[Scalarizer] Regenerate test checks (NFC)

[NewPM][test] Only use -passes syntax in Scalarizer lit tests

With legacy PM being deprecated it should be enough to verify the
scalarizer pass using the new-PM syntax when invoking opt.

[Scalarizer] Use poison as insertelement's placeholder

This patch makes Scalarizer to use poison as insertelement's placeholder.

It contains two changes in Scalarizer.cpp, and the both changes does

[Scalarizer] Use poison as insertelement's placeholder

This patch makes Scalarizer to use poison as insertelement's placeholder.

It contains two changes in Scalarizer.cpp, and the both changes does not change the semantics of the optimized program.
It is because the placeholder value (poison) is already completely hidden by following insertelement instructions.

The first change at visitBitCastInst() creates poison vector of MidTy and consecutively inserts FanIn times,
which is # of elems of MidTy.
The second change at ScalarizerVisitor::finish() creates poison with Op->getType(), and it is filled with
Count insertelements.

The test diffs show that the poison value is never exposed after insertelements.

Reviewed By: nikic

Differential Revision: https://reviews.llvm.org/D93989

show more ...

[Scalarizer] Avoid updating the name of globals

The "takeName" logic at the end of ScalarizerVisitor::finish
could end up renaming global variables when having simplified
and extractelement instruct

[Scalarizer] Avoid updating the name of globals

The "takeName" logic at the end of ScalarizerVisitor::finish
could end up renaming global variables when having simplified
and extractelement instruction to simply pick a single vector
element. If the input vector to the extractelement instruction
held pointers to global variables we ended up renaming the global
variable.
The patch make sure we only take the name of the replaced Op when
we have added new instructions that might need a useful name.

Reviewed By: lebedev.ri

Differential Revision: https://reviews.llvm.org/D86472

show more ...

[Scalarizer] Centralize instruction DCE

As reported in https://reviews.llvm.org/D83101#2133062
the new visitInsertElementInst()/visitExtractElementInst() functionality
is causing miscompiles (previo

[Scalarizer] Centralize instruction DCE

As reported in https://reviews.llvm.org/D83101#2133062
the new visitInsertElementInst()/visitExtractElementInst() functionality
is causing miscompiles (previously-crashing test added)

It is due to the fact how the infra of Scalarizer is dealing with DCE,
it was not updated or was it ready for such scalar value forwarding.
It always assumed that the moment we "scalarized" something,
it can go away, and did so with prejudice.

But that is no longer safe/okay to do.

Instead, let's prevent it from ever shooting itself into foot,
and let's just accumulate the instructions-to-be-deleted
in a vector, and collectively cleanup (those that are *actually* dead)
them all at the end.

All existing tests are not reporting any new garbage leftovers,
but maybe it's test coverage issue.

show more ...

[Scalarizer] InsertElement handling w/ constant insert index

Summary: As it can be clearly seen from the diff, this results in nicer IR.

Reviewers: jdoerfert, arsenm, bjope, cameron.mcinally

Revie

[Scalarizer] InsertElement handling w/ constant insert index

Summary: As it can be clearly seen from the diff, this results in nicer IR.

Reviewers: jdoerfert, arsenm, bjope, cameron.mcinally

Reviewed By: jdoerfert

Subscribers: arphaman, wdng, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D83102

show more ...

[NFC][Scalarizer] Add some insertelement/extractelement tests

See D82961/D82970/D83101/D83102.

[Scalarizer] Propagate IR flags

Summary:
The motivation for this was to propagate fast-math flags like nnan and
ninf on vector floating point operations to the corresponding scalar
operations to tak

[Scalarizer] Propagate IR flags

Summary:
The motivation for this was to propagate fast-math flags like nnan and
ninf on vector floating point operations to the corresponding scalar
operations to take advantage of follow-on optimizations. But I think
the same argument applies to all of our IR flags: if they apply to the
vector operation then they also apply to all the individual scalar
operations, and they might enable follow-on optimizations.

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D63593

llvm-svn: 364051

show more ...

[Scalarizer] Add UnaryOperator visitor to scalarization pass

Differential Revision: https://reviews.llvm.org/D62858

llvm-svn: 362558

Revert "Temporarily Revert "Add basic loop fusion pass.""

The reversion apparently deleted the test/Transforms directory.

Will be re-reverting again.

llvm-svn: 358552

Introduce llvm.loop.parallel_accesses and llvm.access.group metadata.

The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop ident

Introduce llvm.loop.parallel_accesses and llvm.access.group metadata.

The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.

This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).

This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.

The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.

Differential Revision: https://reviews.llvm.org/D52116

llvm-svn: 349725

show more ...

[PM] Port Scalarizer to the new pass manager.

Patch by: markus (Markus Lavin)

Reviewers: chandlerc, fedor.sergeev

Reviewed By: fedor.sergeev

Subscribers: llvm-commits, Ka-Ka, bjope

Differential

[PM] Port Scalarizer to the new pass manager.

Patch by: markus (Markus Lavin)

Reviewers: chandlerc, fedor.sergeev

Reviewed By: fedor.sergeev

Subscribers: llvm-commits, Ka-Ka, bjope

Differential Revision: https://reviews.llvm.org/D54695

llvm-svn: 347392

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.

* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line

for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)

apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

show more ...

IR: Make metadata typeless in assembly

Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.

- Only use

IR: Make metadata typeless in assembly

Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.

- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.

- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.

So, assembly like this:

define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}

turns into this:

define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}

I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.

This is part of PR21532.

llvm-svn: 224257

show more ...

Fix Scalarizer insertion point when replacing PHIs with insertelements

If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to

Fix Scalarizer insertion point when replacing PHIs with insertelements

If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones. The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.

llvm-svn: 197909

show more ...

Fix Scalarizer handling of vector GEPs with multiple index operands

The old code only worked for one index operand. Also handle "inbounds".

llvm-svn: 197908

Add a Scalarizer pass.

llvm-svn: 195471