Remove ConstString from DynamicLoader, JITLoader and Instruction plugin names

[lldb] Return StringRef from PluginInterface::GetPluginName

There is no reason why this function should be returning a ConstString.

While modifying these files, I also fixed several instances where

[lldb] Return StringRef from PluginInterface::GetPluginName

There is no reason why this function should be returning a ConstString.

While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.

I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.

Differential Revision: https://reviews.llvm.org/D111877

show more ...

[lldb] Remove PluginInterface::GetPluginVersion

In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.

Differential Revision: https://

[lldb] Remove PluginInterface::GetPluginVersion

In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.

Differential Revision: https://reviews.llvm.org/D109600

show more ...

Handle all standalone combinations of LC_NOTEs w/ & w/o addr & uuid

Fill out ProcessMachCore::DoLoadCore to handle LC_NOTE hints with
a UUID or with a UUID+address, and load the binary at the specif

Handle all standalone combinations of LC_NOTEs w/ & w/o addr & uuid

Fill out ProcessMachCore::DoLoadCore to handle LC_NOTE hints with
a UUID or with a UUID+address, and load the binary at the specified
offset correctly. Add tests for all four combinations. Change
DynamicLoaderStatic to not re-set a Section's load address in the
Target if it's already been specified.

Differential Revision: https://reviews.llvm.org/D99571
rdar://51490545

show more ...

[lldb] Access the ModuleList through iterators where possible (NFC)

Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking w

[lldb] Access the ModuleList through iterators where possible (NFC)

Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking where applicable.

Differential revision: https://reviews.llvm.org/D94271

show more ...

[lldb] Delete copy operations on PluginInterface class

This is a polymorphic class, copying it is a bad idea.

This was not a problem because most classes inheriting from it were
deleting their copy

[lldb] Delete copy operations on PluginInterface class

This is a polymorphic class, copying it is a bad idea.

This was not a problem because most classes inheriting from it were
deleting their copy operations themselves. However, this enables us to
delete those explicit deletions, and ensure noone forgets to add them in
the future.

show more ...

[lldb/Plugin] Reject WASM and Hexagon in DynamicLoaderStatic

The WASM and Hexagon plugin check the ArchType rather than the OSType,
so explicitly reject those in the DynamicLoaderStatic.

Differenti

[lldb/Plugin] Reject WASM and Hexagon in DynamicLoaderStatic

The WASM and Hexagon plugin check the ArchType rather than the OSType,
so explicitly reject those in the DynamicLoaderStatic.

Differential revision: https://reviews.llvm.org/D74780

show more ...

[lldb/Plugin] s/LLDB_PLUGIN/LLDB_PLUGIN_DEFINE/ (NFC)

Rename LLDB_PLUGIN to LLDB_PLUGIN_DEFINE as Pavel suggested in D73067 to
avoid name conflict.

[LLDB] Fix GCC warnings about extra semicolons. NFC.

[lldb/Plugins] Use external functions to (de)initialize plugins

This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to

[lldb/Plugins] Use external functions to (de)initialize plugins

This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.

Differential revision: https://reviews.llvm.org/D74245

show more ...

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp ----------------------------------------

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).

This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).

Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D73258

show more ...

[lldb] NFC modernize codebase with modernize-use-nullptr

Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]

This commit is the result of modernizing the LLDB codeba

[lldb] NFC modernize codebase with modernize-use-nullptr

Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]

This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.

This is the command I ran and I to fix and format the code base:

```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```

NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.

NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.

Reviewers: martong, espindola, shafik, #lldb, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits

Tags: #lldb, #llvm

Differential Revision: https://reviews.llvm.org/D61847

llvm-svn: 361484

show more ...

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.

I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.

Differential revision: https://reviews.llvm.org/D60508

llvm-svn: 358135

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to r

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.

FYI, the script I used was:

import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue

if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)

continue

if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""

out.write(line)

os.rename(tmp, sys.argv[1])

Differential Revision: https://reviews.llvm.org/D46144

llvm-svn: 331197

show more ...

Rename Error -> Status.

This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.

A change of this magnitude cannot easily be done without
find and replace, but that h

Rename Error -> Status.

This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.

A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.

llvm-svn: 302872

show more ...

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...

second pass over removal of Mutex and Condition

llvm-svn: 270024

For logical backtrace work, lldb needs to track Module unloads etc & symoblicate an address based on a point in time

<rdar://problem/15314403>

This patch adds a new lldb_private::SectionLoadHistor

For logical backtrace work, lldb needs to track Module unloads etc & symoblicate an address based on a point in time

<rdar://problem/15314403>

This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.

llvm-svn: 196557

show more ...

<rdar://problem/13854277>
<rdar://problem/13594769>

Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be ab

<rdar://problem/13854277>
<rdar://problem/13594769>

Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging

The plug-in interface changes:

Modified the lldb_private::PluginInterface class that all plug-ins inherit from:

Changed:

virtual const char * GetPluginName() = 0;

To:

virtual ConstString GetPluginName() = 0;

Removed:

virtual const char * GetShortPluginName() = 0;

- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.

llvm-svn: 181631

show more ...

Disable JITed code in any processes that use DynamicLoaderStatic.

llvm-svn: 176541

<rdar://problem/12586350>

This commit does three things:
(a) introduces a new notification model for adding/removing/changing modules to a ModuleList, and applies it to the Target's ModuleList, so t

<rdar://problem/12586350>

This commit does three things:
(a) introduces a new notification model for adding/removing/changing modules to a ModuleList, and applies it to the Target's ModuleList, so that we make sure to always trigger the right set of actions
whenever modules come and go in a target. Certain spots in the code still need to "manually" notify the Target for several reasons, so this is a work in progress
(b) adds a new capability to the Platforms: locating a scripting resources associated to a module. A scripting resource is a Python file that can load commands, formatters, ... and any other action
of interest corresponding to the loading of a module. At the moment, this is only implemented on Mac OS X and only for files inside .dSYM bundles - the next step is going to be letting
the frameworks themselves hold their scripting resources. Implementors of platforms for other systems are free to implement "the right thing" for their own worlds
(c) hooking up items (a) and (b) so that targets auto-load the scripting resources as the corresponding modules get loaded in a target. This has a few caveats at the moment:
- the user needs to manually add the .py file to the dSYM (soon, it will also work in the framework itself)
- if two modules with the same name show up during the lifetime of an LLDB session, the second one won't be able to load its scripting resource, but will otherwise work just fine

llvm-svn: 167569

show more ...

<rdar://problem/11757916>

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implem

<rdar://problem/11757916>

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()

Cleaned up header includes a bit as well.

llvm-svn: 162860

show more ...

<rdar://problem/11357711>

Fixed a crasher where the section load list was not thread safe.

llvm-svn: 159884

We were accessing the ModuleList in the target without locking it for tasks like
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load no

We were accessing the ModuleList in the target without locking it for tasks like
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)

<rdar://problem/11552372>

llvm-svn: 157668

show more ...