arm64: dts: qcom: sm8750: Add MTP and QRD boards

Add MTP and QRD dts files for SM8750 describing board clocks, regulators,
gpio keys, etc.

Signed-off-by: Melody Olvera <[email protected]>
Re

arm64: dts: qcom: sm8750: Add MTP and QRD boards

Add MTP and QRD dts files for SM8750 describing board clocks, regulators,
gpio keys, etc.

Signed-off-by: Melody Olvera <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[bjorn: Polished subject]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

Add an initial devicetree for the Huawei Matebook E Go, which is based on
sc8280xp.

There are 3 variants, Huawei released first 2 at

arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

Add an initial devicetree for the Huawei Matebook E Go, which is based on
sc8280xp.

There are 3 variants, Huawei released first 2 at the same time.
Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
Huawei Matebook E Go([email protected]), codename is gaokun3.
Huawei Matebook E Go 2023([email protected]).

We add support for the latter two variants.

This work started by Tianyu Gao and Xuecong Chen, they made the
devicetree based on existing work(i.e. the Lenovo X13s and the
Qualcomm CRD), it can boot with framebuffer.

Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts

Later, I got my device, I continue their work.

Supported features:
- adsp
- bluetooth (connect issue)
- charge (with a lower power)
- framebuffer
- gpu
- keyboard (via internal USB)
- pcie devices (wifi and nvme, no modem)
- speakers and microphones
- tablet mode switch
- touchscreen
- usb
- volume key and power key

Some key features not supported yet:
- battery and charger information report (EC driver required)
- built-in display (cannot enable backlight yet)
- charging thresholds control (EC driver required)
- camera
- LID switch detection (EC driver required)
- USB Type-C altmode (EC driver required)
- USB Type-C PD (EC driver required)

I have finished the EC driver, once this series are upstreamed,
I will submit a series of patches to enable EC support.

Co-developed-by: Tianyu Gao <[email protected]>
Signed-off-by: Tianyu Gao <[email protected]>
Co-developed-by: Xuecong Chen <[email protected]>
Signed-off-by: Xuecong Chen <[email protected]>
Signed-off-by: Pengyu Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: Add Xiaomi Redmi 5A

Add initial support for Xiaomi Redmi 5A (riva).

Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mai

arm64: dts: qcom: Add Xiaomi Redmi 5A

Add initial support for Xiaomi Redmi 5A (riva).

Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023

Device tree for the Microsoft Windows Dev Kit 2023. This work
is based on the initial work of Merck Hung <[email protected]>.

Origi

arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023

Device tree for the Microsoft Windows Dev Kit 2023. This work
is based on the initial work of Merck Hung <[email protected]>.

Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts

The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/

Supported features:
- USB type-c and type-a ports
- minidp connector
- built-in r8152 Ethernet adapter
- PCIe devices
- nvme
- ath11k WiFi (WCN6855)
- WCN6855 Bluetooth
- A690 GPU
- ADSP and CDSP
- GPIO keys
- Audio definition (works via USB)

Signed-off-by: Jens Glathe <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/20241202-jg-blackrock-for-upstream-v9-3-385bb46ca122@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14

Introduce device tree for the HP Omnibook X Laptop 14-fe0750ng
(hp-omnibook-x14). It is a Laptop based on the Qualcomm Snapdragon
X

arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14

Introduce device tree for the HP Omnibook X Laptop 14-fe0750ng
(hp-omnibook-x14). It is a Laptop based on the Qualcomm Snapdragon
X Elite SoC. There seem to be other SKUs, some with Wifi-7 (WCN7850)
instead of Wifi-6E (WCN6855). This dt explicitly supports WCN6855,
I haven't found a good way yet to describe both.

PDF link: https://www8.hp.com/h20195/V2/GetPDF.aspx/c08989140

Supported features:

- Keyboard (no function keys though)
- Display
- PWM brightness control (works via brightnessctl)
- Touchpad
- Touchscreen
- PCIe ports (pcie4, pcie6a)
- USB type-c, type-a
- WCN6855 Wifi-6E
- WCN6855 Bluetooth
- ADSP and CDSP
- X1 GPU
- GPIO Keys (Lid switch)
- Audio definition (works via USB)

Signed-off-by: Jens Glathe <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/20241202-hp-omnibook-x14-v3-3-0fcd96483723@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: qcs8300: add base QCS8300 RIDE board

Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
UFS and booting to shell with uart console.

Written with help from Tin

arm64: dts: qcom: qcs8300: add base QCS8300 RIDE board

Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
UFS and booting to shell with uart console.

Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
(added ufs, adsp and gpdsp nodes).

Signed-off-by: Jingyi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: qcs615: add base RIDE board

Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with uart console.

Written with help from Tingguo Cheng (a

arm64: dts: qcom: qcs615: add base RIDE board

Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with uart console.

Written with help from Tingguo Cheng (added regulator nodes).

Signed-off-by: Lijuan Gao <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-4-9dde8d7b80b0@quicinc.com
[bjorn: Fix subject]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support

Add initial device tree support for the Qualcomm IPQ5424 SoC and
rdp466 board.

Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc

arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support

Add initial device tree support for the Qualcomm IPQ5424 SoC and
rdp466 board.

Signed-off-by: Sricharan Ramabadhran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sar2130p: add QAR2130P board file

Add board DT file for the Qualcomm Snapdragon AR2 Gen1 Smart Viewer
Development Kit.

Signed-off-by: Dmitry Baryshkov <[email protected]

arm64: dts: qcom: sar2130p: add QAR2130P board file

Add board DT file for the Qualcomm Snapdragon AR2 Gen1 Smart Viewer
Development Kit.

Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows

Add initial support for x1e001de devkit platform. This includes:

-DSPs
-Ethernet (RTL8125BG) over the pcie 5 instance.
-NVme
-Wifi
-USB-

arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows

Add initial support for x1e001de devkit platform. This includes:

-DSPs
-Ethernet (RTL8125BG) over the pcie 5 instance.
-NVme
-Wifi
-USB-C ports

Link: https://www.qualcomm.com/news/releases/2024/05/qualcomm-accelerates-development-for-copilot--pcs-with-snapdrago
Signed-off-by: Sibi Sankar <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Tested-by: Jens Glathe <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso

Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / ad

arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso

Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / address / cell size change needs to
be applied to convert.

Tested-by: Bryan O'Donoghue <[email protected]> # rb3
Signed-off-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-2-cdff2f1a5792@linaro.org
[bjorn: Corrected up makefile syntax, added missing cells for cci_i2c1]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo

Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / address

arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo

Convert the navigation / camera mezzanine from its own dts to a dtso. A
small amount of additional includes / address / cell size change needs to
be applied to convert.

Tested-by: Bryan O'Donoghue <[email protected]> # rb5
Signed-off-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-1-cdff2f1a5792@linaro.org
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards

Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The
QCS9100 is a variant of the SA8775p, and they

arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards

Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The
QCS9100 is a variant of the SA8775p, and they are fully compatible with
each other. The QCS9100 Ride/Ride Rev3 board is essentially the same as
the SA8775p Ride/Ride Rev3 board, with the QCS9100 SoC mounted instead
of the SA8775p.

Signed-off-by: Tengfei Fan <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sm7325: Add device-tree for Nothing Phone 1

Add device tree for the Nothing Phone 1 (nothing,spacewar) smartphone
which is based on the SM7325 SoC.

Supported features are, as of n

arm64: dts: qcom: sm7325: Add device-tree for Nothing Phone 1

Add device tree for the Nothing Phone 1 (nothing,spacewar) smartphone
which is based on the SM7325 SoC.

Supported features are, as of now:
* USB & UFS
* Debug UART
* Display via SimpleFB
* Power & volume buttons
* PMIC GLink
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* WiFi & Bluetooth
* IPA
* VPU Iris (Venus)
* NFC
* Flash/torch LED
* RTC
* Device-specific thermals
* Various plumbing like regulators, i2c, spi, cci, etc

Signed-off-by: Eugene Lepshy <[email protected]>
Co-developed-by: Danila Tikhonov <[email protected]>
Signed-off-by: Danila Tikhonov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345

Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
on X1E80100.

Working:
* Touchpad
* Keyboard (only post suspend&res

arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345

Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
on X1E80100.

Working:
* Touchpad
* Keyboard (only post suspend&resume, i2c-hid patch required [1])
* Touchscreen
* eDP (low-res IPS, OLED) with brightness control
* NVME
* USB Type-C ports in USB2/USB3 (one orientation)
* WiFi
* GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
* Lid switch
* Sleep/suspend, nothing visibly broken on resume

Not working:
* Speakers (WIP, pin guessing, x4 WSA8845)
* Microphones (WIP, pin guessing, dual array)
* Fingerprint Reader (WIP, USB MP with ptn3222)
* USB as DP/USB3 (WIP, PS8830 based)
* Camera (Likely OV01A10)
* EC over i2c

Should be working, but cannot be tested due to lack of hw:
* higher res IPS panel

[1] https://lore.kernel.org/all/[email protected]/

Signed-off-by: Aleksandrs Vinarskis <[email protected]>
Tested-by: Stefan Schmidt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G

Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.

It enables the support for Wi-Fi, NVMe, the two USB Type-

arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G

Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.

It enables the support for Wi-Fi, NVMe, the two USB Type-C ports,
Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets
or USB audio), external display via DisplayPort over Type-C (only
the bottom USB Type-C port is working so far), charging, the Surface
Aggregator Module (SAM) to get keyboard and touchpad working with
Surface Type Cover accessories.

Some key features not supported yet:
- built-in display (but software fallback is working with efifb
when blacklisting the msm module)
- built-in display touchscreen
- external display with the top USB Type-C port
- speakers and microphones
- physical volume up and down keys
- LID switch detection

This devicetree is based on the other SC8280XP ones, for the Lenovo
ThinkPad X13s and the Qualcomm CRD.

Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jérôme de Bretagne <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6

Add support for the aforementioned laptop. That includes:

- input methods, incl. lid switch (keyboard needs the pdc
wakeup-parent removal hack..

arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6

Add support for the aforementioned laptop. That includes:

- input methods, incl. lid switch (keyboard needs the pdc
wakeup-parent removal hack..)
- NVMe, WiFi
- USB-C ports
- GPU, display
- DSPs

Notably, the USB-A ports on the side are depenedent on the USB
multiport controller making it upstream.

At least one of the eDP panels used (non-touchscreen) identifies as
BOE 0x0b66.

See below for the hardware description from the OEM.

Link: https://www.lenovo.com/us/en/p/laptops/thinkpad/thinkpadt/lenovo-thinkpad-t14s-gen-6-(14-inch-snapdragon)/len101t0099
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices

Add support for Surface Laptop 7 machines, based on X1E80100.

The feature status is mostly on par with other X Elite machines,
no

arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices

Add support for Surface Laptop 7 machines, based on X1E80100.

The feature status is mostly on par with other X Elite machines,
notably lacking:

- USB-A and probably USB-over-Surface-connector (pending NXP retimer
support)
- SD card reader (Realtek RTS5261 connected over PCIe)
- Touchscreen and touchpad support (hid-over-SPI [1])
- Audio (a quick look suggests the setup is very close to the one in
X1E CRD)

The two Surface Laptop 7 SKUs (13.8" and 15") only have very minor
differences, amounting close to none on the software side. Even the
MBN firmware files and ACPI tables are shared between the two machines.

With that in mind, support is added for both, although only the larger
one was physically tested. Display differences will be taken care of
through fused-in EDID and other matters should be solved within the
EC and boot firmware.

[1] https://www.microsoft.com/en-us/download/details.aspx?id=103325

Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8916-samsung-j3ltetw: Add initial device tree

The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3
SM-J320YZ smartphone released in 2016.

Add a device tree for

arm64: dts: qcom: msm8916-samsung-j3ltetw: Add initial device tree

The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3
SM-J320YZ smartphone released in 2016.

Add a device tree for SM-J320YZ with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5703 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- Touchscreen
- Accelerometer

There are different variants of J3, with some differences in MUIC, sensor,
NFC and touch key I2C buses.

The common parts are shared in msm8916-samsung-j3-common.dtsi to reduce
duplication.

Signed-off-by: Lin, Meng-Bo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8939-wingtech-wt82918: Add Lenovo Vibe K5 devices

This commit introduces multiple hardware variants of Lenovo Vibe K5.

- A6020a40 (msm8929-wingtech-wt82918hd)
- A6020a46/A6020l

arm64: dts: qcom: msm8939-wingtech-wt82918: Add Lenovo Vibe K5 devices

This commit introduces multiple hardware variants of Lenovo Vibe K5.

- A6020a40 (msm8929-wingtech-wt82918hd)
- A6020a46/A6020l36 (msm8939-wingtech-wt82918)
- A6020a40 S616 H39 (msm8939-wingtech-wt82918hd)

These devices are added with support for many features, notably:

- Basic features like USB, mmc/sd storage, wifi, buttons, leds;
- Accelerometer;
- Touchscreen;
- Sound and modem.

Note that "HD" variant of K5 is based on msm8929 which is a lower bin
of msm8939 SoC. A simple dtsi is added for this soc along with the new
devices.

Unfortunately, despite the heavy similarities, the combination of minor
differences between variants make them incompatible between each other.

Signed-off-by: Adam Słaboń <[email protected]>
[Nikita: Minor cleanup, commit message]
Signed-off-by: Nikita Travkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8916-wingtech-wt865x8: Add Lenovo A6000/A6010

Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010
(wt86528), which are MSM8916-based devices. These devices are q

arm64: dts: qcom: msm8916-wingtech-wt865x8: Add Lenovo A6000/A6010

Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010
(wt86528), which are MSM8916-based devices. These devices are quite
similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi.

Lenovo A6000 (wt86518):
- storage (eMMC and uSD card);
- usb in peripheral mode;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- battery and charger.

Lenovo A6010 (wt86528):
- storage (eMMC and uSD card);
- usb with extcon;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- leds;
- battery;

Signed-off-by: Anton Bambura <[email protected]>
Co-developed-by: Stephan Gerhold <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
[Nikita: minor cleanup]
Signed-off-by: Nikita Travkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815)

To make it easier for downstream projects and avoid duplication of work.
Makes the device bootable and enables all buttons, hall s

arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815)

To make it easier for downstream projects and avoid duplication of work.
Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card.

Signed-off-by: Alexander Reimelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE

Add initial device-tree for LG Leon LTE (lg-c50), currently supported
features:
- eMMC;
- MicroSD;
- usb in peripheral mode;
- WiFi/

arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE

Add initial device-tree for LG Leon LTE (lg-c50), currently supported
features:
- eMMC;
- MicroSD;
- usb in peripheral mode;
- WiFi/BT;
- vibration;
- keys.

Signed-off-by: Anton Bambura <[email protected]>
Signed-off-by: Nikita Travkin <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: msm8916-lg-m216: Add initial device tree

This commit adds initial support for the LG K10 smartphone.

Support for the following features is included:

- Serial
- Keys
- Battery and

arm64: dts: qcom: msm8916-lg-m216: Add initial device tree

This commit adds initial support for the LG K10 smartphone.

Support for the following features is included:

- Serial
- Keys
- Battery and charger
- Accelerometer, magnetometer
- Touchscreen
- Sound and modem
- Haptic

Signed-off-by: Cristian Cozzolino <[email protected]>
[Nikita: Minor cleanup]
Signed-off-by: Nikita Travkin <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...

arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree

Add an initial devicetree for the Lenovo Yoga slim 7x with support for
Display, usb, keyboard, touchpad, touchscreen, PMICs, s

arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree

Add an initial devicetree for the Lenovo Yoga slim 7x with support for
Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu,
NVMe and remoteprocs.

Signed-off-by: Srinivas Kandagatla <[email protected]>
Tested-by: Rob Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

show more ...