[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
inf

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.

After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.

show more ...

[lldb] Convert "LLDB" log channel to the new API

[lldb][NFC] Inclusive Language: rename master plan to controlling plan

[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.

[lldb][NFC] Inclusive Language: rename master plan to controlling plan

[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.

Reviewed By: jingham

Differential Revision: https://reviews.llvm.org/D113019

show more ...

[lldb] Avoid moving ThreadPlanSP from plans vector

Change `ThreadPlanStack::PopPlan` and `::DiscardPlan` to not do the following:

1. Move the last plan, leaving a moved `ThreadPlanSP` in the plans

[lldb] Avoid moving ThreadPlanSP from plans vector

Change `ThreadPlanStack::PopPlan` and `::DiscardPlan` to not do the following:

1. Move the last plan, leaving a moved `ThreadPlanSP` in the plans vector
2. Operate on the last plan
3. Pop the last plan off the plans vector

This leaves a period of time where the last element in the plans vector has been moved. I am not sure what, if any, guarantees there are when doing this, but it seems like it would/could leave a null `ThreadPlanSP` in the container. There are asserts in place to prevent empty/null `ThreadPlanSP` instances from being pushed on to the stack, and so this could break that invariant during multithreaded access to the thread plan stack.

An open question is whether this use of `std::move` was the result of a measure performance problem.

Differential Revision: https://reviews.llvm.org/D106171

show more ...

[lldb] Rename {stop,run}_vote to report_{stop,run}_vote

Rename `stop_vote` and `run_vote` to `report_stop_vote` and `report_run_vote`
respectively. These variables are limited to logic involving (ev

[lldb] Rename {stop,run}_vote to report_{stop,run}_vote

Rename `stop_vote` and `run_vote` to `report_stop_vote` and `report_run_vote`
respectively. These variables are limited to logic involving (event) reporting only.
This naming is intended to make their context more clear.

Differential Revision: https://reviews.llvm.org/D96917

show more ...

[lldb] Remove unused ThreadPlan tracer utilities (NFC)

Delete unused `EnableTracer()` and `SetTracer()` functions on `Thread`. By deleting
these, their `ThreadPlan` counterparts also become unused.

[lldb] Remove unused ThreadPlan tracer utilities (NFC)

Delete unused `EnableTracer()` and `SetTracer()` functions on `Thread`. By deleting
these, their `ThreadPlan` counterparts also become unused.

Then, by deleting `ThreadPlanStack::EnableTracer`, `EnableSingleStep` becomes unused.
With no more callers to `EnableSingleStep`, the value `m_single_step` is always true and
can be removed as well.

Differential Revision: https://reviews.llvm.org/D96666

show more ...

[lldb] Minor cleanups to ThreadPlan.h (NFC)

While learning about ThreadPlan, I did a bit of cleanup:

* Remove unused code
* Move functions to protected where applicable
* Remove virtual for functio

[lldb] Minor cleanups to ThreadPlan.h (NFC)

While learning about ThreadPlan, I did a bit of cleanup:

* Remove unused code
* Move functions to protected where applicable
* Remove virtual for functions that are not overridden

Differential Revision: https://reviews.llvm.org/D96277

show more ...

[ThreadPlan] fix exec on Linux

Fix LLDB debug builds

Summary:
A recent change in ThreadPlans introduced this little compilation error.
Seems to be related to the work around https://reviews.llvm.org/D76814.

Reviewers: clayborg,

Fix LLDB debug builds

Summary:
A recent change in ThreadPlans introduced this little compilation error.
Seems to be related to the work around https://reviews.llvm.org/D76814.

Reviewers: clayborg, labath, jingham

Reviewed By: jingham

Subscribers: lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D77450

show more ...

Fix unused variable, format, and format string warnings.
NFC.

Allow the ThreadPlanStackMap to hold the thread plans for threads
that were not reported by the OS plugin. To facilitate this, move
adding/updating the ThreadPlans for a Thread to the ThreadPlanStac

Allow the ThreadPlanStackMap to hold the thread plans for threads
that were not reported by the OS plugin. To facilitate this, move
adding/updating the ThreadPlans for a Thread to the ThreadPlanStackMap.
Also move dumping thread plans there as well.

Added some tests for "thread plan list" and "thread plan discard" since
I didn't seem to have written any originally.

Differential Revision: https://reviews.llvm.org/D76814

show more ...

Move thread plan stacks into the Process, indexed by TID.

Differential Revision: https://reviews.llvm.org/D75880

Make ThreadPlans use TID and Process, rather than Thread *.

Differential Revision: https://reviews.llvm.org/D75711

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp ----------------------------------------

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).

This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).

Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D73258

show more ...

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style for

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.

So instead of writing:

if (log)
log->Printf("%s\n", str);

You'd write:

LLDB_LOG(log, "%s\n", str);

This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.

find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +

Differential revision: https://reviews.llvm.org/D65128

llvm-svn: 366936

show more ...

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.

I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.

Differential revision: https://reviews.llvm.org/D60508

llvm-svn: 358135

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Add setting to require hardware breakpoints.

When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`.

Add setting to require hardware breakpoints.

When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.

This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.

Differential revision: https://reviews.llvm.org/D54221

llvm-svn: 346920

show more ...

Remove header grouping comments.

This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdate

Remove header grouping comments.

This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.

llvm-svn: 346626

show more ...

Move RegisterValue,Scalar,State from Core to Utility

These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall co

Move RegisterValue,Scalar,State from Core to Utility

These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).

The XCode project will need to be updated after this change.

Differential Revision: https://reviews.llvm.org/D49740

llvm-svn: 339127

show more ...

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to r

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.

FYI, the script I used was:

import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue

if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)

continue

if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""

out.write(line)

os.rename(tmp, sys.argv[1])

Differential Revision: https://reviews.llvm.org/D46144

llvm-svn: 331197

show more ...

Move Log from Core -> Utility.

All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.

Differential Revision: https://reviews.llvm.org/D30559

llvm-

Move Log from Core -> Utility.

All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.

Differential Revision: https://reviews.llvm.org/D30559

llvm-svn: 296909

show more ...

Fix incorrect logging in ThreadPlan::ShouldReportStop

it used printf with formatv style specifications. Also, switch to
LLDB_LOG.

llvm-svn: 294024

Break some dependencies in lldbUtility.

Differential Revision: https://reviews.llvm.org/D29359

llvm-svn: 293806

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...