ARM: dts: apalis/colibri-imx6: Add support for v1.2

Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.

Accurately d

ARM: dts: apalis/colibri-imx6: Add support for v1.2

Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.

Accurately describe the new hardware.

v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi

v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi

For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.

The original DTS can be used for modules up to and including v1.1.

Signed-off-by: Ernest Van Hoecke <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6ul: Add Variscite Concerto board support

Add support for the Variscite Concerto Carrier Board with:

- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not co

ARM: dts: imx6ul: Add Variscite Concerto board support

Add support for the Variscite Concerto Carrier Board with:

- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC

Product Page: https://www.variscite.com/product/single-board-computers/concerto-board

This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.

Signed-off-by: Antonin Godard <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx: Add devicetree for Kobo Clara 2E

Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an

ARM: dts: imx: Add devicetree for Kobo Clara 2E

Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.

Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen

Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.

Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier board

Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial

ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier board

Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.

All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.

Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Christoph Niedermaier <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6q-lxr: Add board support

The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM
from Phytec.

Add a devicetree description for this board.

Signed-off-by: Fabio Estevam <fe

ARM: dts: imx6q-lxr: Add board support

The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM
from Phytec.

Add a devicetree description for this board.

Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6qdl-kontron-samx6i: add actual device trees

For now, there wasn't any in-tree users of the dtsi files for the
Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a
Ko

ARM: dts: imx6qdl-kontron-samx6i: add actual device trees

For now, there wasn't any in-tree users of the dtsi files for the
Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a
Kontron SMARC Eval 2.0 Carrier.

Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6ull: add seeed studio NPi dev board

Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with
512MB RAM and 8GB eMMC or 512MB NAND flash. Development
board comes with either eMMC or

ARM: dts: imx6ull: add seeed studio NPi dev board

Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with
512MB RAM and 8GB eMMC or 512MB NAND flash. Development
board comes with either eMMC or NAND based SoM with peripheral
interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more.

Signed-off-by: Parthiban Nallathambi <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx: Add UNI-T UTi260B thermal camera board

Add DT for the UNI-T UTi260B handheld thermal camera.

Reviewed-by: Stefan Wahren <[email protected]>
Signed-off-by: Sebastian Reichel <sre@kerne

ARM: dts: imx: Add UNI-T UTi260B thermal camera board

Add DT for the UNI-T UTi260B handheld thermal camera.

Reviewed-by: Stefan Wahren <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx53-qsb: add support for the HDMI expander

Add support for the MCIMXHDMICARD expansion card attached to the iMX53
QSB / QSRB platforms. This enables HDMI output on those devices.

Review

ARM: dts: imx53-qsb: add support for the HDMI expander

Add support for the MCIMXHDMICARD expansion card attached to the iMX53
QSB / QSRB platforms. This enables HDMI output on those devices.

Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx: Add support for Apalis Evaluation Board v1.2

Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has

ARM: dts: imx: Add support for Apalis Evaluation Board v1.2

Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has been created which has common hardware configurations for v1.0, v1.1
and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts
files include imx6q-apalis-eval.dtsi.

Versions 1.0 and 1.1 are compatible with each other and should
use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file
should be used.

Reviewed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Hiago De Franco <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

The Sielaff i.MX6 Solo board is used as controller and user interface
in vending machines. It is based on the i.MX6 Solo SoC and features
t

ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board

The Sielaff i.MX6 Solo board is used as controller and user interface
in vending machines. It is based on the i.MX6 Solo SoC and features
the following peripherals and interfaces:

* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC

Signed-off-by: Frieder Schrempf <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx6q: Add Variscite MX6 Custom board support

This patch adds support for the Variscite MX6 SoM Carrier Board.

This Carrier-Board has the following :
- LVDS interface for the VLCD-CAP-GLD

ARM: dts: imx6q: Add Variscite MX6 Custom board support

This patch adds support for the Variscite MX6 SoM Carrier Board.

This Carrier-Board has the following :
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display
- HDMI Connector
- USB Host + USB OTG Connector
- 10/100/1000 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
- RS485 Header
- CAN bus header
- SPI header
- Camera Interfaces header
- OnBoard RTC with Coin Backup battery socket
- RS232 Debug Header (IDC10)
- RS232 DTE

Product Page : https://www.variscite.com/product/single-board-computers/var-mx6customboard

The dts file based on the ones provided by Variscite on their own
kernel, but adapted for mainline.

Cc: Pierluigi Passaro <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53

The SK-ATM0700D4-Plug is an extension board (provided by the same
manufacturer, [1]) which can be connected to the SK-IMX53 pa

ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53

The SK-ATM0700D4-Plug is an extension board (provided by the same
manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The
panel can be connected either using the RGB parallel bus or using the
LVDS connector (recommended). Add DT files describing this "shield",
both RGB and LVDS connections.

[1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64

Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

show more ...

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <[email protected]>
Acked-by: Michal Simek <[email protected]> #Xilinx
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Paul Barker <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: Gregory CLEMENT <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Acked-by: Wei Xu <[email protected]> #hisilicon
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Nick Hawkins <[email protected]>
Acked-by: Baruch Siach <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Acked-by: Andre Przywara <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Acked-by: Peter Rosin <[email protected]>
Acked-by: Jesper Nilsson <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
Acked-by: Florian Fainelli <[email protected]> #broadcom
Acked-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Jisheng Zhang <[email protected]>
Acked-by: Patrice Chotard <[email protected]>
Acked-by: Romain Perier <[email protected]>
Acked-by: Alexandre TORGUE <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Kunihiko Hayashi <[email protected]>
Acked-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Rob Herring <[email protected]>

show more ...