1# 2# PB92 -- Kernel configuration file for FreeBSD/mips for Atheros PB92 reference 3# board (AR7242) 4# 5# $FreeBSD$ 6# 7 8ident PB92 9# XXX The default load address in the Uboot environment is 0x80010000 10makeoptions KERNLOADADDR=0x80050000 11options HZ=1000 12 13# The PB92 has 32mb of RAM; hard-code that 14options AR71XX_REALMEM=32*1024*1024 15 16# It's UBOOT, not Redboot - without this, things will hang at startup 17options AR71XX_ENV_UBOOT 18 19# We have to build most things as modules rather than in the kernel. 20# The PB92 has 4MB of SPI flash and the default kernel "partition" 21# is only 892KiB. In order to try and squeeze into that (so people 22# who already are using it without modifying the default flash layout) 23# we need to cut down on a lot of things. 24 25makeoptions MODULES_OVERRIDE="ath ath_pci ath_ahb bridgestp if_bridge if_gif if_gre wlan wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt wlan_tkip wlan_wep wlan_xauth usb ar71xx" 26 27hints "PB92.hints" 28include "../atheros/std.ar71xx" 29 30makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 31makeoptions MODULES_OVERRIDE="" 32 33options DDB 34options KDB 35 36options SCHED_4BSD #4BSD scheduler 37options INET #InterNETworking 38# Can't do IPv6 - it just doesn't fit. 39# options INET6 40options TCP_HHOOK # hhook(9) framework for TCP 41# options NFSCL #Network Filesystem Client 42options PSEUDOFS #Pseudo-filesystem framework 43options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions 44options ALQ 45 46# Debugging for use in -current 47options DEADLKRES 48options INVARIANTS 49options INVARIANT_SUPPORT 50options WITNESS 51options WITNESS_SKIPSPIN 52options FFS #Berkeley Fast Filesystem 53#options SOFTUPDATES #Enable FFS soft updates support 54#options UFS_ACL #Support for access control lists 55#options UFS_DIRHASH #Improve performance on big directories 56 57# Support uncompress lzma rootfs 58device xz 59options GEOM_UZIP 60options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\" 61 62# PCI bus 63device pci 64device ar724x_pci 65 66# NVRAM U-Boot Environment -> Kernel environment 67device nvram2env 68 69# Wireless NIC cards 70options IEEE80211_DEBUG 71options IEEE80211_SUPPORT_MESH 72options IEEE80211_SUPPORT_TDMA 73options IEEE80211_ALQ 74#device wlan # 802.11 support 75#device wlan_wep # 802.11 WEP support 76#device wlan_ccmp # 802.11 CCMP support 77#device wlan_tkip # 802.11 TKIP support 78#device wlan_xauth # 802.11 hostap support 79 80#device ath # Atheros pci/cardbus NIC's 81#device ath_pci # PCI/PCIe bus glue 82options ATH_DEBUG 83options ATH_ENABLE_11N 84options ATH_DIAGAPI 85 86# device ath_hal 87options AH_SUPPORT_AR5416 88options AH_DEBUG 89options AH_DEBUG_ALQ 90 91# device ath_rate_sample 92 93device mii 94device arge 95 96# USB devices - PB92 has EHCI only 97 98#device usb 99options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order 100options USB_DEBUG 101options USB_HOST_ALIGN=32 102#device ehci 103 104# Mass storage 105#device scbus 106#device umass 107#device da 108 109# Read MSDOS formatted disks 110# options MSDOSFS 111 112# GPIO Bus 113#device gpio 114#device gpioled 115 116# SPI and flash 117device spibus 118device ar71xx_spi 119device mx25l 120 121# The flash is statically partitioned; add in that 122device geom_map 123 124device ar71xx_wdog 125 126# Serial 127device uart 128device uart_ar71xx 129 130device ar71xx_apb 131 132# Network twiddling 133device loop 134device ether 135#device md 136#device bpf 137#device random 138#device if_bridge 139