perf script python: Remove mixed indentation

Remove mixed indentation in Python scripts. Revert to either all tabs
(most common form) or all spaces (4 or 8) depending on what was the
intent of the

perf script python: Remove mixed indentation

Remove mixed indentation in Python scripts. Revert to either all tabs
(most common form) or all spaces (4 or 8) depending on what was the
intent of the original commit. This is necessary to complete Python3
support as it will flag an error if it encounters mixed indentation.

Signed-off-by: Tony Jones <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf script python: Add Python3 support to sctop.py

Support both Python2 and Python3 in the sctop.py script

There may be differences in the ordering of output lines due to
differences in dictionary

perf script python: Add Python3 support to sctop.py

Support both Python2 and Python3 in the sctop.py script

There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <[email protected]>
Cc: Tom Zanussi <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Seeteena Thoufeek <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf script: Add callchain to generic and tracepoint events

This provides valuable information for tracing performance problems.

Since this change alters the interface for the python scripts, also

perf script: Add callchain to generic and tracepoint events

This provides valuable information for tracing performance problems.

Since this change alters the interface for the python scripts, also
adjust the script generation and the provided scripts.

Signed-off-by: Joseph Schuchart <[email protected]>
Acked-by: Thomas Ilsche <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Ilsche <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf scripts: Fallback to syscalls:* when raw_syscalls:* is not available

Older kernels (e.g., RHEL6) do system call tracing via the
syscalls:sys_{enter,exit} tracepoints rather than using raw_sysca

perf scripts: Fallback to syscalls:* when raw_syscalls:* is not available

Older kernels (e.g., RHEL6) do system call tracing via the
syscalls:sys_{enter,exit} tracepoints rather than using raw_syscalls:*.

Update perf python and perl scripts to fallback to syscalls:* when
raw_syscalls:* isn't available.

Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luis Claudio R. Goncalves <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/5a6c64081a3375bc3bc66351b14559678ef4d71e.1402507908.git.bristot@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf script: Finish the rename from trace to script

The scripts have calls to 'perf trace' that need to be converted to 'perf script', do it.

This problem was introduced in 133dc4c.

Reported-by: T

perf script: Finish the rename from trace to script

The scripts have calls to 'perf trace' that need to be converted to 'perf script', do it.

This problem was introduced in 133dc4c.

Reported-by: Torok Edwin <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Torok Edwin <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf python scripting: Fixup cut'n'paste error in sctop script

Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <pau

perf python scripting: Fixup cut'n'paste error in sctop script

Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf python scripting: print the syscall name on sctop

[root@emilia tmp]# perf trace sctop 1
syscall events:

event count
-----------------------------------

perf python scripting: print the syscall name on sctop

[root@emilia tmp]# perf trace sctop 1
syscall events:

event count
---------------------------------------- ----------
read 215400
futex 4029
write 376
brk 33
rt_sigprocmask 24
select 17
lseek 2
fsync 1
^C[root@emilia tmp]#

Cc: David S. Miller <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf trace/scripting: Add rwtop and sctop scripts

A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the
perf event stream is fe

perf trace/scripting: Add rwtop and sctop scripts

A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the
perf event stream is fed continuously to the script, which
continuously aggregates the data and reports the current results
every 3 seconds, or at the optionally specified interval. After
the current results are displayed, the aggregations are cleared
and the cycle begins anew.

To run the scripts, simply pipe the output of the 'perf trace
record' step as input to the corresponding 'perf trace report'
step, using '-' as the filename to -o and -i:

$ perf trace record sctop -o - | perf trace report sctop -i -

Also adds clear_term() utility functions to the Util.pm and
Util.py utility modules, for use by any script to clear the
screen.

Signed-off-by: Tom Zanussi <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

show more ...