ARM: dts: sunxi: add support for NetCube Systems Kumquat

NetCube Systems Kumquat is a board based on the Allwinner V3s SoC,
including:

- 64MB DDR2 included in SoC
- 10/100 Mbps Ethernet
- USB-C DRD

ARM: dts: sunxi: add support for NetCube Systems Kumquat

NetCube Systems Kumquat is a board based on the Allwinner V3s SoC,
including:

- 64MB DDR2 included in SoC
- 10/100 Mbps Ethernet
- USB-C DRD
- Audio Codec
- Isolated CAN-FD
- ESP32 over SDIO
- 8MB SPI-NOR Flash for bootloader
- I2C EEPROM for MAC addresses
- SDIO Connector for eMMC or SD-Card
- 8x 12/24V IOs, 4x normally open relays
- DS3232 RTC with Battery Backup
- QWIIC connectors for external I2C devices

Signed-off-by: Lukas Schmid <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>

show more ...

ARM: dts: allwinner: Remove accidental suniv duplicates

Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove thes

ARM: dts: allwinner: Remove accidental suniv duplicates

Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.

Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>

show more ...

ARM: dts: sunxi: add support for RerVision A33-Vstar board

RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripher

ARM: dts: sunxi: add support for RerVision A33-Vstar board

RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals:

- MicroSD card slot
- 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin
connector for alternative 5V DC IN)
- OTG-capable microUSB port
- Reserved pads for soldering Li-ion battery and/or 3V RTC battery
- 3 LRADC-attached keys and 2 fixed function power/reset keys
- AP6212 Wi-Fi/BT combo module
- On-board GL850G hub attached to the USB host port of A33, and a
RTL8152 USB Ethernet chip at the downstream of the hub
- Onboard microphone (not supported yet) and headphone jack
- 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as
debug output and others are ignored yet)

Signed-off-by: Icenowy Zheng <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>

show more ...

ARM: dts: sunxi: remove duplicated entries in makefile

During introduction of DTS vendor subdirectories in 724ba6751532, sun8i
section of the makefile got duplicated. Clean that up.

Fixes: 724ba675

ARM: dts: sunxi: remove duplicated entries in makefile

During introduction of DTS vendor subdirectories in 724ba6751532, sun8i
section of the makefile got duplicated. Clean that up.

Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Pavel Löbl <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>

show more ...

ARM: dts: sun5i: Add PocketBook 614 Plus support

What works:

- Serial console
- mmc0, mmc2 (both microSD card slots on the board)
- All buttons (gpio and lradc based)
- Power LED
- PMIC
- RTC
- USB

ARM: dts: sun5i: Add PocketBook 614 Plus support

What works:

- Serial console
- mmc0, mmc2 (both microSD card slots on the board)
- All buttons (gpio and lradc based)
- Power LED
- PMIC
- RTC
- USB OTG/gadgets mode

Signed-off-by: Denis Burkov <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>

show more ...

ARM: dts: sunxi: add support for Anbernic RG-Nano

The Anbernic RG-Nano is a small portable game device based on the
Allwinner V3s SoC. It has GPIO buttons on the face and side for
input, a single mo

ARM: dts: sunxi: add support for Anbernic RG-Nano

The Anbernic RG-Nano is a small portable game device based on the
Allwinner V3s SoC. It has GPIO buttons on the face and side for
input, a single mono speaker, a 240x240 SPI controlled display, a USB-C
OTG port, an SD card slot for booting, and 64MB of RAM included in the
SoC. There does not appear to be a crystal feeding the internal RTC so
it does not keep proper time (for me it ran 8 hours slow in a 24 hour
period). External RTC works just fine.

Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker
- RTC (external RTC)
- USB
- Display

Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>

show more ...

arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices

Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the nec

arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices

Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.

These devices allow various modules to be connected and this enables
users to create out-of-tree device-tree overlays for these modules.

Please note that this change does increase the size of the resulting DTB
by ~30%. For example, with v6.4 increase in size is as follows:

22909 -> 29564 sun8i-h3-orangepi-lite.dtb
24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb
23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb
22969 -> 29537 sun8i-h3-nanopi-m1.dtb
24157 -> 30836 sun8i-h3-nanopi-duo2.dtb
24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb
23472 -> 30037 sun8i-h3-orangepi-one.dtb
24600 -> 31410 sun8i-h3-orangepi-plus.dtb
23618 -> 30230 sun8i-h3-orangepi-2.dtb
22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb
23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb
23113 -> 29699 sun8i-h3-zeropi.dtb
22803 -> 29270 sun8i-h3-nanopi-neo.dtb
24674 -> 31318 sun8i-h3-nanopi-r1.dtb
23477 -> 30038 sun8i-h3-orangepi-pc.dtb
24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb
23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb

Signed-off-by: Felix Moessbauer <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>

show more ...

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .

ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <[email protected]>
Acked-by: Michal Simek <[email protected]> #Xilinx
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Paul Barker <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: Gregory CLEMENT <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Acked-by: Wei Xu <[email protected]> #hisilicon
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Nick Hawkins <[email protected]>
Acked-by: Baruch Siach <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Acked-by: Andre Przywara <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Acked-by: Peter Rosin <[email protected]>
Acked-by: Jesper Nilsson <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
Acked-by: Florian Fainelli <[email protected]> #broadcom
Acked-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Jisheng Zhang <[email protected]>
Acked-by: Patrice Chotard <[email protected]>
Acked-by: Romain Perier <[email protected]>
Acked-by: Alexandre TORGUE <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Kunihiko Hayashi <[email protected]>
Acked-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Rob Herring <[email protected]>

show more ...