netfilter: xtables: avoid NFPROTO_UNSPEC where needed

syzbot managed to call xt_cluster match via ebtables:

WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]

netfilter: xtables: avoid NFPROTO_UNSPEC where needed

syzbot managed to call xt_cluster match via ebtables:

WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40

Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.

Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.

Check all UNSPEC matches and targets for similar issues:

- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.

Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.

The MARK target is also used by arptables, so register for NFPROTO_ARP too.

While at it, bail out if connbytes fails to enable the corresponding
conntrack family.

This change passes the selftests in iptables.git.

Reported-by: [email protected]
Closes: https://lore.kernel.org/netfilter-devel/[email protected]/
Fixes: 0269ea493734 ("netfilter: xtables: add cluster match")
Signed-off-by: Florian Westphal <[email protected]>
Co-developed-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

show more ...

netfilter: x_tables: use pr ratelimiting in all remaining spots

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: add and use nf_ct_netns_get/put

currently aliased to try_module_get/_put.
Will be changed in next patch when we add functions to make use of ->net
argument to store usercount per l3proto

netfilter: add and use nf_ct_netns_get/put

currently aliased to try_module_get/_put.
Will be changed in next patch when we add functions to make use of ->net
argument to store usercount per l3proto tracker.

This is needed to avoid registering the conntrack hooks in all netns and
later only enable connection tracking in those that need conntrack.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

show more ...

netfilter: Convert pr_warning to pr_warn

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S

netfilter: Convert pr_warning to pr_warn

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

netfilter: introduce nf_conn_acct structure

Encapsulate counters for both directions into nf_conn_acct. During
that process also consistently name pointers to the extend 'acct',
not 'counters'. This

netfilter: introduce nf_conn_acct structure

Encapsulate counters for both directions into nf_conn_acct. During
that process also consistently name pointers to the extend 'acct',
not 'counters'. This patch is a cleanup.

Signed-off-by: Holger Eitzenberger <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

show more ...

netfilter: xt_connbytes: handle negation correctly

"! --connbytes 23:42" should match if the packet/byte count is not in range.

As there is no explict "invert match" toggle in the match structure,

netfilter: xt_connbytes: handle negation correctly

"! --connbytes 23:42" should match if the packet/byte count is not in range.

As there is no explict "invert match" toggle in the match structure,
userspace swaps the from and to arguments
(i.e., as if "--connbytes 42:23" were given).

However, "what <= 23 && what >= 42" will always be false.

Change things so we use "||" in case "from" is larger than "to".

This change may look like it breaks backwards compatibility when "to" is 0.
However, older iptables binaries will refuse "connbytes 42:0",
and current releases treat it to mean "! --connbytes 0:42",
so we should be fine.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

show more ...

netfilter: nf_conntrack: use atomic64 for accounting counters

We can use atomic64_t infrastructure to avoid taking a spinlock in fast
path, and remove inaccuracies while reading values in
ctnetlink_

netfilter: nf_conntrack: use atomic64 for accounting counters

We can use atomic64_t infrastructure to avoid taking a spinlock in fast
path, and remove inaccuracies while reading values in
ctnetlink_dump_counters() and connbytes_mt() on 32bit arches.

Suggested by Pablo.

Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

show more ...

netfilter: xt_connbytes: Force CT accounting to be enabled

Check at rule install time that CT accounting is enabled. Force it
to be enabled if not while also emitting a warning since this is not
the

netfilter: xt_connbytes: Force CT accounting to be enabled

Check at rule install time that CT accounting is enabled. Force it
to be enabled if not while also emitting a warning since this is not
the default state.

This is in preparation for deprecating CONFIG_NF_CT_ACCT upon which
CONFIG_NETFILTER_XT_MATCH_CONNBYTES depended being set.

Added 2 CT accounting support functions:

nf_ct_acct_enabled() - Get CT accounting state.
nf_ct_set_acct() - Enable/disable CT accountuing.

Signed-off-by: Tim Gardner <[email protected]>
Acked-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

show more ...

netfilter: xtables: deconstify struct xt_action_param for matches

In future, layer-3 matches will be an xt module of their own, and
need to set the fragoff and thoff fields. Adding more pointers wou

netfilter: xtables: deconstify struct xt_action_param for matches

In future, layer-3 matches will be an xt module of their own, and
need to set the fragoff and thoff fields. Adding more pointers would
needlessy increase memory requirements (esp. so for 64-bit, where
pointers are wider).

Signed-off-by: Jan Engelhardt <[email protected]>

show more ...

netfilter: xtables: substitute temporary defines by final name

Signed-off-by: Jan Engelhardt <[email protected]>

netfilter: xtables: shorten up return clause

The return value of nf_ct_l3proto_get can directly be returned even in
the case of success.

Signed-off-by: Jan Engelhardt <[email protected]>

netfilter: xtables: slightly better error reporting

When extended status codes are available, such as ENOMEM on failed
allocations, or subsequent functions (e.g. nf_ct_get_l3proto), passing
them up

netfilter: xtables: slightly better error reporting

When extended status codes are available, such as ENOMEM on failed
allocations, or subsequent functions (e.g. nf_ct_get_l3proto), passing
them up to userspace seems like a good idea compared to just always
EINVAL.

Signed-off-by: Jan Engelhardt <[email protected]>

show more ...

netfilter: xtables: change matches to return error code

The following semantic patch does part of the transformation:
// <smpl>
@ rule1 @
struct xt_match ops;
identifier check;
@@
ops.checkentry =

netfilter: xtables: change matches to return error code

The following semantic patch does part of the transformation:
// <smpl>
@ rule1 @
struct xt_match ops;
identifier check;
@@
ops.checkentry = check;

@@
identifier rule1.check;
@@
check(...) { <...
-return true;
+return 0;
...> }

@@
identifier rule1.check;
@@
check(...) { <...
-return false;
+return -EINVAL;
...> }
// </smpl>

Signed-off-by: Jan Engelhardt <[email protected]>

show more ...

netfilter: xtables: change xt_match.checkentry return type

Restore function signatures from bool to int so that we can report
memory allocation failures or similar using -ENOMEM rather than
always h

netfilter: xtables: change xt_match.checkentry return type

Restore function signatures from bool to int so that we can report
memory allocation failures or similar using -ENOMEM rather than
always having to pass -EINVAL back.

This semantic patch may not be too precise (checking for functions
that use xt_mtchk_param rather than functions referenced by
xt_match.checkentry), but reviewed, it produced the intended result.

// <smpl>
@@
type bool;
identifier check, par;
@@
-bool check
+int check
(struct xt_mtchk_param *par) { ... }
// </smpl>

Signed-off-by: Jan Engelhardt <[email protected]>

show more ...

netfilter: xt extensions: use pr_<level>

Signed-off-by: Jan Engelhardt <[email protected]>

netfilter: xtables: cut down on static data for family-independent extensions

Using ->family in struct xt_*_param, multiple struct xt_{match,target}
can be squashed together.

Signed-off-by: Jan Eng

netfilter: xtables: cut down on static data for family-independent extensions

Using ->family in struct xt_*_param, multiple struct xt_{match,target}
can be squashed together.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

show more ...

netfilter: xtables: move extension arguments into compound structure (3/6)

This patch does this for match extensions' destroy functions.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-of

netfilter: xtables: move extension arguments into compound structure (3/6)

This patch does this for match extensions' destroy functions.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

show more ...

netfilter: xtables: move extension arguments into compound structure (2/6)

This patch does this for match extensions' checkentry functions.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed

netfilter: xtables: move extension arguments into compound structure (2/6)

This patch does this for match extensions' checkentry functions.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

show more ...

netfilter: xtables: move extension arguments into compound structure (1/6)

The function signatures for Xtables extensions have grown over time.
It involves a lot of typing/replication, and also a bi

netfilter: xtables: move extension arguments into compound structure (1/6)

The function signatures for Xtables extensions have grown over time.
It involves a lot of typing/replication, and also a bit of stack space
even if they are not used. Realize an NFWS2008 idea and pack them into
structs. The skb remains outside of the struct so gcc can continue to
apply its optimizations.

This patch does this for match extensions' match functions.

A few ambiguities have also been addressed. The "offset" parameter for
example has been renamed to "fragoff" (there are so many different
offsets already) and "protoff" to "thoff" (there is more than just one
protocol here, so clarify).

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

show more ...

netfilter: x_tables: use NFPROTO_* in extensions

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>

netfilter: accounting rework: ct_extend + 64bit counters (v4)

Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in

netfilter: accounting rework: ct_extend + 64bit counters (v4)

Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.

This patch:
- reimplements accounting with respect to the extension infrastructure,
- makes one global version of seq_print_acct() instead of two seq_print_counters(),
- makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
- makes it possible to enable/disable it at runtime by sysctl or sysfs,
- extends counters from 32bit to 64bit,
- renames ip_conntrack_counter -> nf_conn_counter,
- enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
- set initial accounting enable state based on CONFIG_NF_CT_ACCT
- removes buggy IPCT_COUNTER_FILLING event handling.

If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".

Signed-off-by: Krzysztof Piotr Oledzki <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

rename div64_64 to div64_u64

Rename div64_64 to div64_u64 to make it consistent with the other divide
functions, so it clearly includes the type of the divide. Move its definition
to math64.h as cu

rename div64_64 to div64_u64

Rename div64_64 to div64_u64 to make it consistent with the other divide
functions, so it clearly includes the type of the divide. Move its definition
to math64.h as currently no architecture overrides the generic implementation.
They can still override it of course, but the duplicated declarations are
avoided.

Signed-off-by: Roman Zippel <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Russell King <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: David Howells <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Patrick McHardy <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[NETFILTER]: Update modules' descriptions

Updates the MODULE_DESCRIPTION() tags for all Netfilter modules,
actually describing what the module does and not just
"netfilter XYZ target".

Signed-off-b

[NETFILTER]: Update modules' descriptions

Updates the MODULE_DESCRIPTION() tags for all Netfilter modules,
actually describing what the module does and not just
"netfilter XYZ target".

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[NETFILTER]: x_tables: use %u format specifiers

Use %u format specifiers as ->family is unsigned.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <kaber@trash

[NETFILTER]: x_tables: use %u format specifiers

Use %u format specifiers as ->family is unsigned.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[NETFILTER]: x_tables: consistent and unique symbol names

Give all Netfilter modules consistent and unique symbol names.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patri

[NETFILTER]: x_tables: consistent and unique symbol names

Give all Netfilter modules consistent and unique symbol names.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...