sctp: add mutual exclusion in proc_sctp_do_udp_port()

We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:

Oops: general protection fault, p

sctp: add mutual exclusion in proc_sctp_do_udp_port()

We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:

Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653
Call Trace:
<TASK>
udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181
sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930
proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553
proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601
iter_file_splice_write+0x91c/0x1150 fs/splice.c:738
do_splice_from fs/splice.c:935 [inline]
direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158
splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102
do_splice_direct_actor fs/splice.c:1201 [inline]
do_splice_direct+0x174/0x240 fs/splice.c:1227
do_sendfile+0xafd/0xe50 fs/read_write.c:1368
__do_sys_sendfile64 fs/read_write.c:1429 [inline]
__se_sys_sendfile64 fs/read_write.c:1415 [inline]
__x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]

Fixes: 046c052b475e ("sctp: enable udp tunneling socks")
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/[email protected]/T/#u
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Xin Long <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.

- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).

The 'net' structure can be obtained from the table->data using
container_of().

Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used.

Fixes: d1e462a7a5f3 ("sctp: add probe_interval in sysctl and sock/asoc/transport")
Cc: [email protected]
Link: https://lore.kernel.org/[email protected] [1]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: sysctl: udp_port: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsiste

sctp: sysctl: udp_port: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.

- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).

The 'net' structure can be obtained from the table->data using
container_of().

Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.

Fixes: 046c052b475e ("sctp: enable udp tunneling socks")
Cc: [email protected]
Link: https://lore.kernel.org/[email protected] [1]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: sysctl: auth_enable: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsi

sctp: sysctl: auth_enable: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.

- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).

The 'net' structure can be obtained from the table->data using
container_of().

Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.

Fixes: b14878ccb7fa ("net: sctp: cache auth_enable per endpoint")
Cc: [email protected]
Link: https://lore.kernel.org/[email protected] [1]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: sysctl: rto_min/max: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsi

sctp: sysctl: rto_min/max: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.

- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).

The 'net' structure can be obtained from the table->data using
container_of().

Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.

Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")
Cc: [email protected]
Link: https://lore.kernel.org/[email protected] [1]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inc

sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy

As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:

- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.

- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).

The 'net' structure can be obtained from the table->data using
container_of().

Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used.

Fixes: 3c68198e7511 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Cc: [email protected]
Link: https://lore.kernel.org/[email protected] [1]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sysctl: treewide: constify the ctl_table argument of proc_handlers

const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ct

sysctl: treewide: constify the ctl_table argument of proc_handlers

const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.

This patch has been generated by the following coccinelle script:

```
virtual patch

@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@

int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);

@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@

int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }

@r3@
identifier func;
@@

int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);

@r4@
identifier func, ctl;
@@

int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);

@r5@
identifier func, write, buffer, lenp, ppos;
@@

int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);

```

* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.

* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.

Co-developed-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Thomas Weißschuh <[email protected]>
Co-developed-by: Joel Granados <[email protected]>
Signed-off-by: Joel Granados <[email protected]>

show more ...

net: Remove ctl_table sentinel elements from several networking subsystems

This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sent

net: Remove ctl_table sentinel elements from several networking subsystems

This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)

To avoid lots of small commits, this commit brings together network
changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK
LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP
PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and
NETWORKING [IPSEC]

* Remove sentinel element from ctl_table structs.
* Replace empty array registration with the register_net_sysctl_sz call
in llc_sysctl_init
* Replace the for loop stop condition that tests for procname == NULL
with one that depends on array size in sctp_sysctl_net_register
* Remove instances where an array element is zeroed out to make it look
like a sentinel in xfrm_sysctl_init. This is not longer needed and is
safe after commit c899710fe7f9 ("networking: Update to
register_net_sysctl_sz") added the array size to the ctl_table
registration
* Use a table_size variable to keep the value of ARRAY_SIZE

Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sysctl: treewide: constify ctl_table_header::ctl_table_arg

To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the

sysctl: treewide: constify ctl_table_header::ctl_table_arg

To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.

Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.

Signed-off-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

networking: Update to register_net_sysctl_sz

Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments wi

networking: Update to register_net_sysctl_sz

Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.

We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.

An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
include/net/ipv6.h
net/ipv6/icmp.c
net/ipv6/route.c
net/ipv6/sysctl_net_ipv6.c

Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>

show more ...

sctp: sysctl: make extra pointers netns aware

Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp

sctp: sysctl: make extra pointers netns aware

Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp.rto_max to any value smaller than
init_net.sctp.rto_min.

For instance,
Host:
sudo sysctl net.sctp.rto_min
net.sctp.rto_min = 1000

Container:
echo 100 > /mnt/proc-net/sctp/rto_min
echo 400 > /mnt/proc-net/sctp/rto_max
echo: write error: Invalid argument

This is caused by the check made from this'commit 4f3fdf3bc59c
("sctp: add check rto_min and rto_max in sysctl")'
When validating the input value, it's always referring the boundary
value set for the init_net namespace.

Having container's rto_max smaller than host's init_net.sctp.rto_min
does make sense. Consider that the rto between two containers on the
same host is very likely smaller than it for two hosts.

So to fix this problem, as suggested by Marcelo, this patch makes the
extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point
to the corresponding variables from the newly created net namespace while
the new net namespace is being registered in sctp_sysctl_net_register.

Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Firo Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: add sysctl net.sctp.l3mdev_accept

This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.

Signed-off-by: Xin Long <[email protected]>
S

sctp: add sysctl net.sctp.l3mdev_accept

This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add probe_interval in sysctl and sock/asoc/transport

PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it

sctp: add probe_interval in sysctl and sock/asoc/transport

PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it
can't be less than 5000 if it's not 0.

All asoc/transport's PLPMTUD in a new socket will be enabled by default.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: fix the proc_handler for sysctl encap_port

proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_po

sctp: fix the proc_handler for sysctl encap_port

proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_port.

Fixes: e8a3001c2120 ("sctp: add encap_port for netns sock asoc and transport")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: enable udp tunneling socks

This patch is to enable udp tunneling socks by calling
sctp_udp_sock_start() in sctp_ctrlsock_init(), and
sctp_udp_sock_stop() in sctp_ctrlsock_exit().

Also add sys

sctp: enable udp tunneling socks

This patch is to enable udp tunneling socks by calling
sctp_udp_sock_start() in sctp_ctrlsock_init(), and
sctp_udp_sock_stop() in sctp_ctrlsock_exit().

Also add sysctl udp_port to allow changing the listening
sock's port by users.

Wit this patch, the whole sctp over udp feature can be
enabled and used.

v1->v2:
- Also update ctl_sock udp_port in proc_sctp_do_udp_port()
where netns udp_port gets changed.
v2->v3:
- Call htons() when setting sk udp_port from netns udp_port.
v3->v4:
- Not call sctp_udp_sock_start() when new_value is 0.
- Add udp_port entry in ip-sysctl.rst.
v4->v5:
- Not call sctp_udp_sock_start/stop() in sctp_ctrlsock_init/exit().
- Improve the description of udp_port in ip-sysctl.rst.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: add encap_port for netns sock asoc and transport

encap_port is added as per netns/sock/assoc/transport, and the
latter one's encap_port inherits the former one's by default.
The transport's en

sctp: add encap_port for netns sock asoc and transport

encap_port is added as per netns/sock/assoc/transport, and the
latter one's encap_port inherits the former one's by default.
The transport's encap_port value would mostly decide if one
packet should go out with udp encapsulated or not.

This patch also allows users to set netns' encap_port by sysctl.

v1->v2:
- Change to define encap_port as __be16 for sctp_sock, asoc and
transport.
v2->v3:
- No change.
v3->v4:
- Add 'encap_port' entry in ip-sysctl.rst.
v4->v5:
- Improve the description of encap_port in ip-sysctl.rst.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sysctl: pass kernel pointers to ->proc_handler

Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from u

sysctl: pass kernel pointers to ->proc_handler

Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Signed-off-by: Al Viro <[email protected]>

show more ...

sctp: add support for Primary Path Switchover

This is a new feature defined in section 5 of rfc7829: "Primary Path
Switchover". By introducing a new tunable parameter:

Primary.Switchover.Max.Retr

sctp: add support for Primary Path Switchover

This is a new feature defined in section 5 of rfc7829: "Primary Path
Switchover". By introducing a new tunable parameter:

Primary.Switchover.Max.Retrans (PSMR)

The primary path will be changed to another active path when the path
error counter on the old primary path exceeds PSMR, so that "the SCTP
sender is allowed to continue data transmission on a new working path
even when the old primary destination address becomes active again".

This patch is to add this tunable parameter, 'ps_retrans' per netns,
sock, asoc and transport. It also allows a user to change ps_retrans
per netns by sysctl, and ps_retrans per sock/asoc/transport will be
initialized with it.

The check will be done in sctp_do_8_2_transport_strike() when this
feature is enabled.

Note this feature is disabled by initializing 'ps_retrans' per netns
as 0xffff by default, and its value can't be less than 'pf_retrans'
when changing by sysctl.

v3->v4:
- add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of
sysctl 'ps_retrans'.
- add a new entry for ps_retrans on ip-sysctl.txt.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add pf_expose per netns and sock and asoc

As said in rfc7829, section 3, point 12:

The SCTP stack SHOULD expose the PF state of its destination
addresses to the ULP as well as provide the

sctp: add pf_expose per netns and sock and asoc

As said in rfc7829, section 3, point 12:

The SCTP stack SHOULD expose the PF state of its destination
addresses to the ULP as well as provide the means to notify the
ULP of state transitions of its destination addresses from
active to PF, and vice versa. However, it is recommended that
an SCTP stack implementing SCTP-PF also allows for the ULP to be
kept ignorant of the PF state of its destinations and the
associated state transitions, thus allowing for retention of the
simpler state transition model of [RFC4960] in the ULP.

Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.

So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.

It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.

Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.

v1->v2:
- Fix a build warning noticed by Nathan Chancellor.
v2->v3:
- set pf_expose to UNUSED by default to keep compatible with old
applications.
v3->v4:
- add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
- change this patch to 1/5, and move sctp_assoc_control_transport
change into 2/5, as Marcelo suggested.
- use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: allow users to set netns ecn flag with sysctl

sysctl net.sctp.ecn_enable is added in this patch. It will allow
users to change the default sctp ecn flag, net.sctp.ecn_enable.

This feature was

sctp: allow users to set netns ecn flag with sysctl

sysctl net.sctp.ecn_enable is added in this patch. It will allow
users to change the default sctp ecn flag, net.sctp.ecn_enable.

This feature was also required on this thread:

http://lkml.iu.edu/hypermail/linux/kernel/0812.1/01858.html

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

proc/sysctl: add shared variables for range check

In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function us

proc/sysctl: add shared variables for range check

In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.

On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.

The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:

$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248

Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.

This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:

# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%

[[email protected]: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix net/ipv6/sysctl_net_ipv6.c]
[[email protected]: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Kees Cook <[email protected]>
Reviewed-by: Aaron Tomlin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104

Based on 1 normalized pattern(s):

this sctp implementation is free software you can redistribute it
and or modify it under the

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104

Based on 1 normalized pattern(s):

this sctp implementation is free software you can redistribute it
and or modify it under the terms of the gnu general public license
as published by the free software foundation either version 2 or at
your option any later version this sctp implementation is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with gnu cc see the file copying if not see
http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 42 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sctp: support sysctl to allow users to use stream interleave

This is the last patch for support of stream interleave, after this patch,
users could enable stream interleave by systcl -w net.sctp.int

sctp: support sysctl to allow users to use stream interleave

This is the last patch for support of stream interleave, after this patch,
users could enable stream interleave by systcl -w net.sctp.intl_enable=1.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo R. Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: remove the typedef sctp_scope_policy_t

This patch is to remove the typedef sctp_scope_policy_t and keep
it's members as an anonymous enum.

It is also to define SCTP_SCOPE_POLICY_MAX to replac

sctp: remove the typedef sctp_scope_policy_t

This patch is to remove the typedef sctp_scope_policy_t and keep
it's members as an anonymous enum.

It is also to define SCTP_SCOPE_POLICY_MAX to replace the num 3
in sysctl.c to make codes clear.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add get and set sockopt for reconf_enable

This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would
set and get asoc reconf_enable value when asoc_id is set, or it
would set and get ep

sctp: add get and set sockopt for reconf_enable

This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would
set and get asoc reconf_enable value when asoc_id is set, or it
would set and get ep reconf_enalbe value if asoc_id is 0.

It is also to add sysctl interface for users to set the default
value for reconf_enable.

After this patch, stream reconf will work.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...