Update Wasmtime to the 2024 Rust Edition (#10806)

* Update Wasmtime to the 2024 Rust Edition

Now that our MSRV supports the 2024 edition it's possible to make this
switch. This commit moves Wasmtim

Update Wasmtime to the 2024 Rust Edition (#10806)

* Update Wasmtime to the 2024 Rust Edition

Now that our MSRV supports the 2024 edition it's possible to make this
switch. This commit moves Wasmtime to the 2024 Edition to keep
up-to-date with Rust idioms and access many of the edition features
exclusive to the 2024 edition.

prtest:full

* Reformat with the 2024 edition

show more ...

Enable `unsafe-attr-outside-unsafe` 2024 edition lint (#9964)

* Enable `unsafe-attr-outside-unsafe` 2024 edition lint

This commit enables the `unsafe-attr-outside-unsafe` lint in rustc used
in tran

Enable `unsafe-attr-outside-unsafe` 2024 edition lint (#9964)

* Enable `unsafe-attr-outside-unsafe` 2024 edition lint

This commit enables the `unsafe-attr-outside-unsafe` lint in rustc used
in transitioning to the 2024 edition. This requires that the
`#[no_mangle]` attribute is replaced in favor of `#[unsafe(no_mangle)]`.
This mostly affects the C API of wasmtime and most of the changes here
are a simple search/replace.

* Another attribute update

* Fix command adapter build

show more ...

Leverage Rust 1.79, 1.80 (#9498)

This commit is a follow-up to #9496 to leverage various APIs that the
workspace now has access to. For example most dependencies on the
`once_cell` crate are now rem

Leverage Rust 1.79, 1.80 (#9498)

This commit is a follow-up to #9496 to leverage various APIs that the
workspace now has access to. For example most dependencies on the
`once_cell` crate are now removed in favor of the types stabilized in
the standard library: `LazyLock` and `LazyCell`. One dependency remains
in the `wasmtime` crate due to the `get_or_try_init` not being stable
yet.

Some additional helper methods on raw pointer slices are also available
for removing a few minor `unsafe` blocks.

show more ...

Implement the table64 extension to the memory64 proposal (#9206)

This commit implements the table64 extention in both Wasmtime and
Cranelift.

Most of the work was changing a bunch of u32 values to

Implement the table64 extension to the memory64 proposal (#9206)

This commit implements the table64 extention in both Wasmtime and
Cranelift.

Most of the work was changing a bunch of u32 values to u64/usize.
The decisions were made in align with the PR #3153 which
implemented the memory64 propsal itself.

One significant change was the introduction of `IndexType`
and `Limits` which streamline and unify the handling of limits
for both memories and tables.

The spec and fuzzing tests related to table64 are re-enabled which
provides a good coverage of the feature.

show more ...

Wasmtime: Finish support for the typed function references proposal (#7943)

* Wasmtime: Finish support for the typed function references proposal

While we supported the function references proposal

Wasmtime: Finish support for the typed function references proposal (#7943)

* Wasmtime: Finish support for the typed function references proposal

While we supported the function references proposal inside Wasm, we didn't
support it on the "outside" in the Wasmtime embedder APIs. So much of the work
here is exposing typed function references, and their type system updates, in
the embedder API. These changes include:

* `ValType::FuncRef` and `ValType::ExternRef` are gone, replaced with the
introduction of the `RefType` and `HeapType` types and a
`ValType::Ref(RefType)` variant.

* `ValType` and `FuncType` no longer implement `Eq` and `PartialEq`. Instead
there are `ValType::matches` and `FuncType::matches` methods which check
directional subtyping. I also added `ValType::eq` and `FuncType::eq` static
methods for the rare case where someone needs to check precise equality, but
that is almost never actually the case, 99.99% of the time you want to check
subtyping.

* There are also public `Val::matches_ty` predicates for checking if a value is
an instance of a type, as well as internal helpers like
`Val::ensure_matches_ty` that return a formatted error if the value does not
match the given type. These helpers are used throughout Wasmtime internals
now.

* There is now a dedicated `wasmtime::Ref` type that represents reference
values. Table operations have been updated to take and return `Ref`s rather
than `Val`s.

Furthermore, this commit also includes type registry changes to correctly manage
lifetimes of types that reference other types. This wasn't previously an issue
because the only thing that could reference types that reference other types was
a Wasm module that added all the types that could reference each other at the
same time and removed them all at the same time. But now that the previously
discussed work to expose these things in the embedder API is done, type lifetime
management in the registry becomes a little trickier because the embedder might
grab a reference to a type that references another type, and then unload the
Wasm module that originally defined that type, but then the user should still be
able use that type and the other types it transtively references. Before, we
were refcounting individual registry entries. Now, we still are refcounting
individual entries, but now we are also accounting for type-to-type references
and adding a new type to the registry will increment the refcounts of each of
the types that it references, and removing a type from the registry will
decrement the refcounts of each of the types it references, and then recursively
(logically, not literally) remove any types whose refcount has now reached zero.

Additionally, this PR adds support for subtyping to `Func::typed`- and
`Func::wrap`-style APIs. For result types, you can always use a supertype of the
WebAssembly function's actual declared return type in `Func::typed`. And for
param types, you can always use a subtype of the Wasm function's actual declared
param type. Doing these things essentially erases information but is always
correct. But additionally, for functions which take a reference to a concrete
type as a parameter, you can also use the concrete type's supertype. Consider a
WebAssembly function that takes a reference to a function with a concrete type:
`(ref null <func type index>)`. In this scenario, there is no static
`wasmtime::Foo` Rust type that corresponds to that particular Wasm-defined
concrete reference type because Wasm modules are loaded dynamically at
runtime. You *could* do `f.typed::<Option<NoFunc>, ()>()`, and while that is
correctly typed and valid, it is often overly restrictive. The only value you
could call the resulting typed function with is the null function reference, but
we'd like to call it with non-null function references that happen to be of the
correct type. Therefore, `f.typed<Option<Func>, ()>()` is also allowed in this
case, even though `Option<Func>` represents `(ref null func)` which is the
supertype, not subtype, of `(ref null <func type index>)`. This does imply some
minimal dynamic type checks in this case, but it is supported for better
ergonomics, to enable passing non-null references into the function.

We can investigate whether it is possible to use generic type parameters and
combinators to define Rust types that precisely match concrete reference types
in future, follow-up pull requests. But for now, we've made things usable, at
least.

Finally, this also takes the first baby step towards adding support for the Wasm
GC proposal. Right now the only thing that is supported is `nofunc` references,
and this was mainly to make testing function reference subtyping easier. But
that does mean that supporting `nofunc` references entailed also adding a
`wasmtime::NoFunc` type as well as the `Config::wasm_gc(enabled)` knob. So we
officially have an in-progress implementation of Wasm GC in Wasmtime after this
PR lands!

Fixes https://github.com/bytecodealliance/wasmtime/issues/6455

* Fix WAT in test to be valid

* Check that dependent features are enabled for function-references and GC

* Remove unnecessary engine parameters from a few methods

Ever since `FuncType`'s internal `RegisteredType` holds onto its own `Engine`,
we don't need these anymore.

Still useful to keep the `Engine` parameter around for the `ensure_matches`
methods because that can be used to check correct store/engine usage for
embedders.

* Add missing dependent feature enabling for some tests

* Remove copy-paste bit from test

* match self to show it is uninhabited

* Add a missing `is_v128` method

* Short circuit a few func type comparisons

* Turn comment into part of doc comment

* Add test for `Global::new` and subtyping

* Add tests for embedder API, tables, and subtyping

* Add an embedder API test for setting globals and subtyping

* Construct realloc's type from its index, rather than from scratch

* Help LLVM better optimize our dynamic type checks in `TypedFunc::call_raw`

* Fix call benchmark compilation

* Change `WasmParams::into_abi` to take the whole func type instead of iter of params

* Fix doc links

prtest:full

* Fix size assertion on s390x

show more ...

Refactor `wasmtime::FuncType` to hold a handle to its registered type (#7892)

* Refactor `wasmtime::FuncType` to hold a handle to its registered type

Rather than holding a copy of the type directly

Refactor `wasmtime::FuncType` to hold a handle to its registered type (#7892)

* Refactor `wasmtime::FuncType` to hold a handle to its registered type

Rather than holding a copy of the type directly, it now holds a `RegisteredType`
which internally is

* A `VMSharedTypeIndex` pointing into the engine's types registry.
* An `Arc` handle to the engine's type registry.
* An `Arc` handle to the actual type.

The last exists only to keep it so that accessing a `wasmtime::FuncType`'s
parameters and results fast, avoiding any new locking on call hot paths.

This is helping set the stage for further types and `TypeRegistry` refactors
needed for Wasm GC.

* Update the C API for the function types refactor

prtest:full

* rustfmt

* Fix benches build

show more ...

Implement the memory64 proposal in Wasmtime (#3153)

* Implement the memory64 proposal in Wasmtime

This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranel

Implement the memory64 proposal in Wasmtime (#3153)

* Implement the memory64 proposal in Wasmtime

This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.

A number of internal and public interfaces are changing as a result of
this commit, for example:

* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.

* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.

* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.

* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.

* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.

Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.

In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:

* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.

* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.

The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.

[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md

* Fix some tests

* More test fixes

* Fix wasmtime tests

* Fix doctests

* Revert to 32-bit immediate offsets in `heap_addr`

This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.

* Disable memory64 for spectest fuzzing

* Fix wrong offset being added to heap addr

* More comments!

* Clarify bytes/pages

show more ...

Refactor and fill out wasmtime's C API (#1415)

* Refactor and improve safety of C API

This commit is intended to be a relatively large refactoring of the C
API which is targeted at improving the

Refactor and fill out wasmtime's C API (#1415)

* Refactor and improve safety of C API

This commit is intended to be a relatively large refactoring of the C
API which is targeted at improving the safety of our C API definitions.
Not all of the APIs have been updated yet but this is intended to be the
start.

The goal here is to make as many functions safe as we can, expressing
inputs/outputs as native Rust types rather than raw pointers wherever
possible. For example instead of `*const wasm_foo_t` we'd take
`&wasm_foo_t`. Instead of returning `*mut wasm_foo_t` we'd return
`Box<wasm_foo_t>`. No ABI/API changes are intended from this commit,
it's supposed to only change how we define all these functions
internally.

This commit also additionally implements a few more API bindings for
exposed vector types by unifying everything into one macro.

Finally, this commit moves many internal caches in the C API to the
`OnceCell` type which provides a safe interface for one-time
initialization.

* Split apart monolithic C API `lib.rs`

This commit splits the monolithic `src/lib.rs` in the C API crate into
lots of smaller files. The goal here is to make this a bit more readable
and digestable. Each module now contains only API bindings for a
particular type, roughly organized around the grouping in the wasm.h
header file already.

A few more extensions were added, such as filling out `*_as_*`
conversions with both const and non-const versions. Additionally many
APIs were made safer in the same style as the previous commit, generally
preferring Rust types rather than raw pointer types.

Overall no functional change is intended here, it should be mostly just
code movement and minor refactorings!

* Make a few wasi C bindings safer

Use safe Rust types where we can and touch up a few APIs here and there.

* Implement `wasm_*type_as_externtype*` APIs

This commit restructures `wasm_externtype_t` to be similar to
`wasm_extern_t` so type conversion between the `*_extern_*` variants to
the concrete variants are all simple casts. (checked in the case of
general to concrete, of course).

* Consistently imlpement host info functions in the API

This commit adds a small macro crate which is then used to consistently
define the various host-info-related functions in the C API. The goal
here is to try to mirror what the `wasm.h` header provides to provide a
full implementation of the header.

show more ...