[ASan] Removed unused AddressSanitizerPass functional pass.

This is a clean-up patch. The functional pass was rolled into the module pass in D112732.

Reviewed By: vitalybuka, aeubanks

Differential

[ASan] Removed unused AddressSanitizerPass functional pass.

This is a clean-up patch. The functional pass was rolled into the module pass in D112732.

Reviewed By: vitalybuka, aeubanks

Differential Revision: https://reviews.llvm.org/D120674

show more ...

[test] Remove some legacy PM tests in llvm/test/Instrumentation/AddressSanitizer

[NewPM][ASan] Make ASan tests work under NPM

Under NPM, the asan-globals-md analysis is required but cannot be run
within the asan function pass due to module analyses not being able to
run from a f

[NewPM][ASan] Make ASan tests work under NPM

Under NPM, the asan-globals-md analysis is required but cannot be run
within the asan function pass due to module analyses not being able to
run from a function pass. So this pins all tests using "-asan" to the
legacy PM and adds a corresponding RUN line with
-passes='require<asan-globals-md>,function(asan)'.

Now all tests in Instrumentation/AddressSanitizer pass when
-enable-new-pm is by default on.

Tests were automatically converted using the following python script and
failures were manually fixed up.

import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -asan -asan-module ' in l and '\\' not in l:
f.write(l.replace(' -asan -asan-module ', ' -asan -asan-module -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan -asan-module ', " -passes='require<asan-globals-md>,function(asan),module(asan-module)' "))
f.write('\n')
elif "RUN:" in l and ' -asan ' in l and '\\' not in l:
f.write(l.replace(' -asan ', ' -asan -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan ', " -passes='require<asan-globals-md>,function(asan)' "))
f.write('\n')
else:
f.write(l)
f.write('\n')

See https://bugs.llvm.org/show_bug.cgi?id=46611.

Reviewed By: vitalybuka

Differential Revision: https://reviews.llvm.org/D83921

show more ...

[Local] Do not move around dbg.declares during replaceDbgDeclare

replaceDbgDeclare is used to update the descriptions of stack variables
when they are moved (e.g. by ASan or SafeStack). A side effec

[Local] Do not move around dbg.declares during replaceDbgDeclare

replaceDbgDeclare is used to update the descriptions of stack variables
when they are moved (e.g. by ASan or SafeStack). A side effect of
replaceDbgDeclare is that it moves dbg.declares around in the
instruction stream (typically by hoisting them into the entry block).
This behavior was introduced in llvm/r227544 to fix an assertion failure
(llvm.org/PR22386), but no longer appears to be necessary.

Hoisting a dbg.declare generally does not create problems. Usually,
dbg.declare either describes an argument or an alloca in the entry
block, and backends have special handling to emit locations for these.
In optimized builds, LowerDbgDeclare places dbg.values in the right
spots regardless of where the dbg.declare is. And no one uses
replaceDbgDeclare to handle things like VLAs.

However, there doesn't seem to be a positive case for moving
dbg.declares around anymore, and this reordering can get in the way of
understanding other bugs. I propose getting rid of it.

Testing: stage2 RelWithDebInfo sanitized build, check-llvm

rdar://59397340

Differential Revision: https://reviews.llvm.org/D74517

show more ...

[asan] Remove debug locations from alloca prologue instrumentation

Summary:
This fixes https://llvm.org/PR26673
"Wrong debugging information with -fsanitize=address"
where asan instrumentation cause

[asan] Remove debug locations from alloca prologue instrumentation

Summary:
This fixes https://llvm.org/PR26673
"Wrong debugging information with -fsanitize=address"
where asan instrumentation causes the prologue end to be computed
incorrectly: findPrologueEndLoc, looks for the first instruction
with a debug location to determine the prologue end. Since the asan
instrumentation instructions had debug locations, that prologue end was
at some instruction, where the stack frame is still being set up.

There seems to be no good reason for extra debug locations for the
asan instrumentations that set up the frame; they don't have a natural
source location. In the debugger they are simply located at the start
of the function.

For certain other instrumentations like -fsanitize-coverage=trace-pc-guard
the same problem persists - that might be more work to fix, since it
looks like they rely on locations of the tracee functions.

This partly reverts aaf4bb239487e0a3b20a8eaf94fc641235ba2c29
"[asan] Set debug location in ASan function prologue"
whose motivation was to give debug location info to the coverage callback.
Its test only ensures that the call to @__sanitizer_cov_trace_pc_guard is
given the correct source location; as the debug location is still set in
ModuleSanitizerCoverage::InjectCoverageAtBlock, the test does not break.
So -fsanitize-coverage is hopefully unaffected - I don't think it should
rely on the debug locations of asan-generated allocas.

Related revision: 3c6c14d14b40adfb581940859ede1ac7d8ceae7a
"ASAN: Provide reliable debug info for local variables at -O0."

Below is how the X86 assembly version of the added test case changes.
We get rid of some .loc lines and put prologue_end where the user code starts.

```diff
--- 2.master.s 2019-12-02 12:32:38.982959053 +0100
+++ 2.patch.s 2019-12-02 12:32:41.106246674 +0100
@@ -45,8 +45,6 @@
.cfi_offset %rbx, -24
xorl %eax, %eax
movl %eax, %ecx
- .Ltmp2:
- .loc 1 3 0 prologue_end # 2.c:3:0
cmpl $0, __asan_option_detect_stack_use_after_return
movl %edi, 92(%rbx) # 4-byte Spill
movq %rsi, 80(%rbx) # 8-byte Spill
@@ -57,9 +55,7 @@
callq __asan_stack_malloc_0
movq %rax, 72(%rbx) # 8-byte Spill
.LBB1_2:
- .loc 1 0 0 is_stmt 0 # 2.c:0:0
movq 72(%rbx), %rax # 8-byte Reload
- .loc 1 3 0 # 2.c:3:0
cmpq $0, %rax
movq %rax, %rcx
movq %rax, 64(%rbx) # 8-byte Spill
@@ -72,9 +68,7 @@
movq %rax, %rsp
movq %rax, 56(%rbx) # 8-byte Spill
.LBB1_4:
- .loc 1 0 0 # 2.c:0:0
movq 56(%rbx), %rax # 8-byte Reload
- .loc 1 3 0 # 2.c:3:0
movq %rax, 120(%rbx)
movq %rax, %rcx
addq $32, %rcx
@@ -99,7 +93,6 @@
movb %r8b, 31(%rbx) # 1-byte Spill
je .LBB1_7
# %bb.5:
- .loc 1 0 0 # 2.c:0:0
movq 40(%rbx), %rax # 8-byte Reload
andq $7, %rax
addq $3, %rax
@@ -118,7 +111,8 @@
movl %ecx, (%rax)
movq 80(%rbx), %rdx # 8-byte Reload
movq %rdx, 128(%rbx)
- .loc 1 4 3 is_stmt 1 # 2.c:4:3
+.Ltmp2:
+ .loc 1 4 3 prologue_end # 2.c:4:3
movq %rax, %rdi
callq f
movq 48(%rbx), %rax # 8-byte Reload
```

Reviewers: eugenis, aprantl

Reviewed By: eugenis

Subscribers: ormris, aprantl, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D70894

show more ...

[DebugInfo] Add DILabel metadata and intrinsic llvm.dbg.label.

In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
nam

[DebugInfo] Add DILabel metadata and intrinsic llvm.dbg.label.

In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is

!DILabel(scope: !1, name: "foo", file: !2, line: 3)

We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is

llvm.dbg.label(metadata !1)

It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.

We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.

Differential Revision: https://reviews.llvm.org/D45024

Patch by Hsiangkai Wang.

llvm-svn: 331841

show more ...

ASAN: Provide reliable debug info for local variables at -O0.

The function stack poisioner conditionally stores local variables
either in an alloca or in malloc'ated memory, which has the
unfortunat

ASAN: Provide reliable debug info for local variables at -O0.

The function stack poisioner conditionally stores local variables
either in an alloca or in malloc'ated memory, which has the
unfortunate side-effect, that the actual address of the variable is
only materialized when the variable is accessed, which means that
those variables are mostly invisible to the debugger even when
compiling without optimizations.

This patch stores the address of the local stack base into an alloca,
which can be referred to by the debug info and is available throughout
the function. This adds one extra pointer-sized alloca to each stack
frame (but mem2reg can optimize it away again when optimizations are
enabled, yielding roughly the same debug info quality as before in
optimized code).

rdar://problem/30433661

Differential Revision: https://reviews.llvm.org/D41034

llvm-svn: 320415

show more ...