ASoC: ops-test: Add some basic kunit tests for soc-ops

Add some basic kunit tests for some of the ASoC control put and get
helpers. This will assist in doing some refactoring. Note that presently
so

ASoC: ops-test: Add some basic kunit tests for soc-ops

Add some basic kunit tests for some of the ASoC control put and get
helpers. This will assist in doing some refactoring. Note that presently
some tests fail, but the rest of the series will fix these up.

Signed-off-by: Charles Keepax <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: Rename "sh" to "renesas"

Rename the "sh" folder to "renesas" to better reflect the Renesas-specific
drivers.

Signed-off-by: Lad Prabhakar <[email protected]>
Acked-by: K

ASoC: Rename "sh" to "renesas"

Rename the "sh" folder to "renesas" to better reflect the Renesas-specific
drivers.

Signed-off-by: Lad Prabhakar <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: SDCA: add initial module

Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.

Note that the SDCA

ASoC: SDCA: add initial module

Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.

Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.

The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.

The design follows a four-step process:

1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.

2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)

3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.

4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.

Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.

The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.

For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download

Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: intel/sdw-utils: move soundwire machine driver soc ops

Move Intel SoundWire generic machine driver soc ops to common place
so that it can be used by other platform machine driver.

Link: https

ASoC: intel/sdw-utils: move soundwire machine driver soc ops

Move Intel SoundWire generic machine driver soc ops to common place
so that it can be used by other platform machine driver.

Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: core: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that

ASoC: core: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.

Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol

Add a new snd-soc-card KUnit test with a simple test case for
snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked().

S

ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol

Add a new snd-soc-card KUnit test with a simple test case for
snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked().

Signed-off-by: Richard Fitzgerald <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: Add support for Loongson I2S controller

Loongson I2S controller is found on 7axxx/2kxxx chips from loongson,
it is a PCI device with two private DMA controllers, one for playback,
the other fo

ASoC: Add support for Loongson I2S controller

Loongson I2S controller is found on 7axxx/2kxxx chips from loongson,
it is a PCI device with two private DMA controllers, one for playback,
the other for capture.

The driver supports the use of DTS or ACPI to describe device resources.

Signed-off-by: Yingkun Meng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: starfive: Add JH7110 TDM driver

Add tdm driver support for the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <[email protected]>
Reviewed-by: Claudiu Beznea <claudiu.beznea@micro

ASoC: starfive: Add JH7110 TDM driver

Add tdm driver support for the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: Add Google Chameleon v3 i2s driver

Add driver for the i2s IP present on Google Chameleon v3

Signed-off-by: Paweł Anikiel <[email protected]
Link: https://lore.kernel.org/r/20230508113037.13762

ASoC: Add Google Chameleon v3 i2s driver

Add driver for the i2s IP present on Google Chameleon v3

Signed-off-by: Paweł Anikiel <[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]

show more ...

ASoC: apple: mca: Start new platform driver

Add ASoC platform driver for the MCA peripheral found on Apple M1 and
other chips.

Signed-off-by: Martin Povišer <[email protected]>
Link: https://lo

ASoC: apple: mca: Start new platform driver

Add ASoC platform driver for the MCA peripheral found on Apple M1 and
other chips.

Signed-off-by: Martin Povišer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: Makefile: Fix simultaneous build of KUNIT tests

Using obj-$() := instead of obj-$() += leads to the latter assignment
overwriting earlier value. Fix this by using incremental assignment to
add

ASoC: Makefile: Fix simultaneous build of KUNIT tests

Using obj-$() := instead of obj-$() += leads to the latter assignment
overwriting earlier value. Fix this by using incremental assignment to
add additional objects to build.

Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: soc-utils: Add kunit test for snd_soc_tdm_params_to_bclk()

Create a new kunit test for soc-utils and use it to test
snd_soc_tdm_params_to_bclk().

The test uses a table of values to avoid the

ASoC: soc-utils: Add kunit test for snd_soc_tdm_params_to_bclk()

Create a new kunit test for soc-utils and use it to test
snd_soc_tdm_params_to_bclk().

The test uses a table of values to avoid the possibility that an
on-the-fly generator contains the same algorithmic error as the
function-under-test and so fails to detect a bug.

There is no need to test every possible combination of values.
Enough test cases are included to give confidence that the function
is producing the correct results.

Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: topology: adhere to KUNIT formatting standard

Drop 'S' from end of SND_SOC_TOPOLOGY_KUNIT_TESTS inorder to adhear to
the KUNIT *_KUNIT_TEST config name format.

Signed-off-by: Nico Pache <npa

ASoC: topology: adhere to KUNIT formatting standard

Drop 'S' from end of SND_SOC_TOPOLOGY_KUNIT_TESTS inorder to adhear to
the KUNIT *_KUNIT_TEST config name format.

Signed-off-by: Nico Pache <[email protected]>
Link: https://lore.kernel.org/r/dcf79e592f9a7e14483dde32ac561f6af2632e50.1618388989.git.npache@redhat.com
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: topology: KUnit: Add KUnit tests passing various arguments to snd_soc_tplg_component_load

In order to ensure correct behaviour of topology API, add unit tests
exercising topology functionality

ASoC: topology: KUnit: Add KUnit tests passing various arguments to snd_soc_tplg_component_load

In order to ensure correct behaviour of topology API, add unit tests
exercising topology functionality.

Start with adding cases for passing various arguments to
snd_soc_tplg_component_load as it is part of exposed topology API.

First test case adds test passing NULL component as argument.
Following one adds test case for passing NULL ops as argument.
Finally add test case passing NULL fw as argument.

Signed-off-by: Amadeusz Sławiński <[email protected]>
Tested-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: remove zte zx drivers

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Arnd Berg

ASoC: remove zte zx drivers

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: remove sirf prima/atlas drivers

The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Barry Song

ASoC: remove sirf prima/atlas drivers

The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Barry Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: txx9: Remove driver

CPU support for TX49xx is getting removed, so remove sound support for it.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Link: https://lore.kernel.org/r/2

ASoC: txx9: Remove driver

CPU support for TX49xx is getting removed, so remove sound support for it.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: soc-component: merge soc-io.c into soc-component.c

soc-io.c has snd_soc_component_xxx() functions for I/O.
We have soc-componennt.c for it.
Let's merge soc-io.c into soc-component.c

By this p

ASoC: soc-component: merge soc-io.c into soc-component.c

soc-io.c has snd_soc_component_xxx() functions for I/O.
We have soc-componennt.c for it.
Let's merge soc-io.c into soc-component.c

By this patch, original soc-io.c functions start to use
soc_component_err() when error case.

Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: add soc-card.c

Current ALSA SoC has some snd_soc_card_xxx() functions,
and card->xxx() callbacks.
But, it is implemented randomly at random place.

To collect all card related functions into o

ASoC: add soc-card.c

Current ALSA SoC has some snd_soc_card_xxx() functions,
and card->xxx() callbacks.
But, it is implemented randomly at random place.

To collect all card related functions into one place,
this patch creats new soc-card.c.

Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: add soc-link.c

Current ALSA SoC has many dai_link->xxx() functions.
But, it is implemented randomly at random place.

This patch creats new soc-link.c and collect dai_link related
operation in

ASoC: add soc-link.c

Current ALSA SoC has many dai_link->xxx() functions.
But, it is implemented randomly at random place.

This patch creats new soc-link.c and collect dai_link related
operation into it.

Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: remove w90x900/nuc900 platform drivers

The ARM w90x900 platform is getting removed, so this driver is obsolete.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Mark Brown <broonie@kern

ASoC: remove w90x900/nuc900 platform drivers

The ARM w90x900 platform is getting removed, so this driver is obsolete.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: add soc-component.c

ALSA SoC has many snd_soc_component_xxx(), but these are randomly
located in many files. Because of it, code is difficult to read.
This patch creates new soc-component.c, a

ASoC: add soc-component.c

ALSA SoC has many snd_soc_component_xxx(), but these are randomly
located in many files. Because of it, code is difficult to read.
This patch creates new soc-component.c, and moves existing
snd_soc_component_xxx() into it.
But not yet fully. We need more cleanup it.

Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: add soc-dai.c

Current ALSA SoC has many snd_soc_dai_xxx() function which is
using dai->driver->ops->xxx.
But, some of them are implemented as snd_soc_dai_xxx(),
but others are directly using d

ASoC: add soc-dai.c

Current ALSA SoC has many snd_soc_dai_xxx() function which is
using dai->driver->ops->xxx.
But, some of them are implemented as snd_soc_dai_xxx(),
but others are directly using dai->driver->ops->xxx.
Because of it, the code is not easy to read.

This patch creats new soc-dai.c and moves snd_soc_dai_xxx()
functions into it.
One exception is snd_soc_dai_is_dummy() which is based on
soc-utils local variable. We need to keep it as-is there.

Others which is directly using dai->driver->ops->xxx will be
implemented at soc-dai.c by incremental patches.

Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: SOF: Add Build support for SOF core and Intel drivers

Build SOF core and Intel-specific drivers.

Signed-off-by: Liam Girdwood <[email protected]>
Signed-off-by: Pierre-Louis Bos

ASoC: SOF: Add Build support for SOF core and Intel drivers

Build SOF core and Intel-specific drivers.

Signed-off-by: Liam Girdwood <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

show more ...

ASoC: sprd: Add Spreadtrum audio DMA platfrom driver

The Spreadtrum DMA engine uses the link-list mode to support audio playback
or capture, thus this patch adds audio DMA platform support for CPU D

ASoC: sprd: Add Spreadtrum audio DMA platfrom driver

The Spreadtrum DMA engine uses the link-list mode to support audio playback
or capture, thus this patch adds audio DMA platform support for CPU DAI to
trigger DMA link-list transfer.

Signed-off-by: Baolin Wang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

show more ...