[DSE] Remove MemDep-based implementation

The MemorySSA-based implementation has been enabled without issue
for a while now, so keeping the old implementation around doesn't
seem useful anymore. This

[DSE] Remove MemDep-based implementation

The MemorySSA-based implementation has been enabled without issue
for a while now, so keeping the old implementation around doesn't
seem useful anymore. This drops the MemDep-based implementation.

Differential Revision: https://reviews.llvm.org/D97877

show more ...

[NewPM][BasicAA] basicaa -> basic-aa in Transforms/DeadStoreElimination

Summary: Following https://reviews.llvm.org/D82607.

Reviewers: ychen

Subscribers: george.burgess.iv, asbirlea, llvm-commits

[NewPM][BasicAA] basicaa -> basic-aa in Transforms/DeadStoreElimination

Summary: Following https://reviews.llvm.org/D82607.

Reviewers: ychen

Subscribers: george.burgess.iv, asbirlea, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D82689

show more ...

Revert "Temporarily Revert "Add basic loop fusion pass.""

The reversion apparently deleted the test/Transforms directory.

Will be re-reverting again.

llvm-svn: 358552

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.

* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line

for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)

apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

show more ...

[DSE] Remove no-data-layout-only type-based overlap checking

DSE's overlap checking contained special logic, used only when no DataLayout
was available, which inferred a complete overwrite when the

[DSE] Remove no-data-layout-only type-based overlap checking

DSE's overlap checking contained special logic, used only when no DataLayout
was available, which inferred a complete overwrite when the pointee types were
equal. This logic seems fine for regular loads/stores, but does not work for
memcpy and friends. Instead of fixing this, I'm just removing it.
Philosophically, transformations should not contain enhanced behavior used only
when data layout is lacking (data layout should be strictly additive), and
maintaining these rarely-tested code paths seems not worthwhile at this stage.

Credit to Aliaksei Zasenka for the bug report and the diagnosis. The test case
(slightly reduced from that provided by Aliaksei) replaces the original
contents of test/Transforms/DeadStoreElimination/no-targetdata.ll -- a few
other tests have been updated to have a data layout.

llvm-svn: 220035

show more ...

Catch more CHECK that can be converted to CHECK-LABEL in Transforms for easier debugging. No functionality change.

This conversion was done with the following bash script:

find test/Transforms -n

Catch more CHECK that can be converted to CHECK-LABEL in Transforms for easier debugging. No functionality change.

This conversion was done with the following bash script:

find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done

llvm-svn: 186269

show more ...

Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ModuleID

This is done to avoid odd test failures, like the one fixed in r171243.

My previous regex was not good enough to f

Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ModuleID

This is done to avoid odd test failures, like the one fixed in r171243.

My previous regex was not good enough to find these.

llvm-svn: 171343

show more ...

Make BasicAliasAnalysis a normal AliasAnalysis implementation which
does normal initialization and normal chaining. Change the default
AliasAnalysis implementation to NoAlias.

Update StandardCompile

Make BasicAliasAnalysis a normal AliasAnalysis implementation which
does normal initialization and normal chaining. Change the default
AliasAnalysis implementation to NoAlias.

Update StandardCompileOpts.h and friends to explicitly request
BasicAliasAnalysis.

Update tests to explicitly request -basicaa.

llvm-svn: 116720

show more ...

Delete useless trailing semicolons.

llvm-svn: 92740

Fix some CHECK lines which were ignored by accident.

llvm-svn: 91214

Teach BasicAA that a constant expression can't alias memory provably not
allocated until runtime (such as an alloca). Patch by Hans Wennborg!

llvm-svn: 88760