tools lib api: Add io_dir an allocation free readdir alternative

glibc's opendir allocates a minimum of 32kb, when called recursively
for a directory tree the memory consumption can add up - nearly

tools lib api: Add io_dir an allocation free readdir alternative

glibc's opendir allocates a minimum of 32kb, when called recursively
for a directory tree the memory consumption can add up - nearly 300kb
during perf start-up when processing modules. Add a stack allocated
variant of readdir sized a little more than 1kb.

As getdents64 may be missing from libc, add support using syscall. As
the system call number maybe missing, add #defines for those.

Note, an earlier version of this patch had a feature test for
getdents64 but there were problems on certains distros where
getdents64 would be #define renamed to getdents breaking the code. The
syscall use was made uncondtional to work around this. There is
context in:
https://lore.kernel.org/lkml/[email protected]/

Signed-off-by: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>

show more ...

tools: Drop nonsensical -O6

-O6 is very much not-a-thing. Really, this should've been dropped
entirely in 49b3cd306e60b9d8 ("tools: Set the maximum optimization level
according to the compiler being

tools: Drop nonsensical -O6

-O6 is very much not-a-thing. Really, this should've been dropped
entirely in 49b3cd306e60b9d8 ("tools: Set the maximum optimization level
according to the compiler being used") instead of just passing it for
not-Clang.

Just collapse it down to -O3, instead of "-O6 unless Clang, in which case
-O3".

GCC interprets > -O3 as -O3. It doesn't even interpret > -O3 as -Ofast,
which is a good thing, given -Ofast has specific (non-)requirements for
code built using it. So, this does nothing except look a bit daft.

Remove the silliness and also save a few lines in the Makefiles accordingly.

Reviewed-by: Ian Rogers <[email protected]>
Reviewed-by: Jesper Juhl <[email protected]>
Signed-off-by: Sam James <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/4f01524fa4ea91c7146a41e26ceaf9dae4c127e4.1725821201.git.sam@gentoo.org
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Add dependency test to install_headers

Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids h

tools lib api: Add dependency test to install_headers

Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Clean up install_headers

Add missing backslash that caused an install command to always appear
in build output. Make the install headers more specific.

Signed-off-by: Ian Rogers <iro

tools lib api: Clean up install_headers

Add missing backslash that caused an install command to always appear
in build output. Make the install headers more specific.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Add missing install headers

Headers necessary for the perf build.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <

tools lib api: Add missing install headers

Headers necessary for the perf build.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Add install target

This allows libapi to be installed as a dependency.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cmc: Alexander Shis

tools lib api: Add install target

This allows libapi to be installed as a dependency.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cmc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Cc: nicolas schier <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

kbuild: replace $(if A,A,B) with $(or A,B)

$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.

Covert as follows:

$(if A,A,B) --> $(or A,B)

This patch a

kbuild: replace $(if A,A,B) with $(or A,B)

$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.

Covert as follows:

$(if A,A,B) --> $(or A,B)

This patch also converts:

$(if A, A, B) --> $(or A, B)

Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".

Anyway, preceding spaces are not significant in the code hunks I touched.

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tools lib api: Fix make DEBUG=1 build

Do not use -D_FORTIFY_SOURCE=2 for DEBUG build as it seems to mess up
with debuginfo, which results in bad gdb experience.

We already do that for tools/perf/.

tools lib api: Fix make DEBUG=1 build

Do not use -D_FORTIFY_SOURCE=2 for DEBUG build as it seems to mess up
with debuginfo, which results in bad gdb experience.

We already do that for tools/perf/.

Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

perf tools: Robustify detection of clang binary

Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing

perf tools: Robustify detection of clang binary

Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing for the existence of __clang__ macro in the list of compiler
defined macros.

Signed-off-by: David Carrillo-Cisneros <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib: Allow external definition of CC, AR and LD

Use already defined values for CC, AR and LD when available.

Signed-off-by: David Carrillo-Cisneros <[email protected]>
Acked-by: Jiri Olsa <j

tools lib: Allow external definition of CC, AR and LD

Use already defined values for CC, AR and LD when available.

Signed-off-by: David Carrillo-Cisneros <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools: Set the maximum optimization level according to the compiler being used

To avoid this when using clang:

warning: optimization level '-O6' is not supported; using '-O3' instead

Cc: Adrian

tools: Set the maximum optimization level according to the compiler being used

To avoid this when using clang:

warning: optimization level '-O6' is not supported; using '-O3' instead

Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

make use of make variable CURDIR instead of calling pwd

make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by

make use of make variable CURDIR instead of calling pwd

make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.

Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Michal Marek <[email protected]>

show more ...

tools lib api fs: Use str_error_r()

To make it portable to non-glibc systems, that follow the XSI variant
instead of the GNU specific one that gets in place when _GNU_SOURCE is
defined.

Cc: Adrian

tools lib api fs: Use str_error_r()

To make it portable to non-glibc systems, that follow the XSI variant
instead of the GNU specific one that gets in place when _GNU_SOURCE is
defined.

Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Respect WERROR=0 for build

This enables the workaround for compilers that generate warnings when
compiling libapi.

Signed-off-by: Chris Phlipot <[email protected]>
Cc: Peter Zijlst

tools lib api: Respect WERROR=0 for build

This enables the workaround for compilers that generate warnings when
compiling libapi.

Signed-off-by: Chris Phlipot <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Respect CROSS_COMPILE for the linker

This fixes cross compilation of libapi.

Signed-off-by: Lucas Stach <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: kernel@pengutron

tools lib api: Respect CROSS_COMPILE for the linker

This fixes cross compilation of libapi.

Signed-off-by: Lucas Stach <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools: Move utilities.mak from perf to tools/scripts/

As it is used by several other tools, better move it outside tools/perf.

Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <jolsa@kerne

tools: Move utilities.mak from perf to tools/scripts/

As it is used by several other tools, better move it outside tools/perf.

Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Add debug output support

Adding support for warning/info/debug output within libapi code. Adding
following macros:

pr_warning(fmt, ...)
pr_info(fmt, ...)
pr_debug(fmt, ...)

Al

tools lib api: Add debug output support

Adding support for warning/info/debug output within libapi code. Adding
following macros:

pr_warning(fmt, ...)
pr_info(fmt, ...)
pr_debug(fmt, ...)

Also adding libapi_set_print function to set above functions. This will
be used in perf to set standard debug handlers for libapi.

Adding 2 header files:
debug.h
- to be used outside libapi, contains
libapi_set_print interface

debug-internal.h
- to be used within libapi, contains
pr_warning/pr_info/pr_debug definitions

Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools build: Build fixdep helper from perf and basic libs

Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the bui

tools build: Build fixdep helper from perf and basic libs

Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.

Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools build: Add Makefile.include

To ease up build framework code setup for users.

More shared code will be added in the following patches.

Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ah

tools build: Add Makefile.include

To ease up build framework code setup for users.

More shared code will be added in the following patches.

Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib: Improve clean target

The clean targets miss some .cmd and .d files.

Signed-off-by: Riku Voipio <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: linux-kbuild@vger.

tools lib: Improve clean target

The clean targets miss some .cmd and .d files.

Signed-off-by: Riku Voipio <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Undefine _FORTIFY_SOURCE before setting it

Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the
built-in, default args. This causes perf builds to fail with:

<comman

tools lib api: Undefine _FORTIFY_SOURCE before setting it

Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the
built-in, default args. This causes perf builds to fail with:

<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
<built-in>: note: this is the location of the previous definition cc1:
all warnings being treated as errors

To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it
in tools/lib/api.

v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1.

Signed-off-by: Bobby Powers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Dirk Gouders <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Rename libapikfs.a to libapi.a

Renaming libapikfs.a to libapi.a, because it's not just 'fs' specific
library now.

Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Sukadev Bhatt

tools lib api: Rename libapikfs.a to libapi.a

Renaming libapikfs.a to libapi.a, because it's not just 'fs' specific
library now.

Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Sukadev Bhattiprolu <[email protected]>
Tested-by: Will Deacon <[email protected]>
Cc: Alexis Berlemont <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api: Use tools build framework

Move the libapikfs library building under tools build framework.

Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Sukadev Bhattiprolu <[email protected]

tools lib api: Use tools build framework

Move the libapikfs library building under tools build framework.

Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Sukadev Bhattiprolu <[email protected]>
Tested-by: Will Deacon <[email protected]>
Cc: Alexis Berlemont <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

tools lib api fs: Add tracefs mount helper functions

Since tracefs will now hold the event directory for perf, and even
though by default, debugfs still mounts tracefs on the debugfs/tracing
directo

tools lib api fs: Add tracefs mount helper functions

Since tracefs will now hold the event directory for perf, and even
though by default, debugfs still mounts tracefs on the debugfs/tracing
directory, the system admin may now choose to not mount debugfs and
instead just mount tracefs instead.

Having tracefs helper functions will facilitate having perf look for
tracefs first, and then try debugfs as a fallback.

Signed-off-by: Steven Rostedt <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...