[Local] Do not introduce a new `llvm.trap` before `unreachable`

This is the second attempt to remove the `llvm.trap` insertion after
https://reviews.llvm.org/rGe14e7bc4b889dfaffb7180d176a03311df2d4a

[Local] Do not introduce a new `llvm.trap` before `unreachable`

This is the second attempt to remove the `llvm.trap` insertion after
https://reviews.llvm.org/rGe14e7bc4b889dfaffb7180d176a03311df2d4ae6
reverted the first one. It is not clear what the exact issue was back
then and it might already be gone by now, it has been >5 years after
all.

Replaces D106299.

Differential Revision: https://reviews.llvm.org/D106308

show more ...

[NFCI][SimplifyCFG] Mark all the SimplifyCFG tests that already don't invalidate DomTree as such

First step after e1133179587dd895962a2fe4d6eb0cb1e63b5ee2,
in these tests, DomTree is valid afterward

[NFCI][SimplifyCFG] Mark all the SimplifyCFG tests that already don't invalidate DomTree as such

First step after e1133179587dd895962a2fe4d6eb0cb1e63b5ee2,
in these tests, DomTree is valid afterwards, so mark them as such,
so that they don't regress.

In further steps, SimplifyCFG transforms shall taught to preserve DomTree,
in as small steps as possible.

show more ...

Revert "Temporarily Revert "Add basic loop fusion pass.""

The reversion apparently deleted the test/Transforms directory.

Will be re-reverting again.

llvm-svn: 358552

Revert "[SimplifyCFG] Stop inserting calls to llvm.trap for UB"

This reverts commit r273778, it seems to break UBSan :/

llvm-svn: 273779

[PR27284] Reverse the ownership between DICompileUnit and DISubprogram.

Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICom

[PR27284] Reverse the ownership between DICompileUnit and DISubprogram.

Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.

Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.

Motivation
----------

Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.

We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.

Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.

http://reviews.llvm.org/D19034
<rdar://problem/25256815>

llvm-svn: 266446

show more ...

testcase gardening: update the emissionKind enum to the new syntax. (NFC)

llvm-svn: 265081

Move the DebugEmissionKind enum from DIBuilder into DICompileUnit.

This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for

Move the DebugEmissionKind enum from DIBuilder into DICompileUnit.

This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.

http://reviews.llvm.org/D18612
<rdar://problem/25427165>

llvm-svn: 265077

show more ...

Upgrade some wildly anachronistic debug info in testcases.

llvm-svn: 264797

DI: Reverse direction of subprogram -> function edge.

Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for

DI: Reverse direction of subprogram -> function edge.

Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.

For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.

This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.

Since this is an IR change, a bitcode upgrade has been provided.

Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.

Differential Revision: http://reviews.llvm.org/D14265

llvm-svn: 252219

show more ...

DI: Require subprogram definitions to be distinct

As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a veri

DI: Require subprogram definitions to be distinct

As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.

While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.

I updated almost all the IR with the following script:

git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'

Likely some variant of would work for out-of-tree testcases.

llvm-svn: 246327

show more ...

DI: Disallow uniquable DICompileUnits

Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable

DI: Disallow uniquable DICompileUnits

Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.

Almost all the testcases were updated with this script:

git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'

I imagine something similar should work for out-of-tree testcases.

llvm-svn: 243885

show more ...

IR: Give 'DI' prefix to debug info metadata

Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the

IR: Give 'DI' prefix to debug info metadata

Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.

Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.

Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).

Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.

llvm-svn: 236120

show more ...

DebugInfo: Fix bad debug info for compile units and types

Fix debug info in these tests, which started failing with a WIP patch to
verify compile units and types. The problems look like they were a

DebugInfo: Fix bad debug info for compile units and types

Fix debug info in these tests, which started failing with a WIP patch to
verify compile units and types. The problems look like they were all
caused by bitrot. They fell into these categories:

- Using `!{i32 0}` instead of `!{}`.
- Using `!{null}` instead of `!{}`.
- Using `!MDExpression()` instead of `!{}`.
- Using `!8` instead of `!{!8}`.
- `file:` references that pointed at `MDCompileUnit`s instead of the
same `MDFile` as the compile unit.
- `file:` references that were numerically off-by-one or (off-by-ten).

llvm-svn: 233415

show more ...

DebugInfo: Move new hierarchy into place

Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confiden

DebugInfo: Move new hierarchy into place

Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).

The code changes are fairly mechanical:

- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.

Testcase changes are enormous. There's an accompanying clang commit on
its way.

If you have out-of-tree debug info testcases, I just broke your build.

- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.

This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.

llvm-svn: 231082

show more ...

IR: Move MDLocation into place

This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to

IR: Move MDLocation into place

This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.

This changes the schema for `DebugLoc` and `DILocation` from:

!{i32 3, i32 7, !7, !8}

to:

!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)

Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.

llvm-svn: 226048

show more ...

IR: Make metadata typeless in assembly

Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.

- Only use

IR: Make metadata typeless in assembly

Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.

- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.

- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.

So, assembly like this:

define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}

turns into this:

define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}

I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.

This is part of PR21532.

llvm-svn: 224257

show more ...

Revert "Revert "DI: Fold constant arguments into a single MDString""

This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root caus

Revert "Revert "DI: Fold constant arguments into a single MDString""

This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).

Original commit message follows.

--

This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.

Part of PR17891.

Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.

llvm-svn: 219010

show more ...

Revert "DI: Fold constant arguments into a single MDString"

This reverts commit r218914 while I investigate some bots.

llvm-svn: 218918

DI: Fold constant arguments into a single MDString

This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0`

DI: Fold constant arguments into a single MDString

This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.

Part of PR17891.

Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.

llvm-svn: 218914

show more ...

Debug Info: update testing cases to specify the debug info version number.

We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash wh

Debug Info: update testing cases to specify the debug info version number.

We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.

llvm-svn: 195504

show more ...

Debug Info Testing: updated to use NULL instead of "i32 0" in a few fields.

Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fie

Debug Info Testing: updated to use NULL instead of "i32 0" in a few fields.

Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).

llvm-svn: 190205

show more ...

Debug Info: add an identifier field to DICompositeType.

DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the t

Debug Info: add an identifier field to DICompositeType.

DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.

Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.

Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.

llvm-svn: 189282

show more ...

Debug Info Verifier: verify SPs in llvm.dbg.sp.

Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.

llvm-

Debug Info Verifier: verify SPs in llvm.dbg.sp.

Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.

llvm-svn: 187285

show more ...

Simplify cfg inserts a call to trap when unreachable code is detected. Assign DebugLoc to this new trap instruction.

llvm-svn: 130315