[PowerPC] Restore stack ptr from base ptr when available

On subtargets that have a red zone, we will copy the stack pointer to the base
pointer in the prologue prior to updating the stack pointer. T

[PowerPC] Restore stack ptr from base ptr when available

On subtargets that have a red zone, we will copy the stack pointer to the base
pointer in the prologue prior to updating the stack pointer. There are no other
updates to the base pointer after that. This suggests that we should be able to
restore the stack pointer from the base pointer rather than loading it from the
back chain or adding the frame size back to either the stack pointer or the
frame pointer.
This came about because functions that call setjmp need to restore the SP from
the FP because the back chain might have been clobbered
(see https://reviews.llvm.org/D92906). However, if the stack is realigned, the
restored SP might be incorrect (which is what caused the failures in the two
ASan test cases).

This patch was tested quite extensivelly both with sanitizer runtimes and
general code.

Differential revision: https://reviews.llvm.org/D93327

show more ...

OpaquePtr: Bulk update tests to use typed byval

Upgrade of the IR text tests should be the only thing blocking making
typed byval mandatory. Partially done through regex and partially
manual.

[PowerPC] Add some InstAlias definitions

Summary:
This patch add the InstAlias definitions for below instructions.

ADDI ADDIS ADDI8 ADDIS8
RLWINM8
ISEL ISEL8
OR OR_rec ORI ORI8 XORI8
CNTLZW8 CNTLZW

[PowerPC] Add some InstAlias definitions

Summary:
This patch add the InstAlias definitions for below instructions.

ADDI ADDIS ADDI8 ADDIS8
RLWINM8
ISEL ISEL8
OR OR_rec ORI ORI8 XORI8
CNTLZW8 CNTLZW8_rec
TEND TSR
RFEBB
NOR NOR_rec
MTCRF
SUBF SUBF_rec SUBFC SUBFC_rec
RLDICL_32_64
TW

Reviewed By: steven.zhang

Differential Revision: https://reviews.llvm.org/D77559

show more ...

[PowerPC] Ignore implicit register operands for MCInst

Summary:
When doing the conversion: MachineInst -> MCInst, we should ignore the
implicit operands, it will expose more opportunity for InstiAli

[PowerPC] Ignore implicit register operands for MCInst

Summary:
When doing the conversion: MachineInst -> MCInst, we should ignore the
implicit operands, it will expose more opportunity for InstiAlias.

Reviewed By: steven.zhang

Differential Revision: https://reviews.llvm.org/D77118

show more ...

Replace "no-frame-pointer-*" function attributes with "frame-pointer"

Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim"

Replace "no-frame-pointer-*" function attributes with "frame-pointer"

Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"

Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.

"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".

tests are mostly updated with

// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"

// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"

Patch by Yuanfang Chen (tabloid.adroit)!

Differential Revision: https://reviews.llvm.org/D56351

llvm-svn: 351049

show more ...

[PPC] Set SP after loading data from stack frame, if no red zone is present

Follow-up to r280705: Make sure that the SP is only restored after all data
is loaded from the stack frame, if there is no

[PPC] Set SP after loading data from stack frame, if no red zone is present

Follow-up to r280705: Make sure that the SP is only restored after all data
is loaded from the stack frame, if there is no red zone.

This completes the fix for https://llvm.org/bugs/show_bug.cgi?id=26519.

Differential Revision: https://reviews.llvm.org/D24466

llvm-svn: 282174

show more ...

[PPC] Claim stack frame before storing into it, if no red zone is present

Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of it
there is no guarantee that this part of the stack wi

[PPC] Claim stack frame before storing into it, if no red zone is present

Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of it
there is no guarantee that this part of the stack will not be modified
by any interrupt. To avoid this, make sure to claim the stack frame first
before storing into it.

This fixes https://llvm.org/bugs/show_bug.cgi?id=26519.

Differential Revision: https://reviews.llvm.org/D24093

llvm-svn: 280705

show more ...

Find available scratch register to use in function prologue and epilogue as part of shrink wrapping.

Phabricator: http://reviews.llvm.org/D13955
llvm-svn: 253247

[PowerPC] Enable printing instructions using aliases

TableGen had been nicely generating code to print a number of instructions using
shorter aliases (and PowerPC has plenty of short mnemonics), but

[PowerPC] Enable printing instructions using aliases

TableGen had been nicely generating code to print a number of instructions using
shorter aliases (and PowerPC has plenty of short mnemonics), but we were not
calling it. For some of the aliases we support in the parser, TableGen can't
infer the "inverse" alias relationship, so there is still more to do.

Thus, after some hours of updating test cases...

llvm-svn: 235616

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.

* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line

for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)

apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

show more ...

[PowerPC] Fix unwind info with dynamic stack realignment

Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly

[PowerPC] Fix unwind info with dynamic stack realignment

Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.

This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.

Reviewers: willschm, uweigand, hfinkel

Reviewed By: hfinkel

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D6410

llvm-svn: 222996

show more ...

[PowerPC] 32-bit ELF PIC support

This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.

Patch

[PowerPC] 32-bit ELF PIC support

This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.

Patch by Justin Hibbits!

llvm-svn: 213427

show more ...

TBAA: remove !tbaa from testing cases when they are not needed.

llvm-svn: 191689

PPC: Add base-pointer support to builtin setjmp/longjmp

First, this changes the base-pointer implementation to remove an unnecessary
complication (and one that is incompatible with how builtin SjLj

PPC: Add base-pointer support to builtin setjmp/longjmp

First, this changes the base-pointer implementation to remove an unnecessary
complication (and one that is incompatible with how builtin SjLj is
implemented): instead of using r31 as the base pointer when it is not needed as
a frame pointer, now the base pointer will always be r30 when needed.

Second, we introduce another pseudo register, BP, which is used just like the FP
pseudo register to refer to the base register before we know for certain what
register it will be.

Third, we now save BP into the jmp_buf, and restore r30 from that slot in
longjmp. If the function that called setjmp did not use a base pointer, then
r30 will be overwritten by the setjmp-calling-function's restore code. FP
restoration (which is restored into r31) works the same way.

llvm-svn: 186545

show more ...

PPC: Implement base pointer and stack realignment

This builds on some frame-lowering code that has existed since 2005 (r24224)
but was disabled in 2008 (r48188) because it needed base pointer suppor

PPC: Implement base pointer and stack realignment

This builds on some frame-lowering code that has existed since 2005 (r24224)
but was disabled in 2008 (r48188) because it needed base pointer support to
function correctly. This implementation follows the strategy suggested by Dale
Johannesen in r48188 where the following comment was added:

This does not currently work, because the delta between old and new stack
pointers is added to offsets that reference incoming parameters after the
prolog is generated, and the code that does that doesn't handle a variable
delta. You don't want to do that anyway; a better approach is to reserve
another register that retains to the incoming stack pointer, and reference
parameters relative to that.

And now we do exactly that. If we don't need a frame pointer, then we use r31
as a base pointer. If we do need a frame pointer, then we use r30 as a base
pointer. The base pointer retains the value of the stack pointer before it was
decremented in the prologue. We then use the base pointer to resolve all
negative frame indicies. The basic scheme follows that for base pointers in the
X86 backend.

We use a base pointer when we need to dynamically realign the incoming stack
pointer. This currently applies only to static objects (dynamic allocas with
large alignments, and base-pointer support in SjLj lowering will come in future
commits).

llvm-svn: 186478

show more ...