[test] Add explicit dso_local to definitions in ELF static relocation model tests

[test] Add explicit dso_local to constant/global variable declarations

They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.

For external data, clang -fno-pic e

[test] Add explicit dso_local to constant/global variable declarations

They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.

For external data, clang -fno-pic emits the dso_local specifier for ELF and
non-MinGW COFF. Adding explicit dso_local makes these tests in align with the
clang behavior and helps implementing an option to use GOT indirection for
external data access in -fno-pic mode (to avoid copy relocations).

show more ...

Revert "Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`"""

This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.

Previously, since bots turning on EXP

Revert "Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`"""

This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.

Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.

show more ...

Revert "Revert "Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`""""

This reverts commit bb51d243308dbcc9a8c73180ae7b9e47b98e68fb.

Revert "Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`"""

This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.

On bots llvm-clang-x86_64-expensive-c

Revert "Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`"""

This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.

On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll

show more ...

Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`""

This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.

There are issues to be investigated for polly bots

Revert "Reland "[Support] make report_fatal_error `abort` instead of `exit`""

This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.

There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.

show more ...

Reland "[Support] make report_fatal_error `abort` instead of `exit`"

Summary:
Reland D67847 after D73742 is committed. Replace `sys::Process::Exit(1)`
with `abort` in `report_fatal_error`.

After th

Reland "[Support] make report_fatal_error `abort` instead of `exit`"

Summary:
Reland D67847 after D73742 is committed. Replace `sys::Process::Exit(1)`
with `abort` in `report_fatal_error`.

After this patch, for tools turning on `CrashRecoveryContext`,
crash handler installed by `CrashRecoveryContext` is called unless
they installed a non-returning handler using `llvm::install_fatal_error_handler`
like `cc1_main` currently does.

Reviewers: rnk, MaskRay, aganea, hans, espindola, jhenderson

Subscribers: jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, rupprecht, jocewei, jsji, Jim, dmgreen, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, cfe-commits, llvm-commits

Tags: #clang, #llvm

Differential Revision: https://reviews.llvm.org/D74456

show more ...

Revert "[Support] make report_fatal_error `abort` instead of `exit`"

This reverts commit 647c3f4e47de8a850ffcaa897db68702d8d2459a.

Got bots failure from sanitizer-windows and maybe others.

[Support] make report_fatal_error `abort` instead of `exit`

Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed

[Support] make report_fatal_error `abort` instead of `exit`

Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.

** The reason it fixes PR35547 is

`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).

Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola

Reviewed By: rnk, MaskRay

Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits

Tags: #llvm, #clang

Differential Revision: https://reviews.llvm.org/D67847

show more ...

[Targets] Add errors for tiny and kernel codemodel on targets that don't support them

Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffecti

[Targets] Add errors for tiny and kernel codemodel on targets that don't support them

Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.

Differential Revision: https://reviews.llvm.org/D50141

llvm-svn: 348585

show more ...

Delete Default and JITDefault code models

IMHO it is an antipattern to have a enum value that is Default.

At any given piece of code it is not clear if we have to handle
Default or if has already b

Delete Default and JITDefault code models

IMHO it is an antipattern to have a enum value that is Default.

At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.

This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.

llvm-svn: 309911

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to gep operator

Similar to gep (r230786) and load (r230794) changes.

Similar migration script can be used to update test cas

[opaque pointer type] Add textual IR support for explicit type parameter to gep operator

Similar to gep (r230786) and load (r230794) changes.

Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.

(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)

import fileinput
import sys
import re

rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)

def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line

line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])

llvm-svn: 232184

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.

* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line

for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)

apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

show more ...

XCore target: fix const section handling

Xcore target ABI requires const data that is externally visible
to be handled differently if it has C-language linkage rather than
C++ language linkage.

Cla

XCore target: fix const section handling

Xcore target ABI requires const data that is externally visible
to be handled differently if it has C-language linkage rather than
C++ language linkage.

Clang now emits ".cp.rodata" section information.

All other externally visible constant data will be placed in the DP section.

llvm-svn: 201144

show more ...

XCore target: fix handling of unsized global arrays in large code model

llvm-svn: 198609

XCore target: fix large code model 'select' indirect address handling.

llvm-svn: 196088

XCore target: Add large code model

When using large code model:
Global objects larger than 'CodeModelLargeSize' bytes are placed in sections named with a trailing ".large"
The folded global address

XCore target: Add large code model

When using large code model:
Global objects larger than 'CodeModelLargeSize' bytes are placed in sections named with a trailing ".large"
The folded global address of such objects are lowered into the const pool.

During inspection it was noted that LowerConstantPool() was using a default offset of zero.
A fix was made, but due to only offsets of zero being generated, testing only verifies the change is not detrimental.

Correct the flags emitted for explicitly specified sections.

We assume the size of the object queried by getSectionForConstant() is never greater than CodeModelLargeSize.
To handle greater than CodeModelLargeSize, changes to AsmPrinter would be required.

llvm-svn: 196087

show more ...

XCore target: extend tests in preparation

llvm-svn: 196086