
2944 rt2860_mcu_bbp_write(sc, 25, 0x90);
2945 DELAY(1000);
2946 /* read received power */
2947 bbp55_sb = rt2860_mcu_bbp_read(sc, 55);
2948
2949 delta = bbp55_pb - bbp55_sb;
2950 if (delta > target)
2951 break;
2952
2953 /* reprogram filter */
2954 rf24++;
2955 rt3090_rf_write(sc, 24, rf24);
2956 }
2957 if (ntries < 100) {
2958 if (rf24 != init)
2959 rf24--; /* backtrack */
2960 *val = rf24;
2961 rt3090_rf_write(sc, 24, rf24);
2962 }
2963
2964 /* restore initial state */
2965 rt2860_mcu_bbp_write(sc, 24, 0x00);
2966
2967 /* disable baseband loopback mode */
2968 rf22 = rt3090_rf_read(sc, 22);
2969 rt3090_rf_write(sc, 22, rf22 & ~RT3070_BB_LOOPBACK);
2970
2971 return (0);
2972 }
2973
2974 static void
rt3090_rf_setup(struct rt2860_softc * sc)2975 rt3090_rf_setup(struct rt2860_softc *sc)
2976 {
2977 uint8_t bbp;
2978 int i;
2979
2980 if (sc->mac_rev >= 0x0211) {
2981 /* enable DC filter */
2982 rt2860_mcu_bbp_write(sc, 103, 0xc0);
2983
2984 /* improve power consumption */
2985 bbp = rt2860_mcu_bbp_read(sc, 31);
2986 rt2860_mcu_bbp_write(sc, 31, bbp & ~0x03);
2987 }
2988
2989 RAL_WRITE(sc, RT2860_TX_SW_CFG1, 0);
2990 if (sc->mac_rev < 0x0211) {
2991 RAL_WRITE(sc, RT2860_TX_SW_CFG2,
2992 sc->patch_dac ? 0x2c : 0x0f);
2993 } else
2994 RAL_WRITE(sc, RT2860_TX_SW_CFG2, 0);
2995
2996 /* initialize RF registers from ROM */
2997 if (sc->mac_ver < 0x5390) {
2998 for (i = 0; i < 10; i++) {
2999 if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff)
3000 continue;
3001 rt3090_rf_write(sc, sc->rf[i].reg, sc->rf[i].val);
3002 }
3003 }
3004 }
3005
3006 static void
rt2860_set_leds(struct rt2860_softc * sc,uint16_t which)3007 rt2860_set_leds(struct rt2860_softc *sc, uint16_t which)
3008 {
3009 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LEDS,
3010 which | (sc->leds & 0x7f), 0);
3011 }
3012
3013 /*
3014 * Hardware has a general-purpose programmable timer interrupt that can
3015 * periodically raise MAC_INT_4.
3016 */
3017 static void
rt2860_set_gp_timer(struct rt2860_softc * sc,int ms)3018 rt2860_set_gp_timer(struct rt2860_softc *sc, int ms)
3019 {
3020 uint32_t tmp;
3021
3022 /* disable GP timer before reprogramming it */
3023 tmp = RAL_READ(sc, RT2860_INT_TIMER_EN);
3024 RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp & ~RT2860_GP_TIMER_EN);
3025
3026 if (ms == 0)
3027 return;
3028
3029 tmp = RAL_READ(sc, RT2860_INT_TIMER_CFG);
3030 ms *= 16; /* Unit: 64us */
3031 tmp = (tmp & 0xffff) | ms << RT2860_GP_TIMER_SHIFT;
3032 RAL_WRITE(sc, RT2860_INT_TIMER_CFG, tmp);
3033
3034 /* enable GP timer */
3035 tmp = RAL_READ(sc, RT2860_INT_TIMER_EN);
3036 RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp | RT2860_GP_TIMER_EN);
3037 }
3038
3039 static void
rt2860_set_bssid(struct rt2860_softc * sc,const uint8_t * bssid)3040 rt2860_set_bssid(struct rt2860_softc *sc, const uint8_t *bssid)
3041 {
3042 RAL_WRITE(sc, RT2860_MAC_BSSID_DW0,
3043 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24);
3044 RAL_WRITE(sc, RT2860_MAC_BSSID_DW1,
3045 bssid[4] | bssid[5] << 8);
3046 }
3047
3048 static void
rt2860_set_macaddr(struct rt2860_softc * sc,const uint8_t * addr)3049 rt2860_set_macaddr(struct rt2860_softc *sc, const uint8_t *addr)
3050 {
3051 RAL_WRITE(sc, RT2860_MAC_ADDR_DW0,
3052 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24);
3053 RAL_WRITE(sc, RT2860_MAC_ADDR_DW1,
3054 addr[4] | addr[5] << 8 | 0xff << 16);
3055 }
3056
3057 static void
rt2860_updateslot(struct ieee80211com * ic)3058 rt2860_updateslot(struct ieee80211com *ic)
3059 {
3060 struct rt2860_softc *sc = ic->ic_softc;
3061 uint32_t tmp;
3062
3063 tmp = RAL_READ(sc, RT2860_BKOFF_SLOT_CFG);
3064 tmp &= ~0xff;
3065 tmp |= IEEE80211_GET_SLOTTIME(ic);
3066 RAL_WRITE(sc, RT2860_BKOFF_SLOT_CFG, tmp);
3067 }
3068
3069 static void
rt2860_updateprot(struct rt2860_softc * sc)3070 rt2860_updateprot(struct rt2860_softc *sc)
3071 {
3072 struct ieee80211com *ic = &sc->sc_ic;
3073 uint32_t tmp;
3074
3075 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL;
3076 /* setup protection frame rate (MCS code) */
3077 tmp |= IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ?
3078 rt2860_rates[RT2860_RIDX_OFDM6].mcs :
3079 rt2860_rates[RT2860_RIDX_CCK11].mcs;
3080
3081 /* CCK frames don't require protection */
3082 RAL_WRITE(sc, RT2860_CCK_PROT_CFG, tmp);
3083
3084 if (ic->ic_flags & IEEE80211_F_USEPROT) {
3085 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
3086 tmp |= RT2860_PROT_CTRL_RTS_CTS;
3087 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
3088 tmp |= RT2860_PROT_CTRL_CTS;
3089 }
3090 RAL_WRITE(sc, RT2860_OFDM_PROT_CFG, tmp);
3091 }
3092
3093 static void
rt2860_update_promisc(struct ieee80211com * ic)3094 rt2860_update_promisc(struct ieee80211com *ic)
3095 {
3096 struct rt2860_softc *sc = ic->ic_softc;
3097 uint32_t tmp;
3098
3099 tmp = RAL_READ(sc, RT2860_RX_FILTR_CFG);
3100 tmp &= ~RT2860_DROP_NOT_MYBSS;
3101 if (ic->ic_promisc == 0)
3102 tmp |= RT2860_DROP_NOT_MYBSS;
3103 RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp);
3104 }
3105
3106 static int
rt2860_updateedca(struct ieee80211com * ic)3107 rt2860_updateedca(struct ieee80211com *ic)
3108 {
3109 struct rt2860_softc *sc = ic->ic_softc;
3110 struct chanAccParams chp;
3111 const struct wmeParams *wmep;
3112 int aci;
3113
3114 ieee80211_wme_ic_getparams(ic, &chp);
3115
3116 wmep = chp.cap_wmeParams;
3117
3118 /* update MAC TX configuration registers */
3119 for (aci = 0; aci < WME_NUM_AC; aci++) {
3120 RAL_WRITE(sc, RT2860_EDCA_AC_CFG(aci),
3121 wmep[aci].wmep_logcwmax << 16 |
3122 wmep[aci].wmep_logcwmin << 12 |
3123 wmep[aci].wmep_aifsn << 8 |
3124 wmep[aci].wmep_txopLimit);
3125 }
3126
3127 /* update SCH/DMA registers too */
3128 RAL_WRITE(sc, RT2860_WMM_AIFSN_CFG,
3129 wmep[WME_AC_VO].wmep_aifsn << 12 |
3130 wmep[WME_AC_VI].wmep_aifsn << 8 |
3131 wmep[WME_AC_BK].wmep_aifsn << 4 |
3132 wmep[WME_AC_BE].wmep_aifsn);
3133 RAL_WRITE(sc, RT2860_WMM_CWMIN_CFG,
3134 wmep[WME_AC_VO].wmep_logcwmin << 12 |
3135 wmep[WME_AC_VI].wmep_logcwmin << 8 |
3136 wmep[WME_AC_BK].wmep_logcwmin << 4 |
3137 wmep[WME_AC_BE].wmep_logcwmin);
3138 RAL_WRITE(sc, RT2860_WMM_CWMAX_CFG,
3139 wmep[WME_AC_VO].wmep_logcwmax << 12 |
3140 wmep[WME_AC_VI].wmep_logcwmax << 8 |
3141 wmep[WME_AC_BK].wmep_logcwmax << 4 |
3142 wmep[WME_AC_BE].wmep_logcwmax);
3143 RAL_WRITE(sc, RT2860_WMM_TXOP0_CFG,
3144 wmep[WME_AC_BK].wmep_txopLimit << 16 |
3145 wmep[WME_AC_BE].wmep_txopLimit);
3146 RAL_WRITE(sc, RT2860_WMM_TXOP1_CFG,
3147 wmep[WME_AC_VO].wmep_txopLimit << 16 |
3148 wmep[WME_AC_VI].wmep_txopLimit);
3149
3150 return 0;
3151 }
3152
3153 #ifdef HW_CRYPTO
3154 static int
rt2860_set_key(struct ieee80211com * ic,struct ieee80211_node * ni,struct ieee80211_key * k)3155 rt2860_set_key(struct ieee80211com *ic, struct ieee80211_node *ni,
3156 struct ieee80211_key *k)
3157 {
3158 struct rt2860_softc *sc = ic->ic_softc;
3159 bus_size_t base;
3160 uint32_t attr;
3161 uint8_t mode, wcid, iv[8];
3162
3163 /* defer setting of WEP keys until interface is brought up */
3164 if ((ic->ic_if.if_flags & (IFF_UP | IFF_RUNNING)) !=
3165 (IFF_UP | IFF_RUNNING))
3166 return 0;
3167
3168 /* map net80211 cipher to RT2860 security mode */
3169 switch (k->k_cipher) {
3170 case IEEE80211_CIPHER_WEP40:
3171 mode = RT2860_MODE_WEP40;
3172 break;
3173 case IEEE80211_CIPHER_WEP104:
3174 mode = RT2860_MODE_WEP104;
3175 break;
3176 case IEEE80211_CIPHER_TKIP:
3177 mode = RT2860_MODE_TKIP;
3178 break;
3179 case IEEE80211_CIPHER_CCMP:
3180 mode = RT2860_MODE_AES_CCMP;
3181 break;
3182 default:
3183 return EINVAL;
3184 }
3185
3186 if (k->k_flags & IEEE80211_KEY_GROUP) {
3187 wcid = 0; /* NB: update WCID0 for group keys */
3188 base = RT2860_SKEY(0, k->k_id);
3189 } else {
3190 wcid = ((struct rt2860_node *)ni)->wcid;
3191 base = RT2860_PKEY(wcid);
3192 }
3193
3194 if (k->k_cipher == IEEE80211_CIPHER_TKIP) {
3195 RAL_WRITE_REGION_1(sc, base, k->k_key, 16);
3196 #ifndef IEEE80211_STA_ONLY
3197 if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
3198 RAL_WRITE_REGION_1(sc, base + 16, &k->k_key[16], 8);
3199 RAL_WRITE_REGION_1(sc, base + 24, &k->k_key[24], 8);
3200 } else
3201 #endif
3202 {
3203 RAL_WRITE_REGION_1(sc, base + 16, &k->k_key[24], 8);
3204 RAL_WRITE_REGION_1(sc, base + 24, &k->k_key[16], 8);
3205 }
3206 } else
3207 RAL_WRITE_REGION_1(sc, base, k->k_key, k->k_len);
3208
3209 if (!(k->k_flags & IEEE80211_KEY_GROUP) ||
3210 (k->k_flags & IEEE80211_KEY_TX)) {
3211 /* set initial packet number in IV+EIV */
3212 if (k->k_cipher == IEEE80211_CIPHER_WEP40 ||
3213 k->k_cipher == IEEE80211_CIPHER_WEP104) {
3214 uint32_t val = arc4random();
3215 /* skip weak IVs from Fluhrer/Mantin/Shamir */
3216 if (val >= 0x03ff00 && (val & 0xf8ff00) == 0x00ff00)
3217 val += 0x000100;
3218 iv[0] = val;
3219 iv[1] = val >> 8;
3220 iv[2] = val >> 16;
3221 iv[3] = k->k_id << 6;
3222 iv[4] = iv[5] = iv[6] = iv[7] = 0;
3223 } else {
3224 if (k->k_cipher == IEEE80211_CIPHER_TKIP) {
3225 iv[0] = k->k_tsc >> 8;
3226 iv[1] = (iv[0] | 0x20) & 0x7f;
3227 iv[2] = k->k_tsc;
3228 } else /* CCMP */ {
3229 iv[0] = k->k_tsc;
3230 iv[1] = k->k_tsc >> 8;
3231 iv[2] = 0;
3232 }
3233 iv[3] = k->k_id << 6 | IEEE80211_WEP_EXTIV;
3234 iv[4] = k->k_tsc >> 16;
3235 iv[5] = k->k_tsc >> 24;
3236 iv[6] = k->k_tsc >> 32;
3237 iv[7] = k->k_tsc >> 40;
3238 }
3239 RAL_WRITE_REGION_1(sc, RT2860_IVEIV(wcid), iv, 8);
3240 }
3241
3242 if (k->k_flags & IEEE80211_KEY_GROUP) {
3243 /* install group key */
3244 attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7);
3245 attr &= ~(0xf << (k->k_id * 4));
3246 attr |= mode << (k->k_id * 4);
3247 RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr);
3248 } else {
3249 /* install pairwise key */
3250 attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid));
3251 attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN;
3252 RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr);
3253 }
3254 return 0;
3255 }
3256
3257 static void
rt2860_delete_key(struct ieee80211com * ic,struct ieee80211_node * ni,struct ieee80211_key * k)3258 rt2860_delete_key(struct ieee80211com *ic, struct ieee80211_node *ni,
3259 struct ieee80211_key *k)
3260 {
3261 struct rt2860_softc *sc = ic->ic_softc;
3262 uint32_t attr;
3263 uint8_t wcid;
3264
3265 if (k->k_flags & IEEE80211_KEY_GROUP) {
3266 /* remove group key */
3267 attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7);
3268 attr &= ~(0xf << (k->k_id * 4));
3269 RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr);
3270
3271 } else {
3272 /* remove pairwise key */
3273 wcid = ((struct rt2860_node *)ni)->wcid;
3274 attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid));
3275 attr &= ~0xf;
3276 RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr);
3277 }
3278 }
3279 #endif
3280
3281 static int8_t
rt2860_rssi2dbm(struct rt2860_softc * sc,uint8_t rssi,uint8_t rxchain)3282 rt2860_rssi2dbm(struct rt2860_softc *sc, uint8_t rssi, uint8_t rxchain)
3283 {
3284 struct ieee80211com *ic = &sc->sc_ic;
3285 struct ieee80211_channel *c = ic->ic_curchan;
3286 int delta;
3287
3288 if (IEEE80211_IS_CHAN_5GHZ(c)) {
3289 u_int chan = ieee80211_chan2ieee(ic, c);
3290 delta = sc->rssi_5ghz[rxchain];
3291
3292 /* determine channel group */
3293 if (chan <= 64)
3294 delta -= sc->lna[1];
3295 else if (chan <= 128)
3296 delta -= sc->lna[2];
3297 else
3298 delta -= sc->lna[3];
3299 } else
3300 delta = sc->rssi_2ghz[rxchain] - sc->lna[0];
3301
3302 return -12 - delta - rssi;
3303 }
3304
3305 /*
3306 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word.
3307 * Used to adjust per-rate Tx power registers.
3308 */
3309 static __inline uint32_t
b4inc(uint32_t b32,int8_t delta)3310 b4inc(uint32_t b32, int8_t delta)
3311 {
3312 int8_t i, b4;
3313
3314 for (i = 0; i < 8; i++) {
3315 b4 = b32 & 0xf;
3316 b4 += delta;
3317 if (b4 < 0)
3318 b4 = 0;
3319 else if (b4 > 0xf)
3320 b4 = 0xf;
3321 b32 = b32 >> 4 | (uint32_t)b4 << 28;
3322 }
3323 return b32;
3324 }
3325
3326 static const char *
rt2860_get_rf(uint16_t rev)3327 rt2860_get_rf(uint16_t rev)
3328 {
3329 switch (rev) {
3330 case RT2860_RF_2820: return "RT2820";
3331 case RT2860_RF_2850: return "RT2850";
3332 case RT2860_RF_2720: return "RT2720";
3333 case RT2860_RF_2750: return "RT2750";
3334 case RT3070_RF_3020: return "RT3020";
3335 case RT3070_RF_2020: return "RT2020";
3336 case RT3070_RF_3021: return "RT3021";
3337 case RT3070_RF_3022: return "RT3022";
3338 case RT3070_RF_3052: return "RT3052";
3339 case RT3070_RF_3320: return "RT3320";
3340 case RT3070_RF_3053: return "RT3053";
3341 case RT5390_RF_5360: return "RT5360";
3342 case RT5390_RF_5390: return "RT5390";
3343 default: return "unknown";
3344 }
3345 }
3346
3347 static int
rt2860_read_eeprom(struct rt2860_softc * sc,uint8_t macaddr[IEEE80211_ADDR_LEN])3348 rt2860_read_eeprom(struct rt2860_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
3349 {
3350 int8_t delta_2ghz, delta_5ghz;
3351 uint32_t tmp;
3352 uint16_t val;
3353 int ridx, ant, i;
3354
3355 /* check whether the ROM is eFUSE ROM or EEPROM */
3356 sc->sc_srom_read = rt2860_eeprom_read_2;
3357 if (sc->mac_ver >= 0x3071) {
3358 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
3359 DPRINTF(("EFUSE_CTRL=0x%08x\n", tmp));
3360 if (tmp & RT3070_SEL_EFUSE)
3361 sc->sc_srom_read = rt3090_efuse_read_2;
3362 }
3363
3364 #ifdef RAL_DEBUG
3365 /* read EEPROM version */
3366 val = rt2860_srom_read(sc, RT2860_EEPROM_VERSION);
3367 DPRINTF(("EEPROM rev=%d, FAE=%d\n", val >> 8, val & 0xff));
3368 #endif
3369
3370 /* read MAC address */
3371 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC01);
3372 macaddr[0] = val & 0xff;
3373 macaddr[1] = val >> 8;
3374 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC23);
3375 macaddr[2] = val & 0xff;
3376 macaddr[3] = val >> 8;
3377 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC45);
3378 macaddr[4] = val & 0xff;
3379 macaddr[5] = val >> 8;
3380
3381 #ifdef RAL_DEBUG
3382 /* read country code */
3383 val = rt2860_srom_read(sc, RT2860_EEPROM_COUNTRY);
3384 DPRINTF(("EEPROM region code=0x%04x\n", val));
3385 #endif
3386
3387 /* read vendor BBP settings */
3388 for (i = 0; i < 8; i++) {
3389 val = rt2860_srom_read(sc, RT2860_EEPROM_BBP_BASE + i);
3390 sc->bbp[i].val = val & 0xff;
3391 sc->bbp[i].reg = val >> 8;
3392 DPRINTF(("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val));
3393 }
3394 if (sc->mac_ver >= 0x3071) {
3395 /* read vendor RF settings */
3396 for (i = 0; i < 10; i++) {
3397 val = rt2860_srom_read(sc, RT3071_EEPROM_RF_BASE + i);
3398 sc->rf[i].val = val & 0xff;
3399 sc->rf[i].reg = val >> 8;
3400 DPRINTF(("RF%d=0x%02x\n", sc->rf[i].reg,
3401 sc->rf[i].val));
3402 }
3403 }
3404
3405 /* read RF frequency offset from EEPROM */
3406 val = rt2860_srom_read(sc, RT2860_EEPROM_FREQ_LEDS);
3407 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0;
3408 DPRINTF(("EEPROM freq offset %d\n", sc->freq & 0xff));
3409 if ((val >> 8) != 0xff) {
3410 /* read LEDs operating mode */
3411 sc->leds = val >> 8;
3412 sc->led[0] = rt2860_srom_read(sc, RT2860_EEPROM_LED1);
3413 sc->led[1] = rt2860_srom_read(sc, RT2860_EEPROM_LED2);
3414 sc->led[2] = rt2860_srom_read(sc, RT2860_EEPROM_LED3);
3415 } else {
3416 /* broken EEPROM, use default settings */
3417 sc->leds = 0x01;
3418 sc->led[0] = 0x5555;
3419 sc->led[1] = 0x2221;
3420 sc->led[2] = 0xa9f8;
3421 }
3422 DPRINTF(("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n",
3423 sc->leds, sc->led[0], sc->led[1], sc->led[2]));
3424
3425 /* read RF information */
3426 val = rt2860_srom_read(sc, RT2860_EEPROM_ANTENNA);
3427 if (sc->mac_ver >= 0x5390)
3428 sc->rf_rev = rt2860_srom_read(sc, RT2860_EEPROM_CHIPID);
3429 else
3430 sc->rf_rev = (val >> 8) & 0xf;
3431 sc->ntxchains = (val >> 4) & 0xf;
3432 sc->nrxchains = val & 0xf;
3433 DPRINTF(("EEPROM RF rev=0x%02x chains=%dT%dR\n",
3434 sc->rf_rev, sc->ntxchains, sc->nrxchains));
3435
3436 /* check if RF supports automatic Tx access gain control */
3437 val = rt2860_srom_read(sc, RT2860_EEPROM_CONFIG);
3438 DPRINTF(("EEPROM CFG 0x%04x\n", val));
3439 /* check if driver should patch the DAC issue */
3440 if ((val >> 8) != 0xff)
3441 sc->patch_dac = (val >> 15) & 1;
3442 if ((val & 0xff) != 0xff) {
3443 sc->ext_5ghz_lna = (val >> 3) & 1;
3444 sc->ext_2ghz_lna = (val >> 2) & 1;
3445 /* check if RF supports automatic Tx access gain control */
3446 sc->calib_2ghz = sc->calib_5ghz = 0; /* XXX (val >> 1) & 1 */
3447 /* check if we have a hardware radio switch */
3448 sc->rfswitch = val & 1;
3449 }
3450 if (sc->sc_flags & RT2860_ADVANCED_PS) {
3451 /* read PCIe power save level */
3452 val = rt2860_srom_read(sc, RT2860_EEPROM_PCIE_PSLEVEL);
3453 if ((val & 0xff) != 0xff) {
3454 sc->pslevel = val & 0x3;
3455 val = rt2860_srom_read(sc, RT2860_EEPROM_REV);
3456 if ((val & 0xff80) != 0x9280)
3457 sc->pslevel = MIN(sc->pslevel, 1);
3458 DPRINTF(("EEPROM PCIe PS Level=%d\n", sc->pslevel));
3459 }
3460 }
3461
3462 /* read power settings for 2GHz channels */
3463 for (i = 0; i < 14; i += 2) {
3464 val = rt2860_srom_read(sc,
3465 RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2);
3466 sc->txpow1[i + 0] = (int8_t)(val & 0xff);
3467 sc->txpow1[i + 1] = (int8_t)(val >> 8);
3468
3469 if (sc->mac_ver != 0x5390) {
3470 val = rt2860_srom_read(sc,
3471 RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2);
3472 sc->txpow2[i + 0] = (int8_t)(val & 0xff);
3473 sc->txpow2[i + 1] = (int8_t)(val >> 8);
3474 }
3475 }
3476 /* fix broken Tx power entries */
3477 for (i = 0; i < 14; i++) {
3478 if (sc->txpow1[i] < 0 ||
3479 sc->txpow1[i] > ((sc->mac_ver >= 0x5390) ? 39 : 31))
3480 sc->txpow1[i] = 5;
3481 if (sc->mac_ver != 0x5390) {
3482 if (sc->txpow2[i] < 0 ||
3483 sc->txpow2[i] > ((sc->mac_ver == 0x5392) ? 39 : 31))
3484 sc->txpow2[i] = 5;
3485 }
3486 DPRINTF(("chan %d: power1=%d, power2=%d\n",
3487 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]));
3488 }
3489 /* read power settings for 5GHz channels */
3490 for (i = 0; i < 40; i += 2) {
3491 val = rt2860_srom_read(sc,
3492 RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2);
3493 sc->txpow1[i + 14] = (int8_t)(val & 0xff);
3494 sc->txpow1[i + 15] = (int8_t)(val >> 8);
3495
3496 val = rt2860_srom_read(sc,
3497 RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2);
3498 sc->txpow2[i + 14] = (int8_t)(val & 0xff);
3499 sc->txpow2[i + 15] = (int8_t)(val >> 8);
3500 }
3501 /* fix broken Tx power entries */
3502 for (i = 0; i < 40; i++) {
3503 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15)
3504 sc->txpow1[14 + i] = 5;
3505 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15)
3506 sc->txpow2[14 + i] = 5;
3507 DPRINTF(("chan %d: power1=%d, power2=%d\n",
3508 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i],
3509 sc->txpow2[14 + i]));
3510 }
3511
3512 /* read Tx power compensation for each Tx rate */
3513 val = rt2860_srom_read(sc, RT2860_EEPROM_DELTAPWR);
3514 delta_2ghz = delta_5ghz = 0;
3515 if ((val & 0xff) != 0xff && (val & 0x80)) {
3516 delta_2ghz = val & 0xf;
3517 if (!(val & 0x40)) /* negative number */
3518 delta_2ghz = -delta_2ghz;
3519 }
3520 val >>= 8;
3521 if ((val & 0xff) != 0xff && (val & 0x80)) {
3522 delta_5ghz = val & 0xf;
3523 if (!(val & 0x40)) /* negative number */
3524 delta_5ghz = -delta_5ghz;
3525 }
3526 DPRINTF(("power compensation=%d (2GHz), %d (5GHz)\n",
3527 delta_2ghz, delta_5ghz));
3528
3529 for (ridx = 0; ridx < 5; ridx++) {
3530 uint32_t reg;
3531
3532 val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2);
3533 reg = val;
3534 val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1);
3535 reg |= (uint32_t)val << 16;
3536
3537 sc->txpow20mhz[ridx] = reg;
3538 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz);
3539 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz);
3540
3541 DPRINTF(("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, "
3542 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx],
3543 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]));
3544 }
3545
3546 /* read factory-calibrated samples for temperature compensation */
3547 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_2GHZ);
3548 sc->tssi_2ghz[0] = val & 0xff; /* [-4] */
3549 sc->tssi_2ghz[1] = val >> 8; /* [-3] */
3550 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_2GHZ);
3551 sc->tssi_2ghz[2] = val & 0xff; /* [-2] */
3552 sc->tssi_2ghz[3] = val >> 8; /* [-1] */
3553 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_2GHZ);
3554 sc->tssi_2ghz[4] = val & 0xff; /* [+0] */
3555 sc->tssi_2ghz[5] = val >> 8; /* [+1] */
3556 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_2GHZ);
3557 sc->tssi_2ghz[6] = val & 0xff; /* [+2] */
3558 sc->tssi_2ghz[7] = val >> 8; /* [+3] */
3559 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_2GHZ);
3560 sc->tssi_2ghz[8] = val & 0xff; /* [+4] */
3561 sc->step_2ghz = val >> 8;
3562 DPRINTF(("TSSI 2GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
3563 "0x%02x 0x%02x step=%d\n", sc->tssi_2ghz[0], sc->tssi_2ghz[1],
3564 sc->tssi_2ghz[2], sc->tssi_2ghz[3], sc->tssi_2ghz[4],
3565 sc->tssi_2ghz[5], sc->tssi_2ghz[6], sc->tssi_2ghz[7],
3566 sc->tssi_2ghz[8], sc->step_2ghz));
3567 /* check that ref value is correct, otherwise disable calibration */
3568 if (sc->tssi_2ghz[4] == 0xff)
3569 sc->calib_2ghz = 0;
3570
3571 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_5GHZ);
3572 sc->tssi_5ghz[0] = val & 0xff; /* [-4] */
3573 sc->tssi_5ghz[1] = val >> 8; /* [-3] */
3574 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_5GHZ);
3575 sc->tssi_5ghz[2] = val & 0xff; /* [-2] */
3576 sc->tssi_5ghz[3] = val >> 8; /* [-1] */
3577 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_5GHZ);
3578 sc->tssi_5ghz[4] = val & 0xff; /* [+0] */
3579 sc->tssi_5ghz[5] = val >> 8; /* [+1] */
3580 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_5GHZ);
3581 sc->tssi_5ghz[6] = val & 0xff; /* [+2] */
3582 sc->tssi_5ghz[7] = val >> 8; /* [+3] */
3583 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_5GHZ);
3584 sc->tssi_5ghz[8] = val & 0xff; /* [+4] */
3585 sc->step_5ghz = val >> 8;
3586 DPRINTF(("TSSI 5GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
3587 "0x%02x 0x%02x step=%d\n", sc->tssi_5ghz[0], sc->tssi_5ghz[1],
3588 sc->tssi_5ghz[2], sc->tssi_5ghz[3], sc->tssi_5ghz[4],
3589 sc->tssi_5ghz[5], sc->tssi_5ghz[6], sc->tssi_5ghz[7],
3590 sc->tssi_5ghz[8], sc->step_5ghz));
3591 /* check that ref value is correct, otherwise disable calibration */
3592 if (sc->tssi_5ghz[4] == 0xff)
3593 sc->calib_5ghz = 0;
3594
3595 /* read RSSI offsets and LNA gains from EEPROM */
3596 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ);
3597 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */
3598 sc->rssi_2ghz[1] = val >> 8; /* Ant B */
3599 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ);
3600 if (sc->mac_ver >= 0x3071) {
3601 /*
3602 * On RT3090 chips (limited to 2 Rx chains), this ROM
3603 * field contains the Tx mixer gain for the 2GHz band.
3604 */
3605 if ((val & 0xff) != 0xff)
3606 sc->txmixgain_2ghz = val & 0x7;
3607 DPRINTF(("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz));
3608 } else
3609 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */
3610 sc->lna[2] = val >> 8; /* channel group 2 */
3611
3612 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ);
3613 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */
3614 sc->rssi_5ghz[1] = val >> 8; /* Ant B */
3615 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ);
3616 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */
3617 sc->lna[3] = val >> 8; /* channel group 3 */
3618
3619 val = rt2860_srom_read(sc, RT2860_EEPROM_LNA);
3620 if (sc->mac_ver >= 0x3071)
3621 sc->lna[0] = RT3090_DEF_LNA;
3622 else /* channel group 0 */
3623 sc->lna[0] = val & 0xff;
3624 sc->lna[1] = val >> 8; /* channel group 1 */
3625
3626 /* fix broken 5GHz LNA entries */
3627 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) {
3628 DPRINTF(("invalid LNA for channel group %d\n", 2));
3629 sc->lna[2] = sc->lna[1];
3630 }
3631 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) {
3632 DPRINTF(("invalid LNA for channel group %d\n", 3));
3633 sc->lna[3] = sc->lna[1];
3634 }
3635
3636 /* fix broken RSSI offset entries */
3637 for (ant = 0; ant < 3; ant++) {
3638 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) {
3639 DPRINTF(("invalid RSSI%d offset: %d (2GHz)\n",
3640 ant + 1, sc->rssi_2ghz[ant]));
3641 sc->rssi_2ghz[ant] = 0;
3642 }
3643 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) {
3644 DPRINTF(("invalid RSSI%d offset: %d (5GHz)\n",
3645 ant + 1, sc->rssi_5ghz[ant]));
3646 sc->rssi_5ghz[ant] = 0;
3647 }
3648 }
3649
3650 return 0;
3651 }
3652
3653 static int
rt2860_bbp_init(struct rt2860_softc * sc)3654 rt2860_bbp_init(struct rt2860_softc *sc)
3655 {
3656 int i, ntries;
3657
3658 /* wait for BBP to wake up */
3659 for (ntries = 0; ntries < 20; ntries++) {
3660 uint8_t bbp0 = rt2860_mcu_bbp_read(sc, 0);
3661 if (bbp0 != 0 && bbp0 != 0xff)
3662 break;
3663 }
3664 if (ntries == 20) {
3665 device_printf(sc->sc_dev,
3666 "timeout waiting for BBP to wake up\n");
3667 return (ETIMEDOUT);
3668 }
3669
3670 /* initialize BBP registers to default values */
3671 if (sc->mac_ver >= 0x5390)
3672 rt5390_bbp_init(sc);
3673 else {
3674 for (i = 0; i < nitems(rt2860_def_bbp); i++) {
3675 rt2860_mcu_bbp_write(sc, rt2860_def_bbp[i].reg,
3676 rt2860_def_bbp[i].val);
3677 }
3678 }
3679
3680 /* fix BBP84 for RT2860E */
3681 if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101)
3682 rt2860_mcu_bbp_write(sc, 84, 0x19);
3683
3684 if (sc->mac_ver >= 0x3071) {
3685 rt2860_mcu_bbp_write(sc, 79, 0x13);
3686 rt2860_mcu_bbp_write(sc, 80, 0x05);
3687 rt2860_mcu_bbp_write(sc, 81, 0x33);
3688 } else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) {
3689 rt2860_mcu_bbp_write(sc, 69, 0x16);
3690 rt2860_mcu_bbp_write(sc, 73, 0x12);
3691 }
3692
3693 return 0;
3694 }
3695
3696 static void
rt5390_bbp_init(struct rt2860_softc * sc)3697 rt5390_bbp_init(struct rt2860_softc *sc)
3698 {
3699 uint8_t bbp;
3700 int i;
3701
3702 /* Apply maximum likelihood detection for 2 stream case. */
3703 if (sc->nrxchains > 1) {
3704 bbp = rt2860_mcu_bbp_read(sc, 105);
3705 rt2860_mcu_bbp_write(sc, 105, bbp | RT5390_MLD);
3706 }
3707
3708 /* Avoid data lost and CRC error. */
3709 bbp = rt2860_mcu_bbp_read(sc, 4);
3710 rt2860_mcu_bbp_write(sc, 4, bbp | RT5390_MAC_IF_CTRL);
3711
3712 for (i = 0; i < nitems(rt5390_def_bbp); i++) {
3713 rt2860_mcu_bbp_write(sc, rt5390_def_bbp[i].reg,
3714 rt5390_def_bbp[i].val);
3715 }
3716
3717 if (sc->mac_ver == 0x5392) {
3718 rt2860_mcu_bbp_write(sc, 84, 0x9a);
3719 rt2860_mcu_bbp_write(sc, 95, 0x9a);
3720 rt2860_mcu_bbp_write(sc, 98, 0x12);
3721 rt2860_mcu_bbp_write(sc, 106, 0x05);
3722 rt2860_mcu_bbp_write(sc, 134, 0xd0);
3723 rt2860_mcu_bbp_write(sc, 135, 0xf6);
3724 }
3725
3726 bbp = rt2860_mcu_bbp_read(sc, 152);
3727 rt2860_mcu_bbp_write(sc, 152, bbp | 0x80);
3728
3729 /* Disable hardware antenna diversity. */
3730 if (sc->mac_ver == 0x5390)
3731 rt2860_mcu_bbp_write(sc, 154, 0);
3732 }
3733
3734 static int
rt2860_txrx_enable(struct rt2860_softc * sc)3735 rt2860_txrx_enable(struct rt2860_softc *sc)
3736 {
3737 struct ieee80211com *ic = &sc->sc_ic;
3738 uint32_t tmp;
3739 int ntries;
3740
3741 /* enable Tx/Rx DMA engine */
3742 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN);
3743 RAL_BARRIER_READ_WRITE(sc);
3744 for (ntries = 0; ntries < 200; ntries++) {
3745 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
3746 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
3747 break;
3748 DELAY(1000);
3749 }
3750 if (ntries == 200) {
3751 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n");
3752 return ETIMEDOUT;
3753 }
3754
3755 DELAY(50);
3756
3757 tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN |
3758 RT2860_WPDMA_BT_SIZE64 << RT2860_WPDMA_BT_SIZE_SHIFT;
3759 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
3760
3761 /* set Rx filter */
3762 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR;
3763 if (ic->ic_opmode != IEEE80211_M_MONITOR) {
3764 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL |
3765 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK |
3766 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV |
3767 RT2860_DROP_CFACK | RT2860_DROP_CFEND;
3768 if (ic->ic_opmode == IEEE80211_M_STA)
3769 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL;
3770 }
3771 RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp);
3772
3773 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL,
3774 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
3775
3776 return 0;
3777 }
3778
3779 static void
rt2860_init(void * arg)3780 rt2860_init(void *arg)
3781 {
3782 struct rt2860_softc *sc = arg;
3783 struct ieee80211com *ic = &sc->sc_ic;
3784
3785 RAL_LOCK(sc);
3786 rt2860_init_locked(sc);
3787 RAL_UNLOCK(sc);
3788
3789 if (sc->sc_flags & RT2860_RUNNING)
3790 ieee80211_start_all(ic);
3791 }
3792
3793 static void
rt2860_init_locked(struct rt2860_softc * sc)3794 rt2860_init_locked(struct rt2860_softc *sc)
3795 {
3796 struct ieee80211com *ic = &sc->sc_ic;
3797 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
3798 uint32_t tmp;
3799 uint8_t bbp1, bbp3;
3800 int i, qid, ridx, ntries, error;
3801
3802 RAL_LOCK_ASSERT(sc);
3803
3804 if (sc->rfswitch) {
3805 /* hardware has a radio switch on GPIO pin 2 */
3806 if (!(RAL_READ(sc, RT2860_GPIO_CTRL) & (1 << 2))) {
3807 device_printf(sc->sc_dev,
3808 "radio is disabled by hardware switch\n");
3809 #ifdef notyet
3810 rt2860_stop_locked(sc);
3811 return;
3812 #endif
3813 }
3814 }
3815 RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE);
3816
3817 /* disable DMA */
3818 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
3819 tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
3820 RT2860_TX_DMA_EN);
3821 tmp |= RT2860_TX_WB_DDONE;
3822 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
3823
3824 /* reset DMA indexes */
3825 RAL_WRITE(sc, RT2860_WPDMA_RST_IDX, RT2860_RST_DRX_IDX0 |
3826 RT2860_RST_DTX_IDX5 | RT2860_RST_DTX_IDX4 | RT2860_RST_DTX_IDX3 |
3827 RT2860_RST_DTX_IDX2 | RT2860_RST_DTX_IDX1 | RT2860_RST_DTX_IDX0);
3828
3829 /* PBF hardware reset */
3830 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f);
3831 RAL_BARRIER_WRITE(sc);
3832 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00);
3833
3834 if ((error = rt2860_load_microcode(sc)) != 0) {
3835 device_printf(sc->sc_dev, "could not load 8051 microcode\n");
3836 rt2860_stop_locked(sc);
3837 return;
3838 }
3839
3840 rt2860_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr);
3841
3842 /* init Tx power for all Tx rates (from EEPROM) */
3843 for (ridx = 0; ridx < 5; ridx++) {
3844 if (sc->txpow20mhz[ridx] == 0xffffffff)
3845 continue;
3846 RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]);
3847 }
3848
3849 for (ntries = 0; ntries < 100; ntries++) {
3850 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
3851 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
3852 break;
3853 DELAY(1000);
3854 }
3855 if (ntries == 100) {
3856 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n");
3857 rt2860_stop_locked(sc);
3858 return;
3859 }
3860 tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
3861 RT2860_TX_DMA_EN);
3862 tmp |= RT2860_TX_WB_DDONE;
3863 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
3864
3865 /* reset Rx ring and all 6 Tx rings */
3866 RAL_WRITE(sc, RT2860_WPDMA_RST_IDX, 0x1003f);
3867
3868 /* PBF hardware reset */
3869 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f);
3870 RAL_BARRIER_WRITE(sc);
3871 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00);
3872
3873 RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE | RT2860_IO_RF_PE);
3874
3875 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST);
3876 RAL_BARRIER_WRITE(sc);
3877 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0);
3878
3879 for (i = 0; i < nitems(rt2860_def_mac); i++)
3880 RAL_WRITE(sc, rt2860_def_mac[i].reg, rt2860_def_mac[i].val);
3881 if (sc->mac_ver >= 0x5390)
3882 RAL_WRITE(sc, RT2860_TX_SW_CFG0, 0x00000404);
3883 else if (sc->mac_ver >= 0x3071) {
3884 /* set delay of PA_PE assertion to 1us (unit of 0.25us) */
3885 RAL_WRITE(sc, RT2860_TX_SW_CFG0,
3886 4 << RT2860_DLY_PAPE_EN_SHIFT);
3887 }
3888
3889 if (!(RAL_READ(sc, RT2860_PCI_CFG) & RT2860_PCI_CFG_PCI)) {
3890 sc->sc_flags |= RT2860_PCIE;
3891 /* PCIe has different clock cycle count than PCI */
3892 tmp = RAL_READ(sc, RT2860_US_CYC_CNT);
3893 tmp = (tmp & ~0xff) | 0x7d;
3894 RAL_WRITE(sc, RT2860_US_CYC_CNT, tmp);
3895 }
3896
3897 /* wait while MAC is busy */
3898 for (ntries = 0; ntries < 100; ntries++) {
3899 if (!(RAL_READ(sc, RT2860_MAC_STATUS_REG) &
3900 (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY)))
3901 break;
3902 DELAY(1000);
3903 }
3904 if (ntries == 100) {
3905 device_printf(sc->sc_dev, "timeout waiting for MAC\n");
3906 rt2860_stop_locked(sc);
3907 return;
3908 }
3909
3910 /* clear Host to MCU mailbox */
3911 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0);
3912 RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0);
3913
3914 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0);
3915 DELAY(1000);
3916
3917 if ((error = rt2860_bbp_init(sc)) != 0) {
3918 rt2860_stop_locked(sc);
3919 return;
3920 }
3921
3922 /* clear RX WCID search table */
3923 RAL_SET_REGION_4(sc, RT2860_WCID_ENTRY(0), 0, 512);
3924 /* clear pairwise key table */
3925 RAL_SET_REGION_4(sc, RT2860_PKEY(0), 0, 2048);
3926 /* clear IV/EIV table */
3927 RAL_SET_REGION_4(sc, RT2860_IVEIV(0), 0, 512);
3928 /* clear WCID attribute table */
3929 RAL_SET_REGION_4(sc, RT2860_WCID_ATTR(0), 0, 256);
3930 /* clear shared key table */
3931 RAL_SET_REGION_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32);
3932 /* clear shared key mode */
3933 RAL_SET_REGION_4(sc, RT2860_SKEY_MODE_0_7, 0, 4);
3934
3935 /* init Tx rings (4 EDCAs + HCCA + Mgt) */
3936 for (qid = 0; qid < 6; qid++) {
3937 RAL_WRITE(sc, RT2860_TX_BASE_PTR(qid), sc->txq[qid].paddr);
3938 RAL_WRITE(sc, RT2860_TX_MAX_CNT(qid), RT2860_TX_RING_COUNT);
3939 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), 0);
3940 }
3941
3942 /* init Rx ring */
3943 RAL_WRITE(sc, RT2860_RX_BASE_PTR, sc->rxq.paddr);
3944 RAL_WRITE(sc, RT2860_RX_MAX_CNT, RT2860_RX_RING_COUNT);
3945 RAL_WRITE(sc, RT2860_RX_CALC_IDX, RT2860_RX_RING_COUNT - 1);
3946
3947 /* setup maximum buffer sizes */
3948 RAL_WRITE(sc, RT2860_MAX_LEN_CFG, 1 << 12 |
3949 (MCLBYTES - sizeof (struct rt2860_rxwi) - 2));
3950
3951 for (ntries = 0; ntries < 100; ntries++) {
3952 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
3953 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
3954 break;
3955 DELAY(1000);
3956 }
3957 if (ntries == 100) {
3958 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n");
3959 rt2860_stop_locked(sc);
3960 return;
3961 }
3962 tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
3963 RT2860_TX_DMA_EN);
3964 tmp |= RT2860_TX_WB_DDONE;
3965 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
3966
3967 /* disable interrupts mitigation */
3968 RAL_WRITE(sc, RT2860_DELAY_INT_CFG, 0);
3969
3970 /* write vendor-specific BBP values (from EEPROM) */
3971 for (i = 0; i < 8; i++) {
3972 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff)
3973 continue;
3974 rt2860_mcu_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val);
3975 }
3976
3977 /* select Main antenna for 1T1R devices */
3978 if (sc->rf_rev == RT3070_RF_2020 ||
3979 sc->rf_rev == RT3070_RF_3020 ||
3980 sc->rf_rev == RT3070_RF_3320 ||
3981 sc->mac_ver == 0x5390)
3982 rt3090_set_rx_antenna(sc, 0);
3983
3984 /* send LEDs operating mode to microcontroller */
3985 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0], 0);
3986 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1], 0);
3987 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2], 0);
3988
3989 if (sc->mac_ver >= 0x5390)
3990 rt5390_rf_init(sc);
3991 else if (sc->mac_ver >= 0x3071) {
3992 if ((error = rt3090_rf_init(sc)) != 0) {
3993 rt2860_stop_locked(sc);
3994 return;
3995 }
3996 }
3997
3998 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_SLEEP, 0x02ff, 1);
3999 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_WAKEUP, 0, 1);
4000
4001 if (sc->mac_ver >= 0x5390)
4002 rt5390_rf_wakeup(sc);
4003 else if (sc->mac_ver >= 0x3071)
4004 rt3090_rf_wakeup(sc);
4005
4006 /* disable non-existing Rx chains */
4007 bbp3 = rt2860_mcu_bbp_read(sc, 3);
4008 bbp3 &= ~(1 << 3 | 1 << 4);
4009 if (sc->nrxchains == 2)
4010 bbp3 |= 1 << 3;
4011 else if (sc->nrxchains == 3)
4012 bbp3 |= 1 << 4;
4013 rt2860_mcu_bbp_write(sc, 3, bbp3);
4014
4015 /* disable non-existing Tx chains */
4016 bbp1 = rt2860_mcu_bbp_read(sc, 1);
4017 if (sc->ntxchains == 1)
4018 bbp1 = (bbp1 & ~(1 << 3 | 1 << 4));
4019 else if (sc->mac_ver == 0x3593 && sc->ntxchains == 2)
4020 bbp1 = (bbp1 & ~(1 << 4)) | 1 << 3;
4021 else if (sc->mac_ver == 0x3593 && sc->ntxchains == 3)
4022 bbp1 = (bbp1 & ~(1 << 3)) | 1 << 4;
4023 rt2860_mcu_bbp_write(sc, 1, bbp1);
4024
4025 if (sc->mac_ver >= 0x3071)
4026 rt3090_rf_setup(sc);
4027
4028 /* select default channel */
4029 rt2860_switch_chan(sc, ic->ic_curchan);
4030
4031 /* reset RF from MCU */
4032 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0);
4033
4034 /* set RTS threshold */
4035 tmp = RAL_READ(sc, RT2860_TX_RTS_CFG);
4036 tmp &= ~0xffff00;
4037 tmp |= IEEE80211_RTS_DEFAULT << 8;
4038 RAL_WRITE(sc, RT2860_TX_RTS_CFG, tmp);
4039
4040 /* setup initial protection mode */
4041 rt2860_updateprot(sc);
4042
4043 /* turn radio LED on */
4044 rt2860_set_leds(sc, RT2860_LED_RADIO);
4045
4046 /* enable Tx/Rx DMA engine */
4047 if ((error = rt2860_txrx_enable(sc)) != 0) {
4048 rt2860_stop_locked(sc);
4049 return;
4050 }
4051
4052 /* clear pending interrupts */
4053 RAL_WRITE(sc, RT2860_INT_STATUS, 0xffffffff);
4054 /* enable interrupts */
4055 RAL_WRITE(sc, RT2860_INT_MASK, 0x3fffc);
4056
4057 if (sc->sc_flags & RT2860_ADVANCED_PS)
4058 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_PSLEVEL, sc->pslevel, 0);
4059
4060 sc->sc_flags |= RT2860_RUNNING;
4061
4062 callout_reset(&sc->watchdog_ch, hz, rt2860_watchdog, sc);
4063 }
4064
4065 static void
rt2860_stop(void * arg)4066 rt2860_stop(void *arg)
4067 {
4068 struct rt2860_softc *sc = arg;
4069
4070 RAL_LOCK(sc);
4071 rt2860_stop_locked(sc);
4072 RAL_UNLOCK(sc);
4073 }
4074
4075 static void
rt2860_stop_locked(struct rt2860_softc * sc)4076 rt2860_stop_locked(struct rt2860_softc *sc)
4077 {
4078 uint32_t tmp;
4079 int qid;
4080
4081 if (sc->sc_flags & RT2860_RUNNING)
4082 rt2860_set_leds(sc, 0); /* turn all LEDs off */
4083
4084 callout_stop(&sc->watchdog_ch);
4085 sc->sc_tx_timer = 0;
4086 sc->sc_flags &= ~RT2860_RUNNING;
4087
4088 /* disable interrupts */
4089 RAL_WRITE(sc, RT2860_INT_MASK, 0);
4090
4091 /* disable GP timer */
4092 rt2860_set_gp_timer(sc, 0);
4093
4094 /* disable Rx */
4095 tmp = RAL_READ(sc, RT2860_MAC_SYS_CTRL);
4096 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
4097 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, tmp);
4098
4099 /* reset adapter */
4100 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST);
4101 RAL_BARRIER_WRITE(sc);
4102 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0);
4103
4104 /* reset Tx and Rx rings (and reclaim TXWIs) */
4105 sc->qfullmsk = 0;
4106 for (qid = 0; qid < 6; qid++)
4107 rt2860_reset_tx_ring(sc, &sc->txq[qid]);
4108 rt2860_reset_rx_ring(sc, &sc->rxq);
4109 }
4110
4111 int
rt2860_load_microcode(struct rt2860_softc * sc)4112 rt2860_load_microcode(struct rt2860_softc *sc)
4113 {
4114 const struct firmware *fp;
4115 int ntries, error;
4116
4117 RAL_LOCK_ASSERT(sc);
4118
4119 RAL_UNLOCK(sc);
4120 fp = firmware_get("rt2860fw");
4121 RAL_LOCK(sc);
4122 if (fp == NULL) {
4123 device_printf(sc->sc_dev,
4124 "unable to receive rt2860fw firmware image\n");
4125 return EINVAL;
4126 }
4127
4128 /* set "host program ram write selection" bit */
4129 RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_HST_PM_SEL);
4130 /* write microcode image */
4131 RAL_WRITE_REGION_1(sc, RT2860_FW_BASE, fp->data, fp->datasize);
4132 /* kick microcontroller unit */
4133 RAL_WRITE(sc, RT2860_SYS_CTRL, 0);
4134 RAL_BARRIER_WRITE(sc);
4135 RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_MCU_RESET);
4136
4137 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0);
4138 RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0);
4139
4140 /* wait until microcontroller is ready */
4141 RAL_BARRIER_READ_WRITE(sc);
4142 for (ntries = 0; ntries < 1000; ntries++) {
4143 if (RAL_READ(sc, RT2860_SYS_CTRL) & RT2860_MCU_READY)
4144 break;
4145 DELAY(1000);
4146 }
4147 if (ntries == 1000) {
4148 device_printf(sc->sc_dev,
4149 "timeout waiting for MCU to initialize\n");
4150 error = ETIMEDOUT;
4151 } else
4152 error = 0;
4153
4154 firmware_put(fp, FIRMWARE_UNLOAD);
4155 return error;
4156 }
4157
4158 /*
4159 * This function is called periodically to adjust Tx power based on
4160 * temperature variation.
4161 */
4162 #ifdef NOT_YET
4163 static void
rt2860_calib(struct rt2860_softc * sc)4164 rt2860_calib(struct rt2860_softc *sc)
4165 {
4166 struct ieee80211com *ic = &sc->sc_ic;
4167 const uint8_t *tssi;
4168 uint8_t step, bbp49;
4169 int8_t ridx, d;
4170
4171 /* read current temperature */
4172 bbp49 = rt2860_mcu_bbp_read(sc, 49);
4173
4174 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan)) {
4175 tssi = &sc->tssi_2ghz[4];
4176 step = sc->step_2ghz;
4177 } else {
4178 tssi = &sc->tssi_5ghz[4];
4179 step = sc->step_5ghz;
4180 }
4181
4182 if (bbp49 < tssi[0]) { /* lower than reference */
4183 /* use higher Tx power than default */
4184 for (d = 0; d > -4 && bbp49 <= tssi[d - 1]; d--);
4185 } else if (bbp49 > tssi[0]) { /* greater than reference */
4186 /* use lower Tx power than default */
4187 for (d = 0; d < +4 && bbp49 >= tssi[d + 1]; d++);
4188 } else {
4189 /* use default Tx power */
4190 d = 0;
4191 }
4192 d *= step;
4193
4194 DPRINTF(("BBP49=0x%02x, adjusting Tx power by %d\n", bbp49, d));
4195
4196 /* write adjusted Tx power values for each Tx rate */
4197 for (ridx = 0; ridx < 5; ridx++) {
4198 if (sc->txpow20mhz[ridx] == 0xffffffff)
4199 continue;
4200 RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx),
4201 b4inc(sc->txpow20mhz[ridx], d));
4202 }
4203 }
4204 #endif
4205
4206 static void
rt3090_set_rx_antenna(struct rt2860_softc * sc,int aux)4207 rt3090_set_rx_antenna(struct rt2860_softc *sc, int aux)
4208 {
4209 uint32_t tmp;
4210
4211 if (aux) {
4212 if (sc->mac_ver == 0x5390) {
4213 rt2860_mcu_bbp_write(sc, 152,
4214 rt2860_mcu_bbp_read(sc, 152) & ~0x80);
4215 } else {
4216 tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
4217 RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp & ~RT2860_C);
4218 tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
4219 RAL_WRITE(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08);
4220 }
4221 } else {
4222 if (sc->mac_ver == 0x5390) {
4223 rt2860_mcu_bbp_write(sc, 152,
4224 rt2860_mcu_bbp_read(sc, 152) | 0x80);
4225 } else {
4226 tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
4227 RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp | RT2860_C);
4228 tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
4229 RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp & ~0x0808);
4230 }
4231 }
4232 }
4233
4234 static void
rt2860_switch_chan(struct rt2860_softc * sc,struct ieee80211_channel * c)4235 rt2860_switch_chan(struct rt2860_softc *sc, struct ieee80211_channel *c)
4236 {
4237 struct ieee80211com *ic = &sc->sc_ic;
4238 u_int chan, group;
4239
4240 chan = ieee80211_chan2ieee(ic, c);
4241 if (chan == 0 || chan == IEEE80211_CHAN_ANY)
4242 return;
4243
4244 if (sc->mac_ver >= 0x5390)
4245 rt5390_set_chan(sc, chan);
4246 else if (sc->mac_ver >= 0x3071)
4247 rt3090_set_chan(sc, chan);
4248 else
4249 rt2860_set_chan(sc, chan);
4250
4251 /* determine channel group */
4252 if (chan <= 14)
4253 group = 0;
4254 else if (chan <= 64)
4255 group = 1;
4256 else if (chan <= 128)
4257 group = 2;
4258 else
4259 group = 3;
4260
4261 /* XXX necessary only when group has changed! */
4262 if (sc->mac_ver < 0x5390)
4263 rt2860_select_chan_group(sc, group);
4264
4265 DELAY(1000);
4266 }
4267
4268 static int
rt2860_setup_beacon(struct rt2860_softc * sc,struct ieee80211vap * vap)4269 rt2860_setup_beacon(struct rt2860_softc *sc, struct ieee80211vap *vap)
4270 {
4271 struct ieee80211com *ic = vap->iv_ic;
4272 struct rt2860_txwi txwi;
4273 struct mbuf *m;
4274 int ridx;
4275
4276 if ((m = ieee80211_beacon_alloc(vap->iv_bss)) == NULL)
4277 return ENOBUFS;
4278
4279 memset(&txwi, 0, sizeof txwi);
4280 txwi.wcid = 0xff;
4281 txwi.len = htole16(m->m_pkthdr.len);
4282 /* send beacons at the lowest available rate */
4283 ridx = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ?
4284 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
4285 txwi.phy = htole16(rt2860_rates[ridx].mcs);
4286 if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM)
4287 txwi.phy |= htole16(RT2860_PHY_OFDM);
4288 txwi.txop = RT2860_TX_TXOP_HT;
4289 txwi.flags = RT2860_TX_TS;
4290 txwi.xflags = RT2860_TX_NSEQ;
4291
4292 RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0),
4293 (uint8_t *)&txwi, sizeof txwi);
4294 RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0) + sizeof txwi,
4295 mtod(m, uint8_t *), m->m_pkthdr.len);
4296
4297 m_freem(m);
4298
4299 return 0;
4300 }
4301
4302 static void
rt2860_enable_tsf_sync(struct rt2860_softc * sc)4303 rt2860_enable_tsf_sync(struct rt2860_softc *sc)
4304 {
4305 struct ieee80211com *ic = &sc->sc_ic;
4306 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
4307 uint32_t tmp;
4308
4309 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG);
4310
4311 tmp &= ~0x1fffff;
4312 tmp |= vap->iv_bss->ni_intval * 16;
4313 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN;
4314 if (vap->iv_opmode == IEEE80211_M_STA) {
4315 /*
4316 * Local TSF is always updated with remote TSF on beacon
4317 * reception.
4318 */
4319 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT;
4320 }
4321 else if (vap->iv_opmode == IEEE80211_M_IBSS ||
4322 vap->iv_opmode == IEEE80211_M_MBSS) {
4323 tmp |= RT2860_BCN_TX_EN;
4324 /*
4325 * Local TSF is updated with remote TSF on beacon reception
4326 * only if the remote TSF is greater than local TSF.
4327 */
4328 tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT;
4329 } else if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
4330 tmp |= RT2860_BCN_TX_EN;
4331 /* SYNC with nobody */
4332 tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT;
4333 }
4334
4335 RAL_WRITE(sc, RT2860_BCN_TIME_CFG, tmp);
4336 }
4337