1# $FreeBSD$ 2# 3# Specific board setup for the D-Link DIR-825C1 router. 4# 5# The DIR-825C1 has the following hardware: 6# 7# + AR9344 CPU SoC 74k MIPS 8# + ARxxx 2.4GHz 11n 9# + ARXXX 5GHz 11n 10# + AR8327 Gigabit switch 11# + m25p80 based 16MB flash 12# + 128MB RAM 13# + uboot environment 14 15#NO_UNIVERSE 16 17# Include the default AR934x parameters 18include "std.AR934X" 19ident DIR825C1 20 21# Override hints with board values 22hints "DIR-825C1.hints" 23 24# Force the board memory - the base DB120 has 128MB RAM 25options AR71XX_REALMEM=(128*1024*1024) 26 27# Options required for miiproxy and mdiobus 28options ARGE_MDIO # Export an MDIO bus separate from arge 29device miiproxy # MDIO bus <-> MII PHY rendezvous 30 31device etherswitch 32device arswitch 33 34# read MSDOS formatted disks - USB 35options MSDOSFS 36 37# Enable the uboot environment stuff rather then the 38# redboot stuff. 39options AR71XX_ENV_UBOOT 40 41# Used for the static uboot partition map 42device geom_map 43 44# uzip - to boot natively from flash 45options GEOM_UZIP 46options GEOM_PART_GPT 47 48# yes, this board has a PCI connected atheros device 49options AR71XX_ATH_EEPROM 50device firmware # Used by the above 51options ATH_EEPROM_FIRMWARE 52 53# Boot off of the rootfs, as defined in the geom_map setup. 54options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" 55 56# In order to netboot, you have to build the mfsroot into the kernel 57# 19443712 or 19M is the biggest rootfs via netboot this thing supports 58#options MD_ROOT # md device usable as a potential root device 59#options MD_ROOT_SIZE=19444 60#makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma 61#options ROOTDEVNAME=\"ufs:md0.uzip\" 62