cranelift-codegen: rename most uses of std to core and alloc (#12237)

* rename most std uses to core and alloc

* cargo fmt

Update nightly used in CI (#10957)

A new lint was added to rustc so this updates the nightly used in CI and
then additionally fixes the lints that are firing.

Update Wasmtime to the 2024 Rust Edition (#10806)

* Update Wasmtime to the 2024 Rust Edition

Now that our MSRV supports the 2024 edition it's possible to make this
switch. This commit moves Wasmtim

Update Wasmtime to the 2024 Rust Edition (#10806)

* Update Wasmtime to the 2024 Rust Edition

Now that our MSRV supports the 2024 edition it's possible to make this
switch. This commit moves Wasmtime to the 2024 Edition to keep
up-to-date with Rust idioms and access many of the edition features
exclusive to the 2024 edition.

prtest:full

* Reformat with the 2024 edition

show more ...

Cranelift: initial try_call / try_call_indirect (exception) support. (#10510)

* Cranelift: initial try_call / try_call_indirect (exception) support.

This PR adds `try_call` and `try_call_indirect`

Cranelift: initial try_call / try_call_indirect (exception) support. (#10510)

* Cranelift: initial try_call / try_call_indirect (exception) support.

This PR adds `try_call` and `try_call_indirect` instructions, and
lowerings on four of five ISAs (x86-64, aarch64, riscv64, pulley; s390x
has its own non-shared ABI code that will need separate work).

It extends CLIF to support these instructions as new kinds of branches,
and extends block-calls to accept `retN` and `exnN` block-call args that
carry the normal return values or exception payloads (respectively) into
the appropriate successor blocks.

It wires up the "normal return path" so that it continues to work.
It updates the ABI so that unwinding is possible without an initial
register state at throw: specifically, as per our RFC, all registers are
clobbered. It also includes metadata in the `MachBuffer` that describes
exception-catch destinations. However, no unwinder exists to interpret
these catch-destinations yet, so they are untested.

* Add try_call_indirect lowering as well.

show more ...

Couple of small improvements for debugging Cranelift (#8885)

* Print block params and branch args in vcode

* Implement Debug for JumpTableData and GlobalValueData

Decouple `serde` from its `derive` crate (#6917)

By not activating the `derive` feature on `serde`, the compilation speed
can be improved by a lot. This is because `serde` can then compile in
parall

Decouple `serde` from its `derive` crate (#6917)

By not activating the `derive` feature on `serde`, the compilation speed
can be improved by a lot. This is because `serde` can then compile in
parallel to `serde_derive`, allowing it to finish compilation possibly
even before `serde_derive`, unblocking all the crates waiting for
`serde` to start compiling much sooner.

As it turns out the main deciding factor for how long the compile time of a
project is, is primarly determined by the depth of dependencies rather
than the width. In other words, a crate's compile times aren't affected
by how many crates it depends on, but rather by the longest chain of
dependencies that it needs to wait on. In many cases `serde` is part of
that long chain, as it is part of a long chain if the `derive` feature
is active:

`proc-macro2` compile build script > `proc-macro2` run build script >
`proc-macro2` > `quote` > `syn` > `serde_derive` > `serde` >
`serde_json` (or any crate that depends on serde)

By decoupling it from `serde_derive`, the chain is shortened and compile
times get much better.

Check this issue for a deeper elaboration:
https://github.com/serde-rs/serde/issues/2584

For `wasmtime` I'm seeing a reduction from 24.75s to 22.45s when
compiling in `release` mode. This is because wasmtime through `gimli`
has a dependency on `indexmap` which can only start compiling when
`serde` is finished, which you want to happen as early as possible so
some of wasmtime's dependencies can start compiling.

To measure the full effect, the dependencies can't by themselves
activate the `derive` feature. I've upstreamed a patch for
`fxprof-processed-profile` which was the only dependency that activated
it for `wasmtime` (not yet published to crates.io). `wasmtime-cli` and
co. may need patches for their dependencies to see a similar
improvement.

show more ...

Minir typo/Grammar fixes (#6187)

* fix typo

* add test to check that Option<EntityRef> is twice as large as EntityRef

* grammar

* grammar

* reverse snakecase -- Not sure if folks want this type

Minir typo/Grammar fixes (#6187)

* fix typo

* add test to check that Option<EntityRef> is twice as large as EntityRef

* grammar

* grammar

* reverse snakecase -- Not sure if folks want this type of change

show more ...

Rework br_table to use BlockCall (#5731)

Rework br_table to use BlockCall, allowing us to avoid adding new nodes during ssa construction to hold block arguments. Additionally, many places where we p

Rework br_table to use BlockCall (#5731)

Rework br_table to use BlockCall, allowing us to avoid adding new nodes during ssa construction to hold block arguments. Additionally, many places where we previously matched on InstructionData to extract branch destinations can be replaced with a use of branch_destination or branch_destination_mut.

show more ...

Move the default block to the front of the underlying jump table storage (#5770)

The new api on JumpTableData makese it easy to keep the default label first, and that shrinks the diff in #5731 a bit.

Move default blocks into jump tables (#5756)

Move the default block off of the br_table instrution, and into the JumpTable that it references.

Inline jump tables in parsed br_table instructions (#5755)

As jump tables are used by at most one br_table instruction, inline their definition in those instructions instead of requiring them to be

Inline jump tables in parsed br_table instructions (#5755)

As jump tables are used by at most one br_table instruction, inline their definition in those instructions instead of requiring them to be declared as function-level metadata.

show more ...

fuzzgen: Always generate reachable blocks (#5034)

* fuzzgen: Always reachable blocks

* fuzzgen: Rename BlockTerminator

* fuzzgen: Rename `finalize_block`

* fuzzgen: Use `cloned` instead of

fuzzgen: Always generate reachable blocks (#5034)

* fuzzgen: Always reachable blocks

* fuzzgen: Rename BlockTerminator

* fuzzgen: Rename `finalize_block`

* fuzzgen: Use `cloned` instead of map clone

Thanks @jameysharp!

Co-authored-by: Jamey Sharp <[email protected]>

* fuzzgen: `rustfmt`

* fuzzgen: Document paramless targets

* fuzzgen: Add `BlockTerminatorKind`

* fuzzen: Update BrTable/Switch comment

* fuzzgen: Minor cleanup

Co-authored-by: Jamey Sharp <[email protected]>

show more ...

Implement an incremental compilation cache for Cranelift (#4551)

This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested b

Implement an incremental compilation cache for Cranelift (#4551)

This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested by @cfallin (thanks!) in Cranelift, and trait object to provide a backend for an all-included experience in Wasmtime.

After the suggestion of Chris, `Function` has been split into mostly two parts:

- on the one hand, `FunctionStencil` contains all the fields required during compilation, and that act as a compilation cache key: if two function stencils are the same, then the result of their compilation (`CompiledCodeBase<Stencil>`) will be the same. This makes caching trivial, as the only thing to cache is the `FunctionStencil`.
- on the other hand, `FunctionParameters` contain the... function parameters that are required to finalize the result of compilation into a `CompiledCode` (aka `CompiledCodeBase<Final>`) with proper final relocations etc., by applying fixups and so on.

Most changes are here to accomodate those requirements, in particular that `FunctionStencil` should be `Hash`able to be used as a key in the cache:

- most source locations are now relative to a base source location in the function, and as such they're encoded as `RelSourceLoc` in the `FunctionStencil`. This required changes so that there's no need to explicitly mark a `SourceLoc` as the base source location, it's automatically detected instead the first time a non-default `SourceLoc` is set.
- user-defined external names in the `FunctionStencil` (aka before this patch `ExternalName::User { namespace, index }`) are now references into an external table of `UserExternalNameRef -> UserExternalName`, present in the `FunctionParameters`, and must be explicitly declared using `Function::declare_imported_user_function`.
- some refactorings have been made for function names:
- `ExternalName` was used as the type for a `Function`'s name; while it thus allowed `ExternalName::Libcall` in this place, this would have been quite confusing to use it there. Instead, a new enum `UserFuncName` is introduced for this name, that's either a user-defined function name (the above `UserExternalName`) or a test case name.
- The future of `ExternalName` is likely to become a full reference into the `FunctionParameters`'s mapping, instead of being "either a handle for user-defined external names, or the thing itself for other variants". I'm running out of time to do this, and this is not trivial as it implies touching ISLE which I'm less familiar with.

The cache computes a sha256 hash of the `FunctionStencil`, and uses this as the cache key. No equality check (using `PartialEq`) is performed in addition to the hash being the same, as we hope that this is sufficient data to avoid collisions.

A basic fuzz target has been introduced that tries to do the bare minimum:

- check that a function successfully compiled and cached will be also successfully reloaded from the cache, and returns the exact same function.
- check that a trivial modification in the external mapping of `UserExternalNameRef -> UserExternalName` hits the cache, and that other modifications don't hit the cache.
- This last check is less efficient and less likely to happen, so probably should be rethought a bit.

Thanks to both @alexcrichton and @cfallin for your very useful feedback on Zulip.

Some numbers show that for a large wasm module we're using internally, this is a 20% compile-time speedup, because so many `FunctionStencil`s are the same, even within a single module. For a group of modules that have a lot of code in common, we get hit rates up to 70% when they're used together. When a single function changes in a wasm module, every other function is reloaded; that's still slower than I expect (between 10% and 50% of the overall compile time), so there's likely room for improvement.

Fixes #4155.

show more ...

Fix bad jumptable block ref when DCE removes a block.

When a block is unreachable, the `unreachable_code` pass will remove it,
which is perfectly sensible. Jump tables factor into unreachability in

Fix bad jumptable block ref when DCE removes a block.

When a block is unreachable, the `unreachable_code` pass will remove it,
which is perfectly sensible. Jump tables factor into unreachability in
an expected way: even if a block is listed in a jump table, the block
might be unreachable if the jump table itself is unused (or used in an
unreachable block). Unfortunately, the verifier still expects all
block refs in all jump tables to be valid, even after DCE, which will
not always be the case.

This makes a simple change to the pass: after removing blocks, it scans
jump tables. Any jump table that refers to an unreachable block must
itself be unused, and so we just clear its entries. We do not bother
removing it (and renumbering all later jumptables), and we do not bother
computing full unused-ness of all jumptables, as that would be more
expensive; it's sufficient to clear out the ones that refer to
unreachable blocks, which are a subset of all unused jumptables.

Fixes #2670.

show more ...

Add serde serialization support for the full clif ir

Mass rename Ebb and relatives to Block (#1365)

* Manually rename BasicBlock to BlockPredecessor

BasicBlock is a pair of (Ebb, Inst) that is used to represent the
basic block subcomponent of an E

Mass rename Ebb and relatives to Block (#1365)

* Manually rename BasicBlock to BlockPredecessor

BasicBlock is a pair of (Ebb, Inst) that is used to represent the
basic block subcomponent of an Ebb that is a predecessor to an Ebb.

Eventually we will be able to remove this struct, but for now it
makes sense to give it a non-conflicting name so that we can start
to transition Ebb to represent a basic block.

I have not updated any comments that refer to BasicBlock, as
eventually we will remove BlockPredecessor and replace with Block,
which is a basic block, so the comments will become correct.

* Manually rename SSABuilder block types to avoid conflict

SSABuilder has its own Block and BlockData types. These along with
associated identifier will cause conflicts in a later commit, so
they are renamed to be more verbose here.

* Automatically rename 'Ebb' to 'Block' in *.rs

* Automatically rename 'EBB' to 'block' in *.rs

* Automatically rename 'ebb' to 'block' in *.rs

* Automatically rename 'extended basic block' to 'basic block' in *.rs

* Automatically rename 'an basic block' to 'a basic block' in *.rs

* Manually update comment for `Block`

`Block`'s wikipedia article required an update.

* Automatically rename 'an `Block`' to 'a `Block`' in *.rs

* Automatically rename 'extended_basic_block' to 'basic_block' in *.rs

* Automatically rename 'ebb' to 'block' in *.clif

* Manually rename clif constant that contains 'ebb' as substring to avoid conflict

* Automatically rename filecheck uses of 'EBB' to 'BB'

'regex: EBB' -> 'regex: BB'
'$EBB' -> '$BB'

* Automatically rename 'EBB' 'Ebb' to 'block' in *.clif

* Automatically rename 'an block' to 'a block' in *.clif

* Fix broken testcase when function name length increases

Test function names are limited to 16 characters. This causes
the new longer name to be truncated and fail a filecheck test. An
outdated comment was also fixed.

show more ...

Fix jump table comment grammar (#1259)

Rustfmt

Always use extern crate std in cranelift-codegen

moved crates in lib/ to src/, renamed crates, modified some files' text (#660)

moved crates in lib/ to src/, renamed crates, modified some files' text (#660)