[trace] Add a flag to the decoder to output the instruction type

To build complex binding upon instruction trace, additional metadata 'instruction type' is needed.

This diff has followings:
- Add

[trace] Add a flag to the decoder to output the instruction type

To build complex binding upon instruction trace, additional metadata 'instruction type' is needed.

This diff has followings:
- Add a flag -k / --kind for instruction dump
- Remove SetGranularity and SetIgnoreErros from Trace cursor

Sample output:

```
(lldb) thread trace dump instruction -k
thread #1: tid = 3198805
libc.so.6`_IO_puts + 356
2107: 0x00007ffff7163594 ( return) retq
2106: 0x00007ffff7163592 ( other) popq %r13
2105: 0x00007ffff7163590 ( other) popq %r12
2104: 0x00007ffff716358f ( other) popq %rbp
2103: 0x00007ffff716358e ( other) popq %rbx
2102: 0x00007ffff716358c ( other) movl %ebx, %eax
2101: 0x00007ffff7163588 ( other) addq $0x8, %rsp
2100: 0x00007ffff7163570 ( cond jump) je 0x89588 ; <+344>
2099: 0x00007ffff716356e ( other) decl (%rdx)
2098: 0x00007ffff7163565 ( cond jump) je 0x8956e ; <+318>
2097: 0x00007ffff716355e ( other) cmpl $0x0, 0x33c02b(%rip) ; __libc_multiple_threads
2096: 0x00007ffff7163556 ( other) movq $0x0, 0x8(%rdx)
2095: 0x00007ffff7163554 ( cond jump) jne 0x89588 ; <+344>
2094: 0x00007ffff7163550 ( other) subl $0x1, 0x4(%rdx)
2093: 0x00007ffff7163549 ( other) movq 0x88(%rbp), %rdx
2092: 0x00007ffff7163547 ( cond jump) jne 0x89588 ; <+344>
2091: 0x00007ffff7163540 ( other) testl $0x8000, (%rbp) ; imm = 0x8000
2090: 0x00007ffff716353c ( other) cmovaq %rax, %rbx
2089: 0x00007ffff7163535 ( other) cmpq $0x7fffffff, %rbx ; imm = 0x7FFFFFFF
2088: 0x00007ffff7163530 ( other) movl $0x7fffffff, %eax ; imm = 0x7FFFFFFF
```

Reviewed By: wallace

Differential Revision: https://reviews.llvm.org/D128477

show more ...

[lldb] Use C++11 default member initializers

This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy

[lldb] Use C++11 default member initializers

This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.

$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix

This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.

Differential revision: https://reviews.llvm.org/D103483

show more ...

Recommit "[lldb] Don't dissasemble large functions by default"

This recommits f665e80c023 which was reverted in 1cbd1b8f692d for breaking
TestFoundationDisassembly.py. The fix is to use --force in t

Recommit "[lldb] Don't dissasemble large functions by default"

This recommits f665e80c023 which was reverted in 1cbd1b8f692d for breaking
TestFoundationDisassembly.py. The fix is to use --force in the test to avoid
bailing out on large functions.

I have also doubled the large function limit to 8000 bytes (~~ 2000 insns), as
the foundation library contains a lot of large-ish functions. The intent of this
feature is to prevent accidental disassembling of enormous (multi-megabyte)
"functions", not to get in people's way.

The original commit message follows:

If we have a binary without symbol information (and without
LC_FUNCTION_STARTS, if on a mac), then we have to resort to using
heuristics to determine the function boundaries. However, these don't
always work, and so we can easily end up thinking we have functions
which are several megabytes in size. Attempting to (accidentally)
disassemble these can take a very long time spam the terminal with
thousands of lines of disassembly.

This patch works around that problem by adding a sanity check to the
disassemble command. If we are about to disassemble a function which is
larger than a certain threshold, we will refuse to disassemble such a
function unless the user explicitly specifies the number of instructions
to disassemble, uses start/stop addresses for disassembly, or passes the
(new) --force argument.

The threshold is currently fairly aggressive (4000 bytes ~~ 1000
instructions). If needed, we can increase it, or even make it
configurable.

Differential Revision: https://reviews.llvm.org/D79789

show more ...

Revert "[lldb] Don't dissasemble large functions by default"

This reverts commit f665e80c023ec52557f55d7eeaf34471e4c6fa0d.

Reverting because it breaks TestFoundationDisassembly.py

[lldb] Don't dissasemble large functions by default

Summary:
If we have a binary without symbol information (and without
LC_FUNCTION_STARTS, if on a mac), then we have to resort to using
heuristics

[lldb] Don't dissasemble large functions by default

Summary:
If we have a binary without symbol information (and without
LC_FUNCTION_STARTS, if on a mac), then we have to resort to using
heuristics to determine the function boundaries. However, these don't
always work, and so we can easily end up thinking we have functions
which are several megabytes in size. Attempting to (accidentally)
disassemble these can take a very long time spam the terminal with
thousands of lines of disassembly.

This patch works around that problem by adding a sanity check to the
disassemble command. If we are about to disassemble a function which is
larger than a certain threshold, we will refuse to disassemble such a
function unless the user explicitly specifies the number of instructions
to disassemble, uses start/stop addresses for disassembly, or passes the
(new) --force argument.

The threshold is currently fairly aggressive (4000 bytes ~~ 1000
instructions). If needed, we can increase it, or even make it
configurable.

Differential Revision: https://reviews.llvm.org/D79789

show more ...

[lldb] Break up CommandObjectDisassemble::DoExecute

The function consisted of a complicated set of conditions to compute the
address ranges which are to be disassembled (depending on the mode
select

[lldb] Break up CommandObjectDisassemble::DoExecute

The function consisted of a complicated set of conditions to compute the
address ranges which are to be disassembled (depending on the mode
selected by command line switches). This patch creates a separate
function for each mode, so that DoExecute is only left with the task of
figuring out how to dump the relevant ranges.

This is NFC-ish, except for one change in the error message, which is
actually an improvement.

show more ...

[lldb] Update header guards to be consistent and compliant with LLVM (NFC)

LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pa

[lldb] Update header guards to be consistent and compliant with LLVM (NFC)

LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.

Differential revision: https://reviews.llvm.org/D74743

show more ...

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.

I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.

Differential revision: https://reviews.llvm.org/D60508

llvm-svn: 358135

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Clean-up usage of OptionDefinition arrays

Differential Revision: https://reviews.llvm.org/D52604

llvm-svn: 343348

Move ArchSpec to the Utility module

The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.

This

Move ArchSpec to the Utility module

The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.

This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.

llvm-svn: 318048

show more ...

Rename Error -> Status.

This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.

A change of this magnitude cannot easily be done without
find and replace, but that h

Rename Error -> Status.

This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.

A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.

llvm-svn: 302872

show more ...

Make Options::SetOptionValue take a StringRef.

llvm-svn: 286723

Convert option tables to ArrayRefs.

This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<Op

Convert option tables to ArrayRefs.

This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.

In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.

Differential revision: https://reviews.llvm.org/D24834

llvm-svn: 282188

show more ...

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...

Decoupled Options from CommandInterpreter.

Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a

Decoupled Options from CommandInterpreter.

Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.

This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.

Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham

llvm-svn: 278440

show more ...

Fix Clang-tidy modernize-use-nullptr and modernize-use-default warnings in some files in source/Commands; other minor fixes.

llvm-svn: 261389

Fix Clang-tidy misc-use-override warnings in source/Commands headers, unify closing inclusion guards

patch by Eugene Zelenko.

Differential Revision: http://reviews.llvm.org/D12207

llvm-svn: 246628

Change the disassemble option to specify the architecture from '-a'
to '-A'.

Add option '-a' / '--address' to disassemble which will find the
function that contains that address, and disassemble the

Change the disassemble option to specify the architecture from '-a'
to '-A'.

Add option '-a' / '--address' to disassemble which will find the
function that contains that address, and disassemble the entire function.

<rdar://problem/13436207>

llvm-svn: 179258

show more ...

Convert from the C-based LLVM Disassembler shim to the full MC Disassembler API's.
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the

Convert from the C-based LLVM Disassembler shim to the full MC Disassembler API's.
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the disassembly flavor for x86 based architectures to intel or att.

<rdar://problem/11319574>
<rdar://problem/9329275>

llvm-svn: 176392

show more ...

Switch "disassemble" with no arguments or options to disassemble the current frame instead of around the current PC.

llvm-svn: 170254

<rdar://problem/11757916>

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implem

<rdar://problem/11757916>

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()

Cleaned up header includes a bit as well.

llvm-svn: 162860

show more ...

Make raw & parsed commands subclasses of CommandObject rather than having the raw version implement an
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowled

Make raw & parsed commands subclasses of CommandObject rather than having the raw version implement an
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.

Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.

Made the CommandObject flags work for raw as well as parsed commands.

Made "expr" use the flags so that it requires you to be paused to run "expr".

llvm-svn: 158235

show more ...

disassemble with no arguments disassembles at the pc. Also got "disassemble -f" to work, that had gotten broken at some point in the past.

llvm-svn: 138929

Added two new classes for command options:

lldb_private::OptionGroup
lldb_private::OptionGroupOptions

OptionGroup lets you define a class that encapsulates settings that you want
to reuse i

Added two new classes for command options:

lldb_private::OptionGroup
lldb_private::OptionGroupOptions

OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:

OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;

Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:

CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}

We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.

Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();

And implemented a new callback named:

virtual Error Options::OptionParsingFinished();

This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.

Modfied:

virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;

to be:

virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;

(option_idx is now unsigned).

llvm-svn: 129415

show more ...