[mlir] move SCF headers to SCF/{IR,Transforms} respectively

This aligns the SCF dialect file layout with the majority of the dialects.

Reviewed By: jpienaar

Differential Revision: https://reviews.

[mlir] move SCF headers to SCF/{IR,Transforms} respectively

This aligns the SCF dialect file layout with the majority of the dialects.

Reviewed By: jpienaar

Differential Revision: https://reviews.llvm.org/D128049

show more ...

[mlir] Split out a new ControlFlow dialect from Standard

This dialect is intended to model lower level/branch based control-flow constructs. The initial set
of operations are: AssertOp, BranchOp, Co

[mlir] Split out a new ControlFlow dialect from Standard

This dialect is intended to model lower level/branch based control-flow constructs. The initial set
of operations are: AssertOp, BranchOp, CondBranchOp, SwitchOp; all split out from the current
standard dialect.

See https://discourse.llvm.org/t/standard-dialect-the-final-chapter/6061

Differential Revision: https://reviews.llvm.org/D118966

show more ...

[mlir][linalg] Replace LinalgOps.h and LinalgTypes.h by a single header.

After removing the range type, Linalg does not define any type. The revision thus consolidates the LinalgOps.h and LinalgType

[mlir][linalg] Replace LinalgOps.h and LinalgTypes.h by a single header.

After removing the range type, Linalg does not define any type. The revision thus consolidates the LinalgOps.h and LinalgTypes.h into a single Linalg.h header. Additionally, LinalgTypes.cpp is renamed to LinalgDialect.cpp to follow the convention adopted by other dialects such as the tensor dialect.

Depends On D115727

Reviewed By: nicolasvasilache

Differential Revision: https://reviews.llvm.org/D115728

show more ...

[mlir][linalg] Remove RangeOp and RangeType.

Remove the RangeOp and the RangeType that are not actively used anymore. After removing RangeType, the LinalgTypes header only includes the generated dia

[mlir][linalg] Remove RangeOp and RangeType.

Remove the RangeOp and the RangeType that are not actively used anymore. After removing RangeType, the LinalgTypes header only includes the generated dialect header.

Reviewed By: nicolasvasilache

Differential Revision: https://reviews.llvm.org/D115727

show more ...

[mlir:OpConversion] Remove the remaing usages of the deprecated matchAndRewrite methods

This commits updates the remaining usages of the ArrayRef<Value> based
matchAndRewrite/rewrite methods in favo

[mlir:OpConversion] Remove the remaing usages of the deprecated matchAndRewrite methods

This commits updates the remaining usages of the ArrayRef<Value> based
matchAndRewrite/rewrite methods in favor of the new OpAdaptor
overload.

Differential Revision: https://reviews.llvm.org/D110360

show more ...

[mlir] replace llvm.mlir.cast with unrealized_conversion_cast

The dialect-specific cast between builtin (ex-standard) types and LLVM
dialect types was introduced long time before built-in support fo

[mlir] replace llvm.mlir.cast with unrealized_conversion_cast

The dialect-specific cast between builtin (ex-standard) types and LLVM
dialect types was introduced long time before built-in support for
unrealized_conversion_cast. It has a similar purpose, but is restricted
to compatible builtin and LLVM dialect types, which may hamper
progressive lowering and composition with types from other dialects.
Replace llvm.mlir.cast with unrealized_conversion_cast, and drop the
operation that became unnecessary.

Also make unrealized_conversion_cast legal by default in
LLVMConversionTarget as the majority of convesions using it are partial
conversions that actually want the casts to persist in the IR. The
standard-to-llvm conversion, which is still expected to run last, cleans
up the remaining casts standard-to-llvm conversion, which is still
expected to run last, cleans up the remaining casts

Reviewed By: nicolasvasilache

Differential Revision: https://reviews.llvm.org/D105880

show more ...

[mlir] Move linalg::Expand/CollapseShapeOp to memref dialect.

RFC: https://llvm.discourse.group/t/rfc-reshape-ops-restructuring/3310

Differential Revision: https://reviews.llvm.org/D106141

[mlir] factor memref-to-llvm lowering out of std-to-llvm

After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is u

[mlir] factor memref-to-llvm lowering out of std-to-llvm

After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.

Reviewed By: herhut, silvas

Differential Revision: https://reviews.llvm.org/D105625

show more ...

[mlir] Split linalg reshape ops into expand/collapse.

Differential Revision: https://reviews.llvm.org/D103548

[mlir][Standard] NFC - Drop remaining EDSC usage

Drop the remaining EDSC subdirectories and update all uses.

Differential Revision: https://reviews.llvm.org/D102911

Define a `NoTerminator` traits that allows operations with a single block region to not provide a terminator

In particular for Graph Regions, the terminator needs is just a
historical artifact of th

Define a `NoTerminator` traits that allows operations with a single block region to not provide a terminator

In particular for Graph Regions, the terminator needs is just a
historical artifact of the generalization of MLIR from CFG region.
Operations like Module don't need a terminator, and before Module
migrated to be an operation with region there wasn't any needed.

To validate the feature, the ModuleOp is migrated to use this trait and
the ModuleTerminator operation is deleted.

This patch is likely to break clients, if you're in this case:

- you may iterate on a ModuleOp with `getBody()->without_terminator()`,
the solution is simple: just remove the ->without_terminator!
- you created a builder with `Builder::atBlockTerminator(module_body)`,
just use `Builder::atBlockEnd(module_body)` instead.
- you were handling ModuleTerminator: it isn't needed anymore.
- for generic code, a `Block::mayNotHaveTerminator()` may be used.

Differential Revision: https://reviews.llvm.org/D98468

show more ...

[PatternMatch] Big mechanical rename OwningRewritePatternList -> RewritePatternSet and insert -> add. NFC

This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use t

[PatternMatch] Big mechanical rename OwningRewritePatternList -> RewritePatternSet and insert -> add. NFC

This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use the new preferred names. We'll keep the old names around for a
couple weeks to help transitions.

Differential Revision: https://reviews.llvm.org/D99127

show more ...

Change OwningRewritePatternList to carry an MLIRContext with it.

This updates the codebase to pass the context when creating an instance of
OwningRewritePatternList, and starts removing extraneous M

Change OwningRewritePatternList to carry an MLIRContext with it.

This updates the codebase to pass the context when creating an instance of
OwningRewritePatternList, and starts removing extraneous MLIRContext
parameters. There are many many more to be removed.

Differential Revision: https://reviews.llvm.org/D99028

show more ...

[mlir] Turn Linalg to LLVM into a partial conversion

Historically, Linalg To LLVM conversion subsumed numerous other conversions,
including (affine) loop lowerings to CFG and conversions from the St

[mlir] Turn Linalg to LLVM into a partial conversion

Historically, Linalg To LLVM conversion subsumed numerous other conversions,
including (affine) loop lowerings to CFG and conversions from the Standard and
Vector dialects to the LLVM dialect. This was due to the insufficient support
for partial conversions in the infrastructure that essentially required
conversions that involve type change (in this case, !linalg.range to
!llvm.struct) to be performed in a single conversion sweep. This is no longer
the case so remove the subsumed conversions and run them as separate passes
when necessary.

Depends On D95317

Reviewed By: nicolasvasilache

Differential Revision: https://reviews.llvm.org/D96008

show more ...

[mlir][Linalg] Drop SliceOp

This op is subsumed by rank-reducing SubViewOp and has become useless.

Differential revision: https://reviews.llvm.org/D95317

[mlir] Remove LLVMType, LLVM dialect types now derive Type directly

BEGIN_PUBLIC
[mlir] Remove LLVMType, LLVM dialect types now derive Type directly

This class has become a simple `isa` hook with n

[mlir] Remove LLVMType, LLVM dialect types now derive Type directly

BEGIN_PUBLIC
[mlir] Remove LLVMType, LLVM dialect types now derive Type directly

This class has become a simple `isa` hook with no proper functionality.
Removing will allow us to eventually make the LLVM dialect type infrastructure
open, i.e., support non-LLVM types inside container types, which itself will
make the type conversion more progressive.

Introduce a call `LLVM::isCompatibleType` to be used instead of
`isa<LLVMType>`. For now, this is strictly equivalent.
END_PUBLIC

Depends On D93681

Reviewed By: mehdi_amini

Differential Revision: https://reviews.llvm.org/D93713

show more ...

[mlir] Remove static constructors from LLVMType

LLVMType contains numerous static constructors that were initially introduced
for API compatibility with LLVM. Most of these merely forward to argumen

[mlir] Remove static constructors from LLVMType

LLVMType contains numerous static constructors that were initially introduced
for API compatibility with LLVM. Most of these merely forward to arguments to
`SpecificType::get` (MLIR defines classes for all types, unlike LLVM IR), while
some introduce subtle semantics differences due to different modeling of MLIR
types (e.g., structs are not auto-renamed in case of conflicts). Furthermore,
these constructors don't match MLIR idioms and actively prevent us from making
the LLVM dialect type system more open. Remove them and use `SpecificType::get`
instead.

Depends On D93680

Reviewed By: mehdi_amini

Differential Revision: https://reviews.llvm.org/D93681

show more ...

[mlir][IR][NFC] Move context/location parameters of builtin Type::get methods to the start of the parameter list

This better matches the rest of the infrastructure, is much simpler, and makes it eas

[mlir][IR][NFC] Move context/location parameters of builtin Type::get methods to the start of the parameter list

This better matches the rest of the infrastructure, is much simpler, and makes it easier to move these types to being declaratively specified.

Differential Revision: https://reviews.llvm.org/D93432

show more ...

[NFC] Use ConvertOpToLLVMPattern instead of ConvertToLLVMPattern.

- use ConvertOpToLLVMPattern to avoid explicit casting and in most cases the
constructor can be reused to save a few lines of code

[NFC] Use ConvertOpToLLVMPattern instead of ConvertToLLVMPattern.

- use ConvertOpToLLVMPattern to avoid explicit casting and in most cases the
constructor can be reused to save a few lines of code.

Differential Revision: https://reviews.llvm.org/D92989

show more ...

Remove typeConverter from ConvertToLLVMPattern and use the existing one in ConversionPattern.

ftynse

Reviewed By: ftynse

Differential Revision: https://reviews.llvm.org/D92564

[mlir][Types][NFC] Move all of the builtin Type classes to BuiltinTypes.h

This is part of a larger refactoring the better congregates the builtin structures under the BuiltinDialect. This also remov

[mlir][Types][NFC] Move all of the builtin Type classes to BuiltinTypes.h

This is part of a larger refactoring the better congregates the builtin structures under the BuiltinDialect. This also removes the problematic "standard" naming that clashes with the "standard" dialect, which is not defined within IR/. A temporary forward is placed in StandardTypes.h to allow time for downstream users to replaced references.

Differential Revision: https://reviews.llvm.org/D92435

show more ...

[mlir][BuiltinDialect] Resolve comments from D91571

* Move ops to a BuiltinOps.h
* Add file comments

[mlir][NFC] Remove references to Module.h and Function.h

These includes have been deprecated in favor of BuiltinDialect.h, which contains the definitions of ModuleOp and FuncOp.

Differential Revisi

[mlir][NFC] Remove references to Module.h and Function.h

These includes have been deprecated in favor of BuiltinDialect.h, which contains the definitions of ModuleOp and FuncOp.

Differential Revision: https://reviews.llvm.org/D91572

show more ...

[mlir][Pattern] Add a new FrozenRewritePatternList class

This class represents a rewrite pattern list that has been frozen, and thus immutable. This replaces the uses of OwningRewritePatternList in

[mlir][Pattern] Add a new FrozenRewritePatternList class

This class represents a rewrite pattern list that has been frozen, and thus immutable. This replaces the uses of OwningRewritePatternList in pattern driver related API, such as dialect conversion. When PDL becomes more prevalent, this API will allow for optimizing a set of patterns once without the need to do this per run of a pass.

Differential Revision: https://reviews.llvm.org/D89104

show more ...

Promote transpose from linalg to standard dialect

While affine maps are part of the builtin memref type, there is very
limited support for manipulating them in the standard dialect. Add
transpose to

Promote transpose from linalg to standard dialect

While affine maps are part of the builtin memref type, there is very
limited support for manipulating them in the standard dialect. Add
transpose to the set of ops to complement the existing view/subview ops.
This is a metadata transformation that encodes the transpose into the
strides of a memref.

I'm planning to use this when lowering operations on strided memrefs,
using the transpose to remove the stride without adding a dependency on
linalg dialect.

Differential Revision: https://reviews.llvm.org/D88651

show more ...