Add the "sent break" message to the "gdb-remote packets" channel

It was originally only in "gdb-remote process" but it is convenient to
also have it come as part of gdb-remote packets.

[lldb] Convert ProcessGDBRemoteLog to the new API

[lldb] Remove non-stop mode code

We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issu

[lldb] Remove non-stop mode code

We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.

It also complicates making further changes to stop reply packet
handling, which is what I am about to do.

Differential Revision: https://reviews.llvm.org/D110553

show more ...

Revert "Revert "Reset the wakeup timeout when we re-enter the continue wait.""

This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.

The original version had a copy-paste error: using the I

Revert "Revert "Reset the wakeup timeout when we re-enter the continue wait.""

This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.

The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).

Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.

show more ...

Revert "Reset the wakeup timeout when we re-enter the continue wait."

This reverts commit bd5751f3d249ec0798060bd98c07272174c52af0.
This patch series is causing us to every so often miss switching
t

Revert "Reset the wakeup timeout when we re-enter the continue wait."

This reverts commit bd5751f3d249ec0798060bd98c07272174c52af0.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.

Reverting till I can figure out how that could be happening.

show more ...

Reset the wakeup timeout when we re-enter the continue wait.

Differential Revision: https://reviews.llvm.org/D102562

Add an "interrupt timeout" to Process, and pipe that through the
ProcessGDBRemote plugin layers.

Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after

Add an "interrupt timeout" to Process, and pipe that through the
ProcessGDBRemote plugin layers.

Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.

Differential Revision: https://reviews.llvm.org/D102085

show more ...

Make llvm::StringRef to std::string conversions explicit.

This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.

This is mostly m

Make llvm::StringRef to std::string conversions explicit.

This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.

This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.

This doesn't actually modify StringRef yet, I'll do that in a follow-up.

show more ...

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp ----------------------------------------

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).

This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).

Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D73258

show more ...

[NFC] Return llvm::StringRef from StringExtractor::GetStringRef.

This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const

[NFC] Return llvm::StringRef from StringExtractor::GetStringRef.

This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.

llvm-svn: 369493

show more ...

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style for

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.

So instead of writing:

if (log)
log->Printf("%s\n", str);

You'd write:

LLDB_LOG(log, "%s\n", str);

This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.

find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +

Differential revision: https://reviews.llvm.org/D65128

llvm-svn: 366936

show more ...

[lldb] NFC modernize codebase with modernize-use-nullptr

Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]

This commit is the result of modernizing the LLDB codeba

[lldb] NFC modernize codebase with modernize-use-nullptr

Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]

This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.

This is the command I ran and I to fix and format the code base:

```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```

NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.

NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.

Reviewers: martong, espindola, shafik, #lldb, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits

Tags: #lldb, #llvm

Differential Revision: https://reviews.llvm.org/D61847

llvm-svn: 361484

show more ...

gdb-remote: reduce some inclusion of Target/Process.h

Reduce the inclusion of Target/Process.h to help isolate why Process is being
preserved during the build of `lldb-server`.

llvm-svn: 359811

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Simplify Boolean expressions

This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:

run-clang-tidy.py -checks='-*,readability-simplify-

Simplify Boolean expressions

This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:

run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD

Differential revision: https://reviews.llvm.org/D55584

llvm-svn: 349215

show more ...

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to r

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.

FYI, the script I used was:

import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue

if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)

continue

if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""

out.write(line)

os.rename(tmp, sys.argv[1])

Differential Revision: https://reviews.llvm.org/D46144

llvm-svn: 331197

show more ...

Handle O reply packets during qRcmd

Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O

Handle O reply packets during qRcmd

Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.

This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.

Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html

Reviewers: clayborg

Reviewed By: clayborg

Subscribers: labath, lldb-commits

Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <[email protected]>

llvm-svn: 322190

show more ...

Fix a couple of warnings (NFC)

llvm-svn: 321120

Introduce chrono to more gdb-remote functions

Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted bac

Introduce chrono to more gdb-remote functions

Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.

The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.

Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.

The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.

(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.

Reviewers: clayborg, zturner, jingham

Subscribers: lldb-commits

Differential Revision: https://reviews.llvm.org/D26971

llvm-svn: 287864

show more ...

Remove usages of TimeValue from gdb-remote process plugin

Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy.

Remove usages of TimeValue from gdb-remote process plugin

Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy. As the function was
completely untested, I added a quick unit smoke test for it.

Reviewers: clayborg, zturner

Subscribers: lldb-commits

Differential Revision: https://reviews.llvm.org/D25391

llvm-svn: 285602

show more ...

async structured data packet handling improvements

This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an

async structured data packet handling improvements

This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an already-parsed structured data
element to taking just the packet contents.
* Moves the conversion of the JSON-async: packet contents from
GDBRemoteClientBase to the continuation delegate method.
* Adds a new unit test for verifying that the $JSON-asyc: packets get
decoded and that the decoded packets get forwarded on to the delegate
for further processing. Thanks to Pavel for making that whole section of
code easily unit testable!
* Tightens up the packet verification on reception of a $JSON-async:
packet contents. The code prior to this change is susceptible to a
segfault if a packet is carefully crafted that starts with $J but
has a total length shorter than the length of "$JSON-async:".

Reviewers: labath, clayborg, zturner

Differential Revision: https://reviews.llvm.org/D23884

llvm-svn: 281121

show more ...

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...

Revert "gdb-remote: Make the sequence mutex non-recursive"

This reverts commit r279725 as it breaks "dynamic register size" feature of mips.

llvm-svn: 280088

Convert some functions to use StringRef instead of c_str, len

This started as an effort to change StringExtractor to store a
StringRef internally instead of a std::string. I got that working
locall

Convert some functions to use StringRef instead of c_str, len

This started as an effort to change StringExtractor to store a
StringRef internally instead of a std::string. I got that working
locally with just 1 test failure which I was unable to figure out the
cause of. But it was also a massive changelist due to a trickle
down effect of changes.

So I'm starting over, using what I learned from the first time to
tackle smaller, more isolated changes hopefully leading up to
a full conversion by the end.

At first the changes (such as in this CL) will seem mostly
a matter of preference and pointless otherwise. However, there
are some places in my larger CL where using StringRef turned 20+
lines of code into 2, drastically simplifying logic. Hopefully
once these go in they will illustrate some of the benefits of
thinking in terms of StringRef.

llvm-svn: 279917

show more ...

gdb-remote: Make the sequence mutex non-recursive

Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a

gdb-remote: Make the sequence mutex non-recursive

Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a couple of changes:
- The only caller of Read/WriteRegister, GDBRemoteRegisterContext class, was already acquiring
the mutex, so these functions do not need to. All functions which now do not take a lock, take
an lock argument instead, to remind the caller of this fact.
- GetThreadSuffixSupported() was being called from locked and unlocked contexts (including
contexts where the process was running, and the call would fail if it did not have the result
cached). I have split this into two functions, one which computes the thread suffix support and
caches it (this one always takes the lock), and another, which returns the cached value (and
never needs to take the lock). This feels quite natural as ProcessGdbRemote was already
pre-caching this value at the start.

Reviewers: clayborg

Subscribers: lldb-commits

Differential Revision: https://reviews.llvm.org/D23802

llvm-svn: 279725

show more ...